{"title":"Socket Accessories","description":"\n\u003cp\u003eSocket accessories extend, redirect, adapt or retain a socket-drive system. They include extension bars, universal joints, wobble extensions, sliding T-handles, adaptors, reducers, bit holders, flexible extensions and retaining pins or rings. Each adds access but also changes leverage, alignment and load. Select the simplest arrangement that reaches the fastener while keeping the drive as straight and short as practical.\u003c\/p\u003e\n\u003cp\u003eMatch the square-drive size, socket retention, torque demand and tool type. Hand-tool accessories are not automatically suitable for impact use; impact-rated pieces use appropriate materials, wall sections and retaining systems. Check maximum torque or operating rating, overall and working length, male\/female drive, angular range and whether the accessory is approved for a torque wrench, power tool or insulated system.\u003c\/p\u003e\n\u003cp\u003eInspect before every use. Rounded square drives, twisted shafts, cracks, mushrooming, worn detent balls and missing impact pins can release a socket under load. A universal joint that binds at angle creates uneven rotation, while stacked reducers increase play and stress. Remove damaged pieces from service rather than grinding, welding or using tape to retain a loose socket.\u003c\/p\u003e\n\u003cp\u003eWear eye protection and keep a balanced stance. Seat accessories fully and support long assemblies with both hands where safe. Never hold a powered rotating extension, exceed the fastener or tool limit, or use a flexible extension as a breaker bar. Keep hands clear of pinch points around universal joints and sliding handles. Use impact pins and O-rings exactly where the system requires them.\u003c\/p\u003e\n\u003cp\u003eFor controlled tightening, understand that a straight in-line extension normally does not change a torque wrench's effective lever length, while an offset adaptor or crowfoot can. Calculate and orient it by the wrench manufacturer's method. Apply final torque with the minimum required joints, then inspect the fastener and accessory. Clean, dry and lightly protect unplated steel as specified, storing sizes separately so an undersized adaptor is not selected by mistake.\u003c\/p\u003e","products":[{"product_id":"maypole-76312-12-extension-socket-19mm","title":"Extension Socket - 12in. - 19mm","description":"\u003cul\u003e\n\u003cli\u003eSocket suits 10mm drill chucks\u003c\/li\u003e\n\u003cli\u003e19mm extended socket for caravan leg winding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.277\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIgnition Cable\u003c\/th\u003e\n\u003ctd\u003eConnector Type SAE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIgnition Coil\u003c\/th\u003e\n\u003ctd\u003eConnector Type DIN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable Length [mm]\u003c\/th\u003e\n\u003ctd\u003e245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003efor pipe diameter [mm]\u003c\/th\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet weight [kg]\u003c\/th\u003e\n\u003ctd\u003e0.382\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOEM Numbers\u003c\/th\u003e\n\u003ctd\u003e22440-2J210, 22440-57Y10, 22440-73C10, 22440-86J10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nWhen winding in or out the legs on your caravan you may find that your standard socket is just not long enough for the job. To make life easier Maypole supply a range of extension sockets perfect for the job.\u003cp\u003eThis extension socket give you a 12 inch extension and is suitable for use with 10mm drill chucks. The socket itself is a 19mm socket, made forma strong and durable steel.\u003c\/p\u003e\u003cp\u003eEstablished in 1969, Birmingham based company Maypole has a long heritage in the manufacture and marketing of products to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.\u003c\/p\u003e","brand":"MAYPOLE","offers":[{"title":"1","offer_id":56340906639740,"sku":"76312","price":9.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/76312.jpg?v=1771527595"},{"product_id":"maypole-76320-20-extension-socket-19mm","title":"20in. Extension Socket 19mm","description":"\u003cul\u003e\n\u003cli\u003eSocket suits 10mm drill chucks\u003c\/li\u003e\n\u003cli\u003e19mm extended socket for caravan leg winding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e505\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.418\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIgnition Cable\u003c\/th\u003e\n\u003ctd\u003eConnector Type SAE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIgnition Coil\u003c\/th\u003e\n\u003ctd\u003eConnector Type DIN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eWire Wound Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable Length [mm]\u003c\/th\u003e\n\u003ctd\u003e670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003efor pipe diameter [mm]\u003c\/th\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet weight [kg]\u003c\/th\u003e\n\u003ctd\u003e0.414\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOEM Numbers\u003c\/th\u003e\n\u003ctd\u003e7733566\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nCaravans \u0026amp; other vehicles can require you to change wheels, or tighten a nut. This is where Maypole has created a product especially designed to use in difficult positions and places.\u003cp\u003eThe Maypole Caravan Leg Winding Brace Extended Socket  Is a 50cm extension Ideal For Winding Caravan Steadies Or Standard 19mm Car Wheel Nuts Where Easy To Access (Not Where Sunken In Alloy Wheels). \u003c\/p\u003e\u003cp\u003eMaypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products.  Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrapper, Maypole has tried to cater for the Travel and leisure markets in the UK.\u003c\/p\u003e","brand":"MAYPOLE","offers":[{"title":"1","offer_id":56340906803580,"sku":"76320","price":10.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/76320.jpg?v=1771527597"},{"product_id":"milwaukee-4932471656-3-4dr-impact-extension-250mm-long","title":"Socket Extension ShW 3\/4 250mm-1pc","description":"\u003cp\u003eThe Socket Extension ShW 3\/4 250mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932471656 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImpact rated socket extensions for facilitated bolt access in restricted areas.\u003c\/li\u003e\n\u003cli\u003eSHOCKWAVE IMPACT DUTY steel (chrome-molybdenum) is high quality alloy steel which provides ultimate strength and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.174\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nSocket Extension ShW 3\/4 250mm-1pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341188477308,"sku":"4932471656","price":99.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932471656.jpg?v=1771523222"},{"product_id":"milwaukee-4932479824-1-4dr-socket-set-foam-insert","title":"1\/4 DR Ratchet and Socket Set Foam Insert","description":"\u003cp\u003eThe 1\/4 DR Ratchet and Socket Set Foam Insert is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932479824 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll metal design for maximum durabilty.\u003c\/li\u003e\n\u003cli\u003eFOUR FLAT sides on socket deter rolling.\u003c\/li\u003e\n\u003cli\u003e90 tooth design with 4Dg of arc swing for tight work spaces.\u003c\/li\u003e\n\u003cli\u003e76 mm extension, 152 mm extension, universal joint\u003c\/li\u003e\n\u003cli\u003eDeep well sockets: 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm\u003c\/li\u003e\n\u003cli\u003eStandard sockets: 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e483\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e444\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/4 DR Ratchet and Socket Set Foam Insert","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341203190140,"sku":"4932479824","price":104.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932479824.jpg?v=1771523427"},{"product_id":"milwaukee-4932479825-3-8dr-socket-set-foam-insert","title":"3\/8 DR Ratchet and Socket Set Foam Insert","description":"\u003cp\u003eThe 3\/8 DR Ratchet and Socket Set Foam Insert is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932479825 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll metal design for maximum durabilty.\u003c\/li\u003e\n\u003cli\u003eFOUR FLAT sides on socket deter rolling.\u003c\/li\u003e\n\u003cli\u003e90 tooth design with 4Dg of arc swing for tight work spaces.\u003c\/li\u003e\n\u003cli\u003e76 mm extension, 152 mm extension \/ Universal joint\u003c\/li\u003e\n\u003cli\u003eDeep well sockets: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm\u003c\/li\u003e\n\u003cli\u003eStandard sockets: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e456\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3\/8 DR Ratchet and Socket Set Foam Insert","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341204140412,"sku":"4932479825","price":138.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932479825.jpg?v=1771523428"},{"product_id":"milwaukee-4932479826-1-2dr-socket-set-foam-insert","title":"1\/2 DR Ratchet and Socket Set Foam Insert","description":"\u003cp\u003eThe 1\/2 DR Ratchet and Socket Set Foam Insert is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932479826 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll metal design for maximum durabilty.\u003c\/li\u003e\n\u003cli\u003eFOUR FLAT sides on socket deter rolling.\u003c\/li\u003e\n\u003cli\u003e90 tooth design with 4Dg of arc swing for tight work spaces.\u003c\/li\u003e\n\u003cli\u003e76 mm extension, 127 mm extension\u003c\/li\u003e\n\u003cli\u003eDeep well sockets: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm\u003c\/li\u003e\n\u003cli\u003eStandard sockets: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e76\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e541\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.569\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2 DR Ratchet and Socket Set Foam Insert","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341205352828,"sku":"4932479826","price":192.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932479826.jpg?v=1771523429"},{"product_id":"milwaukee-4932480950-44mm-1-impact-socket-std-1pc-new","title":"Hex socket ShW 1in STD 44mm-1pc","description":"\u003cp\u003eThe Hex socket ShW 1in STD 44mm-1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932480950 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBest fitting thanks to 6 gripping points.\u003c\/li\u003e\n\u003cli\u003eSHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.\u003c\/li\u003e\n\u003cli\u003eDual hole design and groove for security accessories.\u003c\/li\u003e\n\u003cli\u003eStamped and ink filled diameter markings and laser etched part number for wear resistance.\u003c\/li\u003e\n\u003cli\u003eNon-slip hex geometry to prevent socket and fastener rounding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.855\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHex socket ShW 1in STD 44mm-1pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341296185724,"sku":"4932480950","price":82.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932480950.jpg?v=1771523897"},{"product_id":"milwaukee-4932498750-3-4in-socket-set-deep-5pcs","title":"3\/4IN Socket Set Deep-5PCS","description":"\u003cp\u003eThe 3\/4IN Socket Set Deep-5PCS is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932498750 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e268\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e287\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.669\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341303263612,"sku":"4932498750","price":129.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932498750.jpg?v=1771524118"},{"product_id":"milwaukee-4932498751-1in-socket-set-std-5pcs","title":"1IN Socket Set Std-5PCS","description":"\u003cp\u003eThe 1IN Socket Set Std-5PCS is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932498751 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.075\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341303689596,"sku":"4932498751","price":126.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932498751.jpg?v=1771524120"},{"product_id":"carlyle-hand-tools-bsh3812m-12pc-3-8dr-hex-metric-socket-set","title":"Socket Set - Hex Bit Metric","description":"\u003cp\u003eThe Socket Set - Hex Bit Metric is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Various size. Use Carlyle hand tools reference BSH3812M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMirror polished Chrome plated finish\u003c\/li\u003e\n\u003cli\u003eHex Bit Metric Socket Set\u003c\/li\u003e\n\u003cli\u003ePrecision designed hex tips ensure accurate fastener fit\u003c\/li\u003e\n\u003cli\u003eIncludes colour coded rail for convenient storage and identification\u003c\/li\u003e\n\u003cli\u003e2.5, 2 - 12 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e329\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e192\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341313487228,"sku":"BSH3812M","price":14.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/BSH3812M.jpg?v=1771535295"},{"product_id":"carlyle-hand-tools-bsth13-13-pc-tamper-proof-bit-socket-set","title":"Socket Set - Star Bit Metric - Tamper Proof","description":"\u003cp\u003eThe Socket Set - Star Bit Metric - Tamper Proof is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Various size. Use Carlyle hand tools reference BSTH13 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision designed tamper proof star tips ensure accurate fastener fit\u003c\/li\u003e\n\u003cli\u003eIncludes color coded rail for convenient storage and identification\u003c\/li\u003e\n\u003cli\u003eT7H, T8H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H, T55H \u0026amp; T60H\u003c\/li\u003e\n\u003cli\u003eMirror polished Chrome plated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e262\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.5353\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341313716604,"sku":"BSTH13","price":10.12,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/BSTH13.jpg?v=1771535327"},{"product_id":"carlyle-hand-tools-bstp12-12-pc-star-plus-bit-socket-set","title":"Socket Set - Star Plus - Metric","description":"\u003cp\u003eThe Socket Set - Star Plus - Metric is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Various size. Use Carlyle hand tools reference BSTP12 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision designed star plus tips ensure accurate fastener fit\u003c\/li\u003e\n\u003cli\u003eIncludes color coded rail for convenient storage and identification\u003c\/li\u003e\n\u003cli\u003eTP8, TP10, TP15, TP20, TP25, TP27, TP30, TP40, TP45, TP50, TP55 \u0026amp; TP60\u003c\/li\u003e\n\u003cli\u003eMirror polished Chrome plated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e262\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e74\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.5353\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341313945980,"sku":"BSTP12","price":14.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/BSTP12.jpg?v=1771535329"},{"product_id":"carlyle-hand-tools-bsts3808-8pc-3-8dr-multispline-bit-sckt-set","title":"Socket Set - Triple Square - Metric","description":"\u003cp\u003eThe Socket Set - Triple Square - Metric is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Various size. Use Carlyle hand tools reference BSTS3808 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision designed triple square tips ensure accurate fastener fit\u003c\/li\u003e\n\u003cli\u003eIncludes color coded rail for convenient storage and identification\u003c\/li\u003e\n\u003cli\u003e4 - 6, 8, 10, 12, 14, 16 mm\u003c\/li\u003e\n\u003cli\u003eMirror polished Chrome plated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e256\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e9.98\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341314011516,"sku":"BSTS3808","price":12.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/BSTS3808.jpg?v=1771535330"},{"product_id":"carlyle-hand-tools-bsttp11-11-pc-tamper-proof-5-star-plus-bit-socket-set","title":"Socket Set - 5 Star Metric - Tamper Proof","description":"\u003cp\u003eThe Socket Set - 5 Star Metric - Tamper Proof is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Various size. Use Carlyle hand tools reference BSTTP11 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision designed tamper proof 5 star tips ensure eccurate fastener fit\u003c\/li\u003e\n\u003cli\u003eIncludes color coded rail for convenient storage and identification\u003c\/li\u003e\n\u003cli\u003eTS8H, TS10H, TS15H, TS20H, TS25H, TS27H, TS30H, TS40H, TS45H, TS50H \u0026amp; TS55H\u003c\/li\u003e\n\u003cli\u003eMirror polished Chrome plated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e282\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e273\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e9.98\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341314142588,"sku":"BSTTP11","price":14.46,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/BSTTP11.jpg?v=1771535331"},{"product_id":"carlyle-hand-tools-ciadp01015-1dr-f-x-1-2dr-m-impact-adapter","title":"1in F x 1-1\/2in M Impact Socket Adapter","description":"\u003cp\u003eThe 1in F x 1-1\/2in M Impact Socket Adapter is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Molybdenum Alloy Steel technical info. Use Carlyle hand tools reference CIADP01015 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e98\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.735\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341325054332,"sku":"CIADP01015","price":23.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CIADP01015.jpg?v=1771536333"},{"product_id":"carlyle-hand-tools-cbset11-11pc-external-star-socket-set","title":"11PC External E Torx Star Socket Set","description":"\u003cp\u003eThe 11PC External E Torx Star Socket Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Vanadium Alloy Steel technical info. Use Carlyle hand tools reference CBSET11 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e277\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e238\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e10.115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n11PC EXTERNAL STAR SOCKET SET E4 TO E20","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341649097084,"sku":"CBSET11","price":18.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBSET11.jpg?v=1771535849"},{"product_id":"carlyle-hand-tools-cbsh1210m-10pc-1-2dr-metric-hex-socket-set","title":"10PC 1\/2DR Metric Hex Socket Set","description":"\u003cp\u003eThe 10PC 1\/2DR Metric Hex Socket Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CBSH1210M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eS2 Steel Bit provides longer life and performance\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e323\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e219\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e253\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e22.453\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n10PC 1\/2DR METRIC HEX SOCKET SET 6MM TO 19MM","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341649391996,"sku":"CBSH1210M","price":38.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBSH1210M.jpg?v=1771535851"},{"product_id":"carlyle-hand-tools-cbsh3812m-12pc-3-8dr-hex-metric-socket-set","title":"12PC 3\/8DR Hex Metric Socket Set","description":"\u003cp\u003eThe 12PC 3\/8DR Hex Metric Socket Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CBSH3812M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eS2 Steel Bit provides longer life and performance\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e198\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n12PC 3\/8DR HEX METRIC SOCKET SET 2MM TO 12MM","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341649555836,"sku":"CBSH3812M","price":25.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBSH3812M.jpg?v=1771535852"},{"product_id":"carlyle-hand-tools-cbslt12-12-pc-long-star-bit-socket-set","title":"12 Pc Long Torx Bit Socket Set","description":"\u003cp\u003eThe 12 Pc Long Torx Bit Socket Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CBSLT12 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eS2 Steel Bit provides longer life and performance\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e352\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.119\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n12 PC LONG STAR BIT SOCKET SET T8 TO T60","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341650145660,"sku":"CBSLT12","price":33.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBSLT12.jpg?v=1771535854"},{"product_id":"carlyle-hand-tools-cbsodp14-14-pc-oil-drain-plug-socket-set","title":"14 Pc Oil Drain Plug Socket Set","description":"\u003cp\u003eThe 14 Pc Oil Drain Plug Socket Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Vanadium Alloy Steel technical info. Use Carlyle hand tools reference CBSODP14 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003e8mm Hex BMW, Ford, 9mm Hex Vauxhall, 10mm Ford, 12mm Merc, Fiat, 17mm Hex VAG, 5\/16in. \u0026amp; 3\/8in. Mazda, Renault, Saab, Volvo, 7mm \u0026amp; 8mm square PSA, 11mm Square Ford 13mm Square Nissan \u0026amp; Subaru. Female Square 10mm BMW , Volvo, Ford 10mm Triangle Renault.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e145\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n14 PC OIL DRAIN PLUG SOCKET SET 8MM TO 10MM","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341650604412,"sku":"CBSODP14","price":32.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBSODP14.jpg?v=1771535857"},{"product_id":"carlyle-hand-tools-cbst13-13pc-star-bit-socket-set","title":"13PC Torx Bit Socket Set","description":"\u003cp\u003eThe 13PC Torx Bit Socket Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CBST13 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eS2 Steel Bit provides longer life and performance\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e151\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e14.696\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n13PC  STAR BIT SOCKET SET T8 TO T60","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341650768252,"sku":"CBST13","price":25.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBST13.jpg?v=1771535859"},{"product_id":"carlyle-hand-tools-cbsth13-13-pc-tamper-proof-bit-socket-set","title":"13 Pc Mult Drive Tamper Torx Proof Bit Socket Set","description":"\u003cp\u003eThe 13 Pc Mult Drive Tamper Torx Proof Bit Socket Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CBSTH13 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eS2 Steel Bit provides longer life and performance\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e145\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e13.472\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n13 PC TAMPER PROOF BIT SOCKET SET T7H TO T55H","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341650997628,"sku":"CBSTH13","price":25.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBSTH13.jpg?v=1771535861"},{"product_id":"carlyle-hand-tools-cbstp12-12-pc-star-plus-bit-socket-set","title":"12 Pc Star Plus Bit Socket Set","description":"\u003cp\u003eThe 12 Pc Star Plus Bit Socket Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CBSTP12 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eS2 Steel Bit provides longer life and performance\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e145\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e13.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n12 PC STAR PLUS BIT SOCKET SET TP8 TO TP55","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341651915132,"sku":"CBSTP12","price":23.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBSTP12.jpg?v=1771535864"},{"product_id":"carlyle-hand-tools-cis12t30-1-2dr-t30-internal-star-impact-sckt","title":"1\/2in Drive T30 Star Impact Socket","description":"\u003cp\u003eThe 1\/2in Drive T30 Star Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CIS12T30 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2in Drive T30 Star Impact Socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341652406652,"sku":"CIS12T30","price":9.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CIS12T30.jpg?v=1771536435"},{"product_id":"carlyle-hand-tools-cis12t40-1-2dr-t40-internal-star-impact-sckt","title":"1\/2in Drive T40 Star Impact Socket","description":"\u003cp\u003eThe 1\/2in Drive T40 Star Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CIS12T40 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.357\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2in Drive T40 Star Impact Socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341652636028,"sku":"CIS12T40","price":9.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CIS12T40.jpg?v=1771536436"},{"product_id":"carlyle-hand-tools-cis12t45-1-2dr-t45-internal-star-impact-sckt","title":"1\/2in Drive T45 Star Impact Socket","description":"\u003cp\u003eThe 1\/2in Drive T45 Star Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CIS12T45 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2in Drive T45 Star Impact Socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341652832636,"sku":"CIS12T45","price":9.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CIS12T45.jpg?v=1771536437"},{"product_id":"carlyle-hand-tools-cis12t47-1-2dr-t47-internal-star-impact-sckt","title":"1\/2 Drive T47 internal star impact socket","description":"\u003cp\u003eThe 1\/2 Drive T47 internal star impact socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records T47 size. Use Carlyle hand tools reference CIS12T47 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eT47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.387\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2 Drive T47 internal star impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341653029244,"sku":"CIS12T47","price":9.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CIS12T47.jpg?v=1771536440"},{"product_id":"carlyle-hand-tools-cis12t50-1-2dr-t50-internal-star-impact-sckt","title":"1\/2DR T50 Internal Star Impact Socket","description":"\u003cp\u003eThe 1\/2DR T50 Internal Star Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Molybdenum Alloy Steel technical info. Use Carlyle hand tools reference CIS12T50 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.397\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2dr t50 internal star impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341653291388,"sku":"CIS12T50","price":9.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CIS12T50.jpg?v=1771536441"},{"product_id":"carlyle-hand-tools-cis12t55-1-2dr-t55-internal-star-impact-sckt","title":"1\/2in Drive T55 Star Impact Socket","description":"\u003cp\u003eThe 1\/2in Drive T55 Star Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CIS12T55 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.451\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2in Drive T55 Star Impact Socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341653520764,"sku":"CIS12T55","price":9.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CIS12T55.jpg?v=1771536443"},{"product_id":"carlyle-hand-tools-cis12t60-1-2dr-t60-internal-star-impact-sckt","title":"1\/2 DriveT60 internal star impact socket","description":"\u003cp\u003eThe 1\/2 DriveT60 internal star impact socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records T60 size. Use Carlyle hand tools reference CIS12T60 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eT60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.956\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2 DriveT60 internal star impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341653684604,"sku":"CIS12T60","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CIS12T60.jpg?v=1771536445"},{"product_id":"carlyle-hand-tools-cis12t70-1-2dr-t70-internal-star-impact-sckt","title":"1\/2in Drive T70 Star Impact Socket","description":"\u003cp\u003eThe 1\/2in Drive T70 Star Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CIS12T70 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.547\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2in Drive T70 Star Impact Socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341653913980,"sku":"CIS12T70","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CIS12T70.jpg?v=1771536446"},{"product_id":"carlyle-hand-tools-cish1206m-1-2dr-6mm-hex-78mm-long-impact-sckt","title":"1\/2DR 6MM Hex 78MM Long Impact Socket","description":"\u003cp\u003eThe 1\/2DR 6MM Hex 78MM Long Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Molybdenum Alloy Steel technical info. Use Carlyle hand tools reference CISH1206M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.798\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2dr 6mm hex 78mm long impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341656011132,"sku":"CISH1206M","price":11.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH1206M.jpg?v=1771536517"},{"product_id":"carlyle-hand-tools-cish1208m-1-2dr-8mm-hex-78mm-long-impact-sckt","title":"1\/2DR 8MM Hex 78MM Long Impact Socket","description":"\u003cp\u003eThe 1\/2DR 8MM Hex 78MM Long Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Molybdenum Alloy Steel technical info. Use Carlyle hand tools reference CISH1208M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.932\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2dr 8mm hex 78mm long impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341656404348,"sku":"CISH1208M","price":11.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH1208M.jpg?v=1771536517"},{"product_id":"carlyle-hand-tools-cish1219m-1-2dr-19mm-hex-78mm-long-impact-skt","title":"1\/2DR 19MM Hex 78MM Long Impact Socket","description":"\u003cp\u003eThe 1\/2DR 19MM Hex 78MM Long Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Molybdenum Alloy Steel technical info. Use Carlyle hand tools reference CISH1219M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.046\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2dr 19mm hex 78mm long impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341657289084,"sku":"CISH1219M","price":12.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH1219M.jpg?v=1771536519"},{"product_id":"carlyle-hand-tools-cish38017m-3-8dr-17mm-hex-impact-socket","title":"3\/8 Drive 17mm Hex Long impact socket","description":"\u003cp\u003eThe 3\/8 Drive 17mm Hex Long impact socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 17mm size. Use Carlyle hand tools reference CISH38017M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e17mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.861\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3\/8 Drive 17mm Hex impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341657485692,"sku":"CISH38017M","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH38017M.jpg?v=1771536521"},{"product_id":"carlyle-hand-tools-cish3804m-3-8dr-4mm-hex-60mm-long-impact-sckt","title":"3\/8DR 4MM Hex 60MM Long Impact Socket","description":"\u003cp\u003eThe 3\/8DR 4MM Hex 60MM Long Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Molybdenum Alloy Steel technical info. Use Carlyle hand tools reference CISH3804M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3\/8dr 4mm hex 60mm long impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341657583996,"sku":"CISH3804M","price":8.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH3804M.jpg?v=1771536521"},{"product_id":"carlyle-hand-tools-cish3805m-3-8dr-5mm-hex-60mm-long-impact-sckt","title":"3\/8DR 5MM Hex 60MM Long Impact Socket","description":"\u003cp\u003eThe 3\/8DR 5MM Hex 60MM Long Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Molybdenum Alloy Steel technical info. Use Carlyle hand tools reference CISH3805M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.392\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3\/8dr 5mm hex 60mm long impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341657846140,"sku":"CISH3805M","price":8.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH3805M.jpg?v=1771536523"},{"product_id":"carlyle-hand-tools-cish3807m-3-8dr-7mm-hex-60mm-long-impact-sckt","title":"3\/8DR 7MM Hex 60MM Long Impact Socket","description":"\u003cp\u003eThe 3\/8DR 7MM Hex 60MM Long Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Molybdenum Alloy Steel technical info. Use Carlyle hand tools reference CISH3807M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.465\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3\/8dr 7mm hex 60mm long impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341658239356,"sku":"CISH3807M","price":8.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH3807M.jpg?v=1771536525"},{"product_id":"carlyle-hand-tools-cish3808m-3-8dr-8mm-hex-60mm-long-impact-sckt","title":"3\/8 Drive 8mm Hex 60mm long impact socket","description":"\u003cp\u003eThe 3\/8 Drive 8mm Hex 60mm long impact socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 8mm size. Use Carlyle hand tools reference CISH3808M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.519\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3\/8 Drive 8mm Hex 60mm long impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341658435964,"sku":"CISH3808M","price":8.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH3808M.jpg?v=1771536526"},{"product_id":"carlyle-hand-tools-cish3810m-3-8dr-10mm-hex-60mm-long-impact-skt","title":"3\/8 Drive 10mm Hex 60mm long impact socket","description":"\u003cp\u003eThe 3\/8 Drive 10mm Hex 60mm long impact socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 10mm size. Use Carlyle hand tools reference CISH3810M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.603\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3\/8 Drive 10mm Hex 60mm long impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341658665340,"sku":"CISH3810M","price":8.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH3810M.jpg?v=1771536528"},{"product_id":"carlyle-hand-tools-cish3812m-3-8dr-12mm-hex-60mm-long-impact-skt","title":"3\/8DR 12MM Hex 60MM Long Impact Socket","description":"\u003cp\u003eThe 3\/8DR 12MM Hex 60MM Long Impact Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Molybdenum Alloy Steel technical info. Use Carlyle hand tools reference CISH3812M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.685\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3\/8dr 12mm hex 60mm long impact socket","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341659025788,"sku":"CISH3812M","price":8.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISH3812M.jpg?v=1771536529"},{"product_id":"carlyle-hand-tools-ciss387hm-7pc-3-8dr-hex-impact-socket-set","title":"7pc 3\/8 Drive Hex impact socket set 4mm to 12mm","description":"\u003cp\u003eThe 7pc 3\/8 Drive Hex impact socket set 4mm to 12mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CISS387HM when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening smooths connection between socket and drive tool\u003c\/li\u003e\n\u003cli\u003eMade from Chrome Molybdenum Alloy Steel for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack phosphate finish resists corrosion\u003c\/li\u003e\n\u003cli\u003eFor use with impact power \/ air tools\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum Alloy Steel\u003c\/li\u003e\n\u003cli\u003ePhosphate Outer Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e133\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e221\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.345\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n7pc 3\/8 Drive Hex impact socket set 4mm to 12mm","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341659582844,"sku":"CISS387HM","price":22.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CISS387HM.jpg?v=1771536541"},{"product_id":"carlyle-hand-tools-cs12e18-1-2dr-e18-e-torx-socket","title":"1\/2DR E18 E Torx Socket","description":"\u003cp\u003eThe 1\/2DR E18 E Torx Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Vanadium Alloy Steel technical info. Use Carlyle hand tools reference CS12E18 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.073\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2DR E18 E TORX SOCKET","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341660008828,"sku":"CS12E18","price":8.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CS12E18.jpg?v=1771537508"},{"product_id":"carlyle-hand-tools-cs12e20-1-2dr-e20-e-torx-socket","title":"1\/2DR E20 E Torx Socket","description":"\u003cp\u003eThe 1\/2DR E20 E Torx Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Vanadium Alloy Steel technical info. Use Carlyle hand tools reference CS12E20 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.074\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2DR E20 E TORX SOCKET","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341660238204,"sku":"CS12E20","price":8.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CS12E20.jpg?v=1771537509"},{"product_id":"carlyle-hand-tools-cs12e22-1-2dr-e22-external-star-socket","title":"1\/2DR E22 External Star Socket","description":"\u003cp\u003eThe 1\/2DR E22 External Star Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Vanadium Alloy Steel technical info. Use Carlyle hand tools reference CS12E22 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.075\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2DR E22 EXTERNAL STAR SOCKET","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341660336508,"sku":"CS12E22","price":8.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CS12E22.jpg?v=1771537511"},{"product_id":"carlyle-hand-tools-cs12e24-1-2dr-e24-external-star-socket","title":"1\/2DR E24 External Star Socket","description":"\u003cp\u003eThe 1\/2DR E24 External Star Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Vanadium Alloy Steel technical info. Use Carlyle hand tools reference CS12E24 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.076\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2DR E24 EXTERNAL STAR SOCKET","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341660467580,"sku":"CS12E24","price":8.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CS12E24.jpg?v=1771537513"},{"product_id":"carlyle-hand-tools-cs12t60-1-2dr-torx-t60-bit-socket","title":"1\/2DR Torx T60 Bit Socket","description":"\u003cp\u003eThe 1\/2DR Torx T60 Bit Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info and T60 size. Use Carlyle hand tools reference CS12T60 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eS2 Steel Bit provides longer life and performance\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eT60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341661221244,"sku":"CS12T60","price":9.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CS12T60.jpg?v=1771537520"},{"product_id":"carlyle-hand-tools-cs12tp60-1-2dr-tp60-ribe-bit-socket","title":"1\/2DR TP60 Ribe Bit Socket","description":"\u003cp\u003eThe 1\/2DR TP60 Ribe Bit Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CS12TP60 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eS2 Steel Bit provides longer life and performance\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2DR TP60 RIBE BIT SOCKET","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341661516156,"sku":"CS12TP60","price":8.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CS12TP60.jpg?v=1771537523"},{"product_id":"carlyle-hand-tools-cs14e4-1-4dr-e4-e-torx-socket","title":"1\/4DR E4 E Torx Socket","description":"\u003cp\u003eThe 1\/4DR E4 E Torx Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Vanadium Alloy Steel technical info and E4 size. Use Carlyle hand tools reference CS14E4 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eE4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341661647228,"sku":"CS14E4","price":7.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CS14E4.jpg?v=1771537536"},{"product_id":"carlyle-hand-tools-cs14e5-1-4dr-e5-e-torx-socket","title":"1\/4DR E5 E Torx Socket","description":"\u003cp\u003eThe 1\/4DR E5 E Torx Socket is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Chrome Vanadium Alloy Steel technical info and E5 size. Use Carlyle hand tools reference CS14E5 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadius corner on working end provides higher torque and better gripping of fastener\u003c\/li\u003e\n\u003cli\u003eChamfered drive opening allows a quicker connection between socket and fastener\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eKnurled teeth on bottom of socket improve grip when handling\u003c\/li\u003e\n\u003cli\u003eChamfered Drive Opening\u003c\/li\u003e\n\u003cli\u003eRadius Corner Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eChrome Vanadium Alloy Steel\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eE5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341661811068,"sku":"CS14E5","price":7.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CS14E5.jpg?v=1771537537"}],"url":"https:\/\/automotopart.co.uk\/collections\/socket-accessories.oembed?page=3","provider":"AutoMotoPart","version":"1.0","type":"link"}