{"title":"Cutters \u0026 Shears","description":"\n\u003cp\u003eCutters and shears use opposed edges, leveraged jaws or compound pivots to separate wire, cable, sheet metal, hose, plastic ties and small fasteners. Choosing by appearance alone is unsafe: diagonal cutters, cable shears, aviation snips, bolt cutters and hose cutters use different edge geometry and are hardened for specific materials and maximum diameters.\u003c\/p\u003e\n\u003cp\u003eSelect by workpiece material, hardness and thickness, cut shape, access and required finish. Confirm rated capacity, overall leverage, jaw profile, left-, right- or straight-cut snip pattern, insulation or electrical rating and replaceable-blade availability. Consider where the retained side and offcut will move as the cut completes. A tool rated for soft copper cable can chip on spring wire; insulated handles do not prove live-working certification.\u003c\/p\u003e\n\u003cp\u003eInspect edges, pivot, handles, stops and return spring before every use. Reject cracked jaws, chips, spreading pivots, loose grips and damaged insulation. Clamp or restrain the work so the offcut cannot fly, and check both sides of a vehicle panel for wiring, fuel and brake lines, airbags, glass and loaded structures before cutting.\u003c\/p\u003e\n\u003cp\u003eWear eye protection and keep fingers outside the jaw path. Cut squarely within capacity using the handles only; do not add extension tubes, strike handles with a hammer or twist the tool to finish a cut. Hardened wire, cable under tension, pressurised hose, seat-belt webbing, springs and pyrotechnic restraint parts require purpose-designed procedures and often should not be cut at all.\u003c\/p\u003e\n\u003cp\u003eAfter cutting, deburr sharp edges, account for fragments and restore corrosion protection or insulation as the repair requires. Clean the tool, remove swarf from the pivot and lubricate only as instructed, keeping oil off electrical gripping surfaces and trim. Store edges closed or protected and dry. Stop if the jaws deflect, chip, bind or leave the work uncontrolled. Workshop cutters, shears and compatible replacement blades are listed below.\u003c\/p\u003e","products":[{"product_id":"milwaukee-4932499010-bulldog-aviation-snips","title":"Bulldog Aviation Snips","description":"\u003cp\u003eThe Bulldog Aviation Snips is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499010 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eCompound leverage action for easier cutting through thicker materials.\u003c\/li\u003e\n\u003cli\u003eOne hand locking mechanism for increased productivity on the jobsite.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003cli\u003eAviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmolded grips add comfort and last longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e327\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.423\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341073133948,"sku":"4932499010","price":29.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499010.jpg?v=1771524134"},{"product_id":"milwaukee-4932499013-left-cutting-offset-aviation-snips","title":"Left Cutting Offset Aviation Snips","description":"\u003cp\u003eThe Left Cutting Offset Aviation Snips is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499013 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eCompound leverage action for easier cutting through thicker materials.\u003c\/li\u003e\n\u003cli\u003eOne hand locking mechanism for increased productivity on the jobsite.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003cli\u003eOffset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmolded grips add comfort and last longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.463\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341073297788,"sku":"4932499013","price":33.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499013.jpg?v=1771524137"},{"product_id":"milwaukee-4932499014-right-cutting-aviation-snips","title":"Right Cutting Aviation Snips","description":"\u003cp\u003eThe Right Cutting Aviation Snips is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499014 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eCompound leverage action for easier cutting through thicker materials.\u003c\/li\u003e\n\u003cli\u003eOne hand locking mechanism for increased productivity on the jobsite.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003cli\u003eAviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmolded grips add comfort and last longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.433\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341073396092,"sku":"4932499014","price":28.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499014.jpg?v=1771524139"},{"product_id":"milwaukee-4932499016-right-cutting-offset-aviation-snips","title":"Right Cutting Offset Aviation Snips","description":"\u003cp\u003eThe Right Cutting Offset Aviation Snips is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499016 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eCompound leverage action for easier cutting through thicker materials.\u003c\/li\u003e\n\u003cli\u003eOne hand locking mechanism for increased productivity on the jobsite.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003cli\u003eOffset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmolded grips add comfort and last longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e329\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.469\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341073592700,"sku":"4932499016","price":34.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499016.jpg?v=1771524140"},{"product_id":"milwaukee-4932499018-straight-cutting-aviation-snips","title":"Straight Cutting Aviation Snips","description":"\u003cp\u003eThe Straight Cutting Aviation Snips is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499018 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eCompound leverage action for easier cutting through thicker materials.\u003c\/li\u003e\n\u003cli\u003eOne hand locking mechanism for increased productivity on the jobsite.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003cli\u003eAviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmolded grips add comfort and last longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.433\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341073756540,"sku":"4932499018","price":28.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499018.jpg?v=1771524142"},{"product_id":"milwaukee-4932499019-straight-cut-offset-aviation-snips","title":"Straight Cut Offset Aviation Snips","description":"\u003cp\u003eThe Straight Cut Offset Aviation Snips is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499019 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eCompound leverage action for easier cutting through thicker materials.\u003c\/li\u003e\n\u003cli\u003eOne hand locking mechanism for increased productivity on the jobsite.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003cli\u003eOffset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmolded grips add comfort and last longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e329\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.477\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341073985916,"sku":"4932499019","price":34.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499019.jpg?v=1771524144"},{"product_id":"milwaukee-4932499021-long-cut-straight-aviation-snips","title":"Long Cut Straight Aviation Snips","description":"\u003cp\u003eThe Long Cut Straight Aviation Snips is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499021 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eLONG CUT STRAIGHT AVIATION SNIPS\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e326\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.496\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341074149756,"sku":"4932499021","price":36.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499021.jpg?v=1771524144"},{"product_id":"milwaukee-4932499022-long-cut-offset-left-aviation-snips","title":"Long Cut Offset Left Aviation Snips","description":"\u003cp\u003eThe Long Cut Offset Left Aviation Snips is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499022 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eCompound leverage action for easier cutting through thicker materials.\u003c\/li\u003e\n\u003cli\u003eOne hand locking mechanism for increased productivity on the jobsite.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003cli\u003eExtra long aviation snips: For longer and straighter cuts in one go.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmolded grips add comfort and last longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e326\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.513\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341074280828,"sku":"4932499022","price":44.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499022.jpg?v=1771524146"},{"product_id":"milwaukee-48224510-metal-snips-left-cut-1pc","title":"Metal snips left","description":"\u003cp\u003eThe Metal snips left is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 1 minimum age. Use Milwaukee reference 48224510 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne hand locking mechanism.\u003c\/li\u003e\n\u003cli\u003eMade from forged alloy steel for best durability – Cr Steel.\u003c\/li\u003e\n\u003cli\u003eLess hand fatigue when cutting thicker materials. Design with compound leverage action.\u003c\/li\u003e\n\u003cli\u003eAviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmoulded grips add comfort and last longer.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eExtra long aviation snips: For longer and straighter cuts in one go.\u003c\/li\u003e\n\u003cli\u003eOffset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.\u003c\/li\u003e\n\u003cli\u003eChrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.\u003c\/li\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e299\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nLeft aviation snips","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341719056764,"sku":"48224510","price":34.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48224510.jpg?v=1771523026"},{"product_id":"milwaukee-48224520-metal-snips-right-cut-1pc","title":"Metal snips right","description":"\u003cp\u003eThe Metal snips right is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 1 minimum age. Use Milwaukee reference 48224520 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne hand locking mechanism.\u003c\/li\u003e\n\u003cli\u003eMade from forged alloy steel for best durability – Cr Steel.\u003c\/li\u003e\n\u003cli\u003eLess hand fatigue when cutting thicker materials. Design with compound leverage action.\u003c\/li\u003e\n\u003cli\u003eAviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmoulded grips add comfort and last longer.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eExtra long aviation snips: For longer and straighter cuts in one go.\u003c\/li\u003e\n\u003cli\u003eOffset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.\u003c\/li\u003e\n\u003cli\u003eChrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.\u003c\/li\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e299\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nRight aviation snips","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341719253372,"sku":"48224520","price":34.31,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48224520.jpg?v=1771523027"},{"product_id":"milwaukee-48224533-metal-snips-lh-rh-and-straight-cut","title":"Metal Snips Set (3pc)","description":"\u003cp\u003eThe Metal Snips Set (3pc) is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 1 minimum age. Use Milwaukee reference 48224533 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eLess hand fatigue when cutting thicker materials. Design with compound leverage action.\u003c\/li\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eThumb and four finger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eAviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmoulded grips add comfort and last longer.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003cli\u003eOne hand locking mechanism.\u003c\/li\u003e\n\u003cli\u003eMade from forged alloy steel for best durability – Cr Steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e267\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e299\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nMetal Snips Set (3pc)","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341719318908,"sku":"48224533","price":41.71,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48224533.jpg?v=1771523031"},{"product_id":"milwaukee-4932499024-mini-flush-cutters","title":"Mini Flush Cutters","description":"\u003cp\u003eThe Mini Flush Cutters is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499024 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAngled head design for better access to tight spaces.\u003c\/li\u003e\n\u003cli\u003eInduction hardened cutting edges for consistent, precise cuts through thin wires and cable ties.\u003c\/li\u003e\n\u003cli\u003eSpring loaded handle for maximum efficiency and to reduce hand fatigue while using the tool.\u003c\/li\u003e\n\u003cli\u003eRust protection increases tool life by reducing corrosion.\u003c\/li\u003e\n\u003cli\u003eErgonomic handle designed with comfort grips that will not peel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.083\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341728887164,"sku":"4932499024","price":26.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499024.jpg?v=1771524147"},{"product_id":"milwaukee-4933447935-m18-2-0mm-brushed-metal-shears-bar","title":"M18 Metal Shear Bare Unit","description":"\u003cp\u003eThe M18 Metal Shear Bare Unit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4933447935 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible battery system: works with all MILWAUKEE M18 batteries\u003c\/li\u003e\n\u003cli\u003eREDLINK overload protection electronics in tool and battery pack deliver best in class system durability\u003c\/li\u003e\n\u003cli\u003eVariable speed trigger for extra control during cutting\u003c\/li\u003e\n\u003cli\u003eIn-Line wrist design for increased control during cutting\u003c\/li\u003e\n\u003cli\u003eREDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life\u003c\/li\u003e\n\u003cli\u003eBelt clip for secure mobility\u003c\/li\u003e\n\u003cli\u003eIndividual battery cell monitoring optimises tool run time and ensures long term pack durability\u003c\/li\u003e\n\u003cli\u003eAccurate cuts with maximum cutting depth of 2.0 mm in steel\u003c\/li\u003e\n\u003cli\u003eUnique 360dgtool-free rotating head with 12 locking positions to access tight spaces and increasing user comfort\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.259\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nM18 BMS20-0 M18 metal shear","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341949284732,"sku":"4933447935","price":269.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4933447935.jpg?v=1771524190"},{"product_id":"metal-snips-right-offset","title":"Metal snips right offset","description":"\u003cp\u003eThe Metal snips right offset is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 1 minimum age. Use Milwaukee reference 48224522 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne hand locking mechanism.\u003c\/li\u003e\n\u003cli\u003eMade from forged alloy steel for best durability – Cr Steel.\u003c\/li\u003e\n\u003cli\u003eLess hand fatigue when cutting thicker materials. Design with compound leverage action.\u003c\/li\u003e\n\u003cli\u003eAviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmoulded grips add comfort and last longer.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eExtra long aviation snips: For longer and straighter cuts in one go.\u003c\/li\u003e\n\u003cli\u003eOffset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.\u003c\/li\u003e\n\u003cli\u003eChrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.\u003c\/li\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e289\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.425\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nRight offset snips","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385751810428,"sku":"48224522","price":37.32,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48224522.jpg?v=1771523029"},{"product_id":"plastic-cutter","title":"Plastic Cutter","description":"\u003cp\u003eThe Plastic Cutter is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932479407 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eV-shaped blade allows quick and straight cuts; prevents crushing of material.\u003c\/li\u003e\n\u003cli\u003eRobust construction: Metal core from the head to the handles for maximum lifetime.\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant head.\u003c\/li\u003e\n\u003cli\u003eCuts PEX PB MDP PE plastic electrical conduits pneumatic pipe plastic overflow pipe rubber hoses silicon hoses up to 25 mm.\u003c\/li\u003e\n\u003cli\u003eOne handed locking mechanism tool remains closed while in pouch spring loaded but easy opening.\u003c\/li\u003e\n\u003cli\u003eReplaceable stainless steel blade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e294\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.265\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nPlastic Cutter","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385757577596,"sku":"4932479407","price":30.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932479407.jpg?v=1771523405"},{"product_id":"offset-scissors","title":"Offset scissors","description":"\u003cp\u003eThe Offset scissors is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 1 minimum age. Use Milwaukee reference 4932479410 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser edged ruler markings on the blade allows to measure and cut in one go.\u003c\/li\u003e\n\u003cli\u003eIndex finger groove for more comfort.\u003c\/li\u003e\n\u003cli\u003eJobsite offset scissors with 60°-offset head allows to keep hand above cutting material.\u003c\/li\u003e\n\u003cli\u003eBolt lock technology protects blades from loosening to ensure precise cutting.\u003c\/li\u003e\n\u003cli\u003eAll metal core: Full metal handle construction to protect from drops and handle breakage.\u003c\/li\u003e\n\u003cli\u003eIron carbide cutting edge for maximum durability. Longer lifetime vs. stainless steel.\u003c\/li\u003e\n\u003cli\u003eLarge handle loops for use with gloves.\u003c\/li\u003e\n\u003cli\u003eChrome plated blades for maximum rust protection.\u003c\/li\u003e\n\u003cli\u003eJobsite offset scissors with micro-serrated blades for maximum durability and better grip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.252\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nOffset scissors","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385757610364,"sku":"4932479410","price":17.62,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932479410.jpg?v=1771523407"},{"product_id":"left-cutting-aviation-snips","title":"Left Cutting Aviation Snips","description":"\u003cp\u003eThe Left Cutting Aviation Snips is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932499011 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSerrated cutting edges prevent slippage when cutting.\u003c\/li\u003e\n\u003cli\u003eThumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.\u003c\/li\u003e\n\u003cli\u003eTorsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.\u003c\/li\u003e\n\u003cli\u003eCompound leverage action for easier cutting through thicker materials.\u003c\/li\u003e\n\u003cli\u003eOne hand locking mechanism for increased productivity on the jobsite.\u003c\/li\u003e\n\u003cli\u003eFlush slimline design for non-snagging in material.\u003c\/li\u003e\n\u003cli\u003eAviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.\u003c\/li\u003e\n\u003cli\u003eTriple cutting direction identification – on the head, handle and by colour coded handle.\u003c\/li\u003e\n\u003cli\u003eErgonomic and durable overmolded grips add comfort and last longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e326\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.432\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385769079164,"sku":"4932499011","price":28.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932499011.jpg?v=1771524135"}],"url":"https:\/\/automotopart.co.uk\/collections\/cutters-shears.oembed?page=2","provider":"AutoMotoPart","version":"1.0","type":"link"}