{"title":"Body Fillers","description":"\n\u003cp\u003eAutomotive body filler restores a smooth profile after dents, corrosion removal or panel fabrication, but it is a shaping material rather than a substitute for sound metal. Common choices include general-purpose polyester filler, lightweight fine filler, aluminium-compatible products, glass-fibre-reinforced filler and finishing glaze. The right choice depends on the substrate, depth of repair, panel movement, subsequent primer system and the product maker’s stated compatibility.\u003c\/p\u003e\n\u003cp\u003eBegin with an honest assessment. Remove paint, rust, loose seam sealer and previous failed repairs far enough to expose stable material. Perforation, cracked welds and weakened structural sections need proper metal or composite repair before filler is considered. Straighten the panel as closely as practical: a thin, well-supported application is more durable and easier to contour than a deep mass used to bridge damage.\u003c\/p\u003e\n\u003cp\u003eFollow the filler technical data sheet for preparation, temperature, hardener ratio, maximum application depth and permitted substrates. Mix on a clean, non-absorbent board, folding the components together without whipping in air. Work only within the stated pot life. Apply firm initial pressure to wet the surface, then build controlled passes. Too much hardener does not create a stronger repair; it can shorten working time, distort cure and cause staining or adhesion problems.\u003c\/p\u003e\n\u003cp\u003eOnce cured, block-sand the repair through suitable grades while repeatedly checking the panel contour. Protect surrounding edges and avoid cutting through protective coatings unnecessarily. Pinholes, feather-edge lifting, soft patches, cracking or a strong uncured odour indicate a fault that should be corrected rather than buried under primer. Keep polyester dust and vapour away from skin, eyes and lungs, use extraction and suitable PPE, and consult the safety data sheet.\u003c\/p\u003e\n\u003cp\u003eBefore painting, remove dust, inspect under good directional light and seal the repair with a compatible primer system. Do not leave porous filler exposed to rain or condensation. Vehicle structure, seat-belt and suspension mounting areas demand particular caution, and repairs must not leave dangerous projections or conceal unsafe corrosion. Body fillers and related repair compounds are listed below for careful selection.\u003c\/p\u003e","products":[{"product_id":"evo-stik-30803693-foam-filler-750ml","title":"Evo-Stik Foam Filler - 750ml","description":"\u003cp\u003eThe Evo-Stik Foam Filler - 750ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Evo-stik reference 30803693 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be cut and sanded\u003c\/li\u003e\n\u003cli\u003eBonds to most building materials\u003c\/li\u003e\n\u003cli\u003eFills - seals - \u0026amp; insulates\u003c\/li\u003e\n\u003cli\u003eExpanding foam\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e342\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.891\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/30803693-08-14_2007_06_38.pdf?v=1771521863\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"EVO-STIK","offers":[{"title":"1","offer_id":56339020874108,"sku":"30803693","price":16.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/132610.jpg?v=1771521867"},{"product_id":"teroson-2268385-teroson-up-130-chemical-metal-739g","title":"Teroson UP 130","description":"\u003cp\u003eThe Teroson UP 130 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Teroson reference 2268385 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eResistance to water, salt water, oil, fuel and to most weak acids and chemicals\u003c\/li\u003e\n\u003cli\u003eSets rock-hard\u003c\/li\u003e\n\u003cli\u003eMulti-purpose\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.843\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nWith resistance to water, salt water, oil, fuel and to most weak acids and chemicals. It can repair gasoline tanks, radiators, concrete, housings and castings and many more. Suitable substrates include steel, aluminum, galvanized surfaces, glass fiber, copper and tin.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/MSDS_202268385_20en_GB.pdf?v=1771521241\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"TEROSON","offers":[{"title":"1","offer_id":56339091292540,"sku":"2268385","price":20.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/2268385.jpg?v=1771521245"},{"product_id":"isopon-apl-3-applicators-for-body-filler-x3","title":"Isopon Body Filler Applicators - Pack Of 3","description":"\u003cp\u003eThe Isopon Body Filler Applicators - Pack Of 3 is a vehicle-care or workshop preparation product that is formulated for the cleaning, preparation, protection or finishing task stated in its product data. Use Isopon reference APL\/3 when cross-checking the part. Check the pack size, surface and material suitability, application method, drying or curing requirements and safety instructions before use; test on an inconspicuous area where appropriate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAssorted sizes\u003c\/li\u003e\n\u003cli\u003ePack of 3\u003c\/li\u003e\n\u003cli\u003ePlastic applicators with a flat leading edge to give a superior finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.034\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find Isopon’s range of body filler and repair pastes invaluable. With this body filler applicator pack from Isopon you can quickly and easily make professional looking, permanent repairs. The applicators come in an assorted pack of 3 each in a different size. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.","brand":"ISOPON","offers":[{"title":"1","offer_id":56339091620220,"sku":"APL\/3","price":4.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/APL-3.jpg?v=1771531986"},{"product_id":"u-pol-bagdol-1-dolphin-finishing-glaze-440ml","title":"U-Pol Dolphin Finishing Glaze - 440ml","description":"\u003cp\u003eThe U-Pol Dolphin Finishing Glaze - 440ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use U-pol reference BAGDOL\/1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides the perfect surface for painting\u003c\/li\u003e\n\u003cli\u003eSelf levelling properties eliminate pinholes and small imperfections, ideal for filling stone chips\u003c\/li\u003e\n\u003cli\u003eSpecially formulated for the professional user and combines excellent levelling properties together with easy sanding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.582\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find U-Pol’s range of body fillers, repair pastes and Fastglas invaluable. This Dolphin finishing glaze from U-Pol is a premium self-levelling glaze that is designed to provide the perfect surface for painting. It has been specially formulated for the professional user and combines excellent levelling properties together with easy sanding. The self-levelling properties eliminate pinholes and small imperfections; ideal for filling stone chips. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/BAGDOL-1.pdf?v=1771535141\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339091980668,"sku":"BAGDOL\/1","price":18.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/BAGDOL-1.jpg?v=1771535144"},{"product_id":"plastikit-cat-5-plastikit-prof-resin-hardener-50ml","title":"Plastikit Professional Resin Hardener - 50ml","description":"\u003cp\u003eThe Plastikit Professional Resin Hardener - 50ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Plastikit reference CAT\/5 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlease note that this pack contains the hardener only\u003c\/li\u003e\n\u003cli\u003eStable and easy to use\u003c\/li\u003e\n\u003cli\u003ePlastikit range is ideal for laminating or repairing large glass fibre areas on boats or car panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.071\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Plastikit fibre glass repair products from UPol you can be sure that you have chosen the right tool for the job. This Plastikit professional resin hardener is perfect for use with boats or car panels. The solution is stable and easy to use. Comes in a 50ml bottle. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CAT-5_20UPol_20Plastikit_20Resin_20MSDS.pdf?v=1771535719\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"PLASTIKIT","offers":[{"title":"1","offer_id":56339092570492,"sku":"CAT\/5","price":14.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CAT-5.jpg?v=1771535723"},{"product_id":"holts-cat13-cataloy-knifing-putty-100g","title":"Holts Cataloy Knifing Putty - 100g","description":"\u003cp\u003eThe Holts Cataloy Knifing Putty - 100g is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Holts reference CAT13 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCataloy knifing putty - 100g\u003c\/li\u003e\n\u003cli\u003eGives extra smooth finish prior to painting\u003c\/li\u003e\n\u003cli\u003eFills surface scratches, chips \u0026amp; scores\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.134\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CAT13_20CATALOY_20KNIFING_20PUTTY-English_20_UK_20_20ROI.pdf?v=1771535735\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"HOLTS","offers":[{"title":"1","offer_id":56339093062012,"sku":"CAT13","price":9.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CAT13.jpg?v=1771535739"},{"product_id":"u-pol-easy-7-easy-one-body-filler-3-litre-tin","title":"U-Pol Easy One Body Filler - 3 Litre","description":"\u003cp\u003eThe U-Pol Easy One Body Filler - 3 Litre is a vehicle-care or workshop preparation product that is formulated for the cleaning, preparation, protection or finishing task stated in its product data. Its catalogue specification records 1 minimum age. Use U-pol reference EASY\/7 when cross-checking the part. Check the pack size, surface and material suitability, application method, drying or curing requirements and safety instructions before use; test on an inconspicuous area where appropriate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be shaped and sanded for a smooth bodywork finish ready to be primed and painted\u003c\/li\u003e\n\u003cli\u003ePolyester compound filler, leaves a pinhole free finish\u003c\/li\u003e\n\u003cli\u003eSize: 3 litre tin\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nWhen thinking about repairing any bodywork damage, you need to first fill the area in order to create a smooth finish. UPol have created a product which not only be used for large and small repairs, but also leaves a professional looking finish. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/EASY-7.pdf?v=1771538901\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339093389692,"sku":"EASY\/7","price":36.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/EASY-7.jpg?v=1771538904"},{"product_id":"u-pol-fant-3-ultra-lightweight-filler-3l","title":"U-Pol Fantastic Ultra Lightweight Body Filler - 3 Litre","description":"\u003cp\u003eThe U-Pol Fantastic Ultra Lightweight Body Filler - 3 Litre is a vehicle-care or workshop preparation product that is formulated for the cleaning, preparation, protection or finishing task stated in its product data. Its catalogue specification records 1 minimum age. Use U-pol reference FANT\/3 when cross-checking the part. Check the pack size, surface and material suitability, application method, drying or curing requirements and safety instructions before use; test on an inconspicuous area where appropriate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 3 litre tin\u003c\/li\u003e\n\u003cli\u003eUses latest resin technology for a pinhole free very easy sanding product even after 24 hours\u003c\/li\u003e\n\u003cli\u003eAdheres directly to a variety of substrates including galvanised and some plastics\u003c\/li\u003e\n\u003cli\u003eExcellent spreadability and super easy sanding properties\u003c\/li\u003e\n\u003cli\u003eMultifunction body filler that can be used for deep filling or finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e177\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e177\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.96\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find U-Pol’s range of body fillers, repair pastes and Fastglas invaluable. The Fantastic ultra-lightweight body filler from U-Pol is a multifunctional filler that can be used for deep filling or finishing. The excellent spreadability and super easy sanding properties make this perfect for a variety of substrates including galvanised and some plastics. The latest resin technology provides a pinhole free, easy sanding product in as little as 24 hours. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/FANT-3.pdf?v=1771540078\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339094012284,"sku":"FANT\/3","price":42.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/FANT-3.jpg?v=1771540082"},{"product_id":"plastikit-fibre-5-plastikit-prof-glass-fibre-5-mat-roll","title":"Plastikit Professional Glass Fibre Mat","description":"\u003cp\u003eThe Plastikit Professional Glass Fibre Mat is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 5m2 size. Use Plastikit reference FIBRE\/5 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be used in large number of applications\u003c\/li\u003e\n\u003cli\u003eImpervious to oil, water and many acids\u003c\/li\u003e\n\u003cli\u003eEasy to cut with scissors\u003c\/li\u003e\n\u003cli\u003eSets Quickly within 20-30 minutes\u003c\/li\u003e\n\u003cli\u003eForms super tough reinforced plastic when combined with Glass Fibre Resin\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e5m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Plastkit fibre glass repair products from UPol you can be sure that you have chosen the right tool for the job. This Plastikit Glass Fibre Repair kit contains a 5 mete5r roll you will need to make those professional looking repairs. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.","brand":"PLASTIKIT","offers":[{"title":"1","offer_id":56339094307196,"sku":"FIBRE\/5","price":59.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/FIBRE-5.jpg?v=1771540353"},{"product_id":"fastglas-gfm-fastglas-glassfibre-mat-0-55m","title":"Fastglas Glass Fibre Mat - 0.55m","description":"\u003cp\u003eThe Fastglas Glass Fibre Mat - 0.55m is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 0.55m2 size. Use Fastglas reference GFM when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be used with Glass Fibre tissue to form glass fibre reinforced plastic\u003c\/li\u003e\n\u003cli\u003eImpervious to oil, water \u0026amp; many acids\u003c\/li\u003e\n\u003cli\u003eSets within 20-30 minutes\u003c\/li\u003e\n\u003cli\u003eEasy to cut and shape with scissors\u003c\/li\u003e\n\u003cli\u003e0.55m squared\u003c\/li\u003e\n\u003cli\u003eFor use with Fastglas Resin to repair holes, cracks and leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e0.55m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.1859\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Fastglas fibre glass repair products from UPol you can be sure that you have chosen the right tool for the job. This Fastglas Glass Fibre mat is strong, high quality matting for construction of GRP. It is to be used with Fastglas resin and will set within 20-30 minutes. Once dry your repairs will be a strong bond of polyester resin and glass fibre; that will be impervious to water, oil and many acids, so you can be confident that your repairs will last. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/GFM_20_20GFT_20Glass_20Fibre_20MSDS.pdf?v=1771540941\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"FASTGLAS","offers":[{"title":"1","offer_id":56339094569340,"sku":"GFM","price":9.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/GFM.jpg?v=1771540945"},{"product_id":"fastglas-gft-fastglas-glassfibre-tissue-1m","title":"Fastglas Glass Fibre Tissue - 1m","description":"\u003cp\u003eThe Fastglas Glass Fibre Tissue - 1m is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1m2 size. Use Fastglas reference GFT when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor use with fiberglass resin\u003c\/li\u003e\n\u003cli\u003eCreates a smoother finish\u003c\/li\u003e\n\u003cli\u003eFine glass fibre tissue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.062\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Fastglas fibre glass repair products from David’s you can be sure that you have chosen the right tool for the job. This Fastglas Glass Fibre tissue is strong, high quality matting for construction of GRP. It is to be used with Fastglas resin and will set within 20-30 minutes. Once dry your repairs will be a strong bond of polyester resin and glass fibre; that will be impervious to water, oil and many acids, so you can be confident that your repairs will last. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/GFM_20_20GFT_20Glass_20Fibre_20MSDS.pdf?v=1771540941\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"FASTGLAS","offers":[{"title":"1","offer_id":56339094864252,"sku":"GFT","price":7.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/GFT.jpg?v=1771540946"},{"product_id":"fastglas-gl-la-d-fastglas-glass-fibre-kit-senior","title":"Fastglas Glass Fibre Senior Kit","description":"\u003cp\u003eThe Fastglas Glass Fibre Senior Kit is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Senior size and 1 minimum age. Use Fastglas reference GL\/LA\/D when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis pack comes complete with the following: resin, hardener, matting, mixing cup, gloves, stirrer and application brush\u003c\/li\u003e\n\u003cli\u003eRepairs will be completed and dry in less than 30 minutes after application\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow on pack instructions\u003c\/li\u003e\n\u003cli\u003eDesigned for fixing damaged body work\u003c\/li\u003e\n\u003cli\u003eQuick and easy to use\u003c\/li\u003e\n\u003cli\u003eUse with glass fibre mats and tissues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eSenior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e185\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.2375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Fastglas fibre glass repair products from David’s you can be sure that you have chosen the right tool for the job. This Fastglas Glass Fibre Repair kit contains everything you will need to make those professional looking repairs to any damaged body work. Supplied with easy to follow, detailed on pack instructions, your repairs will be completed and dry in less than 30 minutes after application. Once dry your repairs will be a strong bond of polyester resin and glass fibre; that will be impervious to water, oil and many acids, so you can be confident that your repairs will last. This pack comes complete with the following 500ml of resin, hardener, matting, mixing cup, gloves, stirrer and application brush. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/GL-LA-D.pdf?v=1771540968\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"FASTGLAS","offers":[{"title":"1","offer_id":56339095159164,"sku":"GL\/LA\/D","price":27.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/GL-LA-D.jpg?v=1771540971"},{"product_id":"fastglas-gl-sm-d-fastglas-glass-fibre-kit-junior","title":"Fastglas Glass Fibre Junior Kit","description":"\u003cp\u003eThe Fastglas Glass Fibre Junior Kit is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Junior size and 1 minimum age. Use Fastglas reference GL\/SM\/D when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis pack comes complete with the following: resin, hardener, matting, mixing cup, gloves, stirrer and application brush\u003c\/li\u003e\n\u003cli\u003eRepairs will be completed and dry in less than 30 minutes after application\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow on pack instructions\u003c\/li\u003e\n\u003cli\u003eDesigned for fixing damaged body work\u003c\/li\u003e\n\u003cli\u003eQuick and easy to use\u003c\/li\u003e\n\u003cli\u003eUse with glass fibre mats and tissues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eJunior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e185\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.6133\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Fastglas fibre glass repair products from David’s you can be sure that you have chosen the right tool for the job. This Fastglas Glass Fibre Repair kit contains everything you will need to make those professional looking repairs to any damaged body work. Supplied with easy to follow, detailed on pack instructions, your repairs will be completed and dry in less than 30 minutes after application. Once dry your repairs will be a strong bond of polyester resin and glass fibre; that will be impervious to water, oil and many acids, so you can be confident that your repairs will last. This pack comes complete with the following 250ml of resin, hardener, matting, mixing cup, gloves, stirrer and application brush. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/GL-SM-D.pdf?v=1771540971\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"FASTGLAS","offers":[{"title":"1","offer_id":56339095486844,"sku":"GL\/SM\/D","price":17.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/GL-SM-D.jpg?v=1771540975"},{"product_id":"isopon-h3840-s-p38-p40-metalik-hardener-20g","title":"Isopon BPO Hardener - 20g","description":"\u003cp\u003eThe Isopon BPO Hardener - 20g is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Isopon reference H3840\/S when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with clear usage instructions\u003c\/li\u003e\n\u003cli\u003eUnique packaging for accurate dispensing, safe and secure storage\u003c\/li\u003e\n\u003cli\u003eIdeal for spot repairs\u003c\/li\u003e\n\u003cli\u003eStable and easy to use\u003c\/li\u003e\n\u003cli\u003eVery effective and rapid reacting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.0305\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find U-Pol’s range of body fillers, repair pastes and Fastglas invaluable. This Metalik hardener from U-Pol is very effective and rapid reacting. The stable and easy to use tube is ideal for spot repairs. Comes in a 20g tube. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/H3840-S.pdf?v=1771541714\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339095847292,"sku":"H3840\/S","price":6.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/H3840-S.jpg?v=1771541718"},{"product_id":"isopon-lkstop-s-isopon-leak-stop-250ml","title":"Isopon Leak Stop 250ml","description":"\u003cp\u003eThe Isopon Leak Stop 250ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Isopon reference LKSTOP\/S when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ecoverage 1m2 at 2mm depth\u003c\/li\u003e\n\u003cli\u003efast drying\u003c\/li\u003e\n\u003cli\u003eresists fuel, oils, and salt water\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.614\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nISOPON Leaks Stop is the ideal filler to seal and repair Leaks, with a cure time of only 30 minutes, Leak Stop is oil, water, and fuel reistant, and also resists temperatures of up to 120c","brand":"ISOPON","offers":[{"title":"1","offer_id":56339096240508,"sku":"LKSTOP\/S","price":16.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/LKSTOP-S.jpg?v=1771542819"},{"product_id":"isopon-met-s-alloy-wheel-filler-250ml-tin","title":"Isopon Alloy Wheel Filler - 250ml","description":"\u003cp\u003eThe Isopon Alloy Wheel Filler - 250ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Supplied with suitable hardener and usage instructions technical info and 1 minimum age. Use Isopon reference MET\/S when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to sand to a fine finish\u003c\/li\u003e\n\u003cli\u003eAchieves a tough, smooth repair that is ready to prime and paint\u003c\/li\u003e\n\u003cli\u003eHigh adhesion across most metals\u003c\/li\u003e\n\u003cli\u003eA versatile filler that's strengthened with real aluminium to repair and prime scratches and scuffs in most types of alloy wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eSupplied with suitable hardener and usage instructions\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.556\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find Isopon Metalik invaluable as a car body filler and repair paste. This tin of Isopon Metalik comes in a 250ml tin and includes hardener and a plastic applicator to help smooth the filler once applied. Not only is it a great filler it contains aluminium for a strong professional highly polished looking finish and is easy to sand making repairs easier. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/MET-S.pdf?v=1771543006\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339096502652,"sku":"MET\/S","price":16.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/MET-S.jpg?v=1771543010"},{"product_id":"isopon-mtfx-1-isopon-metal-fix-filler-560ml","title":"Isopon Metal Fix 560ml","description":"\u003cp\u003eThe Isopon Metal Fix 560ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Isopon reference MTFX\/1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eeasy to shape \u0026amp; sand\u003c\/li\u003e\n\u003cli\u003euniversal repairs\u003c\/li\u003e\n\u003cli\u003eresists water, oils, and most chemicals\u003c\/li\u003e\n\u003cli\u003eexcellent adhiesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.092\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\ncontaining aluminium for extra toughness ISOPON Metal fix is a 2 part filler paste suitable for repairs on most metal surface types","brand":"ISOPON","offers":[{"title":"1","offer_id":56339096928636,"sku":"MTFX\/1","price":16.74,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/MTFX-1.jpg?v=1771543384"},{"product_id":"isopon-mtfx-s-isopon-metal-fix-filler-250ml","title":"Isopon Metal Fix 250ml","description":"\u003cp\u003eThe Isopon Metal Fix 250ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Isopon reference MTFX\/S when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eeasy to shape \u0026amp; sand\u003c\/li\u003e\n\u003cli\u003euniversal repairs\u003c\/li\u003e\n\u003cli\u003eresists water, oils, and most chemicals\u003c\/li\u003e\n\u003cli\u003eexcellent adhiesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\ncontaining aluminium for extra toughness ISOPON Metal fix is a 2 part filler paste suitable for repairs on most metal surface types","brand":"ISOPON","offers":[{"title":"1","offer_id":56339097354620,"sku":"MTFX\/S","price":15.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/MTFX-S.jpg?v=1771543386"},{"product_id":"isopon-p38-1-p38-body-filler-600ml-tin","title":"Isopon P38 Body Filler - 600ml","description":"\u003cul\u003e\n\u003cli\u003eIdeal for larger repairs\u003c\/li\u003e\n\u003cli\u003eSmooth spreading and pinhole free\u003c\/li\u003e\n\u003cli\u003ePolyester body filler with good filling properties\u003c\/li\u003e\n\u003cli\u003eSupplied with suitable hardener\u003c\/li\u003e\n\u003cli\u003eIdeal for repairing dents and scratches in most metals, fibre glass, wood etc\u003c\/li\u003e\n\u003cli\u003e2K very easy sanding polyester body filler\u003c\/li\u003e\n\u003cli\u003eIncludes a step by step repair guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.926\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find Isopon P.38 invaluable as a car body filler and repair waste. This Isopon P38 comes in a 600ml tin and includes hardener and a plastic applicator to help smooth the filler once applied. Can also be applied in the home. Consult the user guide before use.\u003cp\u003eU-POL is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-POL is committed to consistently providing customers with products of the quality professionals demand . U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003c\/p\u003e\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P38-S.pdf?v=1771547515\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339097649532,"sku":"P38\/1","price":15.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P38-1.jpg?v=1771547519"},{"product_id":"isopon-p38-2-p38-body-filler-1-2l-tin","title":"Isopon P38 Body Filler - 1.2 Litre","description":"\u003cul\u003e\n\u003cli\u003eIdeal for larger repairs\u003c\/li\u003e\n\u003cli\u003eSmooth spreading and pinhole free\u003c\/li\u003e\n\u003cli\u003ePolyester body filler with good filling properties\u003c\/li\u003e\n\u003cli\u003eSupplied with suitable hardener\u003c\/li\u003e\n\u003cli\u003eIdeal for repairing dents and scratches in most metals, fibre glass, wood etc\u003c\/li\u003e\n\u003cli\u003e2K very easy sanding polyester body filler\u003c\/li\u003e\n\u003cli\u003eIncludes a step by step repair guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e103\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find Isopon P.38 invaluable as a car body filler and repair waste. This Isopon P38 comes in a 1.2 litre tin and includes hardener and a plastic applicator to help smooth the filler once applied. Can also be applied in the home. Consult the user guide before use.\u003cp\u003eU-POL is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-POL is committed to consistently providing customers with products of the quality professionals demand . U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003c\/p\u003e\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P38-S.pdf?v=1771547515\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339098042748,"sku":"P38\/2","price":30.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P38-2.jpg?v=1771547529"},{"product_id":"isopon-p38-4-p38-body-filler-2-25l-tin","title":"Isopon P38 Body Filler - 2.25 Litre","description":"\u003cul\u003e\n\u003cli\u003eIdeal for larger repairs\u003c\/li\u003e\n\u003cli\u003eSmooth spreading and pinhole free\u003c\/li\u003e\n\u003cli\u003ePolyester body filler with good filling properties\u003c\/li\u003e\n\u003cli\u003eSupplied with suitable hardener\u003c\/li\u003e\n\u003cli\u003eIdeal for repairing dents and scratches in most metals, fibre glass, wood etc\u003c\/li\u003e\n\u003cli\u003e2K very easy sanding polyester body filler\u003c\/li\u003e\n\u003cli\u003eIncludes a step by step repair guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find Isopon P.38 invaluable as a car body filler and repair waste. This Isopon P38 comes in a 2.25 litre tin and includes hardener and a plastic applicator to help smooth the filler once applied. Can also be applied in the home. Consult the user guide before use.\u003cp\u003eU-POL is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-POL is committed to consistently providing customers with products of the quality professionals demand . U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003c\/p\u003e\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P38-S.pdf?v=1771547515\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339098272124,"sku":"P38\/4","price":34.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P38-4.jpg?v=1771547530"},{"product_id":"isopon-p38-s-p38-body-filler-250ml-tin","title":"Isopon P38 Body Filler - 250ml","description":"\u003cul\u003e\n\u003cli\u003eIdeal for larger repairs\u003c\/li\u003e\n\u003cli\u003eSmooth spreading and pinhole free\u003c\/li\u003e\n\u003cli\u003ePolyester body filler with good filling properties\u003c\/li\u003e\n\u003cli\u003eSupplied with suitable hardener\u003c\/li\u003e\n\u003cli\u003eIdeal for repairing dents and scratches in most metals, fibre glass, wood etc\u003c\/li\u003e\n\u003cli\u003e2K very easy sanding polyester body filler\u003c\/li\u003e\n\u003cli\u003eIncludes a step by step repair guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find Isopon P.38 invaluable as a car body filler and repair waste. This Isopon P38 comes in a 250ml tin and includes hardener and a plastic applicator to help smooth the filler once applied. Can also be applied in the home. Consult the user guide before use.\u003cp\u003eU-POL is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-POL is committed to consistently providing customers with products of the quality professionals demand . U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003c\/p\u003e\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P38-S.pdf?v=1771547515\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339098665340,"sku":"P38\/S","price":11.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P38-S.jpg?v=1771547533"},{"product_id":"isopon-p40-1-p40-glass-fibre-600ml-tin","title":"Isopon P40 Glass Fibre - 600ml","description":"\u003cp\u003eThe Isopon P40 Glass Fibre - 600ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Isopon reference P40\/1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlso suitable for filling and bonding wood, concrete, ceramics, fibre glass, brick and GRP\u003c\/li\u003e\n\u003cli\u003eSets hard quickly, ready for shaping and painting\u003c\/li\u003e\n\u003cli\u003eCreates strong, watertight repairs\u003c\/li\u003e\n\u003cli\u003eSupplied with hardening solution\u003c\/li\u003e\n\u003cli\u003eSuitable for use with all metals including galvanised steel\u003c\/li\u003e\n\u003cli\u003e2K polyester bridging compound reinforced with glass fibre\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. Isopon P40 is your permanent answer to holes, splits and cracks in your car’s bodywork. Easy to apply, it is extremely strong, lightweight and weather-proof and will bond fast and permanently to metal and glass fibre. This Isopon P40 comes in a 600ml tin and includes hardener and a plastic applicator to help smooth the filler once applied. Can also be applied in the home. Consult the user guide before use. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P40-1.pdf?v=1771547532\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339098993020,"sku":"P40\/1","price":18.37,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P40-1.jpg?v=1771547536"},{"product_id":"u-pol-p40-100-p40-body-filler-for-holes-100-ml-tube","title":"P40 Body Filler For Holes 100 Ml Tube","description":"\u003cp\u003eThe P40 Body Filler For Holes 100 Ml Tube is a vehicle-care or workshop preparation product that is formulated for the cleaning, preparation, protection or finishing task stated in its product data. Its catalogue specification records 1 minimum age. Use U-pol reference P40\/100 when cross-checking the part. Check the pack size, surface and material suitability, application method, drying or curing requirements and safety instructions before use; test on an inconspicuous area where appropriate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be used to Bridge Holes\u003c\/li\u003e\n\u003cli\u003eTough, Durable, easy sand\u003c\/li\u003e\n\u003cli\u003e100ml pack\u003c\/li\u003e\n\u003cli\u003eBody filler for holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.1961\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nP40 Body filler for Holes is the Ideal choice for repairing rust holes up to 75mm wide in most types of metal","brand":"U-POL","offers":[{"title":"1","offer_id":56339099353468,"sku":"P40\/100","price":15.96,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P40-100.jpg?v=1771547538"},{"product_id":"isopon-p40-2-p40-glass-fibre-1l-tin","title":"Isopon P40 Glass Fibre - 1 Litre","description":"\u003cul\u003e\n\u003cli\u003eAlso suitable for filling and bonding wood, concrete, ceramics, fibre glass, brick and GRP\u003c\/li\u003e\n\u003cli\u003eSets hard quickly, ready for shaping and painting\u003c\/li\u003e\n\u003cli\u003eCreates strong, watertight repairs\u003c\/li\u003e\n\u003cli\u003eSupplied with hardening solution\u003c\/li\u003e\n\u003cli\u003eSuitable for use with all metals including galvanised steel\u003c\/li\u003e\n\u003cli\u003e2K polyester bridging compound reinforced with glass fibre\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.58\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. Isopon P40 is your permanent answer to holes, splits and cracks in your car’s bodywork. Easy to apply, it is extremely strong, lightweight and weather-proof and will bond fast and permanently to metal and glass fibre. This Isopon P40 comes in a 1 litre tin and includes hardener and a plastic applicator to help smooth the filler once applied. Can also be applied in the home. Consult the user guide before use.\u003cp\u003eU-POL is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-POL is committed to consistently providing customers with products of the quality professionals demand . U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003c\/p\u003e\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P40-1.pdf?v=1771547532\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339099648380,"sku":"P40\/2","price":30.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P40-2.jpg?v=1771547539"},{"product_id":"isopon-p40-4-p40-glass-fibre-1-85l-tin","title":"Isopon P40 Glass Fibre - 1.85 Litre","description":"\u003cp\u003eThe Isopon P40 Glass Fibre - 1.85 Litre is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Isopon reference P40\/4 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlso suitable for filling and bonding wood, concrete, ceramics, fibre glass, brick and GRP\u003c\/li\u003e\n\u003cli\u003eSets hard quickly, ready for shaping and painting\u003c\/li\u003e\n\u003cli\u003eCreates strong, watertight repairs\u003c\/li\u003e\n\u003cli\u003eSupplied with hardening solution\u003c\/li\u003e\n\u003cli\u003eSuitable for use with all metals including galvanised steel\u003c\/li\u003e\n\u003cli\u003e2K polyester bridging compound reinforced with glass fibre\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. Isopon P40 is your permanent answer to holes, splits and cracks in your car’s bodywork. Easy to apply, it is extremely strong, lightweight and weather-proof and will bond fast and permanently to metal and glass fibre. This Isopon P40 comes in a 1.85 litre tin and includes hardener and a plastic applicator to help smooth the filler once applied. Can also be applied in the home. Consult the user guide before use. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P40-1.pdf?v=1771547532\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339100008828,"sku":"P40\/4","price":38.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P40-4.jpg?v=1771547540"},{"product_id":"isopon-p40-s-p40-glass-fibre-250ml-tin","title":"Isopon P40 Glass Fibre - 250ml","description":"\u003cp\u003eThe Isopon P40 Glass Fibre - 250ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Isopon reference P40\/S when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlso suitable for filling and bonding wood, concrete, ceramics, fibre glass, brick and GRP\u003c\/li\u003e\n\u003cli\u003eSets hard quickly, ready for shaping and painting\u003c\/li\u003e\n\u003cli\u003eCreates strong, watertight repairs\u003c\/li\u003e\n\u003cli\u003eSupplied with hardening solution\u003c\/li\u003e\n\u003cli\u003eSuitable for use with all metals including galvanised steel\u003c\/li\u003e\n\u003cli\u003e2K polyester bridging compound reinforced with glass fibre\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.476\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. Isopon P40 is your permanent answer to holes, splits and cracks in your car’s bodywork. Easy to apply, it is extremely strong, lightweight and weather-proof and will bond fast and permanently to metal and glass fibre. This Isopon P40 comes in a 250ml tin and includes hardener and a plastic applicator to help smooth the filler once applied. Can also be applied in the home. Consult the user guide before use. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P40-1.pdf?v=1771547532\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339100303740,"sku":"P40\/S","price":13.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P40_S.jpg?v=1771547542"},{"product_id":"isopon-pbf-100-plastic-bumper-filler-100-ml-tube","title":"Isopon Plastic Bumper Repair Kit","description":"\u003cp\u003eThe Isopon Plastic Bumper Repair Kit is a replacement body or interior component that restores the mechanical, protective or finishing function identified for its fitting location. Its catalogue specification records 1 minimum age. Use Isopon reference PBF\/100 when cross-checking the part. Confirm the reference, colour or finish, fitting side, mounting details and vehicle body application before ordering, because visually similar parts can use different fixings or connectors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull instructions on the back of the box\u003c\/li\u003e\n\u003cli\u003eHighly flexible with excellent adhesion\u003c\/li\u003e\n\u003cli\u003eRepair scratches and scuffs in plastic bumpers at home\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2488\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThis ISOPON Plastic Bumper Repair Kit contains everything you need to repair and prime scratches and scuffs in most types of plastic. The pre-measured sachets make mixing simple and it can be easily sanded and shaped to the exact bumper contour. Highly flexible with excellent adhesion, the filler gives a smooth durable repair that’s ready to prime.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PBF-PBX.pdf?v=1771547784\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339100664188,"sku":"PBF\/100","price":15.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PBF-100.jpg?v=1771547787"},{"product_id":"isopon-pbf-250-plastic-bumper-filler-250ml","title":"Isopon Plastic Bumper Filler - 250ml","description":"\u003cp\u003eThe Isopon Plastic Bumper Filler - 250ml is a replacement body or interior component that restores the mechanical, protective or finishing function identified for its fitting location. Its catalogue specification records Contains: 1 x 250ml tin of Bumper filler, 1 x 10g hardener, 1 x small applicator, 1 x leaflet technical info and 1 minimum age. Use Isopon reference PBF\/250 when cross-checking the part. Confirm the reference, colour or finish, fitting side, mounting details and vehicle body application before ordering, because visually similar parts can use different fixings or connectors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly flexible with excellent adhesion\u003c\/li\u003e\n\u003cli\u003eAchieve a smooth, durable repair that's ready to prime\u003c\/li\u003e\n\u003cli\u003eEasily sanded and shaped to the exact bumper contour\u003c\/li\u003e\n\u003cli\u003eA flexible, easy to use filler that's been specially formulated to repair scratches and scuffs in most types of plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eContains: 1 x 250ml tin of Bumper filler, 1 x 10g hardener, 1 x small applicator, 1 x leaflet\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.6319\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nDamaged bodywork can be a car owner's nightmare, and despite the best care can sometimes be unavoidable. With professional repairs an expensive option, Isopon Plastic Bumper Filler 250ml is the ideal solution for quick and easy permanent repairs. Comprised of a highly adhesive, flexible compound, Isopon Plastic Bumper Filler can be easily sanded and shaped to the to the bumper contour, leaving a professional looking repair ready for priming and painting. U-Pol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PBF-PBX.pdf?v=1771547784\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339100860796,"sku":"PBF\/250","price":18.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PBF_250.jpg?v=1771547789"},{"product_id":"fastglas-re-la-fastglas-resin-500ml-tin","title":"Fastglas Resin - 500ml","description":"\u003cp\u003eThe Fastglas Resin - 500ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Fastglas reference RE\/LA when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRepairs will be completed and dry in less than 30 minutes after application\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow on pack instructions\u003c\/li\u003e\n\u003cli\u003eDesigned for fixing damaged body work\u003c\/li\u003e\n\u003cli\u003eQuick and easy to use\u003c\/li\u003e\n\u003cli\u003eUse with glass fibre mats and tissues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e57\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e153\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Fastglas fibre glass repair products from David’s you can be sure that you have chosen the right tool for the job. For use with glass fibre mats and tissue Fastglas Resin is a quick and easy solution for fixing damaged body work. Supplied with easy to follow on pack instructions, your repairs will be completed and dry in less than 30 minutes after application. Once dry your repairs will be a strong bond of polyester resin and glass fibre; that will be impervious to water, oil and many acids, so you can be confident that your repairs will last. This product comes in a 500ml tin. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RE-SM.pdf?v=1771550826\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"FASTGLAS","offers":[{"title":"1","offer_id":56339101679996,"sku":"RE\/LA","price":18.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RE_LA.jpg?v=1771550831"},{"product_id":"fastglas-re-sm-fastglas-resin-250ml-tin","title":"Fastglas Resin - 250ml","description":"\u003cp\u003eThe Fastglas Resin - 250ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Fastglas reference RE\/SM when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRepairs will be completed and dry in less than 30 minutes after application\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow on pack instructions\u003c\/li\u003e\n\u003cli\u003eDesigned for fixing damaged body work\u003c\/li\u003e\n\u003cli\u003eQuick and easy to use\u003c\/li\u003e\n\u003cli\u003eUse with glass fibre mats and tissues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.346\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Fastglas fibre glass repair products from David’s you can be sure that you have chosen the right tool for the job. For use with glass fibre mats and tissue Fastglas Resin is a quick and easy solution for fixing damaged body work. Supplied with easy to follow on pack instructions, your repairs will be completed and dry in less than 30 minutes after application. Once dry your repairs will be a strong bond of polyester resin and glass fibre; that will be impervious to water, oil and many acids, so you can be confident that your repairs will last. This product comes in a 250ml tin. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RE-SM.pdf?v=1771550826\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"FASTGLAS","offers":[{"title":"1","offer_id":56339102105980,"sku":"RE\/SM","price":14.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RE-SM.jpg?v=1771550832"},{"product_id":"fastglas-re-xl-fastglas-resin-1l-tin","title":"Fastglas Resin - 1 Litre","description":"\u003cp\u003eThe Fastglas Resin - 1 Litre is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Fastglas reference RE\/XL when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRepairs will be completed and dry in less than 30 minutes after application\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow on pack instructions\u003c\/li\u003e\n\u003cli\u003eDesigned for fixing damaged body work\u003c\/li\u003e\n\u003cli\u003eQuick and easy to use\u003c\/li\u003e\n\u003cli\u003eUse with glass fibre mats and tissues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e188\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Fastglas fibre glass repair products from David’s you can be sure that you have chosen the right tool for the job. For use with glass fibre mats and tissue Fastglas Resin is a quick and easy solution for fixing damaged body work. Supplied with easy to follow on pack instructions, your repairs will be completed and dry in less than 30 minutes after application. Once dry your repairs will be a strong bond of polyester resin and glass fibre; that will be impervious to water, oil and many acids, so you can be confident that your repairs will last. This product comes in a 1ltr tin. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RE-SM.pdf?v=1771550826\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"FASTGLAS","offers":[{"title":"1","offer_id":56339102335356,"sku":"RE\/XL","price":24.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RE_XL.jpg?v=1771550834"},{"product_id":"u-pol-roc-s-rocket-paint-accelerator","title":"U-Pol ROC\/S 250ml bottle","description":"\u003cp\u003eThe U-Pol ROC\/S 250ml bottle is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. It is listed in the maintenance product category. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatable with most 2K coatings\u003c\/li\u003e\n\u003cli\u003eOffers Increased workshop through put and energy savings\u003c\/li\u003e\n\u003cli\u003ereduces drying time by between 30 - 50%\u003c\/li\u003e\n\u003cli\u003eLiquid additive added to 2k hardeners for rapid through cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2555\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nLiquid additive for use with 2K Isocyanate hardeners to achieve rapid through cure, accelerates through curing of 2K primers, top coats, and clearcoats, signifiantly reducing stoving times\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ROC-S.pdf?v=1771551137\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339102663036,"sku":"ROC\/S","price":15.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ROC-S.jpg?v=1771551141"},{"product_id":"u-pol-s2030-1-fast-hardener","title":"Fast Hardener","description":"\u003cp\u003eThe Fast Hardener is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use U-pol reference S2030\/1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcitvates Paints, Primers, and Clearcoats\u003c\/li\u003e\n\u003cli\u003eWater clear\u003c\/li\u003e\n\u003cli\u003eFast Isocyanate Hardener\u003c\/li\u003e\n\u003cli\u003e1 lt tin\u003c\/li\u003e\n\u003cli\u003ePaint Acitivator\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e183\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nS2030\/1 is a 1lt High Quality Isocyanate hardener for 2K coatings","brand":"U-POL","offers":[{"title":"1","offer_id":56339102957948,"sku":"S2030\/1","price":20.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/S2030-1.jpg?v=1771552826"},{"product_id":"u-pol-sm-7-smooth-7-body-filler-3-litre","title":"U-Pol Smooth 7 Body Filler - 3 Litre","description":"\u003cul\u003e\n\u003cli\u003eCan be over-painted with most paint systems including 2K\u003c\/li\u003e\n\u003cli\u003ePinhole free finish\u003c\/li\u003e\n\u003cli\u003eGood adhesion\u003c\/li\u003e\n\u003cli\u003eVery Smooth spreading\u003c\/li\u003e\n\u003cli\u003ePolyester body filler specially formulated for the professional user for filling holes and imperfections on surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e171\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e171\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e5.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find Smooth 7 invaluable as a car body filler and repair paste.\u003cp\u003eThis tin of UPol Smooth 7 comes in a 3.5 litre tin and is a polyester body filler formulated for filling holes and imperfections in bodywork surfaces, leaving you with a pinhole free finish. Not only is it a great filler it provides a strong professional looking finish and is easy to sand making repairs easier. It is suitable for over painting and is also safe to use with 2K paint.\u003c\/p\u003e\u003cp\u003e UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003c\/p\u003e\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/SM-7.pdf?v=1771553996\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339104006524,"sku":"SM\/7","price":35.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/SM-7.jpg?v=1771554001"},{"product_id":"u-pol-smcb-2-smc-carbon-fibre-reinforced-filler-black-1-1l","title":"U-Pol SMC Carbon Fibre Reinforced Filler - 1.1 Litre","description":"\u003cp\u003eThe U-Pol SMC Carbon Fibre Reinforced Filler - 1.1 Litre is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use U-pol reference SMCB\/2 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to sand to a fine finish\u003c\/li\u003e\n\u003cli\u003eReinforced with carbon fibre for structural strength\u003c\/li\u003e\n\u003cli\u003eDesigned to repair cracks, holes and scratches in SMC, fiberglass, composite and other rigid materials\u003c\/li\u003e\n\u003cli\u003eHigh adhesion bonding paste and filling compound\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/SMCB-2.pdf?v=1771554001\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339104334204,"sku":"SMCB\/2","price":43.11,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/SMCB_2.jpg?v=1771554004"},{"product_id":"isopon-ultf-1-isopon-ultimate-filler-560ml","title":"Isopon Ultimate Filler 560ml","description":"\u003cp\u003eThe Isopon Ultimate Filler 560ml is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Isopon reference ULTF\/1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ecoverage 1225cm2 at 3.5mm depth\u003c\/li\u003e\n\u003cli\u003euniversal repairs\u003c\/li\u003e\n\u003cli\u003eexceptionally smooth and easy to sand\u003c\/li\u003e\n\u003cli\u003eadvanced resin technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.277\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"ISOPON","offers":[{"title":"1","offer_id":56339104989564,"sku":"ULTF\/1","price":16.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ULTF-1.jpg?v=1771561996"},{"product_id":"u-pol-upef-m-u-pol-extra-stopper-fine-finnishing-750ml","title":"750ML Tin","description":"\u003cp\u003eThe 750ML Tin is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 2 COMPONENT FINE FINISHING technical info and 1 minimum age. Use U-pol reference UPEF\/M when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e750ml\u003c\/li\u003e\n\u003cli\u003eFINE FINISHIN\u003c\/li\u003e\n\u003cli\u003eEXTRA STOPPER\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003e2 COMPONENT FINE FINISHING\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.625\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nQUICK SETTING POLYESTER FILLER FOR FINE REPAIRS","brand":"U-POL","offers":[{"title":"1","offer_id":56339105251708,"sku":"UPEF\/M","price":28.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPEF-M.jpg?v=1771562009"},{"product_id":"u-pol-upol-sf2-reface","title":"Reface - 2K Polyester Spray Filler Hardener","description":"\u003cp\u003eThe Reface - 2K Polyester Spray Filler Hardener is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use U-pol reference UPOL\/SF2 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Film Build\u003c\/li\u003e\n\u003cli\u003eEasy sand\u003c\/li\u003e\n\u003cli\u003ePolyester Spray Filler\u003c\/li\u003e\n\u003cli\u003e2.5lt tin\u003c\/li\u003e\n\u003cli\u003eSprayable Body Filler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e158\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e158\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHighly effective two componant Sprayable Polyester Filler developed to spray Large areas\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOL-SF2.pdf?v=1771562013\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339105415548,"sku":"UPOL\/SF2","price":67.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOL-SF2.jpg?v=1771562016"},{"product_id":"u-pol-upolb-2-upolb-glass-fibre-1lt","title":"Upolb Glass Fibre 1LT","description":"\u003cp\u003eThe Upolb Glass Fibre 1LT is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use U-pol reference UPOLB\/2 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ewater resistant when cured\u003c\/li\u003e\n\u003cli\u003eExcellent Gap filling Properties\u003c\/li\u003e\n\u003cli\u003eStrong Polyester glass Fibre Filler\u003c\/li\u003e\n\u003cli\u003e1lt tin\u003c\/li\u003e\n\u003cli\u003eFibreglass Bridging Compound\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e12.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nUPOLB\/2 is a strong Polyester glass fibre filler suitable for bridging holes in steel and GRP surfaces\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOLB-2.pdf?v=1771562016\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339105743228,"sku":"UPOLB\/2","price":30.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOLB-2.jpg?v=1771562020"},{"product_id":"u-pol-upolb-4-glass-fibre-bridging-compound-1-85l","title":"U-Pol Glass Fibre Bridging Compound - 1.85 Litre","description":"\u003cp\u003eThe U-Pol Glass Fibre Bridging Compound - 1.85 Litre is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use U-pol reference UPOLB\/4 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 1.85 litre tin\u003c\/li\u003e\n\u003cli\u003eIt is easily covered with standard polyester filler or can be over-painted directly\u003c\/li\u003e\n\u003cli\u003eForms a very hard durable surface and can be sanded and shaped if required\u003c\/li\u003e\n\u003cli\u003ePolyester glass fibre filler is a two component chemical paste used for the bridging of holes and rust in surfaces such as steel and GRP\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e158\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e158\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find U-Pol’s range of body fillers, repair pastes and Fastglas invaluable. This glass fibre bridging compound from U-Pol is a two component chemical paste used for the bridging of holes and rust in surfaces such as steel and GRP. It has been designed to form a very hard durable surface that can be sanded and shaped if required. It is easily covered with standard polyester filler or can be over-painted directly. Comes in a 1.85 litre tin. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOLB-4.pdf?v=1771562019\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339106103676,"sku":"UPOLB\/4","price":38.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOLB-4.jpg?v=1771562023"},{"product_id":"u-pol-upole-1-extra","title":"Extra - Smooth Body Filler","description":"\u003cp\u003eThe Extra - Smooth Body Filler is a vehicle-care or workshop preparation product that is formulated for the cleaning, preparation, protection or finishing task stated in its product data. Its catalogue specification records 1 minimum age. Use U-pol reference UPOLE\/1 when cross-checking the part. Check the pack size, surface and material suitability, application method, drying or curing requirements and safety instructions before use; test on an inconspicuous area where appropriate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003esmooth durable finish\u003c\/li\u003e\n\u003cli\u003eeasy to mix and use\u003c\/li\u003e\n\u003cli\u003ePolyester Body Filler\u003c\/li\u003e\n\u003cli\u003e600ml tin\u003c\/li\u003e\n\u003cli\u003eBody filler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.1823\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nUPOL\/E is a durable smooth easy application Polyester Body filler, Ideal for both small and Larger dents and Imperfections\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOLE-1.pdf?v=1771562023\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339106431356,"sku":"UPOLE\/1","price":17.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOLE-1.jpg?v=1771562028"},{"product_id":"u-pol-upole-2-upol-extra-polyester-filler-no-2-kit-1-1l","title":"U-Pol Extra Polyester Filler No.2 Kit 1.1 Litre","description":"\u003cp\u003eThe U-Pol Extra Polyester Filler No.2 Kit 1.1 Litre is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use U-pol reference UPOLE\/2 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for large area repairs, deep to medium repairs.\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to galvanised steel and aluminium.\u003c\/li\u003e\n\u003cli\u003eSmooth spreading.\u003c\/li\u003e\n\u003cli\u003eMedium weight polyester filler with excellent filling and shaping properties.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nUPOL EXTRA POLYESTER FILLER NO.2 KIT 1.1L","brand":"U-POL","offers":[{"title":"1","offer_id":56339106693500,"sku":"UPOLE\/2","price":24.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOLE2.jpg?v=1771562028"},{"product_id":"u-pol-upole-4-extra","title":"Extra - Smooth Body Filler","description":"\u003cp\u003eThe Extra - Smooth Body Filler is a vehicle-care or workshop preparation product that is formulated for the cleaning, preparation, protection or finishing task stated in its product data. Its catalogue specification records 1 minimum age. Use U-pol reference UPOLE\/4 when cross-checking the part. Check the pack size, surface and material suitability, application method, drying or curing requirements and safety instructions before use; test on an inconspicuous area where appropriate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003esmooth durable finish\u003c\/li\u003e\n\u003cli\u003eeasy to mix and use\u003c\/li\u003e\n\u003cli\u003ePolyester Body Filler\u003c\/li\u003e\n\u003cli\u003e2.1 lt tin\u003c\/li\u003e\n\u003cli\u003eBody filler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.3505\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nUPOL\/E is a durable smooth easy application Polyester Body filler, Ideal for both small and Larger dents and Imperfections\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOLE-4.pdf?v=1771562028\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"1","offer_id":56339106955644,"sku":"UPOLE\/4","price":31.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/UPOLE-4.jpg?v=1771562032"},{"product_id":"isopon-pm1-aluminium-mesh-25cm-x-20cm","title":"Isopon Aluminium Mesh - 25cm x 20cm","description":"\u003cp\u003eThe Isopon Aluminium Mesh - 25cm x 20cm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 25cm x 20cm size. Use Isopon reference PM1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSheet size is 25cm x 20cm\u003c\/li\u003e\n\u003cli\u003eUse together with body filler, bridging compound and glass fibre kit for a permanent repair\u003c\/li\u003e\n\u003cli\u003eIdeal for reinforcing holes and cracks in metals and plastics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e25cm x 20cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHowever well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these, as well as larger dents or accident damage, you will find U-Pol’s range of body fillers, repair pastes and Fastglas invaluable. This aluminium mesh from U-Pol is the ideal solution for reinforcing holes and cracks in metals and plastics. Used together with body filler or bridging compound, this will provide you with a permanent repair. Full instructions are included on the packaging. The sheet size is 25cm x 20cm. U-Pol is a world leader in automotive refinish products. Recognized globally with sales in over 100 countries, U-Pol is committed to consistently providing customers with products of the quality professionals’ demand. U-Pol’s heritage and experience of over 60 years in the industry, coupled with continued investment in state-of-the-art manufacturing facilities and reputation for innovation, ensures that your U-Pol experience is nothing less than world class.","brand":"ISOPON","offers":[{"title":"1","offer_id":56352054608252,"sku":"PM1","price":4.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PM1.jpg?v=1771548896"},{"product_id":"plastikit-re-1-plastikit-poly-resin-1l","title":"Plastikit Poly Resin - 1 Litre","description":"\u003cp\u003eThe Plastikit Poly Resin - 1 Litre is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use Plastikit reference RE\/1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eD\u003c\/li\u003e\n\u003cli\u003eHardening time varies according to ambient temperature: 30 mins @ 20C, 15-20 mins @ 25C\u003c\/li\u003e\n\u003cli\u003eThe surface must be clean, dry and free from all traces of grease\u003c\/li\u003e\n\u003cli\u003eFor construction and repairing car bodies, boats, general repairs and garden ponds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nIf you’ve had a problem with rust or damaged body work you may be considering fiberglass to carry out the repairs. This can be a quick an easy way to create a professional looking repair without costing a fortune, but with many different products on the market it may be difficult to decide which is the best one for the job. With the range of Plastkit fibre glass repair products from UPol you can be sure that you have chosen the right tool for the job. This Plastikit Poly resin is the ideal solution for a number of different industries. Examples include construction, car and boat repairs as well as other general needs. Comes in a 1 litre tin. UPol - A world leader in automotive refinish products. Recognised globally with sales in over 100 countries, UPol are committed to providing their customers with nothing but products of the highest quality. With over 60 years of manufacturing and marketing experience within the industry UPol have built a solid reputation not only for their company; but also for their brand portfolio; and pride themselves on being at forefront of innovation within the market.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RE-1_20UPol_20Plastikit_20Poly_20Resin_20MSDS.pdf?v=1771550823\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"PLASTIKIT","offers":[{"title":"1","offer_id":56352054870396,"sku":"RE\/1","price":32.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RE_1.jpg?v=1771550827"},{"product_id":"easy-3-smooth-spreading-glaze-1-1","title":"Easy 3 Smooth Spreading Glaze 1.1","description":"\u003cp\u003eThe Easy 3 Smooth Spreading Glaze 1.1 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 1 minimum age. Use U-pol reference EASY3\/1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for fine finishing\u003c\/li\u003e\n\u003cli\u003eeasy sand\u003c\/li\u003e\n\u003cli\u003eeasy to use finishing filler\u003c\/li\u003e\n\u003cli\u003e1.1Lt tin\u003c\/li\u003e\n\u003cli\u003eSmooth finishing filler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nEASY3\/1 is a easy to use ultra smooth finishing paste for skimming and fine finishing in thin layers prior to paint finishing\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/EASY3-1.pdf?v=1771538904\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"U-POL","offers":[{"title":"Default Title","offer_id":56386268692860,"sku":"EASY3\/1","price":39.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/EASY3-1.jpg?v=1771538909"},{"product_id":"p38-multi-purpose-body-filler-100-ml-tube","title":"P38 Multi-Purpose Body Filler 100 Ml Tube","description":"\u003cp\u003eThe P38 Multi-Purpose Body Filler 100 Ml Tube is a vehicle-care or workshop preparation product that is formulated for the cleaning, preparation, protection or finishing task stated in its product data. Its catalogue specification records 1 minimum age. Use U-pol reference P38\/100 when cross-checking the part. Check the pack size, surface and material suitability, application method, drying or curing requirements and safety instructions before use; test on an inconspicuous area where appropriate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eeasy to mix, easy to sand\u003c\/li\u003e\n\u003cli\u003e100ml pack\u003c\/li\u003e\n\u003cli\u003eMulti purpose Body Filler for use on minor dents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e226\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2441\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nP38 Multi Purpose Body Filler is a smooth textured filler for use on minor dents in most types of metal bodywork","brand":"U-POL","offers":[{"title":"Default Title","offer_id":56386506031484,"sku":"P38\/100","price":15.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/P38-100.jpg?v=1771547527"}],"url":"https:\/\/automotopart.co.uk\/collections\/body-fillers.oembed?page=2","provider":"AutoMotoPart","version":"1.0","type":"link"}