{"title":"Brake Pipe","description":"\n\u003cp\u003eRigid brake pipe carries hydraulic pressure between the master cylinder, ABS modulator, flexible hoses, calipers and wheel cylinders. It must withstand high pressure, vibration, road salt and suspension movement while retaining precise flare seals. Vehicle pipes may be steel, coated steel, stainless in approved applications or copper-nickel alloy; material and dimensions must meet the braking system's specification.\u003c\/p\u003e\n\u003cp\u003eSelect by VIN and exact circuit, or reproduce a pipe only from verified data. Confirm outside diameter, wall\/material standard, metric or imperial union thread, male or female nut, DIN\/ISO bubble or SAE double\/inverted flare, length, routing and protective coating. The threads clamp the flare; they do not seal, so matching thread alone is insufficient.\u003c\/p\u003e\n\u003cp\u003eFluid wetness, severe corrosion, a soft or sinking pedal and MOT inspection findings require immediate attention. Inspect the complete run, especially clips, bends, rear subframes, under trays and transitions to flexible hoses. Surface staining differs from deep pitting, but scraping or coating cannot prove remaining wall thickness. Never use compression plumbing fittings or join a pipe simply to avoid difficult routing.\u003c\/p\u003e\n\u003cp\u003eBrake fluid damages paint and absorbs moisture. Use the specified DOT type, eye protection and clean caps. Depressurise brake-by-wire or accumulator systems by the vehicle procedure. Form pipes with a proper bender, cut square, deburr without thinning, fit the correct nut before flaring and inspect the completed flare for symmetry and cracks. Avoid annealing or heating brake pipe.\u003c\/p\u003e\n\u003cp\u003eRoute on the original protected path with all clips, grommets and clearances from exhaust, steering, driveshafts and suspension. Start unions by hand, align without pulling the pipe into place and torque to specification. Bleed the affected circuit, including diagnostic ABS cycling where required, then apply sustained pedal pressure and inspect every union. Verify a firm pedal and measured brake balance before road use. Stop for any leak, bulging, interference or pedal change. Vehicle-specific brake pipes and unions are listed below.\u003c\/p\u003e","products":[{"product_id":"apec-acba1000-3-16-copper-brake-pipe-22g-x-25ft","title":"3\/16in. Copper Brake Pipe 22g x 25ft","description":"\u003cp\u003eThe 3\/16in. Copper Brake Pipe 22g x 25ft is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1000 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12449\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12449\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 3\/16 Copper Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322353135996,"sku":"ACBA1000","price":21.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1000.jpg?v=1771530090"},{"product_id":"apec-acba1001-10mm-cupro-nickel-brake-pipe-0-71mm-x-7-5m","title":"10MM Cupro Nickel Brake Pipe 0.71MM X 7.5M","description":"\u003cp\u003eThe 10MM Cupro Nickel Brake Pipe 0.71MM X 7.5M is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1001 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12450\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12450\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e490\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e490\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.445\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 10mm Cupro Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322353201532,"sku":"ACBA1001","price":52.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1001.jpg?v=1771530092"},{"product_id":"apec-acba1002-1-4-cupro-brake-pipe-22g-x-25ft","title":"1\/4in. Cupro Nickel Brake Pipe 22g x 25ft","description":"\u003cp\u003eThe 1\/4in. Cupro Nickel Brake Pipe 22g x 25ft is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1002 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12451\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12451\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 1\/4 Cupro Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322353267068,"sku":"ACBA1002","price":31.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1002.jpg?v=1771530093"},{"product_id":"apec-acba1003-3-16-cupro-brake-pipe-22g-x-25ft","title":"3\/16in. Cupro Nickel Brake Pipe 22g x 25ft","description":"\u003cp\u003eThe 3\/16in. Cupro Nickel Brake Pipe 22g x 25ft is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1003 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12452\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12452\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 3\/16 Cupro Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322353332604,"sku":"ACBA1003","price":22.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1003.jpg?v=1771530095"},{"product_id":"apec-acba1004-3-8-cupro-brake-pipe-22g-x-25ft","title":"3\/8in. Cupro Nickel Brake Pipe 22g x 25ft","description":"\u003cp\u003eThe 3\/8in. Cupro Nickel Brake Pipe 22g x 25ft is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1004 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12453\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12453\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 3\/8 Cupro Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322353398140,"sku":"ACBA1004","price":53.34,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1004.jpg?v=1771530095"},{"product_id":"apec-acba1005-5-16-cupro-brake-pipe-22g-x-25ft","title":"5\/16in. Cupro Nickel Brake Pipe 22g x 25ft","description":"\u003cp\u003eThe 5\/16in. Cupro Nickel Brake Pipe 22g x 25ft is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1005 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12454\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12454\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 5\/16 Cupro Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322353496444,"sku":"ACBA1005","price":40.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1005.jpg?v=1771530097"},{"product_id":"apec-acba1006-6mm-cupro-brake-pipe-0-71mm-x-7-5m","title":"6mm Cupro Nickel Brake Pipe 0.71mm x 7.5m","description":"\u003cp\u003eThe 6mm Cupro Nickel Brake Pipe 0.71mm x 7.5m is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1006 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12455\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12455\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.805\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 6mm Cupro Brake pipe 0.71mm X 7.5m","brand":"APEC","offers":[{"title":"1","offer_id":56322353561980,"sku":"ACBA1006","price":29.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1006.jpg?v=1771530099"},{"product_id":"apec-acba1007-8mm-cupro-brake-pipe-0-71mm-x-7-5m","title":"8mm Cupro Nickel Brake Pipe 0.71mm x 7.5m","description":"\u003cp\u003eThe 8mm Cupro Nickel Brake Pipe 0.71mm x 7.5m is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1007 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12456\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12456\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 8mm Cupro Brake pipe 0.71mm X 7.5m","brand":"APEC","offers":[{"title":"1","offer_id":56322353627516,"sku":"ACBA1007","price":43.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1007.jpg?v=1771530100"},{"product_id":"apec-acba1008-10mm-copper-brake-pipe-0-71mm-x7-5m","title":"10mm Copper Brake Pipe 0.71mm x 7.5m","description":"\u003cp\u003eThe 10mm Copper Brake Pipe 0.71mm x 7.5m is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1008 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12457\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12457\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e490\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e490\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 10mm Copper Brake pipe 0.71mm X7.5m","brand":"APEC","offers":[{"title":"1","offer_id":56322353693052,"sku":"ACBA1008","price":39.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1008.jpg?v=1771530101"},{"product_id":"apec-acba1009-1-2-copper-brake-pipe-22g-x-25ft","title":"1\/2in. Copper Brake Pipe 22g x 25ft","description":"\u003cp\u003eThe 1\/2in. Copper Brake Pipe 22g x 25ft is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1009 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12458\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12458\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 1\/2 Copper Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322353758588,"sku":"ACBA1009","price":53.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1009.jpg?v=1771530103"},{"product_id":"apec-acba1010-1-4-copper-brake-pipe-22g-x-25ft","title":"1\/4in. Copper Brake Pipe 22g x 25ft","description":"\u003cp\u003eThe 1\/4in. Copper Brake Pipe 22g x 25ft is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1010 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12459\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12459\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.82\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 1\/4 Copper Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322353824124,"sku":"ACBA1010","price":23.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1010.jpg?v=1771530104"},{"product_id":"apec-acba1011-12mm-copper-brake-pipe-0-71mmx7-5m","title":"12mm Copper Brake Pipe 0.71mm x 7.5m","description":"\u003cp\u003eThe 12mm Copper Brake Pipe 0.71mm x 7.5m is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1011 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12460\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12460\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 12mm Copper Brake pipe  0.71mmX7.5m","brand":"APEC","offers":[{"title":"1","offer_id":56322353889660,"sku":"ACBA1011","price":50.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1011.jpg?v=1771530106"},{"product_id":"apec-acba1012-3-8-copper-brake-pipe-22g-x-25ft","title":"3\/8in. Copper Brake Pipe 22g x 25ft","description":"\u003cp\u003eThe 3\/8in. Copper Brake Pipe 22g x 25ft is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1012 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12461\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12461\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 3\/8 Copper Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322353955196,"sku":"ACBA1012","price":37.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1012.jpg?v=1771530108"},{"product_id":"apec-acba1013-5-16-copper-brake-pipe-22g-x-25ft","title":"5\/16in. Copper Brake Pipe 22g x 25ft","description":"\u003cp\u003eThe 5\/16in. Copper Brake Pipe 22g x 25ft is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1013 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12462\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12462\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 5\/16 Copper Brake pipe 22G X 25ft","brand":"APEC","offers":[{"title":"1","offer_id":56322354020732,"sku":"ACBA1013","price":30.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1013.jpg?v=1771530110"},{"product_id":"apec-acba1014-6mm-copper-brake-pipe-x-0-71mm-7-5m","title":"6mm Copper Brake Pipe 0.71mm x 7.5m","description":"\u003cp\u003eThe 6mm Copper Brake Pipe 0.71mm x 7.5m is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1014 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12463\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12463\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 6mm Copper Brake pipe X 0.71mm 7.5m","brand":"APEC","offers":[{"title":"1","offer_id":56322354086268,"sku":"ACBA1014","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1014.jpg?v=1771530111"},{"product_id":"apec-acba1015-8mm-copper-brake-pipe-x-0-71mm-7-5m","title":"8mm Copper Brake Pipe 0.71mm x 7.5m","description":"\u003cp\u003eThe 8mm Copper Brake Pipe 0.71mm x 7.5m is a brake hydraulic pipe material or assembly that carries hydraulic brake fluid between compatible braking-system components. Its catalogue specification records Conforms to BS EN 12449 technical info. Use Apec reference ACBA1015 when cross-checking the part. Confirm the pipe material, outside diameter, wall thickness, length, flare type and fittings before use; form and install brake pipes with approved tools, then pressure-test and bleed the system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einternal cleanliness to BS EN12464\u003c\/li\u003e\n\u003cli\u003e100% electronically and pressure tested\u003c\/li\u003e\n\u003cli\u003eseamless\u003c\/li\u003e\n\u003cli\u003esolid drawn\u003c\/li\u003e\n\u003cli\u003eTo BS EN 12464\u003c\/li\u003e\n\u003cli\u003eMade from solid drawn, seamless metal\u003c\/li\u003e\n\u003cli\u003eIndividually wrapped brake pipe coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eConforms to BS EN 12449\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAPEC 8mm Copper Brake pipe X 0.71mm 7.5m","brand":"APEC","offers":[{"title":"1","offer_id":56322354151804,"sku":"ACBA1015","price":34.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/ACBA1015.jpg?v=1771530112"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/collections\/brake_pipe.png?v=1770732726","url":"https:\/\/automotopart.co.uk\/collections\/p_brake-pipe.oembed?page=2","provider":"AutoMotoPart","version":"1.0","type":"link"}