{"title":"Top Strut Mount \u0026 Bearing","description":"\n\u003cp\u003eA top strut mount attaches a suspension strut to the vehicle body while isolating road noise and carrying vertical and side loads. On a steered MacPherson strut, a separate or integrated bearing allows the strut and coil spring to rotate as the wheels turn. The assembly can include bonded rubber, a metal load plate, bearing, upper spring seat, dust seal, locating studs and a centre sleeve for the damper rod.\u003c\/p\u003e\n\u003cp\u003eMounts and bearings are specific to side, axle, suspension package and body structure. Similar parts may differ in stud pattern, height, offset, spring-seat angle, bearing diameter, damper-rod bore and orientation marks. Sport, heavy-duty, adaptive-damper and electronically controlled suspension can use distinct mounts. A bearing supplied separately must match both the mount and upper spring seat; missing washers or inverted components change the load path.\u003c\/p\u003e\n\u003cp\u003eSelect using registration or VIN, exact model and production date, body style, front or rear axle, left or right side and suspension option. Compare the original equipment reference, mount studs and index marks, bearing profile, spring diameter and end-stop position, damper shaft arrangement and kit contents. Confirm whether new nuts, bolts, bump stops, dust boots or spring seats are required and whether mounts should be renewed in axle pairs.\u003c\/p\u003e\n\u003cp\u003eFault signs include clunks over bumps, creaking while steering, notchy or heavy steering, spring wind-up, uneven ride height, visible rubber separation, a raised centre sleeve or excessive movement at the strut tower. Similar symptoms can arise from broken springs, drop links, ball joints, steering joints, dampers, subframe movement or loose fasteners. A bearing can bind without obvious free play.\u003c\/p\u003e\n\u003cp\u003eReplacement requires a sound, correctly rated spring compressor and competent handling of stored spring energy. Never remove the strut centre nut until the spring is securely compressed and loose in its seats. Mark orientation, support brake hoses and sensor wiring, use specified new fasteners and tighten the rod without damaging it. Confirm spring ends, bearing and mount are seated and indexed before releasing compression. Refit, torque at the stated vehicle condition and perform wheel alignment where geometry was disturbed. Top strut mounts and bearings matching the selected vehicle are listed below.\u003c\/p\u003e","products":[{"product_id":"corteco-80001222-rolling-bearing-suspension-strut-support-mount","title":"Corteco 80001222 Rolling Bearing, suspension strut support mount","description":"\u003cp\u003eThe Corteco 80001222 Rolling Bearing, suspension strut support mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle left, front axle right, and upper fitting position. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRolling Bearing, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eUpper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight [kg] :\u003c\/td\u003e\n\u003ctd\u003e0.14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CORTECO","offers":[{"title":"1","offer_id":56333075612028,"sku":"80001222","price":15.69,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Corteco_80001222_Rolling_Bearing_suspension_strut_support_mount_1.jpg?v=1770547245"},{"product_id":"febi-05472-mounting-shock-absorber","title":"Febi 05472 Mounting, shock absorber","description":"\u003cp\u003eThe Febi 05472 Mounting, shock absorber is a replacement suspension damping component that controls spring movement to help maintain tyre contact and predictable body control. Its catalogue specification records 39 mm length, 20 mm inner diameter, 40 mm outer diameter, and rubber construction. Match the reference, damping design, mounting arrangement, fitting position and vehicle application before fitting; axle-pair replacement and wheel alignment may be required.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eMounting, shock absorber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength [mm] :\u003c\/td\u003e\n\u003ctd\u003e39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56336421519740,"sku":"05472","price":14.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_05472_Mounting_shock_absorber_1.jpg?v=1770587253"},{"product_id":"febi-05585-mounting-shock-absorber","title":"Febi 05585 Mounting, shock absorber","description":"\u003cp\u003eThe Febi 05585 Mounting, shock absorber is a replacement suspension damping component that controls spring movement to help maintain tyre contact and predictable body control. Its catalogue specification records 22 mm inner diameter, 47 mm outer diameter, rubber construction, and rear axle lower and lower front axle fitting position. Match the reference, damping design, mounting arrangement, fitting position and vehicle application before fitting; axle-pair replacement and wheel alignment may be required.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eMounting, shock absorber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle Lower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLower Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56336421716348,"sku":"05585","price":16.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_05585_Mounting_shock_absorber_1.jpg?v=1770587260"},{"product_id":"febi-109004-mounting-shock-absorber","title":"Febi 109004 Mounting, shock absorber","description":"\u003cp\u003eThe Febi 109004 Mounting, shock absorber is a replacement suspension damping component that controls spring movement to help maintain tyre contact and predictable body control. Its catalogue specification records 16 mm inner diameter, 45 mm outer diameter, rubber\/Metal construction, and front axle left and front axle right fitting position. Match the reference, damping design, mounting arrangement, fitting position and vehicle application before fitting; axle-pair replacement and wheel alignment may be required.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eMounting, shock absorber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56336427254140,"sku":"109004","price":12.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_109004_Mounting_shock_absorber_1.jpg?v=1770587459"},{"product_id":"febi-32401a-mounting-shock-absorber","title":"Febi 32401A Mounting, shock absorber","description":"\u003cp\u003eThe Febi 32401A Mounting, shock absorber is a replacement suspension damping component that controls spring movement to help maintain tyre contact and predictable body control. Its catalogue specification records 19 mm inner diameter, 74 mm outer diameter, rubber\/Metal construction, and lower, front axle left, and front axle right fitting position. Match the reference, damping design, mounting arrangement, fitting position and vehicle application before fitting; axle-pair replacement and wheel alignment may be required.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eMounting, shock absorber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength [mm] :\u003c\/td\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHole Spacing [mm] :\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56336475980156,"sku":"32401A","price":34.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_32401A_Mounting_shock_absorber_1.jpg?v=1770587957"},{"product_id":"febi-183026-mounting-shock-absorber","title":"Febi 183026 Mounting, shock absorber","description":"\u003cp\u003eThe Febi 183026 Mounting, shock absorber is a replacement suspension damping component that controls spring movement to help maintain tyre contact and predictable body control. Its catalogue specification records 22 mm inner diameter, 49.5 mm outer diameter, rubber\/Metal construction, and lower front axle and rear axle lower fitting position. Match the reference, damping design, mounting arrangement, fitting position and vehicle application before fitting; axle-pair replacement and wheel alignment may be required.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eMounting, shock absorber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e109\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e49.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Thread Size :\u003c\/td\u003e\n\u003ctd\u003eM16 x 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLower Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle Lower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info :\u003c\/td\u003e\n\u003ctd\u003ewith attachment\/mounting material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337403904380,"sku":"183026","price":18.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_183026_Mounting_shock_absorber_1.jpg?v=1770593583"},{"product_id":"corteco-80001663-repair-kit-suspension-strut-support-mount","title":"Corteco 80001663 Top Strut Mount","description":"\u003cp\u003eThe Corteco 80001663 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle left and front axle right fitting position, 2 required quantity, and with ball bearing. It is listed in the repair Kit, suspension strut support mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired quantity :\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CORTECO","offers":[{"title":"1","offer_id":56337448337788,"sku":"80001663","price":22.22,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337448403324,"sku":"80001663","price":22.22,"currency_code":"GBP","in_stock":true},{"title":"3","offer_id":56337448436092,"sku":"80001663","price":22.22,"currency_code":"GBP","in_stock":true},{"title":"4","offer_id":56337448468860,"sku":"80001663","price":22.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Corteco_80001663_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770594667"},{"product_id":"febi-102532-repair-kit-suspension-strut-support-mount","title":"Febi 102532 Top Strut Mount","description":"\u003cp\u003eThe Febi 102532 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records M8 x 1,25 internal thread size, rubber\/Metal construction, 6 mounting holes, and front axle right and front axle left fitting position. It is listed in the repair Kit, suspension strut support mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Thread Size :\u003c\/td\u003e\n\u003ctd\u003eM8 x 1,25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Holes :\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337614799228,"sku":"102532","price":76.31,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337614831996,"sku":"102532","price":76.31,"currency_code":"GBP","in_stock":true},{"title":"3","offer_id":56337614897532,"sku":"102532","price":76.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_102532_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597618"},{"product_id":"febi-103970-repair-kit-suspension-strut-support-mount","title":"Febi 103970 Top Strut Mount","description":"\u003cp\u003eThe Febi 103970 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records paired reference 103973, rubber\/Metal construction, front axle left fitting position, and with ball bearing. It is listed in the repair Kit, suspension strut support mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epaired article number :\u003c\/td\u003e\n\u003ctd\u003e103973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337615323516,"sku":"103970","price":43.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_103970_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597628"},{"product_id":"febi-103973-repair-kit-suspension-strut-support-mount","title":"Febi 103973 Top Strut Mount","description":"\u003cp\u003eThe Febi 103973 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records paired reference 103970, rubber\/Metal construction, front axle right fitting position, and with ball bearing. It is listed in the repair Kit, suspension strut support mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epaired article number :\u003c\/td\u003e\n\u003ctd\u003e103970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337615618428,"sku":"103973","price":43.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_103973_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597635"},{"product_id":"febi-109439-repair-kit-suspension-strut-support-mount","title":"Febi 109439 Top Strut Mount","description":"\u003cp\u003eThe Febi 109439 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records rubber\/Metal construction, front axle fitting position, and with ball bearing. It is listed in the repair Kit, suspension strut support mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337615913340,"sku":"109439","price":57.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_109439_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597643"},{"product_id":"febi-12702a-suspension-strut-support-mount","title":"Febi 12702A Suspension Strut Support Mount","description":"\u003cp\u003eThe Febi 12702A Suspension Strut Support Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records Paper seal material, rubber\/Metal construction, with gasket\/seal, and rear axle fitting position. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Material :\u003c\/td\u003e\n\u003ctd\u003ePaper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info :\u003c\/td\u003e\n\u003ctd\u003ewith gasket\/seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewithout ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337616208252,"sku":"12702A","price":11.85,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_12702A_Suspension_Strut_Support_Mount_1.jpg?v=1770597651"},{"product_id":"febi-18755a-repair-kit-suspension-strut-support-mount","title":"Febi 18755A Repair Kit, suspension strut support mount","description":"\u003cp\u003eThe Febi 18755A Repair Kit, suspension strut support mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records M8 x 1,25 internal thread size, rubber\/Metal construction, front axle right fitting position, and with ball bearing. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epaired article number :\u003c\/td\u003e\n\u003ctd\u003e18756\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Thread Size :\u003c\/td\u003e\n\u003ctd\u003eM8 x 1,25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337616699772,"sku":"18755A","price":21.56,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_18755A_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597667"},{"product_id":"febi-18757a-repair-kit-suspension-strut-support-mount","title":"Febi 18757A Repair Kit, suspension strut support mount","description":"\u003cp\u003eThe Febi 18757A Repair Kit, suspension strut support mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records paired reference 18758, rubber\/Metal construction, front axle right fitting position, and with ball bearing. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epaired article number :\u003c\/td\u003e\n\u003ctd\u003e18758\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337616994684,"sku":"18757A","price":18.78,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_18757A_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597675"},{"product_id":"febi-19512a-suspension-strut-support-mount","title":"Febi 19512A Suspension Strut Support Mount","description":"\u003cp\u003eThe Febi 19512A Suspension Strut Support Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records 10 mm inner diameter, 65 mm outer diameter, rubber\/Metal construction, and front axle left and front axle right fitting position. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength [mm] :\u003c\/td\u003e\n\u003ctd\u003e133\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e129\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewithout ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337617387900,"sku":"19512A","price":22.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_19512A_Suspension_Strut_Support_Mount_1.jpg?v=1770597685"},{"product_id":"febi-31984a-suspension-strut-support-mount","title":"Febi 31984A Suspension Strut Support Mount","description":"\u003cp\u003eThe Febi 31984A Suspension Strut Support Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records rubber\/Metal construction, rear axle left and rear axle right fitting position, Rubber-Metal Mount mounting type, and without ball bearing. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Type :\u003c\/td\u003e\n\u003ctd\u003eRubber-Metal Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewithout ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337617748348,"sku":"31984A","price":24.63,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337617813884,"sku":"31984A","price":24.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_31984A_Suspension_Strut_Support_Mount_1.jpg?v=1770597697"},{"product_id":"febi-32164a-suspension-strut-support-mount","title":"Febi 32164A Suspension Strut Support Mount","description":"\u003cp\u003eThe Febi 32164A Suspension Strut Support Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records 11 mm inner diameter, 67 and 73 mm outer diameter, rubber\/Metal construction, and rear axle fitting position. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength [mm] :\u003c\/td\u003e\n\u003ctd\u003e138\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewithout ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337618174332,"sku":"32164A","price":21.88,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337618239868,"sku":"32164A","price":21.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_32164A_Suspension_Strut_Support_Mount_1.jpg?v=1770597707"},{"product_id":"febi-32748a-repair-kit-suspension-strut-support-mount","title":"Febi 32748A Repair Kit, suspension strut support mount","description":"\u003cp\u003eThe Febi 32748A Repair Kit, suspension strut support mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records rubber\/Metal construction, front axle fitting position, and with ball bearing. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337618600316,"sku":"32748A","price":48.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_32748A_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597715"},{"product_id":"febi-34626-rolling-bearing-suspension-strut-support-mount","title":"Febi 34626 Rolling Bearing, suspension strut support mount","description":"\u003cp\u003eThe Febi 34626 Rolling Bearing, suspension strut support mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records 62 mm inner diameter, 85 mm outer diameter, Rolling Bearing bearing type, and front axle left and front axle right fitting position. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRolling Bearing, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e12.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eyellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Type :\u003c\/td\u003e\n\u003ctd\u003eRolling Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337618796924,"sku":"34626","price":21.45,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_34626_Rolling_Bearing_suspension_strut_support_mount_1.jpg?v=1770597722"},{"product_id":"febi-37581a-repair-kit-suspension-strut-support-mount","title":"Febi 37581A Repair Kit, suspension strut support mount","description":"\u003cp\u003eThe Febi 37581A Repair Kit, suspension strut support mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position and without ball bearing and with fastening material. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewithout ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith fastening material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337619157372,"sku":"37581A","price":16.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_37581A_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597730"},{"product_id":"febi-38584-suspension-strut-support-mount","title":"Febi 38584 Top Strut Mount","description":"\u003cp\u003eThe Febi 38584 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records 11 mm inner diameter, 108 mm outer diameter, rubber\/Metal construction, and rear axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewithout ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337619452284,"sku":"38584","price":55.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_38584_Suspension_Strut_Support_Mount_1.jpg?v=1770597737"},{"product_id":"febi-46046-repair-kit-suspension-strut-support-mount","title":"Febi 46046 Repair Kit, suspension strut support mount","description":"\u003cp\u003eThe Febi 46046 Repair Kit, suspension strut support mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records 14 mm inner diameter, rubber\/Metal construction, front axle left and front axle right fitting position, and with ball bearing. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditionally required parts :\u003c\/td\u003e\n\u003ctd\u003eBolt kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditionally required articles (article numbers) :\u003c\/td\u003e\n\u003ctd\u003eBMW 31 30 6 851 799\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337619714428,"sku":"46046","price":67.48,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_46046_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597745"},{"product_id":"febi-47358-suspension-strut-support-mount","title":"Febi 47358 Top Strut Mount","description":"\u003cp\u003eThe Febi 47358 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records 105 mm outer diameter, rubber\/Metal construction, front axle and lower fitting position, and without ball bearing. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewithout ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FEBI","offers":[{"title":"1","offer_id":56337620042108,"sku":"47358","price":13.32,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337620074876,"sku":"47358","price":13.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Febi_47358_Suspension_Strut_Support_Mount_1.jpg?v=1770597756"},{"product_id":"corteco-80001691-repair-kit-suspension-strut-support-mount","title":"Corteco 80001691 Top Strut Mount","description":"\u003cp\u003eThe Corteco 80001691 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records with ball bearing and paired reference 80001692. It is listed in the repair Kit, suspension strut support mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epaired article number :\u003c\/td\u003e\n\u003ctd\u003e80001692\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CORTECO","offers":[{"title":"1","offer_id":56337620435324,"sku":"80001691","price":41.32,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Corteco_80001691_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597766"},{"product_id":"blue-print-adg080506-repair-kit-suspension-strut-support-mount","title":"Blue Print ADG080506 Repair Kit, suspension strut support mount","description":"\u003cp\u003eThe Blue Print ADG080506 Repair Kit, suspension strut support mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records rubber\/Metal construction, front axle fitting position, and with ball bearing. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BLUE PRINT","offers":[{"title":"1","offer_id":56337620795772,"sku":"ADG080506","price":50.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Blue_Print_ADG080506_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597774"},{"product_id":"blue-print-adh28089c-suspension-strut-support-mount","title":"Blue Print ADH28089C Suspension Strut Support Mount","description":"\u003cp\u003eThe Blue Print ADH28089C Suspension Strut Support Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records rubber\/Metal construction, rear axle fitting position, and without ball bearing. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewithout ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BLUE PRINT","offers":[{"title":"1","offer_id":56337621090684,"sku":"ADH28089C","price":84.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Blue_Print_ADH28089C_Suspension_Strut_Support_Mount_1.jpg?v=1770597784"},{"product_id":"blue-print-adt380221-repair-kit-suspension-strut-support-mount","title":"Blue Print ADT380221 Top Strut Mount","description":"\u003cp\u003eThe Blue Print ADT380221 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records rubber\/Metal construction, front axle fitting position, and with ball bearing. It is listed in the repair Kit, suspension strut support mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRepair Kit, suspension strut support mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eRubber\/Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BLUE PRINT","offers":[{"title":"1","offer_id":56337621385596,"sku":"ADT380221","price":49.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Blue_Print_ADT380221_Repair_Kit_suspension_strut_support_mount_1.jpg?v=1770597791"},{"product_id":"apec-akm1001-suspension-strut-support-mount","title":"Apec AKM1001 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1001 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position, for vehicles without bad road version and for vehicles without sports suspension suspension, and 3 number of doors. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without bad road version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without sports suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Doors :\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337621811580,"sku":"AKM1001","price":18.1,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337621877116,"sku":"AKM1001","price":18.1,"currency_code":"GBP","in_stock":true},{"title":"3","offer_id":56337621909884,"sku":"AKM1001","price":18.1,"currency_code":"GBP","in_stock":true},{"title":"4","offer_id":56337621942652,"sku":"AKM1001","price":18.1,"currency_code":"GBP","in_stock":true},{"title":"5","offer_id":56337621975420,"sku":"AKM1001","price":18.1,"currency_code":"GBP","in_stock":true},{"title":"6","offer_id":56337622040956,"sku":"AKM1001","price":18.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1001_Suspension_Strut_Support_Mount_1.jpg?v=1770597811"},{"product_id":"apec-akm1002-suspension-strut-support-mount","title":"Apec AKM1002 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1002 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position, for vehicles without electronic suspension control suspension, and Russia not for country specific design. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without electronic suspension control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003enot for country specific design :\u003c\/td\u003e\n\u003ctd\u003eRussia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337622598012,"sku":"AKM1002","price":17.06,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337622630780,"sku":"AKM1002","price":17.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1002_Suspension_Strut_Support_Mount_1.jpg?v=1770597825"},{"product_id":"apec-akm1003-suspension-strut-support-mount","title":"Apec AKM1003 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1003 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with standard suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with sports suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with heavy duty suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337622958460,"sku":"AKM1003","price":12.33,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337623023996,"sku":"AKM1003","price":12.33,"currency_code":"GBP","in_stock":true},{"title":"3","offer_id":56337623056764,"sku":"AKM1003","price":12.33,"currency_code":"GBP","in_stock":true},{"title":"4","offer_id":56337623155068,"sku":"AKM1003","price":12.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1003_Suspension_Strut_Support_Mount_1.jpg?v=1770597840"},{"product_id":"apec-akm1004-suspension-strut-support-mount","title":"Apec AKM1004 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1004 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337623548284,"sku":"AKM1004","price":34.8,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337623581052,"sku":"AKM1004","price":34.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1004_Suspension_Strut_Support_Mount_1.jpg?v=1770597852"},{"product_id":"apec-akm1005-suspension-strut-support-mount","title":"Apec AKM1005 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1005 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337623974268,"sku":"AKM1005","price":15.09,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337624007036,"sku":"AKM1005","price":15.09,"currency_code":"GBP","in_stock":true},{"title":"3","offer_id":56337624105340,"sku":"AKM1005","price":15.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1005_Suspension_Strut_Support_Mount_1.jpg?v=1770597865"},{"product_id":"apec-akm1007-suspension-strut-support-mount","title":"Apec AKM1007 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1007 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position and for vehicles without bad road version suspension. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e08.2004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without bad road version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337624465788,"sku":"AKM1007","price":27.28,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1007_Suspension_Strut_Support_Mount_1.jpg?v=1770597874"},{"product_id":"apec-akm1008-suspension-strut-support-mount","title":"Apec AKM1008 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1008 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337624760700,"sku":"AKM1008","price":24.46,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1008_Suspension_Strut_Support_Mount_1.jpg?v=1770597884"},{"product_id":"apec-akm1009-suspension-strut-support-mount","title":"Apec AKM1009 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1009 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle left fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337625121148,"sku":"AKM1009","price":20.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1009_Suspension_Strut_Support_Mount_1.jpg?v=1770597896"},{"product_id":"apec-akm1010-suspension-strut-support-mount","title":"Apec AKM1010 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1010 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position and for vehicles without bad road version and for vehicles without sports suspension suspension. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without bad road version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without sports suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337625547132,"sku":"AKM1010","price":21.17,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337625612668,"sku":"AKM1010","price":21.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1010_Suspension_Strut_Support_Mount_1.jpg?v=1770597908"},{"product_id":"apec-akm1011-suspension-strut-support-mount","title":"Apec AKM1011 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1011 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle right fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337625940348,"sku":"AKM1011","price":20.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1011_Suspension_Strut_Support_Mount_1.jpg?v=1770597920"},{"product_id":"apec-akm1012-suspension-strut-support-mount","title":"Apec AKM1012 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1012 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records Rolling Bearing bearing type and front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Type :\u003c\/td\u003e\n\u003ctd\u003eRolling Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337626399100,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337626431868,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"3","offer_id":56337626497404,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"4","offer_id":56337626530172,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"5","offer_id":56337626595708,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"6","offer_id":56337626628476,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"7","offer_id":56337626726780,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"8","offer_id":56337626759548,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"9","offer_id":56337626792316,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"10","offer_id":56337626825084,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"11","offer_id":56337626890620,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true},{"title":"12","offer_id":56337626923388,"sku":"AKM1012","price":14.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1012_Suspension_Strut_Support_Mount_1.jpg?v=1770597954"},{"product_id":"apec-akm1014-suspension-strut-support-mount","title":"Apec AKM1014 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1014 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337627578748,"sku":"AKM1014","price":27.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1014_Suspension_Strut_Support_Mount_1.jpg?v=1770597963"},{"product_id":"apec-akm1017-suspension-strut-support-mount","title":"Apec AKM1017 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1017 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337627873660,"sku":"AKM1017","price":26.85,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337627906428,"sku":"AKM1017","price":26.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1017_Suspension_Strut_Support_Mount_1.jpg?v=1770597972"},{"product_id":"apec-akm1018-suspension-strut-support-mount","title":"Apec AKM1018 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1018 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337628332412,"sku":"AKM1018","price":44.45,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337628365180,"sku":"AKM1018","price":44.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1018_Suspension_Strut_Support_Mount_1.jpg?v=1770597983"},{"product_id":"apec-akm1020-suspension-strut-support-mount","title":"Apec AKM1020 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1020 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position and for vehicles without M technology and for vehicles without sports suspension suspension. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e09.2004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without M technology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without sports suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337628660092,"sku":"AKM1020","price":22.79,"currency_code":"GBP","in_stock":false},{"title":"2","offer_id":56337628725628,"sku":"AKM1020","price":22.79,"currency_code":"GBP","in_stock":false},{"title":"3","offer_id":56337628758396,"sku":"AKM1020","price":22.79,"currency_code":"GBP","in_stock":false},{"title":"4","offer_id":56337628823932,"sku":"AKM1020","price":22.79,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1020_Suspension_Strut_Support_Mount_1.jpg?v=1770597997"},{"product_id":"apec-akm1021-suspension-strut-support-mount","title":"Apec AKM1021 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1021 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337629249916,"sku":"AKM1021","price":25.39,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337629315452,"sku":"AKM1021","price":25.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1021_Suspension_Strut_Support_Mount_1.jpg?v=1770598007"},{"product_id":"apec-akm1022-suspension-strut-support-mount","title":"Apec AKM1022 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1022 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position and for vehicles without level control vehicle equipment. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e04.2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without level control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337629643132,"sku":"AKM1022","price":12.28,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337629708668,"sku":"AKM1022","price":12.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1022_Suspension_Strut_Support_Mount_1.jpg?v=1770598018"},{"product_id":"apec-akm1023-suspension-strut-support-mount","title":"Apec AKM1023 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1023 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337630101884,"sku":"AKM1023","price":22.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1023_Suspension_Strut_Support_Mount_1.jpg?v=1770598029"},{"product_id":"apec-akm1024-suspension-strut-support-mount","title":"Apec AKM1024 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1024 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efor OE number :\u003c\/td\u003e\n\u003ctd\u003e90538936\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e03.2004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without electronic suspension control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with standard suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuspension :\u003c\/td\u003e\n\u003ctd\u003efor vehicles without sports suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337630396796,"sku":"AKM1024","price":21.85,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337630429564,"sku":"AKM1024","price":21.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1024_Suspension_Strut_Support_Mount_1.jpg?v=1770598039"},{"product_id":"apec-akm1025-suspension-strut-support-mount","title":"Apec AKM1025 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1025 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337630822780,"sku":"AKM1025","price":24.28,"currency_code":"GBP","in_stock":false},{"title":"2","offer_id":56337630855548,"sku":"AKM1025","price":24.28,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1025_Suspension_Strut_Support_Mount_1.jpg?v=1770598051"},{"product_id":"apec-akm1027-suspension-strut-support-mount","title":"Apec AKM1027 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1027 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337631445372,"sku":"AKM1027","price":35.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1027_Suspension_Strut_Support_Mount_1.jpg?v=1770598069"},{"product_id":"apec-akm1028-suspension-strut-support-mount","title":"Apec AKM1028 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1028 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records rear axle left and rear axle right fitting position. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle Left\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRear Axle Right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337631740284,"sku":"AKM1028","price":17.91,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337631805820,"sku":"AKM1028","price":17.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1028_Suspension_Strut_Support_Mount_1.jpg?v=1770598079"},{"product_id":"apec-akm1029-suspension-strut-support-mount","title":"Apec AKM1029 Top Strut Mount","description":"\u003cp\u003eThe Apec AKM1029 Top Strut Mount is a replacement powertrain or chassis mounting component that locates the supported assembly while controlling movement and isolating vibration where designed. Its catalogue specification records front axle fitting position, for vehicles with power steering vehicle equipment, and 800 kg payload. It is listed in the suspension Strut Support Mount product category. Match the reference, material or mount design, fitting position, supplied fixings and vehicle application before fitting; support the relevant assembly safely during replacement.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eSuspension Strut Support Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Equipment :\u003c\/td\u003e\n\u003ctd\u003efor vehicles with power steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePayload [kg] :\u003c\/td\u003e\n\u003ctd\u003e800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56337632133500,"sku":"AKM1029","price":20.86,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56337632199036,"sku":"AKM1029","price":20.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_AKM1029_Suspension_Strut_Support_Mount_1.jpg?v=1770598092"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/collections\/strut_top_mount_and_bearing.png?v=1770978283","url":"https:\/\/automotopart.co.uk\/collections\/p_top-strut-mount-bearing.oembed?page=44","provider":"AutoMotoPart","version":"1.0","type":"link"}