{"title":"Vehicle Service","description":"\n\u003cp\u003eVehicle service tools turn maintenance instructions into controlled measurements, support and assembly. The useful set depends on the job: rated lifting equipment, accurate hand tools, a torque wrench, fluid-handling equipment, electrical test instruments, diagnostic access and application-specific fixtures may all be required. A special tool is often designed to hold, align, compress or protect a component that ordinary pliers or levers would damage.\u003c\/p\u003e\n\u003cp\u003eSelect equipment from the vehicle procedure and tool specification. Check capacity, working range, drive size, adapter, calibration, material compatibility and physical access. A jack must suit the vehicle mass and lifting point; a torque wrench should place the required value within its useful range; a pressure tester must tolerate the fluid and system limit. Do not choose by appearance or maximum headline rating alone.\u003c\/p\u003e\n\u003cp\u003eInspect tools before every job. Look for cracked sockets, mushroomed striking faces, split insulation, damaged test leads, leaking hydraulic equipment, worn spring-compressor threads and missing guards or locking pins. Confirm calibration or proving status for measurement and electrical safety equipment. Remove a suspect tool from service rather than adapting the task around it.\u003c\/p\u003e\n\u003cp\u003ePlan the workspace and control stored energy. Support vehicles and heavy assemblies mechanically, isolate automatic start and high-voltage systems as required, release pressure, let hot systems cool and use task-specific eye, skin, hearing and respiratory protection. A tool does not make a procedure safe by itself; training, service information and correct setup remain essential.\u003c\/p\u003e\n\u003cp\u003eAfter use, clean without removing protective coatings, dry fluid tools, release adjustable settings as instructed and store precision equipment in its case. Record calibration, damage and consumable replacement. Account for every socket, pin and adapter before the vehicle is started, because a tool left in an engine bay can become a projectile or disable a rotating assembly. Vehicle service tools listed below should be matched to a defined operation, then used within their instructions. Stop when access, vehicle design or missing competence makes the intended method uncertain.\u003c\/p\u003e","products":[{"product_id":"autogem-tpt14-tpms-hand-tool-kit","title":"TPMS Hand Tool Kit 12pc","description":"\u003cp\u003eThe TPMS Hand Tool Kit 12pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Autogem reference TPT14 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic Carry Case With Foam Inlay\u003c\/li\u003e\n\u003cli\u003eIncludes Product Identification \u0026amp; Help Guide\u003c\/li\u003e\n\u003cli\u003eFit \u0026amp; Remove TPMS Components With Ease\u003c\/li\u003e\n\u003cli\u003eSpecialist TPMS Hand Tools Kit To Cover All Bases When Fitting \u0026amp; Removing Sensors\u003c\/li\u003e\n\u003cli\u003eIncludes Low Limit Torque Wrench, TPMS Sealing Grommet Removal \u0026amp; Fitting Tool, Pre-Torqued Valve Core Tool, 11mm \u0026amp; 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.09\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n12 Pc TPMS Hand Tool Kit Includes Low Limit Torque Wrench, TPMS Sealing Grommet Removal \u0026amp; Fitting Tool, Pre-Torqued Valve Core Tool, 11mm \u0026amp; 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340876624252,"sku":"TPT14","price":78.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPT14.jpg?v=1771560957"},{"product_id":"wot-nots-pwn189-brake-bleed-tube-automatic","title":"Brake Bleed Tube Automatic","description":"\u003cp\u003eThe Brake Bleed Tube Automatic is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Use Wot-nots reference PWN189 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrake fluid resistant\u003c\/li\u003e\n\u003cli\u003eThe split is normally held below the fluid level in a container to stop air ingress\u003c\/li\u003e\n\u003cli\u003eBrake bleed tube made of soft rubber, connect to a bleed valve and has a split the other end allowing fluid to be expelled into a container\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.027\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nOver time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This Wot-nots Automatic Brake Bleed Tube is made of soft rubber, connects to a bleed valve and has a split the other end allowing fluid to be expelled into a container. The split is normally held below the fluid level in a container to stop air ingress. Brake fluid resistant to stop corrosion when not in use. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.","brand":"WOT-NOTS","offers":[{"title":"1","offer_id":56340900184444,"sku":"PWN189","price":4.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PWN189.jpg?v=1771550055"},{"product_id":"laser-6618a-safety-clamp","title":"Insulated Safety Clamp - 1000V","description":"\u003cp\u003eThe Insulated Safety Clamp - 1000V is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Laser reference 6618A when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight 52 grams\u003c\/li\u003e\n\u003cli\u003eRubber contacts in the jaw protect the insulating shroud\u003c\/li\u003e\n\u003cli\u003eJaw opening 45mm\u003c\/li\u003e\n\u003cli\u003eFor use with insulated shrouding to hold the shroud in situ\u003c\/li\u003e\n\u003cli\u003eDimensions: Length 140mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e195\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.065\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"LASER","offers":[{"title":"1","offer_id":56341077721468,"sku":"6618A","price":26.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Laser_6618A_Safety_Clamp_1.jpg?v=1770641533"},{"product_id":"laser-5598b-adapter-mounting-device-wheel-hub-wheel-bearing","title":"Laser 5598B Adapter, mounting device (wheel hub\/wheel bearing)","description":"\u003cp\u003eThe Laser 5598B Adapter, mounting device (wheel hub\/wheel bearing) is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 95 mm socket width 1, steel construction, M14 x 1,25 thread size, and 17.5 mm thread length. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eAdapter, mounting device (wheel hub\/wheel bearing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSquare Drive Tang Size [mm (inch)] :\u003c\/td\u003e\n\u003ctd\u003e20 (3\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSocket Width 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eBlack-chromed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpanner Size :\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Size :\u003c\/td\u003e\n\u003ctd\u003eM14 x 1,25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e17.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpark Plug :\u003c\/td\u003e\n\u003ctd\u003ePlatinum Middle Electrode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpark Plug :\u003c\/td\u003e\n\u003ctd\u003e1 - Earthed Electrode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpark Plug :\u003c\/td\u003e\n\u003ctd\u003eInterference Suppression 5 kOhm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpark Plug :\u003c\/td\u003e\n\u003ctd\u003ewith taper gasket seat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpark Position [mm] :\u003c\/td\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpark Plug :\u003c\/td\u003e\n\u003ctd\u003eFixed SAE connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"LASER","offers":[{"title":"1","offer_id":56341305622908,"sku":"5598B","price":163.89,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Laser_5598B_Adapter_mounting_device_wheel_hubwheel_bearing_1.jpg?v=1770644623"},{"product_id":"milwaukee-4933440435-m12-cordless-grease-gun-bare-unit","title":"M12 Sub Compact Grease Gun Bare Unit","description":"\u003cp\u003eThe M12 Sub Compact Grease Gun Bare Unit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Pressure (bar): 562 technical info. Use Milwaukee reference 4933440435 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMilwaukee Model No: M12GG-0\u003c\/li\u003e\n\u003cli\u003eIndividual battery cell monitoring optimises tool run time and ensures long term pack durability\u003c\/li\u003e\n\u003cli\u003eGrease capacity 400 ml cartridge, 473 ml bulk\u003c\/li\u003e\n\u003cli\u003eThree way loading - bulk, cartridge and suction capable\u003c\/li\u003e\n\u003cli\u003eIntegrated hose storage \u0026amp; shoulder strap loop - added user convenience and reducing down time\u003c\/li\u003e\n\u003cli\u003eAir bleeder valve - priming mechanism for quick flow\u003c\/li\u003e\n\u003cli\u003eStrong handle balance and ergonomics - only 355 mm long and 3.2 kg\u003c\/li\u003e\n\u003cli\u003eExtreme long run time - dispenses up to 7 cartridges per charge\u003c\/li\u003e\n\u003cli\u003eREDLINK overload protection electronics in tool and battery pack deliver best in class system durability\u003c\/li\u003e\n\u003cli\u003ePowerful 12 V motor delivers over 562 bar max operating pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ePressure (bar): 562\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e506\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e266\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nM12GG-0 - M12  Sub Compact Grease Gun","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341946433916,"sku":"4933440435","price":144.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4933440435.jpg?v=1771524172"},{"product_id":"milwaukee-4933440493-m18-cordless-grease-gun-bare-unit","title":"M18 Grease Gun Bare Unit","description":"\u003cp\u003eThe M18 Grease Gun Bare Unit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4933440493 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated hose storage, shoulder strap loop \u0026amp; LED fuel gauge - added user convenience and reducing down time\u003c\/li\u003e\n\u003cli\u003eAir bleeder valve - priming mechanism for quick flow\u003c\/li\u003e\n\u003cli\u003eREDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life\u003c\/li\u003e\n\u003cli\u003eIndividual battery cell monitoring optimises tool run time and ensures long term pack durability\u003c\/li\u003e\n\u003cli\u003eGrease capacity 400 ml cartridge, 473 ml bulk\u003c\/li\u003e\n\u003cli\u003eStrong handle balance and ergonomics - only 355 mm long and 3.9 kg\u003c\/li\u003e\n\u003cli\u003eExtreme long run time - dispenses up to 7 cartridges per charge\u003c\/li\u003e\n\u003cli\u003eSupplied with 1219 mm high pressure flex hose with spring guard\u003c\/li\u003e\n\u003cli\u003eFlexible battery system: works with all MILWAUKEE® M18™ batteries\u003c\/li\u003e\n\u003cli\u003eREDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability\u003c\/li\u003e\n\u003cli\u003ePowerful 18V motor delivers over 690 bar max. operating pressure\u003c\/li\u003e\n\u003cli\u003eThree way loading - bulk, cartridge and suction capable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e121\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e257\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e524\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.524\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nM18 GG-0 - M18™ grease gun","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341947154812,"sku":"4933440493","price":209.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4933440493.jpg?v=1771524174"},{"product_id":"laser-8474-file-brake-pad-well-cleaning","title":"Laser 8474 File, brake pad well cleaning","description":"\u003cp\u003eThe Laser 8474 File, brake pad well cleaning is a friction component for the vehicle braking system that provides the replaceable friction material used to slow the relevant disc or drum. Its catalogue specification records steel construction, 4 number of circuits, blue colour, and with attachment parts. Match the reference, dimensions, brake system, axle application and wear-sensor provision before fitting; braking components should be installed and checked by a competent person.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eFile, brake pad well cleaning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of circuits :\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith attachment parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"LASER","offers":[{"title":"1","offer_id":56342170075516,"sku":"8474","price":22.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Laser_8474_File_brake_pad_well_cleaning_1.jpg?v=1770650430"},{"product_id":"workshopwarehouse-ab145n-brake-shoe-hold-down-kit","title":"Brake Shoe Hold-Down Kit","description":"\u003cp\u003eThe Brake Shoe Hold-Down Kit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Workshopwarehouse reference AB145N when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContains all the necessary components to secure brake shoes\u003c\/li\u003e\n\u003cli\u003eIncludes hold-down pins, springs and washers\u003c\/li\u003e\n\u003cli\u003eComes in a partitioned box to keep everything organised\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e215\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nBrake Shoe Hold-down Kit","brand":"WORKSHOPWAREHOUSE","offers":[{"title":"1","offer_id":56342170403196,"sku":"AB145N","price":35.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/AB145N.jpg?v=1771529965"},{"product_id":"carlyle-hand-tools-cbbkit-brake-and-clutch-bleeder-automatic","title":"Brake And Clutch Bleeder Automatic","description":"\u003cp\u003eThe Brake And Clutch Bleeder Automatic is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBBKIT when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be done by one person\u003c\/li\u003e\n\u003cli\u003e3 simple steps\u003c\/li\u003e\n\u003cli\u003eThere are a number of adaptors available to fit most vehicles with screw cap reservoirs, singlehanded operation effortlessly bleeds any hydraulic system.\u003c\/li\u003e\n\u003cli\u003eAutomatic system using air from spare tyre\u003c\/li\u003e\n\u003cli\u003eUsing air pressure from a spare wheel it will effortlessly bleed hydraulic systems.\u003c\/li\u003e\n\u003cli\u003eIt sets the standard for affordable brake and clutch bleeding systems.\u003c\/li\u003e\n\u003cli\u003eThis is an automatic brake \u0026amp; clutch bleeder kit that involves three simple steps for single handed bleeding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nUniversal Car Brake System Fluid Bleeder Kit Hydraulic Clutch Oil Emptying Tool","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342170534268,"sku":"CBBKIT","price":23.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBBKIT.jpg?v=1771535812"},{"product_id":"carlyle-hand-tools-cbcb075l-pnuematic-bleeder-brake-clutch","title":"Pneumatic Bleeder Brake and Clutch","description":"\u003cp\u003eThe Pneumatic Bleeder Brake and Clutch is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBCB075L when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet size: 1\/4in.in.BSP\u003c\/li\u003e\n\u003cli\u003eTank capacity: 0.75ltr\u003c\/li\u003e\n\u003cli\u003eVacuum: 60%.\u003c\/li\u003e\n\u003cli\u003eIncludes reservoir top up kit and guidance notes.\u003c\/li\u003e\n\u003cli\u003eDraws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system.\u003c\/li\u003e\n\u003cli\u003eAir consumption: 180ltr\/min\u003c\/li\u003e\n\u003cli\u003eDoes not require specialised brake reservoir caps.\u003c\/li\u003e\n\u003cli\u003eQuick, clean and efficient.\u003c\/li\u003e\n\u003cli\u003eA Simple one man operation using standard workshop air supply 90-120psi\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e420\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nPneumatic Vacuum Brake And Clutch Bleeder 0.75ltr","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342170927484,"sku":"CBCB075L","price":35.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBCB075L.jpg?v=1771535813"},{"product_id":"carlyle-hand-tools-cbcb1l-1ltr-brake-clutch-bleeder-vacuum","title":"1 Litre Brake Clutch Bleeder Vacuum","description":"\u003cp\u003eThe 1 Litre Brake Clutch Bleeder Vacuum is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBCB1L when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet size: 1\/4in. BSP.\u003c\/li\u003e\n\u003cli\u003eTank capacity: 1ltr.\u003c\/li\u003e\n\u003cli\u003eVacuum: 60%.\u003c\/li\u003e\n\u003cli\u003eAir supply: 90-120psi.\u003c\/li\u003e\n\u003cli\u003eDraws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system.\u003c\/li\u003e\n\u003cli\u003eAir consumption: 180ltr\/min\u003c\/li\u003e\n\u003cli\u003eDoes not require specialize brake reservoir caps.\u003c\/li\u003e\n\u003cli\u003eQuick, clean and efficient.\u003c\/li\u003e\n\u003cli\u003eSimple, one man operation using standard workshop air supply (90-120psi)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e131\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nBrake and Clutch Bleeder Vacuum Type 1ltr","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342171091324,"sku":"CBCB1L","price":30.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBCB1L.jpg?v=1771535814"},{"product_id":"carlyle-hand-tools-cbcb3l-brake-and-clutch-bleeder-automatic","title":"Brake And Clutch Bleeder Automatic","description":"\u003cp\u003eThe Brake And Clutch Bleeder Automatic is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBCB3L when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe enclosed operating instructions convey the process in descriptive descriptions, makes it easy to install Works with all cars with 45mm threaded hydraulic fluid reservoir caps and suitable for most European models\u003c\/li\u003e\n\u003cli\u003eHolds 3L of hydraulic fluid flush the entire system with one fill without the risk of running the reservoir dry\u003c\/li\u003e\n\u003cli\u003eMade of high rigidity plastic for enhancing it durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eThe smooth bottle wall and housing makes it easier to clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e580\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nMade of sturdy plastic  this brake bleeder is ideal for home use. It can absorb a staggering three liters of liquid and is thus used in European car models. The sturdy plastic material makes the device not only be easy to clean  but also robust and fac","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342171222396,"sku":"CBCB3L","price":55.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBCB3L.jpg?v=1771535816"},{"product_id":"carlyle-hand-tools-cblflare45-brake-pipe-flaring-kit","title":"Brake Pipe Flaring Kit","description":"\u003cp\u003eThe Brake Pipe Flaring Kit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBLFLARE45 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe flaring tool set is made of durable steel for reliable and longlasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store.\u003c\/li\u003e\n\u003cli\u003eWhen building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leakfree connection without hours of hand cramping or twisting exercises.\u003c\/li\u003e\n\u003cli\u003eThe turret style design allows you to make those precision flares in a minimal time, which saves you the hassle of looking for small parts or losing them.\u003c\/li\u003e\n\u003cli\u003eThis flaring tool is designed to be mounted in a vise, and the Thandle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily.\u003c\/li\u003e\n\u003cli\u003e45 degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines; For 3\/16in., 1\/4in., 5\/16in., 3\/8in. diameter lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e385\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nProfessional Brake Line Flaring Tool  45 Degree Set","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342171976060,"sku":"CBLFLARE45","price":194.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBLFLARE45.jpg?v=1771535828"},{"product_id":"carlyle-hand-tools-cbpwb-piston-wind-back-double-adaptor","title":"Piston Wind Back  Double Adaptor","description":"\u003cp\u003eThe Piston Wind Back Double Adaptor is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 19,33MM pin distance 6mm pin diameter technical info. Use Carlyle hand tools reference CBPWB when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003ebrake piston wind back adaptor\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003e19,33MM pin distance\u003c\/li\u003e \u003cli\u003e6mm pin diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nBrake Piston WindBack Tool with Double Adaptor. Applications: AUDI;80  90  V8S  FORD; SIERRA (ABS)  GRANADA (‘85 on)  FORD (AUSTRALIA\/NZ); TELSTAR  LASER  HONDA; PRELUDE  JAGUAR; XJ40  MAZDA; 323  326  MITSUBISHI; GALANT GLSI  NISSAN; SILVIA 1.8 TURBO  ROVER; 800 Series  SAAB; 9000  SUBARU; L \u0026amp; SERIE","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342172270972,"sku":"CBPWB","price":17.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBPWB.jpg?v=1771535834"},{"product_id":"carlyle-hand-tools-cbpwbda-lh-piston-wind-back-double-adapt","title":"LH Piston Wind Back Double Adapt","description":"\u003cp\u003eThe LH Piston Wind Back Double Adapt is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBPWBDA when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnables retraction of the piston on rear brake calipers allowing new brake pads to be installed.\u003c\/li\u003e\n\u003cli\u003eLeft Handed Brake Piston Wind Back Tool with Double Adaptor Double end tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nLeftHanded Brake Piston WindBack Tool with Double Adaptor, Applications: AUDI;80  90  V8S  FORD;SIERRA (ABS)  GRANADA (‘85 on)  FORD (AUSTRALIA\/NZ);TELSTAR  LASER  HONDA;PRELUDE  JAGUAR;XJ40  MAZDA;323  326  MITSUBISHI;GALANT GLSI  NISSAN;SILVIA 1.8 TURBO  ROVER; 800 Series  SAAB; 9000  SUBARU; L \u0026amp; SERIE","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342172795260,"sku":"CBPWBDA","price":20.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBPWBDA.jpg?v=1771535837"},{"product_id":"carlyle-hand-tools-cbpwbra-vag-rear-brake-piston-back-adapt","title":"VAG Rear Brake Piston Back Adapt","description":"\u003cp\u003eThe VAG Rear Brake Piston Back Adapt is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBPWBRA when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVAG rear brake caliper piston wind back tool adapter\u003c\/li\u003e\n\u003cli\u003eDesigned for repairing dmamaged threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nVAG Rear Brake piston Wind Back Tool Adaptor","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342172991868,"sku":"CBPWBRA","price":11.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBPWBRA.jpg?v=1771535838"},{"product_id":"carlyle-hand-tools-cbpwbs4-4pc-brake-piston-wind-back-tool","title":"4Pc Brake Piston Wind Back Tool","description":"\u003cp\u003eThe 4Pc Brake Piston Wind Back Tool is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBPWBS4 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo be operated with Thandle or 19 mm wrench\u003c\/li\u003e\n\u003cli\u003eWith universal adapter\u003c\/li\u003e\n\u003cli\u003eUsed to reset the brake piston when changing the brake pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e248\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e172\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nBrake Piston Wind Back Set for Audi  Ford  Honda  Mazda Audi: 80  90  V8S  100  A2  A3  A4  A6  A8 and TT Quattro     Ford Sierra (ABS)  Granada  Galaxy  Scorpio     Honda: Prelude     Jaguar: XJ4D     Mazda: 323  326     Mitsubishi: Galant GLSi     Nissan Silvia 1 B Turbo.     Rover: 800 Series     Saab: 9000     Seat Ibiza  Toledo  Leon  Arosa  Alhambra     Skoda: Fabia  Octavia  Superb     Subaru: L \u0026amp; Series 2     Toyota: Celica  Corolla GT Mr2     Volvo: 440  460  480  S40  V40     VW: Golf 3  Golf 4  Golf 5  Lupo  New Beetle       Passat  Polo  Sharan  Touareg  Touran       Transporter T4  T5     includes: pressure plate  adapter","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342173155708,"sku":"CBPWBS4","price":21.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBPWBS4.jpg?v=1771535844"},{"product_id":"carlyle-hand-tools-cbpwbs50-master-brake-piston-wind-back-tool","title":"Master Brake Piston Wind Back Tool","description":"\u003cp\u003eThe Master Brake Piston Wind Back Tool is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBPWBS50 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes left and right handed thrust bolt assemblies, caliper removal tools and grease container.\u003c\/li\u003e\n\u003cli\u003eSuitable for pushback and windback brake pistons.\u003c\/li\u003e\n\u003cli\u003eComprehensive master set of adaptors to suit a wide range of vehicle applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n50PC Brake Piston Wind Back Tool Kit","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342173286780,"sku":"CBPWBS50","price":135.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/batch_CBPWBS50.jpg?v=1771535845"},{"product_id":"carlyle-hand-tools-cbrsc-45mm-brake-resrvoir-cap-cbc3l","title":"45mm Brake Reservoir Cap","description":"\u003cp\u003eThe 45mm Brake Reservoir Cap is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBRSC when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe enclosed operating instructions convey the process in descriptive descriptions, makes it easy to install Works with all cars with 45mm threaded hydraulic fluid reservoir caps and suitable for most European models\u003c\/li\u003e\n\u003cli\u003eHolds 3L of hydraulic fluid flush the entire system with one fill without the risk of running the reservoir dry\u003c\/li\u003e\n\u003cli\u003eMade of high rigidity plastic for enhancing it durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eThe smooth bottle wall and housing makes it easier to clean\u003c\/li\u003e\n\u003cli\u003eFits CBCB3L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nFor use in conjunction with Model No's CBRSC  Brake \u0026amp; Clutch Bleeding Systems. Brake reservoir cap 45mm with straight coupling.","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342173516156,"sku":"CBRSC","price":18.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBRSC.jpg?v=1771535847"},{"product_id":"carlyle-hand-tools-cbsa-brake-show-lever-car-and-lv","title":"Brake Shoe Lever","description":"\u003cp\u003eThe Brake Shoe Lever is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CBSA when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for cars and light commercials\u003c\/li\u003e\n\u003cli\u003eMay be used to lever the brake shoe to adjust the mechanical adjuster or through slots in the backing plate to turn the star wheel type adjuster.\u003c\/li\u003e\n\u003cli\u003eAdjusts the clearance between the brake drum and shoe.\u003c\/li\u003e\n\u003cli\u003eDesigned for use on hydraulic braking systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e191\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e255\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nBrake Shoe Adjuster","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342173679996,"sku":"CBSA","price":12.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBSA.jpg?v=1771535849"},{"product_id":"carlyle-hand-tools-cmbgs-brake-pad-thickness-keys","title":"Brake Pad Thickness Keys","description":"\u003cp\u003eThe Brake Pad Thickness Keys is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CMBGS when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eThe brake gauge tool was designed to give customers an accurate measurement of how much brake lining is left without guess work\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nSmall Flexible Hose Clamp","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342174368124,"sku":"CMBGS","price":16.69,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CMBGS.jpg?v=1771536697"},{"product_id":"carlyle-hand-tools-cmincut-mini-brake-fuel-pipe-cutter-3-19mm","title":"Mini Brake Fuel Pipe Cutter 3mm to 19mm","description":"\u003cp\u003eThe Mini Brake Fuel Pipe Cutter 3mm to 19mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CMINCUT when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor 1\/8in.in. to 5\/8in.in.( 3 to 19 mm ) O.D. tubing\u003c\/li\u003e\n\u003cli\u003eSome cutters have another cutting blade inside.\u003c\/li\u003e\n\u003cli\u003eSpecial 65MN material blade, cut tubing more sharp and accurate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nProfessional Brake Line Double Flaring Tool for 3\/16″ 4.75 mm Pipe One Hand Opeation","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342174531964,"sku":"CMINCUT","price":11.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CMINCUT.jpg?v=1771536700"},{"product_id":"carlyle-hand-tools-cpbcr23-brake-piston-wind-back-tool-air-ope","title":"Brake Piston Wind Back Tool Air Ope","description":"\u003cp\u003eThe Brake Piston Wind Back Tool Air Ope is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CPBCR23 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorking pressure: 5 to max. 8 bar\u003c\/li\u003e\n\u003cli\u003eIncludes 21 resetting adaptors, also 3 and 4pin adaptor for newer vehicles\u003c\/li\u003e\n\u003cli\u003eAlso suitable for brake callipers with hand brake function.\u003c\/li\u003e\n\u003cli\u003eHand lever for rotary function, suitable for left and right turns.\u003c\/li\u003e\n\u003cli\u003eFor air pressure assisted resetting of brake pistons.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e390\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e390\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nManual Brake Gauge Set","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342174663036,"sku":"CPBCR23","price":163.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/batch_CPBCR23.jpg?v=1771537299"},{"product_id":"carlyle-hand-tools-ctubecut-brake-and-fuel-pipe-cutter-3-22mm","title":"Brake And Fuel Pipe Cutter 322mm","description":"\u003cp\u003eThe Brake And Fuel Pipe Cutter 322mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CTUBECUT when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor hard or soft copper, aluminium, brass, thin wall steel, stainless steel, titanium and other tubing.\u003c\/li\u003e\n\u003cli\u003eFor 1\/8 inch to 7\/8in.in. ( 3 to 22 mm ) O.D. tubing\u003c\/li\u003e\n\u003cli\u003eSome cutters have another cutting blade inside\u003c\/li\u003e\n\u003cli\u003eSpecial 65Mn material blade, cut tubing more sharp and accurate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTube Cutter1\/8in.7\/8in.（322MM）","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342174859644,"sku":"CTUBECUT","price":13.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CTUBECUT.jpg?v=1771537971"},{"product_id":"carlyle-hand-tools-cvtbbk21-vacuum-pressure-brake-bleeder-kit","title":"Vacuum Pressure Brake Bleeder Kit","description":"\u003cp\u003eThe Vacuum Pressure Brake Bleeder Kit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CVTBBK21 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePositive pressure: 0 ~ 60 PSI Negative pressure. 0~ 30 PSI\u003c\/li\u003e\n\u003cli\u003eLarge easy to read gauge\u003c\/li\u003e\n\u003cli\u003elight weight aluminium body with simple twist function for choice of pressure or vacuum testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nProfessional vacuum\/pressure diagnostic tool helps identify a variety of faults on vehicle systems including fuel  ignition  transmission  emission and air conditioning\/heating. Kit also includes reservoirs  hoses and adaptors for bleeding brake and clutch systems. Features lightweight aluminium body with simple twist function for choice of pressure or vacuum testing. Large rubber easytoread gauge.","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342175056252,"sku":"CVTBBK21","price":56.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/batch_CVTBBK21.jpg?v=1771538082"},{"product_id":"apec-hubkit-hub-cleaning-kit","title":"Brake hub resurfacing kit","description":"\u003cp\u003eThe Brake hub resurfacing kit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Apec reference HUBKIT when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eThis tool is specifically designed to tackle rust buildup on car hub shafts and brake discs, ensurings a thorough cleaning process that restores your vehicle's.\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e6.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nBrake Hub Resurfacing Kit, Automotive Hub Shaft Brake Disc Rust Removal","brand":"APEC","offers":[{"title":"1","offer_id":56342175285628,"sku":"HUBKIT","price":26.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/HUBKIT.jpg?v=1771542242"},{"product_id":"laser-7027b-centering-tool-set-clutch","title":"Laser 7027B Centering Tool Set, clutch","description":"\u003cp\u003eThe Laser 7027B Centering Tool Set, clutch is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records steel and EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, 22 mm inner diameter 1, 22 mm inner diameter 2, and 4 bar working pressure. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCentering Tool Set, clutch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\/Removal :\u003c\/td\u003e\n\u003ctd\u003efor mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\/Removal :\u003c\/td\u003e\n\u003ctd\u003efor removal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Parts [parts] :\u003c\/td\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [m] :\u003c\/td\u003e\n\u003ctd\u003e0.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure [bar] :\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature from [°C] :\u003c\/td\u003e\n\u003ctd\u003e-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature to [°C] :\u003c\/td\u003e\n\u003ctd\u003e+100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"LASER","offers":[{"title":"1","offer_id":56342175613308,"sku":"7027B","price":489.05,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Laser_7027B_Centering_Tool_Set_clutch_1.jpg?v=1770650562"},{"product_id":"laser-0662-puller-bell-mounting-tool-wheel-hub-wheel-bearing","title":"Laser 0662 Puller Bell, mounting tool (wheel hub\/wheel bearing)","description":"\u003cp\u003eThe Laser 0662 Puller Bell, mounting tool (wheel hub\/wheel bearing) is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 6 parts number of parts, steel construction, and silver colour. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003ePuller Bell, mounting tool (wheel hub\/wheel bearing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Parts [parts] :\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003esilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"LASER","offers":[{"title":"1","offer_id":56342176137596,"sku":"0662","price":15.2,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Laser_0662_Puller_Bell_mounting_tool_wheel_hubwheel_bearing_1.jpg?v=1770650575"},{"product_id":"blue-print-adt35502-oil-filter-wrench","title":"Blue Print ADT35502 Oil Filter Wrench","description":"\u003cp\u003eThe Blue Print ADT35502 Oil Filter Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eOil Filter Wrench\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BLUE PRINT","offers":[{"title":"1","offer_id":56342181937532,"sku":"ADT35502","price":20.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Blue_Print_ADT35502_Oil_Filter_Wrench_1.jpg?v=1770650716"},{"product_id":"blue-print-adt35503-oil-filter-wrench","title":"Blue Print ADT35503 Oil Filter Wrench","description":"\u003cp\u003eThe Blue Print ADT35503 Oil Filter Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records filter Insert filter design. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eOil Filter Wrench\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilter type :\u003c\/td\u003e\n\u003ctd\u003eFilter Insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BLUE PRINT","offers":[{"title":"1","offer_id":56342182953340,"sku":"ADT35503","price":20.14,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Blue_Print_ADT35503_Oil_Filter_Wrench_1.jpg?v=1770650734"},{"product_id":"carlyle-hand-tools-cch3s177m-cylinder-hone-tool-50-175mm-medium","title":"Cylinder Hone Tool 50-175mm","description":"\u003cp\u003eThe Cylinder Hone Tool 50-175mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CCH3S177M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSleeve makes insertion in cylinder easy and protects stones when not in use\u003c\/li\u003e\n\u003cli\u003eCollar prevents stone breakage\u003c\/li\u003e\n\u003cli\u003eStone size: 3pc 76mm stones\u003c\/li\u003e\n\u003cli\u003eRange (51 to 177mm)\u003c\/li\u003e\n\u003cli\u003eFlexible shaft for easy use and selfcentering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e460\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3in. 3 Stones Piston Cylinder Hone 2in.7in.(51177mm)","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342183117180,"sku":"CCH3S177M","price":35.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCH3S177M.jpg?v=1771535887"},{"product_id":"carlyle-hand-tools-ccldtest-cylinder-leak-detector-kit","title":"Cylinder Leak Detector Kit Petrol","description":"\u003cp\u003eThe Cylinder Leak Detector Kit Petrol is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CCLDTEST when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with any petrol engine with 10, 12 or 14mm spark plugs\u003c\/li\u003e\n\u003cli\u003eDesigned for detecting a range of common engine issues related to piston rings, valves, cylinder head and head gaskets\u003c\/li\u003e\n\u003cli\u003eIdeal for testing trucks \u0026amp; new model vehicles\u003c\/li\u003e\n\u003cli\u003eTester helps measuring the amount of leakage in an engine cylinder\u003c\/li\u003e\n\u003cli\u003eDiagnose low compression cylinders, worn piston rings, worn valves, cylinder head leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.82\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nFunction: test cylinder leak.  .Tester checks the amount of leakage in an engine cylinder and helps determine the source. .Best used when comparing a suspect cylinder to a know good cylinder on same engine. .Ideal for testing trucks \u0026amp; late model cars wher","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342183444860,"sku":"CCLDTEST","price":60.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/batch_CCLDTEST.jpg?v=1771535904"},{"product_id":"carlyle-hand-tools-cdcomptest-diesel-engine-compression-kit","title":"Diesel Engine Compression Kit","description":"\u003cp\u003eThe Diesel Engine Compression Kit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CDCOMPTEST when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdentification of worn: valves, seats, guides, piston rings and cylinder head and gasket seals\u003c\/li\u003e\n\u003cli\u003eDual scale pressure gauge 01000psi\/ 070bar with quick release connection system.\u003c\/li\u003e\n\u003cli\u003eFault diagnostic kit for checking compression loss on cars, vans and small tractors with diesel engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.81\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nA comprehensive range of glow plug adaptors and dummy injectors for checking the compression on diesel engines","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342183575932,"sku":"CDCOMPTEST","price":133.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CDCOMPTEST_2.jpg?v=1771536170"},{"product_id":"carlyle-hand-tools-cdicut11-10pc-injector-seat-cleaner-diesel","title":"Injector Seat Cleaner Diesel","description":"\u003cp\u003eThe Injector Seat Cleaner Diesel is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CDICUT11 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwin cam action permits use from above or below valve.\u003c\/li\u003e\n\u003cli\u003eReversible jaw and adaptor.\u003c\/li\u003e\n\u003cli\u003eUniversal jaw with 55 to 175mm capacity and 165mm throat depth.\u003c\/li\u003e\n\u003cli\u003eSuitable also for general use on OHC, OHV and CVH engines.\u003c\/li\u003e\n\u003cli\u003eSuitable for use on multivalve petrol and diesel engines with deepseated valves.\u003c\/li\u003e\n\u003cli\u003esuitable for a wide range of vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n11PC Diesel Injector Seat Cutter Set","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342184034684,"sku":"CDICUT11","price":68.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CDICUT11.jpg?v=1771536183"},{"product_id":"carlyle-hand-tools-cffwford-fuel-filter-tool-ford-transit","title":"Fuel Filter Tool Ford Transit","description":"\u003cp\u003eThe Fuel Filter Tool Ford Transit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CFFWFORD when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eSpecialy designed for the correct removal and fitment of the fuel filter housing on the 2.2 TDCi engine of Ford Mondeo and Transit since 2012.\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nFuel Filter Wrench Ford Transit 2.2 TDCi","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342184395132,"sku":"CFFWFORD","price":17.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CFFWFORD.jpg?v=1771536230"},{"product_id":"carlyle-hand-tools-cflowmet-diesel-injector-leak-back-tool","title":"Diesel Injector Leak Back Tool","description":"\u003cp\u003eThe Diesel Injector Leak Back Tool is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CFLOWMET when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePremium quality material: All the tools are well organized in a blow molded case for easy transportation, simple storage, and quick identification. The adapters made of high density copper, high rigidity and strength.\u003c\/li\u003e\n\u003cli\u003ePrecise reading: This auto diesel diagnostic injector kit is design to measure the amount of the fuel that every injector returns to the deposit tank rapidly and effectively, precise scale tools, makes the fuel flow diagnostic work accurately\u003c\/li\u003e\n\u003cli\u003eFitment: Fit for all injector types for Bosch injectors, for Siemens injectors, for Delphi injectors, for Denso injectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.82\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nFlow Meter and Adaptor Set for Common Rail Diesels","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342184690044,"sku":"CFLOWMET","price":82.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CFLOWMET.jpg?v=1771536242"},{"product_id":"carlyle-hand-tools-cgcomptest-8pc-compression-test-kit-petrol","title":"8Pc Compression Test Kit Petrol","description":"\u003cp\u003eThe 8Pc Compression Test Kit Petrol is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CGCOMPTEST when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eDiagnostic tool as it confirms common engine problems like leaking valves or worn piston rings.\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e440\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n.Excellent diagnostic tool as it confirms common engine problems like leaking valves or worn piston rings. .Kit includes    130mm straight and angled pushon connectors   400mm flexible extension with 10  12  14 and 18mm deep thread adaptors.   2 1\/2 inch","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342184853884,"sku":"CGCOMPTEST","price":27.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CGCOMPTEST.jpg?v=1771536260"},{"product_id":"carlyle-hand-tools-cheadstand-cylinder-head-stands","title":"Cylinder Head Stands","description":"\u003cp\u003eThe Cylinder Head Stands is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CHEADSTAND when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePin Diameter: 16mm\u003c\/li\u003e\n\u003cli\u003eAlso provides the clearance between head and workbench required when reaming valve guides.\u003c\/li\u003e\n\u003cli\u003eA pair of support stands which locate into cylinder head via stud holes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nCylinder Head Work Stands","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342185083260,"sku":"CHEADSTAND","price":27.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CHEADSTAND.jpg?v=1771536280"},{"product_id":"carlyle-hand-tools-cleakdetturbo-9pc-turbo-charger-leakage-tester","title":"9Pc Turbo Charger Leakage Tester","description":"\u003cp\u003eThe 9Pc Turbo Charger Leakage Tester is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CLEAKDETTURBO when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan also be used on cooling systems hoses.\u003c\/li\u003e\n\u003cli\u003eFeatures a pressure gauge with shut off valve and pressure release valve.\u003c\/li\u003e\n\u003cli\u003eKit supplied with 8 stepped adaptors to fit most hose sizes.\u003c\/li\u003e\n\u003cli\u003eUsed in conjunction with an air line to show the presence of leaks\u003c\/li\u003e\n\u003cli\u003esizes; 35 to 95mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.59\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTurbo System Leakage Tester","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342185410940,"sku":"CLEAKDETTURBO","price":92.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/batch_CLEAKDETURBO.jpg?v=1771536658"},{"product_id":"carlyle-hand-tools-cmcomptest-master-compression-test-kit","title":"Master Compression Test Kit","description":"\u003cp\u003eThe Master Compression Test Kit is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CMCOMPTEST when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis set also includes claw, clamp and spacers for dummy profiling which is suitable for Car, Van, Truck, Bus, Agricultural \u0026amp; Marine injector sizes (suitable for use where injector is held in place by clamp \/ claw \/ bridge. Collar system allows easy match\u003c\/li\u003e\n\u003cli\u003eThis set could cover most modern car, van, truck, bus, agricultural and marine engines.\u003c\/li\u003e\n\u003cli\u003eFeatures 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark\/glow plug and injector adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.09\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3 Inch Piston Ring Compressor 53175mm","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342185607548,"sku":"CMCOMPTEST","price":182.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/batch_CMCOMPTEST.jpg?v=1771536698"},{"product_id":"carlyle-hand-tools-co2vss5-5pc-oxygen-sensor-thread-chaser","title":"5Pc Oxygen Sensor Thread Chaser","description":"\u003cp\u003eThe 5Pc Oxygen Sensor Thread Chaser is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CO2VSS5 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with 2 x thread chasers for cleaning and repairing damaged threads.\u003c\/li\u003e\n\u003cli\u003eSuitable for Titania and Zirconia oxygen sensors found on almost all modern vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nSuitable for Titania and Zirconia oxygen sensors found on almost all modern vehicles.","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342186000764,"sku":"CO2VSS5","price":29.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/batch_CO2VSS5.jpg?v=1771537228"},{"product_id":"carlyle-hand-tools-cofbw115m-oil-filter-band-type-65-115mm","title":"Oil Filter Band Type 65 -105mm","description":"\u003cp\u003eThe Oil Filter Band Type 65 -105mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference COFBW115M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eDesigned for the removal and installation of oil filters\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e118\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nUniversal Oil Filter Wrench Band 65115mm Oil Filter Spanner","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342186197372,"sku":"COFBW115M","price":12.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/COFBW115M.jpg?v=1771537247"},{"product_id":"carlyle-hand-tools-cofcs36m-oil-filter-tool-36mm","title":"Oil Filter Tool 36mm","description":"\u003cp\u003eThe Oil Filter Tool 36mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference COFCS36M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle applications. BMW, ford 20.d transit , Mercedes Vito, Vauxhall 98 onwards\u003c\/li\u003e\n\u003cli\u003eLow profile design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e96\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3\/8in. Oil Filter Socket 36mm","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342186656124,"sku":"COFCS36M","price":11.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/COFCS36M.jpg?v=1771537248"},{"product_id":"carlyle-hand-tools-cofcss1484m-oil-filter-tool-merc-14-flute-84mm","title":"Oil Filter Tool Merc 14 Flute 84mm","description":"\u003cp\u003eThe Oil Filter Tool Merc 14 Flute 84mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference COFCSS1484M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eUsed for the removal and replacement of oil filters without damage.\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nOil Filter Socket14P\/84mm","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342186951036,"sku":"COFCSS1484M","price":14.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/COFCSS1484M.jpg?v=1771537252"},{"product_id":"carlyle-hand-tools-cofcw74m-oil-filter-tool-14-flute-74mm","title":"Oil Filter Tool 14 Flute 74mm","description":"\u003cp\u003eThe Oil Filter Tool 14 Flute 74mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference COFCW74M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eused for the removal and replace oil fileters without damage.\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e490\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2in. Oil Filter Cup Wrench 74mm","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342187278716,"sku":"COFCW74M","price":17.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/COFCW74M.jpg?v=1771537255"},{"product_id":"carlyle-hand-tools-cofcwhd195m-air-dryer-cartridge-removal-tool","title":"Air Dryer Cartridge \u0026 Oil Filter Removal Tool","description":"\u003cp\u003eThe Air Dryer Cartridge \u0026amp; Oil Filter Removal Tool is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference COFCWHD195M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for oil filters 60mm to 195 mm\u003c\/li\u003e\n\u003cli\u003eEasy to use due to special chainlock\u003c\/li\u003e\n\u003cli\u003eClaw prevents slipping\u003c\/li\u003e\n\u003cli\u003eHandle satin chrome finished\u003c\/li\u003e\n\u003cli\u003eChain width approx. 22 mm\u003c\/li\u003e\n\u003cli\u003eHeavy duty tool with duplex chain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e52\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nHeavy Duty Oil Filter Chain Wrench 60195mm","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342187508092,"sku":"COFCWHD195M","price":47.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/batch_COFCWHD195M.jpg?v=1771537256"},{"product_id":"carlyle-hand-tools-cofcwtoy-oil-filter-tool-toyota-14-flute","title":"Oil Filter Tool Toyota 14 Flute","description":"\u003cp\u003eThe Oil Filter Tool Toyota 14 Flute is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference COFCWTOY when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eusd to removel and replace oil filetsr without damage.\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n64.5mm Oil Filter Cap Removal Tool for Toyota Camry RAV4 Highlander 2.5L5.7L Application: for Lexus ES350 20072021 for Lexus LX570 20082011 for Lexus LX570 20132021 for Toyota Avalon 20052021 for Toyota RAV4 2.5L 20092015 for Toyota RAV4 3.5L 20062012 for","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342187704700,"sku":"COFCWTOY","price":14.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/COFCWTOY.jpg?v=1771537259"},{"product_id":"carlyle-hand-tools-cofhri-oil-filter-tool-jag-ford-peu-202-2d","title":"Oil Filter Tool Jag Ford Peu 20. 2.2D","description":"\u003cp\u003eThe Oil Filter Tool Jag Ford Peu 20. 2.2D is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference COFHRI when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt is not possible to locate onto the oil filter housing from above due to the inlet system restricting access.\u003c\/li\u003e\n\u003cli\u003eThe spanner has been designed in order to avoid the inlet system and wiring loom next to the oil filter housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nOil Filter Housing Removal \/ Installation Tool","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342187868540,"sku":"COFHRI","price":20.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/COFHR1.jpg?v=1771537260"},{"product_id":"carlyle-hand-tools-cofkeyhook-oil-filter-tool-65-110mm","title":"Oil Filter Tool 75 -95mm","description":"\u003cp\u003eThe Oil Filter Tool 75 -95mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference COFKEYHOOK when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits oil filter elements on most domestic.\u003c\/li\u003e\n\u003cli\u003eOptimum grip and torque.\u003c\/li\u003e\n\u003cli\u003eQuick gripping precision machined jaws\u003c\/li\u003e\n\u003cli\u003eDurable baked enamel finish.\u003c\/li\u003e\n\u003cli\u003eChrome vanadium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e126\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nFor filters from 65110mm.","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342188163452,"sku":"COFKEYHOOK","price":11.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/COFKEYHOOK.jpg?v=1771537261"},{"product_id":"carlyle-hand-tools-cofw12f76m-oil-filter-tool-12-flute-76mm","title":"Oil Filter Tool 12 Flute 76mm","description":"\u003cp\u003eThe Oil Filter Tool 12 Flute 76mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference COFW12F76M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle application; Ford, PSA, Renault, VAG\u003c\/li\u003e\n\u003cli\u003eOptimum grip and torque.\u003c\/li\u003e\n\u003cli\u003eddd\u003c\/li\u003e\n\u003cli\u003eDesign helps prevent damage to filter housing.\u003c\/li\u003e\n\u003cli\u003eLow profile.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nOil Filter Wrench 76MM\/12F","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342188949884,"sku":"COFW12F76M","price":11.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/COFW12F76M.jpg?v=1771537266"}],"url":"https:\/\/automotopart.co.uk\/collections\/vehicle-service.oembed?page=6","provider":"AutoMotoPart","version":"1.0","type":"link"}