{"title":"Cutting Discs","description":"\n\u003cp\u003eCutting discs remove a narrow kerf through metal, masonry, tile and other approved materials using a compatible grinder or cut-off machine. Listings may also include thicker grinding wheels or specialist diamond and carbide discs; these are different tools, not interchangeable shapes. Select the disc for the machine, work material and operation, then confirm diameter, bore, thickness, maximum rotational speed, guard type, flange arrangement and any direction marking.\u003c\/p\u003e\n\u003cp\u003eThe machine's no-load speed must never exceed the disc's marked maximum rpm, even when diameters and bores fit. Use only manufacturer-approved reducing rings or mounting parts where expressly permitted. A thin bonded cut-off wheel is designed for radial cutting and must not be twisted, used for side grinding or forced into a closing cut. Grinding wheels need their own approved machine and guard configuration; diamond products require the specified material, rotation direction and wet\/dry method.\u003c\/p\u003e\n\u003cp\u003eInspect every disc before mounting. Reject cracks, chips, distortion, water or chemical damage, missing labels and products beyond any marked storage\/use limit. Isolate the tool, clean the spindle and flanges, mount without improvised washers, and refit the correct guard and side handle. Run the machine in a protected position before approaching the work. Anyone mounting or using abrasive wheels at work needs suitable information, instruction and competence under the workplace risk controls.\u003c\/p\u003e\n\u003cp\u003eSecure the workpiece, plan where the offcut will move and keep the cut from pinching the disc. Hold the tool with both hands, stay out of the wheel plane, bring it to speed before contact and let the abrasive cut without excessive pressure. Sparks can ignite fuel vapour, batteries, trim, insulation and dust; remove combustibles and use appropriate hot-work controls. Never cut or grind a vehicle wheel while any tyre remains fitted because heating can trigger a violent tyre failure.\u003c\/p\u003e\n\u003cp\u003eControl dust at source using a compatible extraction or wet method, and select eye, face, hearing, respiratory and other protection from the risk assessment. A guard and extraction are not replaced by PPE. Stop for rising vibration, slowing, glazing, unusual noise or damage. Let the disc stop naturally before putting the tool down, disconnect it before adjustments and store discs dry, flat and protected from impact, heat and contamination.\u003c\/p\u003e","products":[{"product_id":"flexovit-66252920430-standard-cutting-discs-115mm-flat","title":"Cutting Disc - Flat - 115mm x 2.0mm","description":"\u003cp\u003eThe Cutting Disc - Flat - 115mm x 2.0mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Wheel Size (diameter x thickness): 115 x 2.0mm. Bore Size: 22.23mm technical info. Use Flexovit reference 66252920430 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wheel is composed of iron and sulphur\u003c\/li\u003e\n\u003cli\u003eStraight clean cutting\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWheel Size (diameter x thickness): 115 x 2.0mm. Bore Size: 22.23mm\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a cutting wheel in a number of different industries. The wheel is composed of iron, sulphur and designed for various cutting and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular cutting wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 115mm in diameter and 2mm thick. It is very efficient with a thin structure for extremely accurate cutting. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"1","offer_id":56338935611772,"sku":"66252920430","price":6.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920430.jpg?v=1771526636"},{"product_id":"flexovit-66252920433-standard-cutting-discs-115mm-dep-centre","title":"Cutting Disc - Depressed Centre - 115mm x 2.5mm","description":"\u003cp\u003eThe Cutting Disc - Depressed Centre - 115mm x 2.5mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Wheel Size (diameter x thickness): 115 x 2.5mm. Bore Size: 22.23mm technical info. Use Flexovit reference 66252920433 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDepressed centre\u003c\/li\u003e\n\u003cli\u003eStraight clean cutting\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWheel Size (diameter x thickness): 115 x 2.5mm. Bore Size: 22.23mm\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a cutting wheel in a number of different industries. The wheel is composed of iron, sulphur and designed for various cutting and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular cutting wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 115mm in diameter and 2.5mm thick. It is very efficient with a thin structure for extremely accurate cutting. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"1","offer_id":56338936234364,"sku":"66252920433","price":6.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920433.jpg?v=1771526639"},{"product_id":"flexovit-66252920434-standard-cutting-discs-125mm-dep-centre","title":"Cutting Disc - Depressed Centre - 125mm x 2.5mm","description":"\u003cp\u003eThe Cutting Disc - Depressed Centre - 125mm x 2.5mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Wheel Size (diameter x thickness): 125 x 2.5mm. Bore Size: 22.23mm technical info. Use Flexovit reference 66252920434 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDepressed centre\u003c\/li\u003e\n\u003cli\u003eStraight clean cutting\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWheel Size (diameter x thickness): 125 x 2.5mm. Bore Size: 22.23mm\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a cutting wheel in a number of different industries. The wheel is composed of iron, sulphur and designed for various cutting and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular cutting wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 125mm in diameter and 2.5mm thick. It is very efficient with a thin structure for extremely accurate cutting. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"1","offer_id":56338936660348,"sku":"66252920434","price":7.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920434.jpg?v=1771526641"},{"product_id":"flexovit-66252920437-standard-cutting-discs-230mm-dep-centre","title":"Cutting Disc - Depressed Centre - 230mm x 3.2mm","description":"\u003cp\u003eThe Cutting Disc - Depressed Centre - 230mm x 3.2mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Flexovit reference 66252920437 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDepressed centre\u003c\/li\u003e\n\u003cli\u003eStraight clean cutting\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.425\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a cutting wheel in a number of different industries. The wheel is composed of iron, sulphur and designed for various cutting and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular cutting wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 230mm in diameter and 3.2mm thick. It is very efficient with a thin structure for extremely accurate cutting. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"1","offer_id":56338937184636,"sku":"66252920437","price":10.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920437.jpg?v=1771526642"},{"product_id":"flexovit-66252920441-standard-cutting-discs-230mm-flat","title":"Cutting Disc - Flat - 230mm x 3.2mm","description":"\u003cp\u003eThe Cutting Disc - Flat - 230mm x 3.2mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Flexovit reference 66252920441 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wheel is composed of iron and sulphur\u003c\/li\u003e\n\u003cli\u003eStraight clean cutting\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.075\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a cutting wheel in a number of different industries. The wheel is composed of iron, sulphur and designed for various cutting and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular cutting wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 230mm in diameter and 3.2mm thick. It is very efficient with a thin structure for extremely accurate cutting. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"1","offer_id":56338937807228,"sku":"66252920441","price":9.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920441.jpg?v=1771526643"},{"product_id":"flexovit-66252920448-standard-grinding-discs-125mm","title":"Grinding Disc - Depressed Centre -125mm x 6.5mm","description":"\u003cp\u003eThe Grinding Disc - Depressed Centre -125mm x 6.5mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Wheel Size (diameter x thickness): 125 x 6.5mm. Bore Size: 22.23mm technical info. Use Flexovit reference 66252920448 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContoured abrasive surface\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003cli\u003eEfficient. Fast stock removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWheel Size (diameter x thickness): 125 x 6.5mm. Bore Size: 22.23mm\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a grinding wheel in a number of different industries. The wheel is composed of an abrasive compound designed for various grinding and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular grinding wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 125mm in diameter and 6.5mm thick. It is very efficient at stock removal whilst being comfortable and easy to use. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"1","offer_id":56338938528124,"sku":"66252920448","price":8.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920448.jpg?v=1771526647"},{"product_id":"flexovit-66252920451-standard-grinding-discs-230mm","title":"Grinding Disc - Depressed Centre -230mm x 6.5mm","description":"\u003cp\u003eThe Grinding Disc - Depressed Centre -230mm x 6.5mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Wheel Size (diameter x thickness): 230 x 6.5mm. Bore Size: 22.23mm technical info. Use Flexovit reference 66252920451 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContoured abrasive surface\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003cli\u003eEfficient. Fast stock removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWheel Size (diameter x thickness): 230 x 6.5mm. Bore Size: 22.23mm\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a grinding wheel in a number of different industries. The wheel is composed of an abrasive compound designed for various grinding and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular grinding wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 230mm in diameter and 6.5mm thick. It is very efficient at stock removal whilst being comfortable and easy to use. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"1","offer_id":56338939150716,"sku":"66252920451","price":13.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920451.jpg?v=1771526648"},{"product_id":"flexovit-66252926776-multipurpose-cutting-disc-125mm","title":"Cutting Disc - 125mm x 1.0mm","description":"\u003cp\u003eThe Cutting Disc - 125mm x 1.0mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Wheel Size (diameter x thickness): 125 x 1.0mm. Bore Size: 22.23mm technical info. Use Flexovit reference 66252926776 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCool precise cutting\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003cli\u003eCuts all materials; Steel, PVC, Stone, INOX and Tiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWheel Size (diameter x thickness): 125 x 1.0mm. Bore Size: 22.23mm\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e134\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.703\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a cutting wheel in a number of different industries. The wheel is composed of iron, sulphur and designed for various cutting and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular cutting wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 125mm in diameter and 1mm thick. It is very efficient with a thin structure for extremely accurate cutting. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"1","offer_id":56338939904380,"sku":"66252926776","price":7.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252926776.jpg?v=1771526651"},{"product_id":"weldfast-wld00181-4-5in-x-1-4in-metal-grinding-disc","title":"Metal Grinding Disc - 4.5in. x 0.25in.","description":"\u003cp\u003eThe Metal Grinding Disc - 4.5in. x 0.25in. is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Weldfast reference WLD00181 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh cutting speed\u003c\/li\u003e\n\u003cli\u003eHigh stock removal\u003c\/li\u003e\n\u003cli\u003e4.5in. (115mm) grinding disc for metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.143\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"WELDFAST","offers":[{"title":"1","offer_id":56338940658044,"sku":"WLD00181","price":4.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WLD00181.jpg?v=1771563157"},{"product_id":"weldfast-wld00182-4-5in-x-1-0mm-thin-metal-cutting-disc","title":"Thin Metal Cutting Disc - 4.5in. x 1.0mm","description":"\u003cp\u003eThe Thin Metal Cutting Disc - 4.5in. x 1.0mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Weldfast reference WLD00182 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtra durability\u003c\/li\u003e\n\u003cli\u003eHigh cutting speed\u003c\/li\u003e\n\u003cli\u003e4.5in. (115mm) cutting disc for metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"WELDFAST","offers":[{"title":"1","offer_id":56338941641084,"sku":"WLD00182","price":5.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WLD00182.jpg?v=1771563159"},{"product_id":"milwaukee-4932451499-stone-cutting-disc-pro-cc42-115m","title":"Stone Cut.W Pro+ CC42 115x3mm-1pc","description":"\u003cp\u003eThe Stone Cut.W Pro+ CC42 115x3mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932451499 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eApplications: for concrete masonry products and thin natural stone tiles.\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.068\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nStone Cut.W Pro+ CC42 115x3mm-1pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341052195196,"sku":"4932451499","price":4.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932451499.jpg?v=1771523116"},{"product_id":"milwaukee-4932451500-stone-cutting-disc-pro-cc42-230m","title":"Stone Cut.W Pro+ CC42 230x3mm-1pc","description":"\u003cp\u003eThe Stone Cut.W Pro+ CC42 230x3mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932451500 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eApplications: for concrete masonry products and thin natural stone tiles.\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.239\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nStone Cut.W Pro+ CC42 230x3mm-1pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341052752252,"sku":"4932451500","price":8.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932451500.jpg?v=1771523118"},{"product_id":"milwaukee-4932464717-thin-metal-cutting-disc-pro-scs41","title":"Cut.W Pro+ SCS41 76x1mm-5pc","description":"\u003cp\u003eThe Cut.W Pro+ SCS41 76x1mm-5pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932464717 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.064\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nCut.W Pro+ SCS41 76x1mm-5pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341057470844,"sku":"4932464717","price":12.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932464717.jpg?v=1771523144"},{"product_id":"milwaukee-4932478997-cut-w-pro-scs41-115x1-0mm-metalbox","title":"Cut.W Pro+ SCS41 115x1.0mm MetalBox-10pc","description":"\u003cp\u003eThe Cut.W Pro+ SCS41 115x1.0mm MetalBox-10pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932478997 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e*Orders are only possible in master carton (with 50 x 4932430445). Minimum order quantity is 50 x 4932430445 (=1 master carton). Order quantities greater than 50 pcs are to be ordered in multiples of 50 pcs (ie. 100 150 200...).\u003c\/li\u003e\n\u003cli\u003eApplications: Iron and sulphur free top line thin cut-off wheels for all steels. Best suitable for stainless (except the 350 x 4 mm) and acid-resistant steel hardox heat-resistant cast steel spring steel mild and tool steel.\u003c\/li\u003e\n\u003cli\u003eCharacteristics: 50% less cutting time and 50% less dust than standard 3 mm thick discs. Lower material loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.333\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nCut.W Pro+ SCS41 115x1.0mm MetalBox-10pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341062222204,"sku":"4932478997","price":15.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932478997.jpg?v=1771523390"},{"product_id":"milwaukee-4932498201-1pc-cutting-disc-125x0-8mm","title":"1Pc Thin Metal Cutting Disc Pro+ SCS42 125x0.8mm","description":"\u003cp\u003eThe 1Pc Thin Metal Cutting Disc Pro+ SCS42 125x0.8mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932498201 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e*Orders are only possible in master carton (with 50 x 4932498201). Minimum order quantity is 50 x 4932498201 (=1 master carton). Order quantities greater than 50 pcs are to be ordered in multiples of 50 pcs (ie. 100, 150, 200...).\u003c\/li\u003e\n\u003cli\u003eCharacteristics: Pro+ technology for best lifetime: Hydro-protected against moisture for longer lasting power. Greater performance and longer runtime than the 1 mm pro+ and therefore cordless optimised. Lower material loss, less sparks. Made in Germany.\u003c\/li\u003e\n\u003cli\u003eMost suitable for stainless and acid-resistant steel, hardox, heat-resistant cast steel, spring steel, mild and tool steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThin Metal Cutting Disc Pro+ SCS42 125x0.8mm-1pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56342167257468,"sku":"4932498201","price":5.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932498201.jpg?v=1771524098"},{"product_id":"grinding-discs-depressed-centre-100mm-x-6-4mm-box-qty-25","title":"Grinding Discs - Depressed Centre -100mm x 6.4mm - Box Qty 25","description":"\u003cp\u003eThe Grinding Discs - Depressed Centre -100mm x 6.4mm - Box Qty 25 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records M16 x 1,5 internal thread size, M14 x 1,5 external thread size, steel construction, and front axle left fitting position. Use Abracs reference 32193 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContoured abrasive surface\u003c\/li\u003e\n\u003cli\u003eBonded Grinding Discs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e182\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.699\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003epaired article number\u003c\/th\u003e\n\u003ctd\u003e32192\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength [mm]\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInternal Thread Size\u003c\/th\u003e\n\u003ctd\u003eM16 x 1,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal Thread Size\u003c\/th\u003e\n\u003ctd\u003eM14 x 1,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting Position\u003c\/th\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplementary Article\/Supplementary Info\u003c\/th\u003e\n\u003ctd\u003ewith lock nut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOEM Numbers\u003c\/th\u003e\n\u003ctd\u003e16 109 397 80, 16 109 764 80, 3817.77, 1376346080, 77364253, 77366547, 77367687, 03817 77, 3817 77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/459cf0da43f498f554cb292809368d1fc4bcb43a_3ad2db13-9e90-4ddc-a6f1-fff9daa8024e.pdf?v=1771520835\" target=\"_blank\"\u003eTecDoc Article Picture\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"ABRACS","offers":[{"title":"Default Title","offer_id":56385733525884,"sku":"32193","price":44.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/32193.jpg?v=1771522111"},{"product_id":"cut-w-pro-scs41-115x1mm-1pc","title":"Cut.W Pro+ SCS41 115x1mm-1pc","description":"\u003cp\u003eThe Cut.W Pro+ SCS41 115x1mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932451484 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e*Orders are only possible in master carton (with 50 x 4932430445). Minimum order quantity is 50 x 4932430445 (=1 master carton). Order quantities greater than 50 pcs are to be ordered in multiples of 50 pcs (ie. 100 150 200...).\u003c\/li\u003e\n\u003cli\u003eApplications: Iron and sulphur free top line thin cut-off wheels for all steels. Best suitable for stainless (except the 350 x 4 mm) and acid-resistant steel hardox heat-resistant cast steel spring steel mild and tool steel.\u003c\/li\u003e\n\u003cli\u003eCharacteristics: 50% less cutting time and 50% less dust than standard 3 mm thick discs. Lower material loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nCut.W Pro+ SCS41 115x1mm-1pc","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385752826236,"sku":"4932451484","price":4.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932451484.jpg?v=1771523113"},{"product_id":"cut-w-pro-scs41-125x1mm-1pc","title":"Cut.W Pro+ SCS41 125x1mm-1pc","description":"\u003cp\u003eThe Cut.W Pro+ SCS41 125x1mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932451487 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e*Orders are only possible in master carton (with 50 x 4932430445). Minimum order quantity is 50 x 4932430445 (=1 master carton). Order quantities greater than 50 pcs are to be ordered in multiples of 50 pcs (ie. 100 150 200...).\u003c\/li\u003e\n\u003cli\u003eApplications: Iron and sulphur free top line thin cut-off wheels for all steels. Best suitable for stainless (except the 350 x 4 mm) and acid-resistant steel hardox heat-resistant cast steel spring steel mild and tool steel.\u003c\/li\u003e\n\u003cli\u003eCharacteristics: 50% less cutting time and 50% less dust than standard 3 mm thick discs. Lower material loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.032\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nCut.W Pro+ SCS41 125x1mm-1pc","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385752859004,"sku":"4932451487","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932451487.jpg?v=1771523114"},{"product_id":"grind-w-pro-sg27-115x6mm-1pc","title":"Grind.W Pro+ SG27 115x6mm-1pc","description":"\u003cp\u003eThe Grind.W Pro+ SG27 115x6mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932451501 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplications: Sound performance in mild steel and non alloy tool steel.\u003c\/li\u003e\n\u003cli\u003eCharacteristics: Provides good lifetime and efficient grinding characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.141\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nGrind.W Pro+ SG27 115x6mm-1pc","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385752924540,"sku":"4932451501","price":7.17,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932451501.jpg?v=1771523119"},{"product_id":"grind-w-pro-sg27-125x6mm-1pc","title":"Grind.W Pro+ SG27 125x6mm-1pc","description":"\u003cp\u003eThe Grind.W Pro+ SG27 125x6mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932451502 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplications: Sound performance in mild steel and non alloy tool steel.\u003c\/li\u003e\n\u003cli\u003eCharacteristics: Provides good lifetime and efficient grinding characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.169\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nGrind.W Pro+ SG27 125x6mm-1pc","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385752957308,"sku":"4932451502","price":5.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932451502.jpg?v=1771523121"},{"product_id":"carbide-disc-cb-76mm-1pc","title":"Carbide Disc CB 76mm-1pc","description":"\u003cp\u003eThe Carbide Disc CB 76mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932464716 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbide blade suitable for cutting wood plastic and plasterboard.\u003c\/li\u003e\n\u003cli\u003eCutting depth remains the same over the lifetime of the disc.\u003c\/li\u003e\n\u003cli\u003eSuitable for use with angle grinders.\u003c\/li\u003e\n\u003cli\u003eSuitable for cutting all types of softer materials.\u003c\/li\u003e\n\u003cli\u003eNo risk of disc breakages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.055\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nCarbide Disc CB 76mm-1pc","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385753252220,"sku":"4932464716","price":13.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932464716.jpg?v=1771523143"},{"product_id":"dia-disc-dhmm-76mm-1pc","title":"Dia. Disc DHMM 76mm-1pc","description":"\u003cp\u003eThe Dia. Disc DHMM 76mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932471333 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA brazed diamond disc designed for a wide range of applications.\u003c\/li\u003e\n\u003cli\u003eSuitable for a vast variety of material like PVC granite tiles hard artificial stone composite material drywall thin wood threaded rods and sheet metal.\u003c\/li\u003e\n\u003cli\u003eOutstanding cutting performance due to extremely high diamond concentration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.042\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nDia. Disc DHMM 76mm-1pc","brand":"MILWAUKEE","offers":[{"title":"Default Title","offer_id":56385753448828,"sku":"4932471333","price":30.62,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932471333.jpg?v=1771523162"},{"product_id":"cutting-disc-extra-thin-115mm-x-1-0mm","title":"Cutting Disc - Extra Thin - 115mm x 1.0mm","description":"\u003cp\u003eThe Cutting Disc - Extra Thin - 115mm x 1.0mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Flexovit reference 66252920421 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWheel Size (diameter x thickness): 115 x 1.0mm. Bore Size: 22.23mm\u003c\/li\u003e\n\u003cli\u003eFree from iron, sulphur and chlorine\u003c\/li\u003e\n\u003cli\u003eThin accurate cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.748\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a cutting wheel in a number of different industries. The wheel is composed of iron, sulphur and designed for various cutting and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular cutting wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 115mm in diameter and 1mm thick. It is very efficient with a thin structure for extremely accurate cutting. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"Default Title","offer_id":56385907032444,"sku":"66252920421","price":6.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920421.jpg?v=1771526634"},{"product_id":"cutting-disc-flat-125mm-x-2-0mm","title":"Cutting Disc - Flat - 125mm x 2.0mm","description":"\u003cp\u003eThe Cutting Disc - Flat - 125mm x 2.0mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Wheel Size (diameter x thickness): 125 x 2.0mm. Bore Size: 22.23mm technical info. Use Flexovit reference 66252920431 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wheel is composed of iron and sulphur\u003c\/li\u003e\n\u003cli\u003eStraight clean cutting\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWheel Size (diameter x thickness): 125 x 2.0mm. Bore Size: 22.23mm\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a cutting wheel in a number of different industries. The wheel is composed of iron, sulphur and designed for various cutting and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular cutting wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 125mm in diameter and 2mm thick. It is very efficient with a thin structure for extremely accurate cutting. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"Default Title","offer_id":56385907065212,"sku":"66252920431","price":6.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920431.jpg?v=1771526639"},{"product_id":"grinding-disc-depressed-centre-115mm-x-6-5mm","title":"Grinding Disc -Depressed Centre - 115mm x 6.5mm","description":"\u003cp\u003eThe Grinding Disc -Depressed Centre - 115mm x 6.5mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Wheel Size (diameter x thickness): 115 x 6.5mm. Bore Size: 22.23mm technical info. Use Flexovit reference 66252920447 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContoured abrasive surface\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003cli\u003eEfficient. Fast stock removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWheel Size (diameter x thickness): 115 x 6.5mm. Bore Size: 22.23mm\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.158\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a grinding wheel in a number of different industries. The wheel is composed of an abrasive compound designed for various grinding and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular grinding wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 115mm in diameter and 6.5mm thick. It is very efficient at stock removal whilst being comfortable and easy to use. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"Default Title","offer_id":56385907097980,"sku":"66252920447","price":8.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252920447.jpg?v=1771526645"},{"product_id":"cutting-disc-115mm-x-1-0mm","title":"Cutting Disc - 115mm x 1.0mm","description":"\u003cp\u003eThe Cutting Disc - 115mm x 1.0mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records Wheel Size (diameter x thickness): 115 x 1.0mm. Bore Size: 22.23mm technical info. Use Flexovit reference 66252926775 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCool precise cutting\u003c\/li\u003e\n\u003cli\u003eComfortable and easy to use\u003c\/li\u003e\n\u003cli\u003eCuts all materials; Steel, PVC, Stone, INOX and Tiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWheel Size (diameter x thickness): 115 x 1.0mm. Bore Size: 22.23mm\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThere are many applications for a cutting wheel in a number of different industries. The wheel is composed of iron, sulphur and designed for various cutting and machining operations. Typical industries include automotive, construction and metal work to name a few. This particular cutting wheel from Saint Gobain is a standard disc designed for multiple uses. The size of the wheel is 115mm in diameter and 1mm thick. It is very efficient with a thin structure for extremely accurate cutting. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.","brand":"FLEXOVIT","offers":[{"title":"Default Title","offer_id":56385907130748,"sku":"66252926775","price":7.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/66252926775.jpg?v=1771526650"},{"product_id":"abracs-phoenix-extra-thin-flat-cutting-disc-230-x-1-8-x-22mm","title":"ABRACS Phoenix Extra Thin Flat Cutting Disc 230 x 1.8 x 22mm","description":"\u003cp\u003eThe ABRACS Phoenix Extra Thin Flat Cutting Disc 230 x 1.8 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WCD170 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eMax RPM 6,600 80m\/s\u003c\/li\u003e\n\u003cli\u003eO.D. x Thickness x Hole Ø 230 x 1.8 x 22 mm\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eSuperior quality European manufactured and produced to OSA safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eSuperior quality European manufactured and produced to OSA safety standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.076\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Phoenix Extra Thin Flat Cutting Disc 230 x 1.8 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676457852,"sku":"WCD170","price":48.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCD22N.jpg?v=1771562997"},{"product_id":"abracs-phoenix-ii-flat-cutting-disc-75-x-1-0-x-10mm","title":"ABRACS Phoenix II Flat Cutting Disc 75 x 1.0 x 10mm","description":"\u003cp\u003eThe ABRACS Phoenix II Flat Cutting Disc 75 x 1.0 x 10mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WCD23N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eMax RPM 20,400 80 m\/s\u003c\/li\u003e\n\u003cli\u003eO.D. x Thickness x Hole Ø 75 x 1.0 x 10 mm\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eSuperior quality European manufactured and produced to OSA safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eSuperior quality European manufactured and produced to OSA safety standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Phoenix II Flat Cutting Disc 75 x 1.0 x 10mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676490620,"sku":"WCD23N","price":16.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCD23N.jpg?v=1771562998"},{"product_id":"abracs-proflex-extra-thin-flat-cutting-disc-100-x-1-0-x-16mm","title":"ABRACS Proflex Extra Thin Flat Cutting Disc 100 x 1.0 x 16mm","description":"\u003cp\u003eThe ABRACS Proflex Extra Thin Flat Cutting Disc 100 x 1.0 x 16mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 100 x 1.0 x 16mm size. Use Van line reference WCP106 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e100 x 1.0 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Extra Thin Flat Cutting Disc 100 x 1.0 x 16mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676588924,"sku":"WCP106","price":12.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP106.jpg?v=1771563003"},{"product_id":"abracs-proflex-extra-thin-flat-cutting-disc-115-x-1-0-x-22mm-tin","title":"ABRACS Proflex Extra Thin Flat Cutting Disc 115 x 1.0 x 22mm (Tin)","description":"\u003cp\u003eThe ABRACS Proflex Extra Thin Flat Cutting Disc 115 x 1.0 x 22mm (Tin) is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WCP151T when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of Tin of 10\u003c\/li\u003e\n\u003cli\u003eMax RPM 13,300\u003c\/li\u003e\n\u003cli\u003eO.D. x Thickness 115 x 1.0 x 22 mm\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.282\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Extra Thin Flat Cutting Disc 115 x 1.0 x 22mm (Tin)","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676621692,"sku":"WCP151T","price":13.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP151T.jpg?v=1771563004"},{"product_id":"abracs-proflex-extra-thin-flat-cutting-disc-125-x-1-0-x-22mm","title":"ABRACS Proflex Extra Thin Flat Cutting Disc 125 x 1.0 x 22mm","description":"\u003cp\u003eThe ABRACS Proflex Extra Thin Flat Cutting Disc 125 x 1.0 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 125 x 1.0 x 22mm size. Use Van line reference WCP162 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e125 x 1.0 x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Extra Thin Flat Cutting Disc 125 x 1.0 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676654460,"sku":"WCP162","price":14.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP151T_516bde78-3ba3-4499-94b4-7eaa5d64e2de.jpg?v=1771563006"},{"product_id":"abracs-proflex-extra-thin-flat-cutting-disc-125-x-1-6-x-22mm","title":"ABRACS Proflex Extra Thin Flat Cutting Disc 125 x 1.6 x 22mm","description":"\u003cp\u003eThe ABRACS Proflex Extra Thin Flat Cutting Disc 125 x 1.6 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 125 x 1.6 x 22mm size. Use Van line reference WCP166 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e125 x 1.6 x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Extra Thin Flat Cutting Disc 125 x 1.6 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676687228,"sku":"WCP166","price":15.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP151T_d488ad13-e93d-4e18-8ebf-0a2b6c32f46d.jpg?v=1771563008"},{"product_id":"abracs-proflex-extra-thin-flat-cutting-disc-230-x-1-8-x-22mm","title":"ABRACS Proflex Extra Thin Flat Cutting Disc 230 x 1.8 x 22mm","description":"\u003cp\u003eThe ABRACS Proflex Extra Thin Flat Cutting Disc 230 x 1.8 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 230 x 1.8 x 22mm size. Use Van line reference WCP170 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e230 x 1.8 x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Extra Thin Flat Cutting Disc 230 x 1.8 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676719996,"sku":"WCP170","price":26.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP151T_3e3f9f34-2b37-4bba-a61c-c7203e4cf542.jpg?v=1771563010"},{"product_id":"abracs-proflex-dpc-cutting-disc-100-x-3-0-x-16mm","title":"ABRACS Proflex DPC Cutting Disc 100 x 3.0 x 16mm","description":"\u003cp\u003eThe ABRACS Proflex DPC Cutting Disc 100 x 3.0 x 16mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 100 x 3.0 x 16mm size. Use Van line reference WCP171X when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel, sheet steel, high grade steel and iron\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on mild steel, sheet steel, high grade steel and iron. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e100 x 3.0 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.325\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex DPC Cutting Disc 100 x 3.0 x 16mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676752764,"sku":"WCP171X","price":25.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP171.jpg?v=1771563012"},{"product_id":"abracs-proflex-dpc-cutting-disc-115-x-3-0-x-22mm","title":"ABRACS Proflex DPC Cutting Disc 115 x 3.0 x 22mm","description":"\u003cp\u003eThe ABRACS Proflex DPC Cutting Disc 115 x 3.0 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 115 x 3.0 x 22mm size. Use Van line reference WCP173 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel, sheet steel, high grade steel and iron\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on mild steel, sheet steel, high grade steel and iron. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e115 x 3.0 x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex DPC Cutting Disc 115 x 3.0 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676785532,"sku":"WCP173","price":8.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP171_d4183733-0375-4066-b192-17559b42639f.jpg?v=1771563014"},{"product_id":"abracs-proflex-dpc-cutting-disc-230-x-3-0-x-22mm","title":"ABRACS Proflex DPC Cutting Disc 230 x 3.0 x 22mm","description":"\u003cp\u003eThe ABRACS Proflex DPC Cutting Disc 230 x 3.0 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 230 x 3.0 x 22mm size. Use Van line reference WCP179 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel, sheet steel, high grade steel and iron\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on mild steel, sheet steel, high grade steel and iron. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e230 x 3.0 x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.378\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex DPC Cutting Disc 230 x 3.0 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676818300,"sku":"WCP179","price":13.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP171_fd02923e-0cdf-454c-b4ec-fc26374e4e9b.jpg?v=1771563015"},{"product_id":"abracs-proflex-flat-cutting-disc-100-x-3-0-x-16mm","title":"ABRACS Proflex Flat Cutting Disc 100 x 3.0 x 16mm","description":"\u003cp\u003eThe ABRACS Proflex Flat Cutting Disc 100 x 3.0 x 16mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 100 x 3.0 x 16mm size. Use Van line reference WCP216 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eMax RPM 15,300 80 m\/s\u003c\/li\u003e\n\u003cli\u003eO.D. x Thickness x Hole Ø 100 x 3.0 x 16 mm\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel, sheet steel, high grade steel and iron\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on mild steel, sheet steel, high grade steel and iron. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e100 x 3.0 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.247\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Flat Cutting Disc 100 x 3.0 x 16mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676851068,"sku":"WCP216","price":10.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP216.jpg?v=1771563017"},{"product_id":"abracs-proflex-flat-cutting-disc-115-x-3-0-x-22mm","title":"ABRACS Proflex Flat Cutting Disc 115 x 3.0 x 22mm","description":"\u003cp\u003eThe ABRACS Proflex Flat Cutting Disc 115 x 3.0 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 115 x 3.0 x 22mm size. Use Van line reference WCP251 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel, sheet steel, high grade steel and iron\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on mild steel, sheet steel, high grade steel and iron. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e115 x 3.0 x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Flat Cutting Disc 115 x 3.0 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676883836,"sku":"WCP251","price":11.27,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP216_7fb76aa3-53be-4d92-ad5c-75bb46e67ed9.jpg?v=1771563018"},{"product_id":"abracs-proflex-flat-cutting-disc-125-x-3-0-x-22mm","title":"ABRACS Proflex Flat Cutting Disc 125 x 3.0 x 22mm","description":"\u003cp\u003eThe ABRACS Proflex Flat Cutting Disc 125 x 3.0 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 125 x 3.0 x 22mm size. Use Van line reference WCP262 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel, sheet steel, high grade steel and iron\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on mild steel, sheet steel, high grade steel and iron. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e125 x 3.0 x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.376\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Flat Cutting Disc 125 x 3.0 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676916604,"sku":"WCP262","price":12.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP216_d9d322c7-7c5e-41d9-89c9-f00a1235afe7.jpg?v=1771563020"},{"product_id":"abracs-proflex-flat-cutting-disc-230-x-3-0-x-22mm","title":"ABRACS Proflex Flat Cutting Disc 230 x 3.0 x 22mm","description":"\u003cp\u003eThe ABRACS Proflex Flat Cutting Disc 230 x 3.0 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 230 x 3.0 x 22mm size. Use Van line reference WCP270 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel, sheet steel, high grade steel and iron\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on mild steel, sheet steel, high grade steel and iron. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e230 x 3.0 x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.339\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Flat Cutting Disc 230 x 3.0 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676949372,"sku":"WCP270","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP216_962e85a2-0122-4cfc-a11a-9a9a2ab11ede.jpg?v=1771563021"}],"url":"https:\/\/automotopart.co.uk\/collections\/cutting-discs.oembed?page=4","provider":"AutoMotoPart","version":"1.0","type":"link"}