{"title":"PEUGEOT","description":"\n\u003cp\u003ePeugeot parts identification begins with the complete vehicle build, because a model name can span several platforms and propulsion generations. Record the VIN, production date, body style, engine or electric-drive code, gearbox, driven axle and factory brake or suspension options. Then compare the fitted part number, connector, dimensions and mounting points. Registration data is useful, but imported vehicles, mid-year revisions and previous repairs need physical confirmation.\u003c\/p\u003e\n\u003cp\u003eA 208, 308, 3008, 5008 or Partner can use petrol, diesel, hybrid or battery-electric systems according to generation. Similar engine capacities may have different timing drives, turbochargers, fuel pressure, emissions hardware and oil approvals. BlueHDi diesel applications can add DPF, EGR and SCR\/AdBlue equipment; electric and plug-in models add a traction battery, inverter, motor, charger and dedicated cooling circuits.\u003c\/p\u003e\n\u003cp\u003eService fluids must follow the exact unit. Choose engine oil by viscosity and named approval, not grade alone. Manual gearboxes, dual-clutch units, torque-converter automatics, final drives and electric reduction gears have different lubricants and level procedures. Use the specified coolant technology and brake fluid, and never mix AdBlue with fuel or any workshop fluid. Contamination requires controlled repair rather than dilution.\u003c\/p\u003e\n\u003cp\u003eBrake discs and pads must match diameter, thickness, caliper, axle and wear-sensor arrangement. Springs and dampers depend on body, powertrain mass, axle load and passive or controlled damping. Partner applications require particular attention to payload specification; a passenger-model component that bolts on may not carry the same duty. Confirm wheel size, offset, bolt seat, tyre load\/speed ratings and clearance.\u003c\/p\u003e\n\u003cp\u003eDiagnose warnings before ordering. Timing noise, low oil pressure, boost loss, DPF or AdBlue faults, overheating, charging messages and suspension knocks can each have several causes. Save complete fault data, test battery supply and grounds, inspect belts or chains by the engine procedure and compare pressure, temperature and movement with reliable specifications. A code identifies the monitored condition, not automatically the failed part.\u003c\/p\u003e\n\u003cp\u003eAfter repair, restore heat shields, undertrays, ducts, clips and earth paths; use specified one-use fasteners; bleed, code and calibrate where required. Camera or radar alignment may be needed after windscreen, bumper, steering or suspension work. High-pressure fuel, timing, brake, spring and high-voltage tasks require competent control. Do not drive with brake or steering defects, severe tyre damage, overheating, fuel leakage, red warnings or exposed high-voltage damage; arrange safe recovery before UK road or MOT use.\u003c\/p\u003e","products":[{"product_id":"gates-02-1619-heater-hose","title":"Gates 02-1619 Heater Hose","description":"\u003cp\u003eThe Gates 02-1619 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 15 mm inner diameter 1, and 15 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021619\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314971685244,"sku":"02-1619","price":4.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1619_Heater_Hose_1.jpg?v=1770153214"},{"product_id":"gates-02-1622-heater-hose","title":"Gates 02-1622 Heater Hose","description":"\u003cp\u003eThe Gates 02-1622 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 18 mm inner diameter 1, and 15 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021622\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314971914620,"sku":"02-1622","price":10.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1622_Heater_Hose_1.jpg?v=1770153233"},{"product_id":"gates-02-1624-heater-hose","title":"Gates 02-1624 Heater Hose","description":"\u003cp\u003eThe Gates 02-1624 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records plastic construction, black colour, 32 mm inner diameter 1, and 21.5 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314971980156,"sku":"02-1624","price":70.63,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1624_Heater_Hose_1.jpg?v=1770153240"},{"product_id":"gates-02-1625-heater-hose","title":"Gates 02-1625 Heater Hose","description":"\u003cp\u003eThe Gates 02-1625 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 26 mm inner diameter 1, and 23 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021625\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314972045692,"sku":"02-1625","price":51.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1625_Heater_Hose_1.jpg?v=1770153247"},{"product_id":"gates-02-1644-heater-hose","title":"Gates 02-1644 Heater Hose","description":"\u003cp\u003eThe Gates 02-1644 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 31 mm inner diameter 1, and 31 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e165\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e31\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021644\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314973847932,"sku":"02-1644","price":11.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1644_Heater_Hose_1.jpg?v=1770153344"},{"product_id":"gates-02-1652-heater-hose","title":"Gates 02-1652 Heater Hose","description":"\u003cp\u003eThe Gates 02-1652 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 14 mm inner diameter 1, and 14 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e76\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021652\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314974601596,"sku":"02-1652","price":23.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1652_Heater_Hose_1.jpg?v=1770153400"},{"product_id":"gates-02-1653-heater-hose","title":"Gates 02-1653 Heater Hose","description":"\u003cp\u003eThe Gates 02-1653 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 25 mm inner diameter 1, and 25 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e720\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021653\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314974699900,"sku":"02-1653","price":21.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1653_Heater_Hose_1.jpg?v=1770153407"},{"product_id":"gates-02-1654-heater-hose","title":"Gates 02-1654 Heater Hose","description":"\u003cp\u003eThe Gates 02-1654 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 21 mm inner diameter 1, and 16 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e655\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021654\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314974765436,"sku":"02-1654","price":14.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1654_Heater_Hose_1.jpg?v=1770153414"},{"product_id":"gates-02-1658-heater-hose","title":"Gates 02-1658 Heater Hose","description":"\u003cp\u003eThe Gates 02-1658 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 35 mm inner diameter 1, and 30 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021658\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314975027580,"sku":"02-1658","price":10.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1658_Heater_Hose_1.jpg?v=1770153427"},{"product_id":"gates-02-1730-heater-hose","title":"Gates 02-1730 Heater Hose","description":"\u003cp\u003eThe Gates 02-1730 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records plastic construction, black colour, 30 mm inner diameter 1, and 20 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e850\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021730\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314977878396,"sku":"02-1730","price":62.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1730_Heater_Hose_1.jpg?v=1770153599"},{"product_id":"gates-02-1731-coolant-pipe","title":"Gates 02-1731 Coolant Pipe","description":"\u003cp\u003eThe Gates 02-1731 Coolant Pipe is a vehicle service fluid or lubricant that is intended for systems requiring the viscosity, specification or approval stated in its product data. Its catalogue specification records plastic construction, black colour, 47 mm inner diameter 1, and 32 mm inner diameter 2. Check the required specification, viscosity or concentration and fill quantity in the vehicle handbook before use; do not mix incompatible fluids and dispose of used material responsibly.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eCoolant Pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePipe length [mm] :\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021731\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314977976700,"sku":"02-1731","price":22.58,"currency_code":"GBP","in_stock":true},{"title":"2","offer_id":56314978009468,"sku":"02-1731","price":22.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1731_Coolant_Pipe_1.jpg?v=1770153609"},{"product_id":"gates-02-1732-heater-hose","title":"Gates 02-1732 Heater Hose","description":"\u003cp\u003eThe Gates 02-1732 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 17 mm inner diameter 1, and 17 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e103\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021732\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314978435452,"sku":"02-1732","price":23.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1732_Heater_Hose_1.jpg?v=1770153615"},{"product_id":"gates-02-1834-heater-hose","title":"Gates 02-1834 Heater Hose","description":"\u003cp\u003eThe Gates 02-1834 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 32.5 mm inner diameter 1, and 26 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e512\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e32.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021834\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314996916604,"sku":"02-1834","price":104.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1834_Heater_Hose_1.jpg?v=1770153918"},{"product_id":"gates-02-1842-heater-hose","title":"Gates 02-1842 Heater Hose","description":"\u003cp\u003eThe Gates 02-1842 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, 18.5 mm inner diameter 1, 18.5 mm inner diameter 2, and 15 mm inner diameter 3. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e955\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e18.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e18.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 3 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 4 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021842\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314997047676,"sku":"02-1842","price":36.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1842_Heater_Hose_1.jpg?v=1770153931"},{"product_id":"gates-02-1843-heater-hose","title":"Gates 02-1843 Heater Hose","description":"\u003cp\u003eThe Gates 02-1843 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, 20 mm inner diameter 1, 14.5 mm inner diameter 2, and 21.5 mm inner diameter 3. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e585\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e14.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 3 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 4 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021843\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314997113212,"sku":"02-1843","price":28.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1843_Heater_Hose_1.jpg?v=1770153937"},{"product_id":"gates-02-1868-heater-hose","title":"Gates 02-1868 Heater Hose","description":"\u003cp\u003eThe Gates 02-1868 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, 19 mm inner diameter 1, 15 mm inner diameter 2, and 9 mm inner diameter 3. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e960\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 3 [mm] :\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021868\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314998849916,"sku":"02-1868","price":50.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1868_Heater_Hose_1.jpg?v=1770154006"},{"product_id":"gates-02-1869-heater-hose","title":"Gates 02-1869 Heater Hose","description":"\u003cp\u003eThe Gates 02-1869 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 21 mm inner diameter 1, and 19 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021869\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314998915452,"sku":"02-1869","price":38.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1869_Heater_Hose_1.jpg?v=1770154013"},{"product_id":"gates-02-1870-heater-hose","title":"Gates 02-1870 Heater Hose","description":"\u003cp\u003eThe Gates 02-1870 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 21 mm inner diameter 1, and 15.5 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e877\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021870\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314998980988,"sku":"02-1870","price":45.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1870_Heater_Hose_1.jpg?v=1770154020"},{"product_id":"gates-02-1875-heater-hose","title":"Gates 02-1875 Heater Hose","description":"\u003cp\u003eThe Gates 02-1875 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 21 mm inner diameter 1, and 19 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e830\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021875\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314999243132,"sku":"02-1875","price":36.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1875_Heater_Hose_1.jpg?v=1770154037"},{"product_id":"gates-02-1885-heater-hose","title":"Gates 02-1885 Heater Hose","description":"\u003cp\u003eThe Gates 02-1885 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 18 mm inner diameter 1, and 15 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021885\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56314999832956,"sku":"02-1885","price":12.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1885_Heater_Hose_1.jpg?v=1770154076"},{"product_id":"gates-02-1896-heater-hose","title":"Gates 02-1896 Heater Hose","description":"\u003cp\u003eThe Gates 02-1896 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 17 mm inner diameter 1, and 16 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e740\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021896\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315000521084,"sku":"02-1896","price":17.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1896_Heater_Hose_1.jpg?v=1770154116"},{"product_id":"gates-02-1902-heater-hose","title":"Gates 02-1902 Heater Hose","description":"\u003cp\u003eThe Gates 02-1902 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 19 mm inner diameter 1, and 17 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e965\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021902\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315001667964,"sku":"02-1902","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1902_Heater_Hose_1.jpg?v=1770154137"},{"product_id":"gates-02-1924-heater-hose","title":"Gates 02-1924 Heater Hose","description":"\u003cp\u003eThe Gates 02-1924 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 15 mm inner diameter 1, and 15 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021924\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315002421628,"sku":"02-1924","price":22.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1924_Heater_Hose_1.jpg?v=1770154182"},{"product_id":"gates-02-1967-heater-hose","title":"Gates 02-1967 Heater Hose","description":"\u003cp\u003eThe Gates 02-1967 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 17 mm inner diameter 1, and 17 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e357\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e021967\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315004191100,"sku":"02-1967","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-1967_Heater_Hose_1.jpg?v=1770154282"},{"product_id":"gates-02-2111-heater-hose","title":"Gates 02-2111 Heater Hose","description":"\u003cp\u003eThe Gates 02-2111 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 19 mm inner diameter 1, and 15 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e520\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022111\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315009958268,"sku":"02-2111","price":55.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2111_Heater_Hose_1.jpg?v=1770154550"},{"product_id":"gates-02-2114-heater-hose","title":"Gates 02-2114 Heater Hose","description":"\u003cp\u003eThe Gates 02-2114 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 19 mm inner diameter 1, and 16 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e359\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022114\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315010154876,"sku":"02-2114","price":16.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2114_Heater_Hose_1.jpg?v=1770154556"},{"product_id":"gates-02-2115-heater-hose","title":"Gates 02-2115 Heater Hose","description":"\u003cp\u003eThe Gates 02-2115 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 14 mm inner diameter 1, and 12 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e595\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315010318716,"sku":"02-2115","price":14.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2115_Heater_Hose_1.jpg?v=1770154563"},{"product_id":"gates-02-2118-heater-hose","title":"Gates 02-2118 Heater Hose","description":"\u003cp\u003eThe Gates 02-2118 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 17 mm inner diameter 1, and 20 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022118\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315010384252,"sku":"02-2118","price":15.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2118_Heater_Hose_1.jpg?v=1770154569"},{"product_id":"gates-02-2175-heater-hose","title":"Gates 02-2175 Heater Hose","description":"\u003cp\u003eThe Gates 02-2175 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 20.5 mm inner diameter 1, and 20.5 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e440\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315011268988,"sku":"02-2175","price":16.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2175_Heater_Hose_1.jpg?v=1770154620"},{"product_id":"gates-02-2178-heater-hose","title":"Gates 02-2178 Heater Hose","description":"\u003cp\u003eThe Gates 02-2178 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 18 mm inner diameter 1, and 18 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e347\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315011465596,"sku":"02-2178","price":32.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2178_Heater_Hose_1.jpg?v=1770154627"},{"product_id":"gates-02-2180-heater-hose","title":"Gates 02-2180 Heater Hose","description":"\u003cp\u003eThe Gates 02-2180 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 21 mm inner diameter 1, and 21 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e387\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315011531132,"sku":"02-2180","price":19.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2180_Heater_Hose_1.jpg?v=1770154633"},{"product_id":"gates-02-2183-heater-hose","title":"Gates 02-2183 Heater Hose","description":"\u003cp\u003eThe Gates 02-2183 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 21 mm inner diameter 1, and 19 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e379\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022183\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315011694972,"sku":"02-2183","price":17.05,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2183_Heater_Hose_1.jpg?v=1770154645"},{"product_id":"gates-02-2190-heater-hose","title":"Gates 02-2190 Heater Hose","description":"\u003cp\u003eThe Gates 02-2190 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 20 mm inner diameter 1, and 20 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315011989884,"sku":"02-2190","price":34.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2190_Heater_Hose_1.jpg?v=1770154659"},{"product_id":"gates-02-2192-heater-hose","title":"Gates 02-2192 Heater Hose","description":"\u003cp\u003eThe Gates 02-2192 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 20 mm inner diameter 1, and 20 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022192\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315012088188,"sku":"02-2192","price":14.59,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2192_Heater_Hose_1.jpg?v=1770154665"},{"product_id":"gates-02-2207-heater-hose","title":"Gates 02-2207 Heater Hose","description":"\u003cp\u003eThe Gates 02-2207 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 17 mm inner diameter 1, and 15 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e390\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022207\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315012350332,"sku":"02-2207","price":13.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2207_Heater_Hose_1.jpg?v=1770154678"},{"product_id":"gates-02-2209-heater-hose","title":"Gates 02-2209 Heater Hose","description":"\u003cp\u003eThe Gates 02-2209 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 20 mm inner diameter 1, and 18 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315012514172,"sku":"02-2209","price":10.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2209_Heater_Hose_1.jpg?v=1770154684"},{"product_id":"gates-02-2212-heater-hose","title":"Gates 02-2212 Heater Hose","description":"\u003cp\u003eThe Gates 02-2212 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 21 mm inner diameter 1, and 20 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022212\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315012841852,"sku":"02-2212","price":14.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2212_Heater_Hose_1.jpg?v=1770154697"},{"product_id":"gates-02-2215-heater-hose","title":"Gates 02-2215 Heater Hose","description":"\u003cp\u003eThe Gates 02-2215 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 17 mm inner diameter 1, and 17 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e495\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022215\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315012972924,"sku":"02-2215","price":15.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2215_Heater_Hose_1.jpg?v=1770154704"},{"product_id":"gates-02-2220-heater-hose","title":"Gates 02-2220 Heater Hose","description":"\u003cp\u003eThe Gates 02-2220 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 22.5 mm inner diameter 1, and 20 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e22.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315013136764,"sku":"02-2220","price":8.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2220_Heater_Hose_1.jpg?v=1770154716"},{"product_id":"gates-02-2225-heater-hose","title":"Gates 02-2225 Heater Hose","description":"\u003cp\u003eThe Gates 02-2225 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 15 mm inner diameter 1, and 13 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022225\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315013366140,"sku":"02-2225","price":11.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2225_Heater_Hose_1.jpg?v=1770154729"},{"product_id":"gates-02-2334-heater-hose","title":"Gates 02-2334 Heater Hose","description":"\u003cp\u003eThe Gates 02-2334 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 21 mm inner diameter 1, and 21 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e779\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315013529980,"sku":"02-2334","price":39.57,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2334_Heater_Hose_1.jpg?v=1770154742"},{"product_id":"gates-02-2358-heater-hose","title":"Gates 02-2358 Heater Hose","description":"\u003cp\u003eThe Gates 02-2358 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 14 mm inner diameter 1, and 10 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e890\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022358\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315013955964,"sku":"02-2358","price":13.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2358_Heater_Hose_1.jpg?v=1770154761"},{"product_id":"gates-02-2363-heater-hose","title":"Gates 02-2363 Heater Hose","description":"\u003cp\u003eThe Gates 02-2363 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 20 mm inner diameter 1, and 15 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e1,165\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022363\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315014021500,"sku":"02-2363","price":26.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2363_Heater_Hose_1.jpg?v=1770154767"},{"product_id":"gates-02-2368-heater-hose","title":"Gates 02-2368 Heater Hose","description":"\u003cp\u003eThe Gates 02-2368 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 16 mm inner diameter 1, and 16 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022368\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315014185340,"sku":"02-2368","price":19.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2368_Heater_Hose_1.jpg?v=1770154774"},{"product_id":"gates-02-2375-heater-hose","title":"Gates 02-2375 Heater Hose","description":"\u003cp\u003eThe Gates 02-2375 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 21 mm inner diameter 1, and 19 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315014283644,"sku":"02-2375","price":10.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2375_Heater_Hose_1.jpg?v=1770154780"},{"product_id":"gates-02-2386-heater-hose","title":"Gates 02-2386 Heater Hose","description":"\u003cp\u003eThe Gates 02-2386 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 15.5 mm inner diameter 1, and 15.5 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e15.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022386\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315014709628,"sku":"02-2386","price":5.3,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2386_Heater_Hose_1.jpg?v=1770154797"},{"product_id":"gates-02-2398-heater-hose","title":"Gates 02-2398 Heater Hose","description":"\u003cp\u003eThe Gates 02-2398 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 16 mm inner diameter 1, and 16 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e420\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022398\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315015037308,"sku":"02-2398","price":10.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2398_Heater_Hose_1.jpg?v=1770154816"},{"product_id":"gates-02-2400-heater-hose","title":"Gates 02-2400 Heater Hose","description":"\u003cp\u003eThe Gates 02-2400 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 10 mm inner diameter 1, and 8 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315015201148,"sku":"02-2400","price":10.79,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2400_Heater_Hose_1.jpg?v=1770154823"},{"product_id":"gates-02-2432a-heater-hose","title":"Gates 02-2432A Heater Hose","description":"\u003cp\u003eThe Gates 02-2432A Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 9 mm inner diameter 1, and 7.5 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e890\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e7.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022432A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315016282492,"sku":"02-2432A","price":10.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2432A_Heater_Hose_1.jpg?v=1770154879"},{"product_id":"gates-02-2436-heater-hose","title":"Gates 02-2436 Heater Hose","description":"\u003cp\u003eThe Gates 02-2436 Heater Hose is a replacement engine-cooling component that forms part of the circuit that controls coolant flow, heat transfer or system pressure. Its catalogue specification records EPDM (ethylene propylene diene Monomer (M-class) rubber) construction, black colour, 20 mm inner diameter 1, and 19 mm inner diameter 2. Confirm the reference, dimensions, connections, operating specification and vehicle application before fitting; use the correct coolant and bleed the system to the vehicle manufacturer's procedure.\u003c\/p\u003e\n\u003cdiv class=\"technical-details\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction :\u003c\/td\u003e\n\u003ctd\u003eHeater Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial :\u003c\/td\u003e\n\u003ctd\u003eEPDM (ethylene propylene diene Monomer (M-class) rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour :\u003c\/td\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Length [mm] :\u003c\/td\u003e\n\u003ctd\u003e641\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 1 [mm] :\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter 2 [mm] :\u003c\/td\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e022436\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"GATES","offers":[{"title":"1","offer_id":56315016642940,"sku":"02-2436","price":40.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Gates_02-2436_Heater_Hose_1.jpg?v=1770154891"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/collections\/PEUGEOT-car-parts.jpg?v=1763325100","url":"https:\/\/automotopart.co.uk\/collections\/vl_peugeot.oembed?page=90","provider":"AutoMotoPart","version":"1.0","type":"link"}