{"title":"HONDA","description":"\n\u003cp\u003eHonda parts fitment begins with the exact generation and powertrain. Civic, Jazz, Accord, CR-V and HR-V names cover different body structures, engines, transmissions and hybrid systems, sometimes within the same registration year. Record the VIN, production date, body, full engine or traction-motor code, gearbox, driven axles and brake\/safety options, then verify labels, dimensions, connector keys and the installed part.\u003c\/p\u003e\n\u003cp\u003ePetrol engines can differ in valve-control hardware, injection, turbocharging and timing drive. Diesel variants have their own common-rail, turbo, EGR and DPF arrangements. Older integrated-motor hybrids and later e:HEV systems do not share one battery, motor or transmission architecture. A Jazz e:HEV described as an e-CVT does not use the same belt-and-pulley mechanism as a conventional CVT; propulsion type must be established before fluid or driveline selection.\u003c\/p\u003e\n\u003cp\u003eMany Honda engines use mechanically checked valve clearances, but interval, cold measurement, sequence and target depend on the exact engine. Tight valves can cause poor compression without obvious ticking. Use the specified engine-oil viscosity and approval, correct coolant and fresh brake fluid. Manual, stepped automatic, conventional CVT, dual-clutch and hybrid drive units each require their named lubricant and level procedure; generic ATF is not a safe substitute.\u003c\/p\u003e\n\u003cp\u003eMatch brakes by caliper, disc diameter\/thickness\/offset, pad contour and axle. Suspension depends on generation, body, engine or battery mass and two- or all-wheel drive. CR-V and HR-V all-wheel-drive parts require the rear coupling or differential identity and dedicated fluid where specified.\u003c\/p\u003e\n\u003cp\u003eDiagnose misfire, valve noise, CVT judder, charging warnings, overheating, DPF faults or steering\/suspension noises with complete scan data and physical tests. Start with battery state and voltage drop, then compare compression, valve clearance, pressure, temperature and movement.\u003c\/p\u003e\n\u003cp\u003eUse correct torque and one-use fasteners, restore shields, air guides, wiring clips and grounds, and complete bleeding, transmission learning or driver-assistance calibration. Honda Sensing camera\/radar aim can be affected by glass, bumper and chassis work. Fuel pressure, valves, airbags, springs, brakes and high voltage require competent control. Do not drive with brake\/steering defects, severe tyre damage, overheating, fuel leaks, red warnings, unsafe transmission engagement or battery impact damage; resolve these before UK road or MOT use.\u003c\/p\u003e","products":[{"product_id":"gates-05-1518-radiator-hose","title":"Gates 05-1518 Radiator Hose","description":"\u003cp\u003eThe Gates 05-1518 Radiator Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 29 mm inner diameter 1, and 29 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRadiator Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e051518\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315068514684,"sku":"05-1518","price":15.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_05-1518_Radiator_Hose_1.jpg?v=1770157033"},{"product_id":"gates-05-1737-radiator-hose","title":"Gates 05-1737 Radiator Hose","description":"\u003cp\u003eThe Gates 05-1737 Radiator Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 30 mm inner diameter 1, and 30 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRadiator Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e452\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e051737\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315069268348,"sku":"05-1737","price":17.29,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_05-1737_Radiator_Hose_1.jpg?v=1770157088"},{"product_id":"gates-05-2011-radiator-hose","title":"Gates 05-2011 Radiator Hose","description":"\u003cp\u003eThe Gates 05-2011 Radiator Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 30 mm inner diameter 1, and 30 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRadiator Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e052011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315070579068,"sku":"05-2011","price":14.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_05-2011_Radiator_Hose_1.jpg?v=1770157167"},{"product_id":"gates-05-2014-radiator-hose","title":"Gates 05-2014 Radiator Hose","description":"\u003cp\u003eThe Gates 05-2014 Radiator Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 26 mm inner diameter 1, and 26 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRadiator Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e620\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e052014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315070644604,"sku":"05-2014","price":12.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_05-2014_Radiator_Hose_1.jpg?v=1770157173"},{"product_id":"gates-05-2441-radiator-hose","title":"Gates 05-2441 Radiator Hose","description":"\u003cp\u003eThe Gates 05-2441 Radiator Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 25.94 mm inner diameter 1, and 25.8 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRadiator Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e25.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e25.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e052441\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315076346236,"sku":"05-2441","price":11.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_05-2441_Radiator_Hose_1.jpg?v=1770157633"},{"product_id":"gates-05-4560-radiator-hose","title":"Gates 05-4560 Radiator Hose","description":"\u003cp\u003eThe Gates 05-4560 Radiator Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 30 mm inner diameter 1, and 30 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRadiator Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e054560\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315153285500,"sku":"05-4560","price":10.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_05-4560_Radiator_Hose_1.jpg?v=1770161539"},{"product_id":"gates-05-4883-radiator-hose","title":"Gates 05-4883 Radiator Hose","description":"\u003cp\u003eThe Gates 05-4883 Radiator Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 30 mm inner diameter 1, and 30 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRadiator Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e054883\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315171701116,"sku":"05-4883","price":10.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_05-4883_Radiator_Hose_1.jpg?v=1770162280"},{"product_id":"gates-05-5603-radiator-hose","title":"Gates 05-5603 Radiator Hose","description":"\u003cp\u003eThe Gates 05-5603 Radiator Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 26 mm inner diameter 1, and 26 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eRadiator Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e055603\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315194147196,"sku":"05-5603","price":13.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_05-5603_Radiator_Hose_1.jpg?v=1770163369"},{"product_id":"gates-09-1592-charge-air-hose","title":"Gates 09-1592 Charge Air Hose","description":"\u003cp\u003eThe Gates 09-1592 Charge Air Hose is a replacement engine air-management component that carries or cools intake air between the turbocharger, charge cooler and engine. Its catalogue specification records ACM (Polyacrylate) construction, black colour, 44 mm inner diameter 1, and 44 mm inner diameter 2. Confirm the reference, hose or core dimensions, connections, material and engine application before fitting, then inspect adjoining pipes and clamps for leaks or damage.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCharge Air Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eACM (Polyacrylate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e091592\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315336294780,"sku":"09-1592","price":25.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_09-1592_Charge_Air_Hose_1.jpg?v=1770174751"},{"product_id":"gates-09-1593-charge-air-hose","title":"Gates 09-1593 Charge Air Hose","description":"\u003cp\u003eThe Gates 09-1593 Charge Air Hose is a replacement engine air-management component that carries or cools intake air between the turbocharger, charge cooler and engine. Its catalogue specification records ACM (Polyacrylate) construction, black colour, 59.5 mm inner diameter 1, and 58 mm inner diameter 2. Confirm the reference, hose or core dimensions, connections, material and engine application before fitting, then inspect adjoining pipes and clamps for leaks or damage.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCharge Air Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eACM (Polyacrylate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e59.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e58\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e091593\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315336360316,"sku":"09-1593","price":25.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_09-1593_Charge_Air_Hose_1.jpg?v=1770174757"},{"product_id":"gates-t227rb-timing-belt","title":"Gates T227RB Timing Belt","description":"\u003cp\u003eThe Gates T227RB Timing Belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records Fiberglass tensile cord material, HNBR (hydrogenated nitrile butadiene rubber) belt material, blue colour, and 124 teeth. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelts :\u003c\/td\u003e\n\u003ctd\u003ewith trapezoidal tooth profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuality :\u003c\/td\u003e\n\u003ctd\u003eOE Improved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVersion :\u003c\/td\u003e\n\u003ctd\u003eReinforced Part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Cord Material :\u003c\/td\u003e\n\u003ctd\u003eFiberglass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelt Material :\u003c\/td\u003e\n\u003ctd\u003eHNBR (hydrogenated nitrile butadiene rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Teeth :\u003c\/td\u003e\n\u003ctd\u003e124\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth Pitch [mm] :\u003c\/td\u003e\n\u003ctd\u003e9.525\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,181\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315420148092,"sku":"T227RB","price":51.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T227RB_Timing_Belt_1.jpg?v=1770186197"},{"product_id":"gates-t247rb-timing-belt","title":"Gates T247RB Timing Belt","description":"\u003cp\u003eThe Gates T247RB Timing Belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records Fiberglass tensile cord material, HNBR (hydrogenated nitrile butadiene rubber) belt material, blue colour, and 126 teeth. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelts :\u003c\/td\u003e\n\u003ctd\u003ewith trapezoidal tooth profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuality :\u003c\/td\u003e\n\u003ctd\u003eOE Improved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVersion :\u003c\/td\u003e\n\u003ctd\u003eReinforced Part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Cord Material :\u003c\/td\u003e\n\u003ctd\u003eFiberglass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelt Material :\u003c\/td\u003e\n\u003ctd\u003eHNBR (hydrogenated nitrile butadiene rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Teeth :\u003c\/td\u003e\n\u003ctd\u003e126\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth Pitch [mm] :\u003c\/td\u003e\n\u003ctd\u003e9.525\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315420213628,"sku":"T247RB","price":48.34,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T247RB_Timing_Belt_1.jpg?v=1770186208"},{"product_id":"gates-t275-timing-belt","title":"Gates T275 Timing Belt","description":"\u003cp\u003eThe Gates T275 Timing Belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records Fiberglass tensile cord material, Polychloroprene (Neoprene) belt material, black colour, and 88 teeth. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Cord Material :\u003c\/td\u003e\n\u003ctd\u003eFiberglass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelt Material :\u003c\/td\u003e\n\u003ctd\u003ePolychloroprene (Neoprene)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Teeth :\u003c\/td\u003e\n\u003ctd\u003e88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTooth Pitch [mm] :\u003c\/td\u003e\n\u003ctd\u003e9.525\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength [mm] :\u003c\/td\u003e\n\u003ctd\u003e838\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315420344700,"sku":"T275","price":19.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T275_Timing_Belt_1.jpg?v=1770186220"},{"product_id":"gates-k015232xs-timing-belt-kit","title":"Gates K015232XS Timing Belt Kit","description":"\u003cp\u003eThe Gates K015232XS Timing Belt Kit is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArticle number of the recommended special tool :\u003c\/td\u003e\n\u003ctd\u003eSTT-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315422638460,"sku":"K015232XS","price":72.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_K015232XS_Timing_Belt_Kit_1.jpg?v=1770186482"},{"product_id":"gates-k015233xs-timing-belt-kit","title":"Gates K015233XS Timing Belt Kit","description":"\u003cp\u003eThe Gates K015233XS Timing Belt Kit is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315422703996,"sku":"K015233XS","price":82.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_K015233XS_Timing_Belt_Kit_1.jpg?v=1770186488"},{"product_id":"gates-k015237xs-timing-belt-kit","title":"Gates K015237XS Timing Belt Kit","description":"\u003cp\u003eThe Gates K015237XS Timing Belt Kit is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315422769532,"sku":"K015237XS","price":87.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_K015237XS_Timing_Belt_Kit_1.jpg?v=1770186494"},{"product_id":"gates-k015409xs-timing-belt-kit","title":"Gates K015409XS Timing Belt Kit","description":"\u003cp\u003eThe Gates K015409XS Timing Belt Kit is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315425063292,"sku":"K015409XS","price":87.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_K015409XS_Timing_Belt_Kit_1.jpg?v=1770186693"},{"product_id":"gates-k015480xs-timing-belt-kit","title":"Gates K015480XS Timing Belt Kit","description":"\u003cp\u003eThe Gates K015480XS Timing Belt Kit is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315426374012,"sku":"K015480XS","price":171.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_K015480XS_Timing_Belt_Kit_1.jpg?v=1770186827"},{"product_id":"gates-k015505xs-timing-belt-kit","title":"Gates K015505XS Timing Belt Kit","description":"\u003cp\u003eThe Gates K015505XS Timing Belt Kit is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315426898300,"sku":"K015505XS","price":104.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_K015505XS_Timing_Belt_Kit_1.jpg?v=1770186895"},{"product_id":"gates-k015595xs-timing-belt-kit","title":"Gates K015595XS Timing Belt Kit","description":"\u003cp\u003eThe Gates K015595XS Timing Belt Kit is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTiming Belt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315453964668,"sku":"K015595XS","price":63.09,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_K015595XS_Timing_Belt_Kit_1.jpg?v=1770187185"},{"product_id":"gates-t38009-deflection-guide-pulley-v-ribbed-belt","title":"Gates T38009 Deflection\/Guide Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T38009 Deflection\/Guide Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records with grooves, plastic construction, 80 mm outer diameter, and 17 mm inner diameter. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eDeflection\/Guide Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith grooves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of grooves :\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315514683772,"sku":"T38009","price":23.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T38009_DeflectionGuide_Pulley_V-ribbed_belt_1.jpg?v=1770191215"},{"product_id":"gates-t38016-deflection-guide-pulley-v-ribbed-belt","title":"Gates T38016 Deflection\/Guide Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T38016 Deflection\/Guide Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records with grooves, plastic construction, 80 mm outer diameter, and 17 mm inner diameter. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eDeflection\/Guide Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith grooves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of grooves :\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315514749308,"sku":"T38016","price":29.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T38016_DeflectionGuide_Pulley_V-ribbed_belt_1.jpg?v=1770191221"},{"product_id":"gates-t38030-tensioner-pulley-v-ribbed-belt","title":"Gates T38030 Tensioner Pulley, V-ribbed belt","description":"\u003cp\u003eThe Gates T38030 Tensioner Pulley, V-ribbed belt is a replacement belt-drive component that helps transmit drive between the relevant engine pulleys while maintaining the specified belt path. Its catalogue specification records with grooves, 4 number of grooves, 73 mm outer diameter, and 20.5 mm width. Match the reference, belt profile or pulley dimensions, tooth data, driven units and engine application before fitting; observe the specified tensioning and timing procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eTensioner Pulley, V-ribbed belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith grooves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of grooves :\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth [mm] :\u003c\/td\u003e\n\u003ctd\u003e20.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315515797884,"sku":"T38030","price":59.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_T38030_Tensioner_Pulley_V-ribbed_belt_1.jpg?v=1770191522"},{"product_id":"apec-cab1148-cable-pull-parking-brake","title":"Apec CAB1148 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1148 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,830 mm length 1, 1,633 mm length 2, left rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,830\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,633\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLeft Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Doors :\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317615407484,"sku":"CAB1148","price":58.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1148_Cable_Pull_parking_brake_1.jpg?v=1770385657"},{"product_id":"apec-cab1150-cable-pull-parking-brake","title":"Apec CAB1150 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1150 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,890 mm length 1, 1,690 mm length 2, right rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,890\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,690\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRight Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Doors :\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317615702396,"sku":"CAB1150","price":64.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1150_Cable_Pull_parking_brake_1.jpg?v=1770385666"},{"product_id":"apec-cab1207-cable-pull-parking-brake","title":"Apec CAB1207 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1207 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,721 mm length 1, 1,492 mm length 2, left rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,721\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,492\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLeft Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317648404860,"sku":"CAB1207","price":34.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1207_Cable_Pull_parking_brake_1.jpg?v=1770385833"},{"product_id":"apec-cab1208-cable-pull-parking-brake","title":"Apec CAB1208 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1208 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,734 mm length 1, 1,507 mm length 2, right rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,734\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,507\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRight Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317648601468,"sku":"CAB1208","price":30.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1208_Cable_Pull_parking_brake_1.jpg?v=1770385837"},{"product_id":"apec-cab1211-cable-pull-parking-brake","title":"Apec CAB1211 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1211 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,955 mm length 1, left rear fitting position, Disc Brake brake type, and 5 number of doors. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,955\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLeft Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Doors :\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317650174332,"sku":"CAB1211","price":43.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1211_Cable_Pull_parking_brake_1_57fbaffb-07b4-486c-821c-b0055841ae20.jpg?v=1770385844"},{"product_id":"apec-cab1212-cable-pull-parking-brake","title":"Apec CAB1212 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1212 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,970 mm length 1, right rear fitting position, Disc Brake brake type, and 5 number of doors. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRight Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Doors :\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317650338172,"sku":"CAB1212","price":44.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1212_Cable_Pull_parking_brake_1_e349f683-72fe-406b-917e-4a99f63e8371.jpg?v=1770385847"},{"product_id":"apec-cab1213-cable-pull-parking-brake","title":"Apec CAB1213 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1213 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,875 mm length 1, right rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,875\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRight Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317650895228,"sku":"CAB1213","price":42.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1213_Cable_Pull_parking_brake_1_5142f741-1f32-4245-b5f4-de2263ac5ab7.jpg?v=1770385851"},{"product_id":"apec-cab1214-cable-pull-parking-brake","title":"Apec CAB1214 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1214 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,845 mm length 1, left rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,845\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLeft Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317651222908,"sku":"CAB1214","price":48.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1214_Cable_Pull_parking_brake_1_583c5798-261e-41e1-be83-66cae5a5a20c.jpg?v=1770385854"},{"product_id":"apec-cab1215-cable-pull-parking-brake","title":"Apec CAB1215 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1215 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 2,265 mm length 1, 2,082 mm length 2, right rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e2,265\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e2,082\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRight Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e12.2004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317651747196,"sku":"CAB1215","price":31.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1215_Cable_Pull_parking_brake_1_ae6487c3-277c-4773-8e86-c37390f766bc.jpg?v=1770385858"},{"product_id":"apec-cab1216-cable-pull-parking-brake","title":"Apec CAB1216 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1216 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,530 mm length 1, 1,350 mm length 2, left rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,530\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLeft Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year to :\u003c\/td\u003e\n\u003ctd\u003e12.2004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317652500860,"sku":"CAB1216","price":33.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1216_Cable_Pull_parking_brake_1.jpg?v=1770385860"},{"product_id":"apec-cab1218-cable-pull-parking-brake","title":"Apec CAB1218 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1218 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,815 mm length 1, left rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLeft Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317652631932,"sku":"CAB1218","price":39.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1218_Cable_Pull_parking_brake_1_e137622f-cfa1-48cb-a673-27b4aa4f9b8d.jpg?v=1770385864"},{"product_id":"apec-cab1219-cable-pull-parking-brake","title":"Apec CAB1219 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1219 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,800 mm length 1, right rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRight Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317652828540,"sku":"CAB1219","price":38.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1219_Cable_Pull_parking_brake_1.jpg?v=1770385867"},{"product_id":"apec-cab1220-cable-pull-parking-brake","title":"Apec CAB1220 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1220 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,639 mm length 1, left rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,639\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLeft Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317653025148,"sku":"CAB1220","price":32.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1220_Cable_Pull_parking_brake_1.jpg?v=1770385871"},{"product_id":"apec-cab1221-cable-pull-parking-brake","title":"Apec CAB1221 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1221 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,701 mm length 1, right rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,701\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRight Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317653156220,"sku":"CAB1221","price":29.83,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1221_Cable_Pull_parking_brake_1.jpg?v=1770385874"},{"product_id":"apec-cab1343-cable-pull-parking-brake","title":"Apec CAB1343 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1343 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,765 mm length 1, 1,565 mm length 2, right rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,765\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,565\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eRight Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317682942332,"sku":"CAB1343","price":54.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1343_Cable_Pull_parking_brake_1_bf282fee-b069-4158-9cea-630998abc9a3.jpg?v=1770386270"},{"product_id":"apec-cab1485-cable-pull-parking-brake","title":"Apec CAB1485 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1485 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,540 mm length 1, 1,355 mm length 2, left rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,540\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,355\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLeft Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Year from :\u003c\/td\u003e\n\u003ctd\u003e01.2005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317722526076,"sku":"CAB1485","price":37.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1485_Cable_Pull_parking_brake_1.jpg?v=1770386736"},{"product_id":"apec-cab1558-cable-pull-parking-brake","title":"Apec CAB1558 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1558 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,720 mm length 1. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,720\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317903503740,"sku":"CAB1558","price":55.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1558_Cable_Pull_parking_brake_1.jpg?v=1770219738"},{"product_id":"apec-cab1575-cable-pull-parking-brake","title":"Apec CAB1575 Handbrake Cable","description":"\u003cp\u003eThe Apec CAB1575 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,655 mm length 1. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,655\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56317980934524,"sku":"CAB1575","price":34.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_CAB1575_Cable_Pull_parking_brake_1.jpg?v=1770219839"},{"product_id":"first-line-fkb1993-cable-pull-parking-brake","title":"First Line FKB1993 Handbrake Cable","description":"\u003cp\u003eThe First Line FKB1993 Handbrake Cable is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Its catalogue specification records 1,615 mm length 1, left rear fitting position, and Disc Brake brake type. It is listed in the cable Pull, parking brake product category. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCable Pull, parking brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,615\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position :\u003c\/td\u003e\n\u003ctd\u003eLeft Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Type :\u003c\/td\u003e\n\u003ctd\u003eDisc Brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FIRST LINE","offers":[{"title":"1","offer_id":56318110466428,"sku":"FKB1993","price":36.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/First_Line_FKB1993_Cable_Pull_parking_brake_1.jpg?v=1770384556"},{"product_id":"apec-adb3033-adjuster-braking-system","title":"Apec ADB3033 Adjuster, braking system","description":"\u003cp\u003eThe Apec ADB3033 Adjuster, braking system is a replacement braking-system component that forms part of the mechanism that applies or releases braking force. Confirm the reference, brake-system specification, fitting position, connections and vehicle application before fitting; installation and bleeding should follow the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eAdjuster, braking system\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"APEC","offers":[{"title":"1","offer_id":56318260937084,"sku":"ADB3033","price":27.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Apec_ADB3033_Adjuster_braking_system_1.jpg?v=1770224855"},{"product_id":"brembo-08-5803-30-brake-disc","title":"Brembo 08.5803.30 Brake Disc","description":"\u003cp\u003eThe Brembo 08.5803.30 Brake Disc is a replacement braking component that provides the rotating friction surface acted on by the pads or shoes. Its catalogue specification records solid disc construction, 10 mm brake disc thickness, 5 mounting holes, and 64 mm centering diameter. Match the reference, diameter, thickness, mounting pattern and vehicle application before fitting; braking components should be installed and checked by a competent person.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eBrake Disc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Type :\u003c\/td\u003e\n\u003ctd\u003esolid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Holes :\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith bolts\/screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e49\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCentering Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTightening Torque [Nm] :\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BREMBO","offers":[{"title":"1","offer_id":56318291870076,"sku":"08.5803.30","price":49.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Brembo_08.5803.30_Brake_Disc_1.jpg?v=1770225299"},{"product_id":"brembo-08-9139-10-brake-disc","title":"Brembo 08.9139.10 Brake Disc","description":"\u003cp\u003eThe Brembo 08.9139.10 Brake Disc is a replacement braking component that provides the rotating friction surface acted on by the pads or shoes. Its catalogue specification records solid disc construction, 10 mm brake disc thickness, 4 mounting holes, and 64 mm centering diameter. Match the reference, diameter, thickness, mounting pattern and vehicle application before fitting; braking components should be installed and checked by a competent person.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eBrake Disc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Type :\u003c\/td\u003e\n\u003ctd\u003esolid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Holes :\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith bolts\/screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCentering Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTightening Torque [Nm] :\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BREMBO","offers":[{"title":"1","offer_id":56318324343164,"sku":"08.9139.10","price":78.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Brembo_08.9139.10_Brake_Disc_1.jpg?v=1770225701"},{"product_id":"brembo-08-a147-11-brake-disc","title":"Brembo 08.A147.11 Brake Disc","description":"\u003cp\u003eThe Brembo 08.A147.11 Brake Disc is a replacement braking component that provides the rotating friction surface acted on by the pads or shoes. Its catalogue specification records solid disc construction, 9 mm brake disc thickness, 5 mounting holes, and 64 mm centering diameter. Match the reference, diameter, thickness, mounting pattern and vehicle application before fitting; braking components should be installed and checked by a competent person.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eBrake Disc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Type :\u003c\/td\u003e\n\u003ctd\u003esolid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Holes :\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith bolts\/screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCentering Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eCoated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTightening Torque [Nm] :\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BREMBO","offers":[{"title":"1","offer_id":56318341316988,"sku":"08.A147.11","price":49.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Brembo_08.A147.11_Brake_Disc_1.jpg?v=1770226082"},{"product_id":"brembo-08-a147-1x-brake-disc","title":"Brembo 08.A147.1X Brake Disc","description":"\u003cp\u003eThe Brembo 08.A147.1X Brake Disc is a replacement braking component that provides the rotating friction surface acted on by the pads or shoes. Its catalogue specification records solid and Perforated disc construction, 9 mm brake disc thickness, 5 mounting holes, and 64 mm centering diameter. Match the reference, diameter, thickness, mounting pattern and vehicle application before fitting; braking components should be installed and checked by a competent person.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eBrake Disc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Type :\u003c\/td\u003e\n\u003ctd\u003esolid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Type :\u003c\/td\u003e\n\u003ctd\u003ePerforated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Holes :\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith bolts\/screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCentering Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eCoated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e8.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTightening Torque [Nm] :\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BREMBO","offers":[{"title":"1","offer_id":56318341513596,"sku":"08.A147.1X","price":75.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Brembo_08.A147.1X_Brake_Disc_1.jpg?v=1770226089"},{"product_id":"brembo-08-a327-11-brake-disc","title":"Brembo 08.A327.11 Brake Disc","description":"\u003cp\u003eThe Brembo 08.A327.11 Brake Disc is a replacement braking component that provides the rotating friction surface acted on by the pads or shoes. Its catalogue specification records solid disc construction, 10 mm brake disc thickness, 5 mounting holes, and 64 mm centering diameter. Match the reference, diameter, thickness, mounting pattern and vehicle application before fitting; braking components should be installed and checked by a competent person.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eBrake Disc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Type :\u003c\/td\u003e\n\u003ctd\u003esolid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Holes :\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e49\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCentering Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eCoated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTightening Torque [Nm] :\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BREMBO","offers":[{"title":"1","offer_id":56318346920316,"sku":"08.A327.11","price":64.31,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Brembo_08.A327.11_Brake_Disc_1.jpg?v=1770226188"},{"product_id":"brembo-08-a871-11-brake-disc","title":"Brembo 08.A871.11 Brake Disc","description":"\u003cp\u003eThe Brembo 08.A871.11 Brake Disc is a replacement braking component that provides the rotating friction surface acted on by the pads or shoes. Its catalogue specification records solid disc construction, 10 mm brake disc thickness, 5 mounting holes, and 64 mm centering diameter. Match the reference, diameter, thickness, mounting pattern and vehicle application before fitting; braking components should be installed and checked by a competent person.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eBrake Disc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Type :\u003c\/td\u003e\n\u003ctd\u003esolid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Holes :\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith bolts\/screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCentering Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface :\u003c\/td\u003e\n\u003ctd\u003eCoated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTightening Torque [Nm] :\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BREMBO","offers":[{"title":"1","offer_id":56318355865980,"sku":"08.A871.11","price":70.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Brembo_08.A871.11_Brake_Disc_1.jpg?v=1770226467"},{"product_id":"brembo-08-b310-10-brake-disc","title":"Brembo 08.B310.10 Brake Disc","description":"\u003cp\u003eThe Brembo 08.B310.10 Brake Disc is a replacement braking component that provides the rotating friction surface acted on by the pads or shoes. Its catalogue specification records solid disc construction, 9 mm brake disc thickness, 4 mounting holes, and 61 mm centering diameter. Match the reference, diameter, thickness, mounting pattern and vehicle application before fitting; braking components should be installed and checked by a competent person.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eBrake Disc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Type :\u003c\/td\u003e\n\u003ctd\u003esolid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Disc Thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Holes :\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplementary Article\/Supplementary Info 2 :\u003c\/td\u003e\n\u003ctd\u003ewith bolts\/screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight [mm] :\u003c\/td\u003e\n\u003ctd\u003e31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCentering Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter [mm] :\u003c\/td\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum thickness [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTightening Torque [Nm] :\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BREMBO","offers":[{"title":"1","offer_id":56318357307772,"sku":"08.B310.10","price":46.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Brembo_08.B310.10_Brake_Disc_1.jpg?v=1770226532"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/collections\/HONDA-car-parts.jpg?v=1763325442","url":"https:\/\/automotopart.co.uk\/collections\/vl_honda.oembed?page=70","provider":"AutoMotoPart","version":"1.0","type":"link"}