{"title":"VAN LINE","description":"\u003cp\u003eVAN LINE on AutoMotoPart is a workshop-abrasives range. The visible products include spindle-mounted flap wheels, zirconium flap discs, quick-lock discs, fibre and hook-and-loop sanding discs, wet-and-dry paper, cup and scratch brushes, non-woven hand pads and steel wool. Sizes, bores, shaft diameters and grit grades vary across the selection, so the word ‘abrasive’ identifies a broad process rather than one interchangeable consumable.\u003c\/p\u003e\n\u003cp\u003eStart by defining the material and the required stage: cutting, stock removal, weld blending, rust removal, keying, scratch refinement, cleaning or final preparation. Then match product form, diameter, bore or shaft, backing system, grit and maximum operating speed to the tool and workpiece. The current AutoMotoPart selection contains 110 VAN LINE items, led by 110 maintenance entries. These VAN LINE figures describe the range on this page rather than every product the brand may make elsewhere.\u003c\/p\u003e\n\u003cp\u003eA P40 flap disc and P1200 wet-and-dry sheet sit at very different points in a finishing sequence. Coarse products remove material quickly but leave deeper scratches; finer products refine an existing pattern rather than correcting every deep defect efficiently. Wire brushes remove loose scale or contamination but can mark soft material and can contaminate stainless or aluminium when the wrong wire is used. Keep tools and consumables separated where cross-contamination would damage the next coating or promote corrosion.\u003c\/p\u003e\n\u003cp\u003ePowered abrasives can burst, shed wire or eject fragments. Check the product and tool speed markings, guard, flange or backing pad before mounting, and use competent operators with the eye, face, hearing and respiratory protection required by the risk assessment. Secure the work, control sparks and dust, and never use a damaged or unidentifiable wheel. Inspect the scratch pattern and temperature as work proceeds instead of forcing a worn abrasive. Record the grades used before primer, paint or polish, so any persistent scratch pattern can be traced to the correct preparation stage. The products below are a reference-led VAN LINE selection; final suitability depends on the exact title, tool instructions and material being prepared.\u003c\/p\u003e","products":[{"product_id":"van-line-waf628n-flap-wheels-6mm-shaft-60x30mm-p80","title":"ABRACS Flap Wheels 6mm shaft 60x30mm P80","description":"\u003cp\u003eThe ABRACS Flap Wheels 6mm shaft 60x30mm P80 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 60 x 30 mm size. Use Van line reference WAF628N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on mild steel, construction steel, alloy steel and iron\u003c\/li\u003e\n\u003cli\u003eDesigned for use with electric drills and air tools\u003c\/li\u003e\n\u003cli\u003eIdeal for deburring and general cleaning applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for deburring and general cleaning applications. Designed for use with electric drills and air tools. Suitable for use on mild steel, construction steel, alloy steel and iron.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e60 x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Wheels 6mm shaft 60x30mm P80","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338894553468,"sku":"WAF628N","price":22.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF216N_1_a3f23f37-970c-46a3-8d84-3e3e1f3bfeff.jpg?v=1771562664"},{"product_id":"van-line-waf854n-flap-wheels-6mm-shaft-80x50mm-p40","title":"ABRACS Flap Wheels 6mm shaft 80x50mm P40","description":"\u003cp\u003eThe ABRACS Flap Wheels 6mm shaft 80x50mm P40 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 80 x 50 mm size. Use Van line reference WAF854N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on mild steel, construction steel, alloy steel and iron\u003c\/li\u003e\n\u003cli\u003eDesigned for use with electric drills and air tools\u003c\/li\u003e\n\u003cli\u003eIdeal for deburring and general cleaning applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for deburring and general cleaning applications. Designed for use with electric drills and air tools. Suitable for use on mild steel, construction steel, alloy steel and iron.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e80 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e215\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.575\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Wheels 6mm shaft 80x50mm P40","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338895143292,"sku":"WAF854N","price":38.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF216N_1_7c2ef7bd-2c9c-441b-b9bb-f8fcc9b7c401.jpg?v=1771562665"},{"product_id":"van-line-waf858n-flap-wheels-6mm-shaft-80x50mm-p80","title":"ABRACS Flap Wheels 6mm shaft 80x50mm P80","description":"\u003cp\u003eThe ABRACS Flap Wheels 6mm shaft 80x50mm P80 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 80 x 50 mm size. Use Van line reference WAF858N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on mild steel, construction steel, alloy steel and iron\u003c\/li\u003e\n\u003cli\u003eDesigned for use with electric drills and air tools\u003c\/li\u003e\n\u003cli\u003eIdeal for deburring and general cleaning applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for deburring and general cleaning applications. Designed for use with electric drills and air tools. Suitable for use on mild steel, construction steel, alloy steel and iron.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e80 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e215\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.575\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Wheels 6mm shaft 80x50mm P80","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338895503740,"sku":"WAF858N","price":33.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF216N_1_80e92478-8c68-43bc-a7d7-266b6f009b7c.jpg?v=1771562667"},{"product_id":"van-line-wb49-wheel-brush-150-x-20-x-38mm-bore","title":"ABRACS Wheel Brush 150 x 20 x 38mm bore","description":"\u003cp\u003eThe ABRACS Wheel Brush 150 x 20 x 38mm bore is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 150 x 20 x 38mm size. Use Van line reference WB49 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eBore Hole 38 mm\u003c\/li\u003e\n\u003cli\u003eSupplied with bore reducing bushes from 32mm to 13mm\u003c\/li\u003e\n\u003cli\u003eIdeal for metal surface preparation and the removal of rust and scales\u003c\/li\u003e\n\u003cli\u003e0.3 mm crimped steel wire brush suitable for bench grinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003e0.3 mm crimped steel wire brush suitable for bench grinders. Ideal for metal surface preparation and the removal of rust and scales. Supplied with bore reducing bushes from 32mm to 13mm.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e150 x 20 x 38mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.58\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wheel Brush 150 x 20 x 38mm bore","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338899370364,"sku":"WB49","price":20.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB50.jpg?v=1771562982"},{"product_id":"van-line-wqd184-qlock-zirc-flap-discs-p40-50mm-pk25","title":"ABRACS 50mm Quick-Lock Zirc Flap Disc P40","description":"\u003cp\u003eThe ABRACS 50mm Quick-Lock Zirc Flap Disc P40 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WQD184 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003eMax RPM 25,000\u003c\/li\u003e\n\u003cli\u003eShould be used with an Abracs Quick Lock Backing Pad\u003c\/li\u003e\n\u003cli\u003eSuitable for use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eSuitable for use on stainless steel, sheet metal, mild steel and high grade steel. Should be used with an Abracs Quick Lock Backing Pad.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.413\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS 50mm Quick-Lock Zirc Flap Disc P40","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338917851516,"sku":"WQD184","price":47.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WQD184.jpg?v=1771563208"},{"product_id":"van-line-wqd186-qlock-zirc-flap-discs-p60-50mm-pk25","title":"ABRACS 50mm Quick-Lock Zirc Flap Disc P60","description":"\u003cp\u003eThe ABRACS 50mm Quick-Lock Zirc Flap Disc P60 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WQD186 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003eMax RPM 25,000\u003c\/li\u003e\n\u003cli\u003eShould be used with an Abracs Quick Lock Backing Pad\u003c\/li\u003e\n\u003cli\u003eSuitable for use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eSuitable for use on stainless steel, sheet metal, mild steel and high grade steel. Should be used with an Abracs Quick Lock Backing Pad.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.399\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS 50mm Quick-Lock Zirc Flap Disc P60","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338918441340,"sku":"WQD186","price":47.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WQD184_1fdf3c49-7199-4c24-b738-ebf34dc645d2.jpg?v=1771563209"},{"product_id":"van-line-wqd188-qlock-zirc-flap-discs-p80-50mm-pk25","title":"ABRACS 50mm Quick-Lock Zirc Flap Disc P80","description":"\u003cp\u003eThe ABRACS 50mm Quick-Lock Zirc Flap Disc P80 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WQD188 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003eMax RPM 25,000\u003c\/li\u003e\n\u003cli\u003eShould be used with an Abracs Quick Lock Backing Pad\u003c\/li\u003e\n\u003cli\u003eSuitable for use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eSuitable for use on stainless steel, sheet metal, mild steel and high grade steel. Should be used with an Abracs Quick Lock Backing Pad.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.357\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS 50mm Quick-Lock Zirc Flap Disc P80","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338919063932,"sku":"WQD188","price":47.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WQD184_981dd08d-ad6e-4958-9b25-331b96d7b566.jpg?v=1771563211"},{"product_id":"van-line-wsd25-fibre-sand-discs-zirc-115x22mm-p60","title":"ABRACS Fibre Sanding Discs Zirc 115x22mm P60","description":"\u003cp\u003eThe ABRACS Fibre Sanding Discs Zirc 115x22mm P60 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WSD25 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003eMax RPM 13,300\u003c\/li\u003e\n\u003cli\u003eO.D. x Grit 115 mm x P60\u003c\/li\u003e\n\u003cli\u003eTop quality European manufacturing, long life and high performance\u003c\/li\u003e\n\u003cli\u003eFull resin bond system with heavy duty fibre backing for increased strength, durability and tear resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eFull resin bond system with heavy duty fibre backing for increased strength, durability and tear resistance. Top quality European manufacturing, long life and high performance.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Fibre Sanding Discs Zirc 115x22mm P60","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338923651452,"sku":"WSD25","price":23.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WSD3_04043cdc-65b5-4630-b85e-684caf33cb46.jpg?v=1771563229"},{"product_id":"van-line-wsd54n-sanding-discs-hl-6-holes-150mm-p320","title":"ABRACS Sanding Discs H\u0026L 6 Holes 150mm P320","description":"\u003cp\u003eThe ABRACS Sanding Discs H\u0026amp;L 6 Holes 150mm P320 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WSD54N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003eStyle 6 Holes\u003c\/li\u003e\n\u003cli\u003eHeavy duty - should be used with a backing pad\u003c\/li\u003e\n\u003cli\u003eShould be used with a backing pad\u003c\/li\u003e\n\u003cli\u003eSuitable for use on a full range of materials including wood, metal, plastic and fibreglass\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eSuitable for use on a full range of materials including wood, metal, plastic and fibreglass. Should be used with a backing pad.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.271\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Sanding Discs H\u0026amp;L 6 Holes 150mm P320","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338929353084,"sku":"WSD54N","price":18.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WSD54.jpg?v=1771563244"},{"product_id":"van-line-wap6-wet-dry-paper-230x280mm-p1000","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P1000","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P1000 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP6 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e323\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e236\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P1000","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338967101820,"sku":"WAP6","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1_66a1e6d4-86dc-4655-b1a1-81ffc25aab3f.jpg?v=1771562680"},{"product_id":"van-line-wap800-wet-dry-paper-230x280mm-p800","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P800","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P800 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP800 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e323\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e236\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.338\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P800","brand":"VAN LINE","offers":[{"title":"1","offer_id":56338968248700,"sku":"WAP800","price":21.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1_3d6a233e-0084-4d14-8de5-5e0d2bada620.jpg?v=1771562682"},{"product_id":"abracs-flap-disc-zirconium-100x16mm-p40","title":"ABRACS Flap Disc Zirconium 100x16mm P40","description":"\u003cp\u003eThe ABRACS Flap Disc Zirconium 100x16mm P40 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 100 x 16mm size. Use Van line reference WAF104N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eMax RPM 15,300\u003c\/li\u003e\n\u003cli\u003eO.D. x Hole Ø 100 x 16 mm\u003c\/li\u003e\n\u003cli\u003eManufactured to OSA safety standards\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing. For use on stainless steel, sheet metal, mild steel and high grade steel. Manufactured to OSA safety standards.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e100 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Disc Zirconium 100x16mm P40","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674360700,"sku":"WAF104N","price":23.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF104N.jpg?v=1771562646"},{"product_id":"abracs-flap-disc-zirconium-100x16mm-p60","title":"ABRACS Flap Disc Zirconium 100x16mm P60","description":"\u003cp\u003eThe ABRACS Flap Disc Zirconium 100x16mm P60 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 100 x 16 mm size. Use Van line reference WAF106N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eMax RPM 15,300\u003c\/li\u003e\n\u003cli\u003eO.D. x Hole Ø 100 x 16 mm\u003c\/li\u003e\n\u003cli\u003eManufactured to OSA safety standards\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing. For use on stainless steel, sheet metal, mild steel and high grade steel. Manufactured to OSA safety standards.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e100 x 16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.335\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Disc Zirconium 100x16mm P60","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674393468,"sku":"WAF106N","price":24.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF104N_c7a83039-656f-4dd8-a65f-73e83b8fe5d1.jpg?v=1771562648"},{"product_id":"abracs-flap-disc-zirconium-100x16mm-p80","title":"ABRACS Flap Disc Zirconium 100x16mm P80","description":"\u003cp\u003eThe ABRACS Flap Disc Zirconium 100x16mm P80 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 100 x 16 mm size. Use Van line reference WAF108N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eMax RPM 15,300\u003c\/li\u003e\n\u003cli\u003eO.D. x Hole Ø 100 x 16 mm\u003c\/li\u003e\n\u003cli\u003eManufactured to OSA safety standards\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing. For use on stainless steel, sheet metal, mild steel and high grade steel. Manufactured to OSA safety standards.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e100 x 16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Disc Zirconium 100x16mm P80","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674426236,"sku":"WAF108N","price":21.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF104N_fe50663f-2b51-43d0-8ff7-6ac5bf1f4ea7.jpg?v=1771562649"},{"product_id":"abracs-flap-disc-zirconium-115x22mm-p40","title":"ABRACS Flap Disc Zirconium 115x22mm P40","description":"\u003cp\u003eThe ABRACS Flap Disc Zirconium 115x22mm P40 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 115 x 22 mm size. Use Van line reference WAF114N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eMax RPM 13,300\u003c\/li\u003e\n\u003cli\u003eO.D. x Hole Ø 115 x 22 mm\u003c\/li\u003e\n\u003cli\u003eManufactured to OSA safety standards\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing. For use on stainless steel, sheet metal, mild steel and high grade steel. Manufactured to OSA safety standards.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e115 x 22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.436\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Disc Zirconium 115x22mm P40","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674459004,"sku":"WAF114N","price":26.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF104N_db22d9cf-c0bf-4cbf-a2b7-984dbf7c110c.jpg?v=1771562651"},{"product_id":"abracs-flap-disc-zirconium-115x22mm-p60","title":"ABRACS Flap Disc Zirconium 115x22mm P60","description":"\u003cp\u003eThe ABRACS Flap Disc Zirconium 115x22mm P60 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 115 x 22 mm size. Use Van line reference WAF116N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eMax RPM 13,300\u003c\/li\u003e\n\u003cli\u003eO.D. x Hole Ø 115 x 22 mm\u003c\/li\u003e\n\u003cli\u003eManufactured to OSA safety standards\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing. For use on stainless steel, sheet metal, mild steel and high grade steel. Manufactured to OSA safety standards.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e115 x 22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Disc Zirconium 115x22mm P60","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674491772,"sku":"WAF116N","price":26.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF104N_7cca2b9b-0936-46fc-bb0c-c3b28a9872ff.jpg?v=1771562653"},{"product_id":"abracs-flap-disc-zirconium-115x22mm-p80","title":"ABRACS Flap Disc Zirconium 115x22mm P80","description":"\u003cp\u003eThe ABRACS Flap Disc Zirconium 115x22mm P80 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 115 x 22 mm size. Use Van line reference WAF118N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eMax RPM 13,300\u003c\/li\u003e\n\u003cli\u003eO.D. x Hole Ø 115 x 22 mm\u003c\/li\u003e\n\u003cli\u003eManufactured to OSA safety standards\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eEngineered for maximum performance stock removal, blending and finishing. For use on stainless steel, sheet metal, mild steel and high grade steel. Manufactured to OSA safety standards.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e115 x 22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.369\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Disc Zirconium 115x22mm P80","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674524540,"sku":"WAF118N","price":24.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF104N_e3d4a3cf-254a-4fc4-ab9e-51a09fe619b4.jpg?v=1771562655"},{"product_id":"abracs-flap-wheels-6mm-shaft-40x20mm-p40","title":"ABRACS Flap Wheels 6mm shaft 40x20mm P40","description":"\u003cp\u003eThe ABRACS Flap Wheels 6mm shaft 40x20mm P40 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 40 x 20 mm size. Use Van line reference WAF424N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on mild steel, construction steel, alloy steel and iron\u003c\/li\u003e\n\u003cli\u003eDesigned for use with electric drills and air tools\u003c\/li\u003e\n\u003cli\u003eIdeal for deburring and general cleaning applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for deburring and general cleaning applications. Designed for use with electric drills and air tools. Suitable for use on mild steel, construction steel, alloy steel and iron.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e40 x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Wheels 6mm shaft 40x20mm P40","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674557308,"sku":"WAF424N","price":15.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF216N_1.jpg?v=1771562657"},{"product_id":"abracs-flap-wheels-6mm-shaft-40x20mm-p80","title":"ABRACS Flap Wheels 6mm shaft 40x20mm P80","description":"\u003cp\u003eThe ABRACS Flap Wheels 6mm shaft 40x20mm P80 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 40 x 20 mm size. Use Van line reference WAF428N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on mild steel, construction steel, alloy steel and iron\u003c\/li\u003e\n\u003cli\u003eDesigned for use with electric drills and air tools\u003c\/li\u003e\n\u003cli\u003eIdeal for deburring and general cleaning applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for deburring and general cleaning applications. Designed for use with electric drills and air tools. Suitable for use on mild steel, construction steel, alloy steel and iron.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e40 x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Wheels 6mm shaft 40x20mm P80","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674590076,"sku":"WAF428N","price":16.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF216N_1_45e92f2b-b4b9-4aa8-95b9-f2a1f576c84f.jpg?v=1771562659"},{"product_id":"abracs-flap-wheels-6mm-shaft-40x30mm-p40","title":"ABRACS Flap Wheels 6mm shaft 40x30mm P40","description":"\u003cp\u003eThe ABRACS Flap Wheels 6mm shaft 40x30mm P40 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 40 x 30 mm size. Use Van line reference WAF434N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on mild steel, construction steel, alloy steel and iron\u003c\/li\u003e\n\u003cli\u003eDesigned for use with electric drills and air tools\u003c\/li\u003e\n\u003cli\u003eIdeal for deburring and general cleaning applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for deburring and general cleaning applications. Designed for use with electric drills and air tools. Suitable for use on mild steel, construction steel, alloy steel and iron.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e40 x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Wheels 6mm shaft 40x30mm P40","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674622844,"sku":"WAF434N","price":15.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF216N_1_f3964bf7-4b9f-4a18-a300-976b4b301973.jpg?v=1771562661"},{"product_id":"abracs-flap-wheels-6mm-shaft-40x30mm-p80","title":"ABRACS Flap Wheels 6mm shaft 40x30mm P80","description":"\u003cp\u003eThe ABRACS Flap Wheels 6mm shaft 40x30mm P80 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 40 x 30 mm size. Use Van line reference WAF438N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5\u003c\/li\u003e\n\u003cli\u003eSuitable for use on mild steel, construction steel, alloy steel and iron\u003c\/li\u003e\n\u003cli\u003eDesigned for use with electric drills and air tools\u003c\/li\u003e\n\u003cli\u003eIdeal for deburring and general cleaning applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for deburring and general cleaning applications. Designed for use with electric drills and air tools. Suitable for use on mild steel, construction steel, alloy steel and iron.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e40 x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Flap Wheels 6mm shaft 40x30mm P80","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386674655612,"sku":"WAF438N","price":15.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAF216N_1_51f75c45-9b7d-456a-ad97-88ef5d0023ea.jpg?v=1771562663"},{"product_id":"abracs-wet-dry-paper-230x280mm-p600","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P600","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P600 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P600","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675081596,"sku":"WAP1","price":19.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1.jpg?v=1771562668"},{"product_id":"abracs-wet-dry-paper-230x280mm-p120","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P120","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P120 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP120 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.91\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P120","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675114364,"sku":"WAP120","price":20.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1_46f02594-f99e-4fba-bdda-6404337f335f.jpg?v=1771562669"},{"product_id":"abracs-wet-dry-paper-230x280mm-p400","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P400","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P400 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP2 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.314\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P400","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675147132,"sku":"WAP2","price":23.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1_3f7afd9e-84ef-4a0f-b52f-61fd7b563b99.jpg?v=1771562671"},{"product_id":"abracs-wet-dry-paper-230x280mm-p220","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P220","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P220 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP220 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.386\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P220","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675179900,"sku":"WAP220","price":18.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1_aeab29c3-b441-458b-bd31-be8873417aa8.jpg?v=1771562673"},{"product_id":"abracs-wet-dry-paper-230x280mm-p240","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P240","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P240 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP240 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.418\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P240","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675212668,"sku":"WAP240","price":18.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1_7eb8f556-42f5-464f-8da8-21dbef883e9d.jpg?v=1771562675"},{"product_id":"abracs-wet-dry-paper-230x280mm-p320","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P320","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P320 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP3 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.397\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P320","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675245436,"sku":"WAP3","price":18.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1_6d920b05-ae73-417a-aa12-30c195adfccd.jpg?v=1771562676"},{"product_id":"abracs-wet-dry-paper-230x280mm-p180","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P180","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P180 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP4 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.659\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P180","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675278204,"sku":"WAP4","price":18.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1_5dacb2bc-2a46-49bd-8e51-51777e4c38ba.jpg?v=1771562678"},{"product_id":"abracs-wet-dry-paper-230x280mm-p1200","title":"ABRACS Wet \u0026 Dry Paper 230x280mm P1200","description":"\u003cp\u003eThe ABRACS Wet \u0026amp; Dry Paper 230x280mm P1200 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WAP7 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 25\u003c\/li\u003e\n\u003cli\u003e230 x 280 mm\u003c\/li\u003e\n\u003cli\u003eCan be used wet or dry as a durable abrasive for hand finishing\u003c\/li\u003e\n\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eWaterproof paper sheets with flexible anti slip backing paper and resin bonded grit. Can be used wet or dry as a durable abrasive for hand finishing.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.299\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wet \u0026amp; Dry Paper 230x280mm P1200","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675310972,"sku":"WAP7","price":18.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WAP120_1_837513f2-eaef-4ee4-9d8b-4af8d01a6ffd.jpg?v=1771562681"},{"product_id":"abracs-wire-scratch-brushes-wooden-2-row","title":"ABRACS Wire Scratch Brushes Wooden 2-row","description":"\u003cp\u003eThe ABRACS Wire Scratch Brushes Wooden 2-row is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WB10N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 4\u003c\/li\u003e\n\u003cli\u003eType 2 Row\u003c\/li\u003e\n\u003cli\u003eIndustrial quality suitable for a multitude of cleaning applications\u003c\/li\u003e\n\u003cli\u003eHeavy duty wooden handled scratch brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eHeavy duty wooden handled scratch brush. Industrial quality suitable for a multitude of cleaning applications.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.561\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wire Scratch Brushes Wooden 2-row","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675802492,"sku":"WB10N","price":11.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB1N.jpg?v=1771562961"},{"product_id":"abracs-stainless-steel-scratch-brush","title":"ABRACS Stainless Steel Scratch Brush","description":"\u003cp\u003eThe ABRACS Stainless Steel Scratch Brush is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WB131 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 3\u003c\/li\u003e\n\u003cli\u003eWire Type Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHard to reach places can be cleaned with high pressure thanks to the curved shape and narrow face\u003c\/li\u003e\n\u003cli\u003eBrass dipped, stainless steel and nylon hand wire brushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eBrass dipped, stainless steel and nylon hand wire brushes. Hard to reach places can be cleaned with high pressure thanks to the curved shape and narrow face.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.561\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Stainless Steel Scratch Brush","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675835260,"sku":"WB131","price":15.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB131.jpg?v=1771562963"},{"product_id":"abracs-cup-brush-crimped-wire-m10-75mm","title":"ABRACS Cup Brush Crimped Wire M10, 75mm","description":"\u003cp\u003eThe ABRACS Cup Brush Crimped Wire M10, 75mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records M10 size. Use Van line reference WB151 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eWire Ø 0.3 mm\u003c\/li\u003e\n\u003cli\u003eThe high-density crimped wire makes the brushes ideal for polishing, surface preparation and most other cleaning applications\u003c\/li\u003e\n\u003cli\u003eSuitable for angle grinders and other special machinery\u003c\/li\u003e\n\u003cli\u003eBrass dipped crimp steel wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eBrass dipped crimp steel wire. Suitable for angle grinders and other special machinery. The high-density crimped wire makes the brushes ideal for polishing, surface preparation and most other cleaning applications.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.218\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Cup Brush Crimped Wire M10, 75mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675868028,"sku":"WB151","price":12.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB151.jpg?v=1771562964"},{"product_id":"abracs-cup-brush-crimped-wire-m14-75mm","title":"ABRACS Cup Brush Crimped Wire M14, 75mm","description":"\u003cp\u003eThe ABRACS Cup Brush Crimped Wire M14, 75mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records M14 size. Use Van line reference WB152 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eWire Ø 0.3 mm\u003c\/li\u003e\n\u003cli\u003eThe high-density crimped wire makes the brushes ideal for polishing, surface preparation and most other cleaning applications\u003c\/li\u003e\n\u003cli\u003eSuitable for angle grinders and other special machinery\u003c\/li\u003e\n\u003cli\u003eBrass dipped crimp steel wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eBrass dipped crimp steel wire. Suitable for angle grinders and other special machinery. The high-density crimped wire makes the brushes ideal for polishing, surface preparation and most other cleaning applications.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Cup Brush Crimped Wire M14, 75mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675900796,"sku":"WB152","price":14.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB151_4f47c982-a974-4c31-9479-1c9ff0fa68c6.jpg?v=1771562966"},{"product_id":"abracs-cup-brush-crimped-wire-m14-100mm","title":"ABRACS Cup Brush Crimped Wire M14, 100mm","description":"\u003cp\u003eThe ABRACS Cup Brush Crimped Wire M14, 100mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records M14 size. Use Van line reference WB153 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eWire Ø 0.3 mm\u003c\/li\u003e\n\u003cli\u003eThe high-density crimped wire makes the brushes ideal for polishing, surface preparation and most other cleaning applications\u003c\/li\u003e\n\u003cli\u003eSuitable for angle grinders and other special machinery\u003c\/li\u003e\n\u003cli\u003eBrass dipped crimp steel wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eBrass dipped crimp steel wire. Suitable for angle grinders and other special machinery. The high-density crimped wire makes the brushes ideal for polishing, surface preparation and most other cleaning applications.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.428\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Cup Brush Crimped Wire M14, 100mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675933564,"sku":"WB153","price":20.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB151_79b3123e-0967-42d5-8861-70a1d4663246.jpg?v=1771562967"},{"product_id":"abracs-scratch-brush-pack-3pc","title":"ABRACS Scratch Brush Pack 3pc","description":"\u003cp\u003eThe ABRACS Scratch Brush Pack 3pc is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WB205 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1 Set\u003c\/li\u003e\n\u003cli\u003eDescription 3 Piece Set\u003c\/li\u003e\n\u003cli\u003eContents: 1x general purpose scratch brush, 1x nylon scratch brush, 1x stainless steel scratch brush.\u003c\/li\u003e\n\u003cli\u003eHard to reach places can be cleaned with high pressure thanks to the curved shape and narrow face\u003c\/li\u003e\n\u003cli\u003eBrass dipped, stainless steel and nylon hand wire brushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eBrass dipped, stainless steel and nylon hand wire brushes. Hard to reach places can be cleaned with high pressure thanks to the curved shape and narrow face.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.561\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Scratch Brush Pack 3pc","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675966332,"sku":"WB205","price":12.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB205.jpg?v=1771562970"},{"product_id":"abracs-hand-pads-150-x-230mm-grey-fine","title":"ABRACS Hand Pads 150 x 230mm Grey (Fine)","description":"\u003cp\u003eThe ABRACS Hand Pads 150 x 230mm Grey (Fine) is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WB21 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eSize 150 x 230 mm\u003c\/li\u003e\n\u003cli\u003eFlexible construction is ideal for grooves, scratch in channels and other hard to reach areas\u003c\/li\u003e\n\u003cli\u003eIdeal for cleaning a wide range of applications and specially designed to resist loading, prolonging pad life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for cleaning a wide range of applications and specially designed to resist loading, prolonging pad life. Flexible construction is ideal for grooves, scratch in channels and other hard to reach areas.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.378\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Hand Pads 150 x 230mm Grey (Fine)","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386675999100,"sku":"WB21","price":23.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB24.jpg?v=1771562972"},{"product_id":"abracs-hand-pads-150-x-230mm-maroon-medium","title":"ABRACS Hand Pads 150 x 230mm Maroon (Medium)","description":"\u003cp\u003eThe ABRACS Hand Pads 150 x 230mm Maroon (Medium) is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WB22 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eSize 150 x 230 mm\u003c\/li\u003e\n\u003cli\u003eFlexible construction is ideal for grooves, scratch in channels and other hard to reach areas\u003c\/li\u003e\n\u003cli\u003eIdeal for cleaning a wide range of applications and specially designed to resist loading, prolonging pad life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for cleaning a wide range of applications and specially designed to resist loading, prolonging pad life. Flexible construction is ideal for grooves, scratch in channels and other hard to reach areas.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.243\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHand Pads 150 x 230mm Maroon (Medium)","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676064636,"sku":"WB22","price":20.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB24_2a265594-96fe-44f7-838f-80312ea501e6.jpg?v=1771562974"},{"product_id":"abracs-hand-pads-150-x-230mm-green-g-purpose","title":"ABRACS Hand Pads 150 x 230mm Green (G\/Purpose)","description":"\u003cp\u003eThe ABRACS Hand Pads 150 x 230mm Green (G\/Purpose) is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WB23 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eSize 150 x 230 mm\u003c\/li\u003e\n\u003cli\u003eFlexible construction is ideal for grooves, scratch in channels and other hard to reach areas\u003c\/li\u003e\n\u003cli\u003eIdeal for cleaning a wide range of applications and specially designed to resist loading, prolonging pad life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for cleaning a wide range of applications and specially designed to resist loading, prolonging pad life. Flexible construction is ideal for grooves, scratch in channels and other hard to reach areas.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.238\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHand Pads 150 x 230mm Green (G\/Purpose)","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676162940,"sku":"WB23","price":22.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB24_bf79b47b-e345-4c42-83f9-ab037cc58508.jpg?v=1771562976"},{"product_id":"abracs-hand-pads-150-x-230mm-brown-coarse","title":"ABRACS Hand Pads 150 x 230mm Brown (Coarse)","description":"\u003cp\u003eThe ABRACS Hand Pads 150 x 230mm Brown (Coarse) is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WB24 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eSize 150 x 230 mm\u003c\/li\u003e\n\u003cli\u003eFlexible construction is ideal for grooves, scratch in channels and other hard to reach areas\u003c\/li\u003e\n\u003cli\u003eIdeal for cleaning a wide range of applications and specially designed to resist loading, prolonging pad life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for cleaning a wide range of applications and specially designed to resist loading, prolonging pad life. Flexible construction is ideal for grooves, scratch in channels and other hard to reach areas.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Hand Pads 150 x 230mm Brown (Coarse)","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676195708,"sku":"WB24","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB24_baacf715-97a9-4aa9-8c86-143eb33615fa.jpg?v=1771562977"},{"product_id":"abracs-steel-wool-0-45kg-roll-fine","title":"ABRACS Steel Wool 0.45kg Roll Fine","description":"\u003cp\u003eThe ABRACS Steel Wool 0.45kg Roll Fine is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WB26 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eWeight 450 g\u003c\/li\u003e\n\u003cli\u003eMade from selected high grade steel\u003c\/li\u003e\n\u003cli\u003eIndustrial quality steel wool suitable for a variety of surface preparation and finishing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIndustrial quality steel wool suitable for a variety of surface preparation and finishing applications. Made from selected high grade steel.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.464\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Steel Wool 0.45kg Roll Fine","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676228476,"sku":"WB26","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB26.jpg?v=1771562978"},{"product_id":"abracs-steel-wool-0-45kg-roll-medium","title":"ABRACS Steel Wool 0.45kg Roll Medium","description":"\u003cp\u003eThe ABRACS Steel Wool 0.45kg Roll Medium is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WB28 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eWeight 450 g\u003c\/li\u003e\n\u003cli\u003eMade from selected high grade steel\u003c\/li\u003e\n\u003cli\u003eIndustrial quality steel wool suitable for a variety of surface preparation and finishing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIndustrial quality steel wool suitable for a variety of surface preparation and finishing applications. Made from selected high grade steel.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e286\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.463\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Steel Wool 0.45kg Roll Medium","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676261244,"sku":"WB28","price":9.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB26_1c6481db-647c-4ce2-92e6-90c507335722.jpg?v=1771562980"},{"product_id":"abracs-wheel-brush-200-x-25-x-38mm-bore","title":"ABRACS Wheel Brush 200 x 25 x 38mm bore","description":"\u003cp\u003eThe ABRACS Wheel Brush 200 x 25 x 38mm bore is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 200 x 25 x 38mm size. Use Van line reference WB50 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eBore Hole 38 mm\u003c\/li\u003e\n\u003cli\u003eSupplied with bore reducing bushes from 32mm to 13mm\u003c\/li\u003e\n\u003cli\u003eIdeal for metal surface preparation and the removal of rust and scales\u003c\/li\u003e\n\u003cli\u003e0.3 mm crimped steel wire brush suitable for bench grinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003e0.3 mm crimped steel wire brush suitable for bench grinders. Ideal for metal surface preparation and the removal of rust and scales. Supplied with bore reducing bushes from 32mm to 13mm.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e200 x 25 x 38mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e34\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Wheel Brush 200 x 25 x 38mm bore","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676326780,"sku":"WB50","price":26.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB50_a9465cc7-9dc6-4c60-ae4b-b71602bb0325.jpg?v=1771562983"},{"product_id":"abracs-cup-brush-twist-knot-m10-70mm","title":"ABRACS Cup Brush Twist Knot M10, 70mm","description":"\u003cp\u003eThe ABRACS Cup Brush Twist Knot M10, 70mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records M10 size. Use Van line reference WB55 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eWire Ø 0.5 mm\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel and stainless steel\u003c\/li\u003e\n\u003cli\u003eIdeal for the removal of slag, rust, paint and residues of any kind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for the removal of slag, rust, paint and residues of any kind. For use on mild steel and stainless steel.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.267\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Cup Brush Twist Knot M10, 70mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676359548,"sku":"WB55","price":17.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB55.jpg?v=1771562984"},{"product_id":"abracs-cup-brush-twist-knot-m14-70mm","title":"ABRACS Cup Brush Twist Knot M14, 70mm","description":"\u003cp\u003eThe ABRACS Cup Brush Twist Knot M14, 70mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records M14 size. Use Van line reference WB56 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eWire Ø 0.5 mm\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel and stainless steel\u003c\/li\u003e\n\u003cli\u003eIdeal for the removal of slag, rust, paint and residues of any kind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for the removal of slag, rust, paint and residues of any kind. For use on mild steel and stainless steel.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.267\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Cup Brush Twist Knot M14, 70mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676392316,"sku":"WB56","price":18.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB55_29fd166b-c6e8-4930-afb6-d7bc2978ca51.jpg?v=1771562987"},{"product_id":"abracs-cup-brush-twist-knot-m14-95mm","title":"ABRACS Cup Brush Twist Knot M14, 95mm","description":"\u003cp\u003eThe ABRACS Cup Brush Twist Knot M14, 95mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records M14 size. Use Van line reference WB59 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eWire Ø 0.5 mm\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel and stainless steel\u003c\/li\u003e\n\u003cli\u003eIdeal for the removal of slag, rust, paint and residues of any kind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eIdeal for the removal of slag, rust, paint and residues of any kind. For use on mild steel and stainless steel.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.291\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Cup Brush Twist Knot M14, 95mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676425084,"sku":"WB59","price":30.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WB55_c4c38c89-8500-4a26-8845-08eaf138f490.jpg?v=1771562988"},{"product_id":"abracs-phoenix-extra-thin-flat-cutting-disc-230-x-1-8-x-22mm","title":"ABRACS Phoenix Extra Thin Flat Cutting Disc 230 x 1.8 x 22mm","description":"\u003cp\u003eThe ABRACS Phoenix Extra Thin Flat Cutting Disc 230 x 1.8 x 22mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WCD170 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eMax RPM 6,600 80m\/s\u003c\/li\u003e\n\u003cli\u003eO.D. x Thickness x Hole Ø 230 x 1.8 x 22 mm\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eSuperior quality European manufactured and produced to OSA safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eSuperior quality European manufactured and produced to OSA safety standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.076\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Phoenix Extra Thin Flat Cutting Disc 230 x 1.8 x 22mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676457852,"sku":"WCD170","price":52.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCD22N.jpg?v=1771562997"},{"product_id":"abracs-phoenix-ii-flat-cutting-disc-75-x-1-0-x-10mm","title":"ABRACS Phoenix II Flat Cutting Disc 75 x 1.0 x 10mm","description":"\u003cp\u003eThe ABRACS Phoenix II Flat Cutting Disc 75 x 1.0 x 10mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WCD23N when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eMax RPM 20,400 80 m\/s\u003c\/li\u003e\n\u003cli\u003eO.D. x Thickness x Hole Ø 75 x 1.0 x 10 mm\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eSuperior quality European manufactured and produced to OSA safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eSuperior quality European manufactured and produced to OSA safety standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Phoenix II Flat Cutting Disc 75 x 1.0 x 10mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676490620,"sku":"WCD23N","price":18.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCD23N.jpg?v=1771562998"},{"product_id":"abracs-bench-grind-wheel-al-ox-150x20mm-p80","title":"ABRACS Bench Grind Wheel AL\/OX 150x20mm P80","description":"\u003cp\u003eThe ABRACS Bench Grind Wheel AL\/OX 150x20mm P80 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WCD32 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eMax RPM 5,095\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel and hard steel\u003c\/li\u003e\n\u003cli\u003eDesigned for use on a bench grinder or pedestal grinder for deburring and sharpening\u003c\/li\u003e\n\u003cli\u003eMade from premium quality, high grade aluminium oxide abrasive grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMade from premium quality, high grade aluminium oxide abrasive grit. Designed for use on a bench grinder or pedestal grinder for deburring and sharpening. For use on mild steel and hard steel.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Bench Grind Wheel AL\/OX 150x20mm P80","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676523388,"sku":"WCD32","price":23.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCD33.jpg?v=1771563000"},{"product_id":"abracs-bench-grind-wheel-al-ox-150x20mm-p36","title":"ABRACS Bench Grind Wheel AL\/OX 150x20mm P36","description":"\u003cp\u003eThe ABRACS Bench Grind Wheel AL\/OX 150x20mm P36 is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Van line reference WCD33 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1\u003c\/li\u003e\n\u003cli\u003eMax RPM 5,095\u003c\/li\u003e\n\u003cli\u003eFor use on mild steel and hard steel\u003c\/li\u003e\n\u003cli\u003eDesigned for use on a bench grinder or pedestal grinder for deburring and sharpening\u003c\/li\u003e\n\u003cli\u003eMade from premium quality, high grade aluminium oxide abrasive grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMade from premium quality, high grade aluminium oxide abrasive grit. Designed for use on a bench grinder or pedestal grinder for deburring and sharpening. For use on mild steel and hard steel.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Bench Grind Wheel AL\/OX 150x20mm P36","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676556156,"sku":"WCD33","price":29.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCD33_0767be8a-4233-4114-a574-909052ca79e9.jpg?v=1771563001"},{"product_id":"abracs-proflex-extra-thin-flat-cutting-disc-100-x-1-0-x-16mm","title":"ABRACS Proflex Extra Thin Flat Cutting Disc 100 x 1.0 x 16mm","description":"\u003cp\u003eThe ABRACS Proflex Extra Thin Flat Cutting Disc 100 x 1.0 x 16mm is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records 100 x 1.0 x 16mm size. Use Van line reference WCP106 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 10\u003c\/li\u003e\n\u003cli\u003eSuitable for use on an angle grinder\u003c\/li\u003e\n\u003cli\u003eFor use on stainless steel, sheet metal, mild steel and high grade steel\u003c\/li\u003e\n\u003cli\u003eManufactured to European quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eManufactured to European quality standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e100 x 1.0 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nABRACS Proflex Extra Thin Flat Cutting Disc 100 x 1.0 x 16mm","brand":"VAN LINE","offers":[{"title":"Default Title","offer_id":56386676588924,"sku":"WCP106","price":13.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/WCP106.jpg?v=1771563003"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/collections\/van-line-brand-logo.png?v=1786016521","url":"https:\/\/automotopart.co.uk\/collections\/van-line.oembed?page=4","provider":"AutoMotoPart","version":"1.0","type":"link"}