{"title":"Tensioner Pulley (V-ribbed)","description":"\n\u003cp\u003eA V-ribbed-belt tensioner pulley guides the auxiliary belt and, when mounted on a spring-loaded tensioner arm, helps maintain belt tension as temperature and load change. Some listings contain only the pulley and bearing; others are fixed idlers or complete automatic-tensioner assemblies. Confirm the supplied part because a new pulley cannot repair a weak spring, worn pivot, failed damper or misaligned tensioner arm.\u003c\/p\u003e\n\u003cp\u003eSelect by VIN, engine code, auxiliary layout, production date and original-equipment reference. Compare pulley diameter and width, smooth or grooved running face, rib count, bearing bore, offset, shoulder\/spacer arrangement, bolt direction and rotation speed. A smooth pulley normally contacts the belt back; a grooved pulley contacts the ribbed side. Wrong offset or spacers can move the belt out of plane and destroy its edges.\u003c\/p\u003e\n\u003cp\u003eSymptoms include chirp, squeal, rumble, grinding, belt flutter, a wandering tensioner arm, frayed belt edges, black dust or a seized bearing. Similar noises come from alternator overrunning pulleys, air-conditioning compressors, crank dampers, water pumps, power-steering pumps and belt contamination. Remove the belt by the safe procedure and turn each accessory by hand, inspect alignment and observe tensioner movement before ordering parts.\u003c\/p\u003e\n\u003cp\u003eWork on a cold stationary engine with the key removed and automatic starting disabled. A loaded tensioner stores spring energy: use the intended square drive or tool and keep fingers out of belt\/pulley pinch points. Do not lever against plastic pulleys or use the retaining hole as a stop unless specified. Record belt routing before removal and support any engine mount removed for access.\u003c\/p\u003e\n\u003cp\u003eFit the correct pulley, spacers and new fastener where required, holding the tensioner by the approved method and applying specified torque. Route every rib into its groove, release tension slowly and inspect alignment before starting. Test at idle from a safe position without reaching into the drive, then check steering\/charging\/air-conditioning functions as applicable. A thrown or seized auxiliary belt can cause overheating, loss of charging or steering assistance, and on some engines belt debris can enter the timing drive.\u003c\/p\u003e","products":[{"product_id":"gates-t38030-tensioner-pulley-v-ribbed-belt","title":"Gates T38030 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T38030 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records with grooves, 4 number of grooves, 73 mm outer diameter, and 20.5 mm width. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith grooves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of grooves :\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e20.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315515797884,"sku":"T38030","price":59.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T38030_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770191522"},{"product_id":"febi-176027-tensioner-pulley-v-ribbed-belt","title":"Febi 176027 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Febi 176027 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 33 mm width of castor bearing surface, 74 mm outer diameter, 10 mm mounting points diameter, and metal construction. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth of castor bearing surface [mm] :\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting points diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56338129453436,"sku":"176027","price":53.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_176027_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770606701"},{"product_id":"gates-t36885-tensioner-pulley-v-ribbed-belt","title":"Gates T36885 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T36885 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records metal construction, 70 mm outer diameter, 34 mm width, and 16 mm bolt head diameter. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBolt Head Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56338186305916,"sku":"T36885","price":46.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T36885_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770607283"},{"product_id":"blue-print-adn19654-tensioner-pulley-v-ribbed-belt","title":"Blue Print ADN19654 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Blue Print ADN19654 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 12 mm width of castor bearing surface, 79 mm outer diameter, metal construction, and with screw. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth of castor bearing surface [mm] :\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e79\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAir conditioning compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BLUE PRINT","offers":[{"title":"1","offer_id":56344025661820,"sku":"ADN19654","price":75.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Blue_Print_ADN19654_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770680294"},{"product_id":"gates-t36087-tensioner-pulley-v-ribbed-belt","title":"Gates T36087 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T36087 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records Smooth surface, 84 mm outer diameter, 25 mm width, and Alternator driven units. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e12.2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e09.2004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with air conditioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349139992956,"sku":"T36087","price":92.31,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T36087_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770752312"},{"product_id":"gates-t36336-tensioner-pulley-v-ribbed-belt","title":"Gates T36336 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T36336 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 84 mm outer diameter, 12 mm inner diameter, 12 mm bolt head diameter, and Fairlady Z and 350Z vehicle type. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBolt Head Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e08.2005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle type :\u003c\/td\u003e\n\u003ctd\u003eFairlady Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e06.2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle type :\u003c\/td\u003e\n\u003ctd\u003e350Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349162701180,"sku":"T36336","price":18.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T36336_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770752888"},{"product_id":"gates-t38089-tensioner-pulley-v-ribbed-belt","title":"Gates T38089 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T38089 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records metal construction, 80 mm outer diameter, 8 mm inner diameter, and 26 mm width. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349315793276,"sku":"T38089","price":47.22,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56349315858812,"sku":"T38089","price":47.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T38089_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770754564"},{"product_id":"gates-t38092-tensioner-pulley-v-ribbed-belt","title":"Gates T38092 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T38092 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records with grooves, plastic construction, 76 mm outer diameter, and 8 mm inner diameter. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith grooves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of grooves :\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e76\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e08.1985\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e08.1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349321953660,"sku":"T38092","price":38.34,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56349322379644,"sku":"T38092","price":38.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T38092_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770754575"},{"product_id":"gates-t39593-tensioner-pulley-v-ribbed-belt","title":"Gates T39593 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39593 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records Smooth surface, 0 number of grooves, 70 mm outer diameter, and 26 mm width. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of grooves :\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349685219708,"sku":"T39593","price":111.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39593_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770755019"},{"product_id":"gates-t39596-tensioner-pulley-v-ribbed-belt","title":"Gates T39596 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39596 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records metal construction, 70 mm outer diameter, 10 mm inner diameter, and 26 mm width. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e05.2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349696852348,"sku":"T39596","price":104.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39596_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770755032"},{"product_id":"gates-t36000-tensioner-pulley-v-ribbed-belt","title":"Gates T36000 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T36000 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records with grooves, 81 mm outer diameter, 8 mm inner diameter, and 26.4 mm width. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith grooves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of grooves :\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e26.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349788832124,"sku":"T36000","price":35.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T36000_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770755130"},{"product_id":"gates-t36003-tensioner-pulley-v-ribbed-belt","title":"Gates T36003 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T36003 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 100.5 mm outer diameter, 28 mm width, and Alternator driven units. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e100.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e06.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349801677180,"sku":"T36003","price":77.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T36003_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770755140"},{"product_id":"gates-t36023-tensioner-pulley-v-ribbed-belt","title":"Gates T36023 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T36023 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 94 mm outer diameter and 26 mm width. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349815374204,"sku":"T36023","price":87.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T36023_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770755155"},{"product_id":"gates-t36059-tensioner-pulley-v-ribbed-belt","title":"Gates T36059 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T36059 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 85 mm outer diameter, 26 mm width, and Alternator driven units. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with air conditioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without power steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with power steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without air conditioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349833888124,"sku":"T36059","price":57.62,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56349835067772,"sku":"T36059","price":57.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T36059_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770755171"},{"product_id":"gates-t36161-tensioner-pulley-v-ribbed-belt","title":"Gates T36161 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T36161 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 70 mm outer diameter, 23 mm width, and Alternator driven units. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e01.1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56349860069756,"sku":"T36161","price":26.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T36161_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770755192"},{"product_id":"gates-t36408-tensioner-pulley-v-ribbed-belt","title":"Gates T36408 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T36408 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 70 mm outer diameter, 22 mm width, and Alternator driven units. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e12.2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e04.2008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e05.2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e05.2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"Default Title","offer_id":56349868589436,"sku":"T36408","price":58.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T36408_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1771613598"},{"product_id":"gates-t38231-tensioner-pulley-v-ribbed-belt","title":"Gates T38231 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T38231 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 70 mm outer diameter, Berlingo MultiSpace, M49, and M59 vehicle type, Israel not for country specific design, and Israel country specific design. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e11.1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e10.2005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle type :\u003c\/td\u003e\n\u003ctd\u003eBerlingo MultiSpace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with air conditioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with power steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Code :\u003c\/td\u003e\n\u003ctd\u003eWJZ (DW8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efor RPO number from :\u003c\/td\u003e\n\u003ctd\u003e08028\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle type :\u003c\/td\u003e\n\u003ctd\u003eM49\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003enot for country specific design :\u003c\/td\u003e\n\u003ctd\u003eIsrael\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e07.1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Code :\u003c\/td\u003e\n\u003ctd\u003eWJY (DW8B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle type :\u003c\/td\u003e\n\u003ctd\u003eM59\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry Specific Design :\u003c\/td\u003e\n\u003ctd\u003eIsrael\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e02.1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e07.2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efor RPO number from :\u003c\/td\u003e\n\u003ctd\u003e08120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efor RPO number up to :\u003c\/td\u003e\n\u003ctd\u003e09376\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e10.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efor RPO number from :\u003c\/td\u003e\n\u003ctd\u003e08729\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e07.2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efor RPO number from :\u003c\/td\u003e\n\u003ctd\u003e09377\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56350172348796,"sku":"T38231","price":59.85,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56350173167996,"sku":"T38231","price":59.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T38231_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770755543"},{"product_id":"gates-t39011-tensioner-pulley-v-ribbed-belt","title":"Gates T39011 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39011 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 60 mm outer diameter, 10 mm inner diameter, 30.5 mm width, and Alternator driven units. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e30.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56350903992700,"sku":"T39011","price":57.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39011_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770756623"},{"product_id":"gates-t39056-tensioner-pulley-v-ribbed-belt","title":"Gates T39056 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39056 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records Smooth surface, 56 mm outer diameter, and 21 mm width. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56350972903804,"sku":"T39056","price":31.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39056_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770756712"},{"product_id":"gates-t39057-tensioner-pulley-v-ribbed-belt","title":"Gates T39057 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39057 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 65 mm outer diameter, 25.5 mm width, Alternator driven units, and for vehicles with air conditioning vehicle equipment. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e25.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e09.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e02.2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with air conditioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56350978507132,"sku":"T39057","price":34.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39057_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770756721"},{"product_id":"gates-t39181-tensioner-pulley-v-ribbed-belt","title":"Gates T39181 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39181 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 60 mm outer diameter, 19 mm width, and Air conditioning compressor driven units. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAir conditioning compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56351375688060,"sku":"T39181","price":56.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39181_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770757238"},{"product_id":"gates-t39184-tensioner-pulley-v-ribbed-belt","title":"Gates T39184 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39184 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 79 mm outer diameter, 12 mm inner diameter, 19 mm width, and Navara and Frontier vehicle type. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e79\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle type :\u003c\/td\u003e\n\u003ctd\u003eNavara\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003ePower steering pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e01.2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e12.2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle type :\u003c\/td\u003e\n\u003ctd\u003eFrontier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Year to :\u003c\/td\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56351376179580,"sku":"T39184","price":29.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39184_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770757247"},{"product_id":"gates-t39225-tensioner-pulley-v-ribbed-belt","title":"Gates T39225 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39225 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records Smooth surface, 88 mm outer diameter, 19 mm width, and Power steering pump driven units. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e02.2015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003ePower steering pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56351500894588,"sku":"T39225","price":123.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39225_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770757462"},{"product_id":"gates-t39241-tensioner-pulley-v-ribbed-belt","title":"Gates T39241 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39241 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records Smooth surface, 85.1 mm outer diameter, 34.8 mm width, and Navara and Frontier vehicle type. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eSmooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e85.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e34.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e01.2010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle type :\u003c\/td\u003e\n\u003ctd\u003eNavara\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003eAlternator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e01.2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e12.2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle type :\u003c\/td\u003e\n\u003ctd\u003eFrontier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Year to :\u003c\/td\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56351551684988,"sku":"T39241","price":35.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39241_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770757543"},{"product_id":"gates-t39245-tensioner-pulley-v-ribbed-belt","title":"Gates T39245 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T39245 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records 90 mm outer diameter, 25 mm width, Power steering pump driven units, and for vehicles with air conditioning vehicle equipment. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e05.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriven Units :\u003c\/td\u003e\n\u003ctd\u003ePower steering pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with air conditioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56351562531196,"sku":"T39245","price":74.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T39245_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770757554"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/collections\/tensioner_pully_v_ribbed.png?v=1770993835","url":"https:\/\/automotopart.co.uk\/collections\/p_tensioner-pulley-v-ribbed.oembed?page=2","provider":"AutoMotoPart","version":"1.0","type":"link"}