{"title":"Workshop Equipment","description":"\n\u003cp\u003eWorkshop equipment supports lifting, holding, pressing, draining, cleaning, charging and diagnosing vehicles and components. The category can include axle stands, transmission supports, presses, work lights, creepers, oil drainers, chargers, parts washers, stools, storage and specialist service stations. Selection starts with the intended task, maximum load, working range, energy source and the environment in which the equipment will operate.\u003c\/p\u003e\n\u003cp\u003eCheck rated capacity, dimensions, stability, adjustment increments, certification or inspection requirements and compatibility with the vehicle or component. A quoted maximum load is not a target working condition and may depend on level floors, centred loading and approved adaptors. Confirm supply voltage, air pressure, fluid compatibility, ventilation and anchoring needs before purchase or installation. Accessories must be approved for the specific equipment model.\u003c\/p\u003e\n\u003cp\u003eInspect before use. Cracks, bent frames, leaking hydraulics, damaged cables, missing guards, worn locks, unreadable labels or unstable wheels mean the item should be quarantined. Hydraulic pressure can fall without visible leakage; mechanical locks or rated stands are still required where a raised load could injure someone. Never work beneath a load supported only by a jack, cylinder or hoist chain without the specified secondary support.\u003c\/p\u003e\n\u003cp\u003ePlan the work area with clear escape space, adequate lighting and separation from vehicle traffic. Wear task-appropriate PPE and control ignition, fumes, batteries, compressed air and hot fluids. Only trained people should operate lifts, presses, tyre equipment, refrigerant stations or high-voltage service tools. Do not bypass interlocks, exceed guards or improvise extensions and packing.\u003c\/p\u003e\n\u003cp\u003eFollow the manufacturer's operating, inspection and maintenance schedule, plus workplace examination duties. Position loads at defined points, raise or apply force slowly and stop if anything shifts, tilts or sounds abnormal. Release stored pressure and isolate energy before maintenance. Keep serial, inspection and repair records, use competent servicing and replace damaged safety labels. After work, lower equipment safely, clean spills and store accessories so the next user can verify a complete serviceable setup.\u003c\/p\u003e","products":[{"product_id":"workshopwarehouse-ab117n-sump-plug-washers","title":"Assorted Box of Sump Plug Washers","description":"\u003cp\u003eThe Assorted Box of Sump Plug Washers is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Workshopwarehouse reference AB117N when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eBox of 265 Pieces\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e43\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e138\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"WORKSHOPWAREHOUSE","offers":[{"title":"1","offer_id":56339483754876,"sku":"AB117N","price":46.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/AB117N.jpg?v=1771529954"},{"product_id":"ring-ril3600c-magflex-twist-250lm-led-inspection-lamp","title":"Ring Magflex Twist 250 Lumens LED Inspection Lamp","description":"\u003cp\u003eThe Ring Magflex Twist 250 Lumens LED Inspection Lamp is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Ring reference RIL3600C when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCharging: USB-C charging cable provided\u003c\/li\u003e\n\u003cli\u003eUSB-C charging cable provided\u003c\/li\u003e\n\u003cli\u003eRechargeable and cordless\u003c\/li\u003e\n\u003cli\u003eMagnet and integrated hook for hands free use\u003c\/li\u003e\n\u003cli\u003e190 lumens LED torch for precision beam\u003c\/li\u003e\n\u003cli\u003eWide angle of light output that has uniform intensity\u003c\/li\u003e\n\u003cli\u003eProduces white light similar to daylight\u003c\/li\u003e\n\u003cli\u003ePower saving mode drop light output down to 250lumens to extend battery life\u003c\/li\u003e\n\u003cli\u003eExceptional light output - COB LED provides 450 lumens\u003c\/li\u003e\n\u003cli\u003eUltimate control over lighting direction - rotates 360º and 180º ratcheting\u003c\/li\u003e\n\u003cli\u003eUSB-C charging cable included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e58\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e263\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e69\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.344\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nMulti-award winning inspection lamp that gets light exactly where you need it. A bright wide angle light output of 450 lumens and 250 lumens on power save mode makes the MAGflex Twist ideal for workshops. Lightweight, tough, and with a 360 degree rotation and 180 degree ratcheting it is the ultimate tool for directional lighting in the workshop with no compromise on light.","brand":"RING","offers":[{"title":"1","offer_id":56339894206844,"sku":"RIL3600C","price":37.4,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RIL3600C.jpg?v=1771550888"},{"product_id":"autogem-tpk01-i-sensor-metal-valve-stem-full-kit-silver","title":"i-sensor Metal Valve Stem Full Kit (Silver)","description":"\u003cp\u003eThe i-sensor Metal Valve Stem Full Kit (Silver) is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPK01 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Kit Includes All Components Required To Replace The TPMS Valve Stem\u003c\/li\u003e\n\u003cli\u003eReplaces Aged, Broken Or Corroded Valve Stems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\ni-sensor Metal Valve Stem Full Kit (Silver)","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340872429948,"sku":"TPK01","price":9.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK01.jpg?v=1771560924"},{"product_id":"autogem-tpk02203-metal-valve-stem-kit-chrysler-dodge-jeep","title":"TPMS Metal Valve Stem","description":"\u003cp\u003eThe TPMS Metal Valve Stem is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPK02203 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Kit Includes All Components Required To Replace The TPMS Valve Stem\u003c\/li\u003e\n\u003cli\u003eReplaces Aged, Broken Or Corroded Valve Stems\u003c\/li\u003e\n\u003cli\u003eReplacement Metal TPMS Valve Stem Kit\u003c\/li\u003e\n\u003cli\u003eChrysler, Dodge, Jeep \u0026amp; Lancia\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Metal Valve Stem Kit Chrysler, Dodge, Jeep \u0026amp; Lancia","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340872626556,"sku":"TPK02203","price":10.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK02203.jpg?v=1771560926"},{"product_id":"autogem-tpk03101-semi-univ-rubber-valve-ford-vaux-more","title":"TPMS Semi Universal Rubber Valve","description":"\u003cp\u003eThe TPMS Semi Universal Rubber Valve is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPK03101 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Kit Includes All Components Required To Replace The TPMS Valve Stem\u003c\/li\u003e\n\u003cli\u003eSemi Universal, Replacing Multiple OE Rubber Valve Stems\u003c\/li\u003e\n\u003cli\u003eReplacement Rubber TPMS Valve Stem\u003c\/li\u003e\n\u003cli\u003eAlfa Romeo, Citroen, Dacia, Fiat, Ford, Hyundai, Kia, Mercedes, Peugeot, Renault, Ssangyong, Subaru, Vauxhall, Volvo, US Brands \u0026amp; More\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Semi Universal Rubber Valve Alfa Romeo, Citroen, Dacia, Fiat, Ford, Hyundai, Kia, Mercedes, Peugeot, Renault, Ssangyong, Subaru, Vauxhall, Volvo, US Brands \u0026amp; More","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340872692092,"sku":"TPK03101","price":6.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK03101.jpg?v=1771560929"},{"product_id":"autogem-tpk04202-metal-valve-stem-kit-bmw-jlr-more","title":"TPMS Metal Valve Stem Kit","description":"\u003cp\u003eThe TPMS Metal Valve Stem Kit is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPK04202 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Kit Includes All Components Required To Replace The TPMS Valve Stem\u003c\/li\u003e\n\u003cli\u003eReplaces Aged, Broken Or Corroded Valve Stems\u003c\/li\u003e\n\u003cli\u003eReplacement Metal TPMS Valve Stem Kit\u003c\/li\u003e\n\u003cli\u003eBMW, Ford, Honda, JLR, Maserati, Nissan, Volvo, US Models \u0026amp; More\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Metal Valve Stem Kit BMW, Ford, Honda, JLR, Maserati, Nissan, Volvo, US Models \u0026amp; More","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340873281916,"sku":"TPK04202","price":9.84,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK04202.jpg?v=1771560931"},{"product_id":"autogem-tpk04203-metal-valve-stem-kit-hyundai-kia-more","title":"TPMS Metal Valve Stem Kit","description":"\u003cp\u003eThe TPMS Metal Valve Stem Kit is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPK04203 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Kit Includes All Components Required To Replace The TPMS Valve Stem\u003c\/li\u003e\n\u003cli\u003eReplaces Aged, Broken Or Corroded Valve Stems\u003c\/li\u003e\n\u003cli\u003eReplacement Metal TPMS Valve Stem Kit\u003c\/li\u003e\n\u003cli\u003eHyundai, Kia, Suzuki, \u0026amp; Tesla\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Metal Valve Stem Kit Hyundai, Kia, Suzuki, \u0026amp; Tesla","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340873904508,"sku":"TPK04203","price":9.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK04203.jpg?v=1771560932"},{"product_id":"autogem-tpk07201-metal-valve-stem-kit-43mm-german-prestige","title":"TPMS Metal Valve Stem Kit","description":"\u003cp\u003eThe TPMS Metal Valve Stem Kit is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records 1 minimum age. Use Autogem reference TPK07201 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 kit can cover various vehicles depending on make model \u0026amp; year of vehicle\u003c\/li\u003e\n\u003cli\u003eProduct on Application\u003c\/li\u003e\n\u003cli\u003eTPMS valves used to replace damage valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Valve Stem Kit","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340874166652,"sku":"TPK07201","price":9.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK07201.jpg?v=1771560936"},{"product_id":"autogem-tpk10008-metal-valve-stem-kit-hyundai-kia","title":"TPMS Metal Valve Stem Kit","description":"\u003cp\u003eThe TPMS Metal Valve Stem Kit is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPK10008 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Kit Includes All Components Required To Replace The TPMS Valve Stem\u003c\/li\u003e\n\u003cli\u003eReplaces Aged, Broken Or Corroded Valve Stems\u003c\/li\u003e\n\u003cli\u003eReplacement Metal TPMS Valve Stem Kit\u003c\/li\u003e\n\u003cli\u003eHyundai \u0026amp; Kia\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Metal Valve Stem Kit Hyundai \u0026amp; Kia","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340874527100,"sku":"TPK10008","price":10.08,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK10008.jpg?v=1771560938"},{"product_id":"autogem-tpk14201-metal-valve-stem-kit-merc-vaux-more","title":"TPMS Metal Valve Stem Kit","description":"\u003cp\u003eThe TPMS Metal Valve Stem Kit is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPK14201 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Kit Includes All Components Required To Replace The TPMS Valve Stem\u003c\/li\u003e\n\u003cli\u003eReplaces Aged, Broken Or Corroded Valve Stems\u003c\/li\u003e\n\u003cli\u003eReplacement Metal TPMS Valve Stem Kit\u003c\/li\u003e\n\u003cli\u003eBMW, Maserati, Mercedes, Vauxhall, Rolls Royce \u0026amp; More\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Metal Valve Stem Kit BMW, Maserati, Mercedes, Vauxhall, Rolls Royce \u0026amp; More","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340874822012,"sku":"TPK14201","price":9.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK14201.jpg?v=1771560941"},{"product_id":"autogem-tpk16101-rubber-valve-mitsubishi-nissan-more","title":"TPMS Rubber Valve","description":"\u003cp\u003eThe TPMS Rubber Valve is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records 1 minimum age. Use Autogem reference TPK16101 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 kit can cover various vehicles depending on make model \u0026amp; year of vehicle\u003c\/li\u003e\n\u003cli\u003eProduct on Application\u003c\/li\u003e\n\u003cli\u003eTPMS valves used to replace damage valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Valve Stem Kit","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340874920316,"sku":"TPK16101","price":7.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK16101.jpg?v=1771560942"},{"product_id":"autogem-tpk21101-rubber-valve-mercedes-nissan-more","title":"TPMS Rubber Valve","description":"\u003cp\u003eThe TPMS Rubber Valve is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records 1 minimum age. Use Autogem reference TPK21101 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 kit can cover various vehicles depending on make model \u0026amp; year of vehicle\u003c\/li\u003e\n\u003cli\u003eProduct on Application\u003c\/li\u003e\n\u003cli\u003eTPMS valves used to replace damage valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Valve Stem Kit","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340875247996,"sku":"TPK21101","price":9.92,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK21101.jpg?v=1771560944"},{"product_id":"autogem-tpk401n-nickel-plated-valve-cores-100pcs","title":"Nickel Plated Valve Cores 100pcs","description":"\u003cp\u003eThe Nickel Plated Valve Cores 100pcs is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPK401N when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNickel Plating Avoids Corrosion Commonly Assoicated With Brass Valve Cores\u003c\/li\u003e\n\u003cli\u003eIdeal Replacement For Lost Or Damaged Valve Cores\u003c\/li\u003e\n\u003cli\u003eValve Cores Specifically Designed To Avoid Internal Corrosion Of Aluminium TPMS Valve Stems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.08\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nNickel Plated Valve Cores 100pcs","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340876263804,"sku":"TPK401N","price":10.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK401N.jpg?v=1771560944"},{"product_id":"autogem-tpk403-tpms-valve-caps-plastic-100pcs","title":"TPMS Valve Caps (Plastic) 100pcs","description":"\u003cp\u003eThe TPMS Valve Caps (Plastic) 100pcs is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPK403 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional Seal Within Cap To Protect Valve Against Contaminants\u003c\/li\u003e\n\u003cli\u003eIdeal Replacement For Lost Or Damaged Valve Caps\u003c\/li\u003e\n\u003cli\u003eValve Caps Specifically Designed To Seal \u0026amp; Protect TPMS Valve Stems Without Corrosion \/ Seizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS Valve Caps (Plastic) 100pcs","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340876427644,"sku":"TPK403","price":12.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPK403.jpg?v=1771560946"},{"product_id":"autogem-tpt14-tpms-hand-tool-kit","title":"TPMS Hand Tool Kit 12pc","description":"\u003cp\u003eThe TPMS Hand Tool Kit 12pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Autogem reference TPT14 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic Carry Case With Foam Inlay\u003c\/li\u003e\n\u003cli\u003eIncludes Product Identification \u0026amp; Help Guide\u003c\/li\u003e\n\u003cli\u003eFit \u0026amp; Remove TPMS Components With Ease\u003c\/li\u003e\n\u003cli\u003eSpecialist TPMS Hand Tools Kit To Cover All Bases When Fitting \u0026amp; Removing Sensors\u003c\/li\u003e\n\u003cli\u003eIncludes Low Limit Torque Wrench, TPMS Sealing Grommet Removal \u0026amp; Fitting Tool, Pre-Torqued Valve Core Tool, 11mm \u0026amp; 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.09\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n12 Pc TPMS Hand Tool Kit Includes Low Limit Torque Wrench, TPMS Sealing Grommet Removal \u0026amp; Fitting Tool, Pre-Torqued Valve Core Tool, 11mm \u0026amp; 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56340876624252,"sku":"TPT14","price":94.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPT14.jpg?v=1771560957"},{"product_id":"cougar-cr2-2-tonne-ramp-standard-pair","title":"Standard Car Ramp - 2 Tonne - Pair","description":"\u003cp\u003eThe Standard Car Ramp - 2 Tonne - Pair is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Cougar reference CR2 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: L 810mm x W 245mm (Width of platform only: 180mm) x H 250mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9.5kg\u003c\/li\u003e\n\u003cli\u003ePair of Blue Ramps with 2000kg\/pair capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003ePair of Blue Ramps with 2000kg\/pair capacity\u003c\/li\u003e \u003cli\u003eWeight: 9.5kg\u003c\/li\u003e \u003cli\u003eDimensions: L 810mm x W 245mm (Width of platform only: 180mm) x H 250mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e810\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"COUGAR","offers":[{"title":"1","offer_id":56341934834044,"sku":"CR2","price":41.94,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CR2.jpg?v=1771537390"},{"product_id":"cougar-rm1-ramp-extensions","title":"Car Ramp Extensions - Pair","description":"\u003cp\u003eThe Car Ramp Extensions - Pair is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records For use with Cougar Ramps for vehicles with low ground clearance technical info. Use Cougar reference RM1 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCar ramp extension\u003c\/li\u003e\n\u003cli\u003eUseable with either cougar car ramp\u003c\/li\u003e\n\u003cli\u003eFor use with Cougar Ramps for vehicles with low ground clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eFor use with Cougar Ramps for vehicles with low ground clearance\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"COUGAR","offers":[{"title":"1","offer_id":56341934932348,"sku":"RM1","price":17.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/RM1.jpg?v=1771550950"},{"product_id":"laser-4707a-consumables-welding-device","title":"Aluminium Repair System","description":"\u003cp\u003eThe Aluminium Repair System is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Laser reference 4707A when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be used with standard heat source\u003c\/li\u003e\n\u003cli\u003eComplete with tinning brush \u0026amp; 5 aluminium rods\u003c\/li\u003e\n\u003cli\u003eThis product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals\u003c\/li\u003e\n\u003cli\u003eUsing a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e465\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.172\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"LASER","offers":[{"title":"1","offer_id":56342251012476,"sku":"4707A","price":45.28,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4707A.jpg?v=1771522972"},{"product_id":"gys-024588-1524-intel-charger-12v-24v","title":"Batium 15.24 Smart Charger","description":"\u003cp\u003eThe Batium 15.24 Smart Charger is a battery charging, support or diagnostic product that is designed for the battery voltage and operating mode stated in its product data. Use Gys reference 024588 when cross-checking the part. Confirm the supported battery chemistry, voltage, current range, lead connections and operating instructions before use; provide ventilation and observe battery polarity and eye-protection precautions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSafe for all types of Lead Acid batteries even when the type is unknown\u003c\/li\u003e\n\u003cli\u003eThe Batium 15.24 will not deliver current if there is no battery detected (no voltage in the clamps).\u003c\/li\u003e\n\u003cli\u003eAnti-spark feature which prevents sparks whilst connecting the Gysflash to the battery.\u003c\/li\u003e\n\u003cli\u003eProtected against short-circuits, polarity reversals and vehicle start\u003c\/li\u003e\n\u003cli\u003eSOS recovery GO \u0026gt;0.5V\u003c\/li\u003e\n\u003cli\u003eThe BATIUM range is a microprocessor-controlled smart charger, it constantly analyses the battery's condition and regulates the charging process accordingly.\u003c\/li\u003e\n\u003cli\u003eFull charge and 100% charge level maintenance.\u003c\/li\u003e\n\u003cli\u003eCharges 50% faster than a traditional charger.\u003c\/li\u003e\n\u003cli\u003eCan be used on batteries for motorcycles, collector's vehicles, light vehicles, vans, agricultural machinery, public works vehicles, heavy goods vehicles and buses from 35 to 225 Ah.\u003c\/li\u003e\n\u003cli\u003eProtection of on-board electronics.\u003c\/li\u003e\n\u003cli\u003eRecovery of heavily discharged batteries (from 2 V).\u003c\/li\u003e\n\u003cli\u003eAutomatic charger for all types of lead-acid batteries (Gel, liquid, AGM, VRLA) 6\/12\/24V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ecert024588 (1).pdf\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e143\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e362\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nAutomatic charger for all types of lead-acid batteries (gel, liquid, AGM, VRLA) 6\/12\/24 V. Can be used for batteries on motorcycles, collector's vehicles, light vehicles, vans, agricultural machinery, public works vehicles, heavy goods vehicles and buses from 35 to 225 Ah.","brand":"GYS","offers":[{"title":"1","offer_id":56342253830524,"sku":"024588","price":217.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/024588.jpg?v=1771519300"},{"product_id":"gys-026339-truck-booster-pack-12-24v","title":"Startpack Truck Booster Pack 12V\/24V LGV's","description":"\u003cp\u003eThe Startpack Truck Booster Pack 12V\/24V LGV's is a battery charging, support or diagnostic product that is designed for the battery voltage and operating mode stated in its product data. Use Gys reference 026339 when cross-checking the part. Confirm the supported battery chemistry, voltage, current range, lead connections and operating instructions before use; provide ventilation and observe battery polarity and eye-protection precautions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides a 12 V DC power supply\u003c\/li\u003e\n\u003cli\u003eFitted with an LED lighting system\u003c\/li\u003e\n\u003cli\u003eCan be left permanently connected to the mains system (the GYSPACK needs to be charged after every use)\u003c\/li\u003e\n\u003cli\u003eBattery can be charged to 100% maxmising its service life and efficiency\u003c\/li\u003e\n\u003cli\u003eAutomatic, 230 V (12 V floating) charger\u003c\/li\u003e\n\u003cli\u003eEquipped with an easily replaceable external fuse (replacement fuse included)\u003c\/li\u003e\n\u003cli\u003eON\/OFF switch to prevent misuse\u003c\/li\u003e\n\u003cli\u003eA built-in battery tester to view the charge status of both internal batteries.\u003c\/li\u003e\n\u003cli\u003eAlarm system in instances of reversed polarity\u003c\/li\u003e\n\u003cli\u003eCopper cables (2 x 1.80 m, ø 25 mm²) with isolated, 600 A clamps\u003c\/li\u003e\n\u003cli\u003e24V : 1600 Peak amps \/ 1300A Cranking (CC)\u003c\/li\u003e\n\u003cli\u003e12V : 3200 Peak amps \/ 1450A Cranking (CC)\u003c\/li\u003e\n\u003cli\u003eStarts instantly\u003c\/li\u003e\n\u003cli\u003e2-in-1 : 12 and 24 V starter and power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ecert026339 (2).pdf\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e225\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e19.42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n2-in-1: Stand-alone starter for 12 V and 24 V lead acid battery and 12 V stabilized power supply. Instantly starts cars, campers and LGV vehicles","brand":"GYS","offers":[{"title":"1","offer_id":56342257303932,"sku":"026339","price":490.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/026339.jpg?v=1771519305"},{"product_id":"carlyle-hand-tools-nj1224v-3400a-12v-24v-jump-starter","title":"Heavy-duty 12\/24 Volt Jump Starter and Power Supply","description":"\u003cp\u003eThe Heavy-duty 12\/24 Volt Jump Starter and Power Supply is a battery charging, support or diagnostic product that is designed for the battery voltage and operating mode stated in its product data. Its catalogue specification records UKCA and CE Certified\/Charger Meets UL1236 technical info and 1 minimum age. Use Carlyle hand tools reference NJ1224V when cross-checking the part. Confirm the supported battery chemistry, voltage, current range, lead connections and operating instructions before use; provide ventilation and observe battery polarity and eye-protection precautions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLV \u0026amp; CV Compatible (NJ1224V), including HGVs, Trucks, Camper Vans \u0026amp; Vans\u003c\/li\u003e\n\u003cli\u003eCranking Amps: 700A (NJ12V), 450-850A(NJ1224V)\u003c\/li\u003e\n\u003cli\u003eCharging Time from 2 to 10 Hours* (Depends on battery status)\u003c\/li\u003e\n\u003cli\u003eDC Outlet to Power Accessories\u003c\/li\u003e\n\u003cli\u003eBuilt-in Automatic Charger\u003c\/li\u003e\n\u003cli\u003eVoltmeter provides charge status of onboard battery\u003c\/li\u003e\n\u003cli\u003eIndustrial Grade HotJaw Clamps Penetrate Battery Corrosion\u003c\/li\u003e\n\u003cli\u003e116cm #2 AWG Cable Leads for Added Reach\u003c\/li\u003e\n\u003cli\u003eJump Starts Petrol Engine Up to 10L, Diesel Engine Up to 8L(NJ12V)\/10L(NJ1224V)\u003c\/li\u003e\n\u003cli\u003eSealed AGM Battery Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eUKCA and CE Certified\/Charger Meets UL1236\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e422\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e18.14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThis heavy-duty 12\/24V jump starter delivers 3400 Peak Amps and 600 Cranking Amps of starting power in 12V mode, enough to spin the starters on a wide variety of commercial trucks, agricultural equipment, diesel powered boats and more. Plus, its dual high performance batteries satisfy the most aggressive portable power demands. Convenient as it is powerful, its built-in automatic charger can provide up to 24 Hour\/365 Day continuous charging and its quick connect voltage selection system makes it easy to change from 12V to 24V operation and back again.","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342261301628,"sku":"NJ1224V","price":229.98,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/NJ1224.jpg?v=1771546769"},{"product_id":"carlyle-hand-tools-nj12v-2000a-12v-jump-starter","title":"Heavy-duty 12 Volt Jump Starter and Power Supply","description":"\u003cp\u003eThe Heavy-duty 12 Volt Jump Starter and Power Supply is a battery charging, support or diagnostic product that is designed for the battery voltage and operating mode stated in its product data. Its catalogue specification records UKCA and CE Certified\/Charger Meets UL1236 technical info and 1 minimum age. Use Carlyle hand tools reference NJ12V when cross-checking the part. Confirm the supported battery chemistry, voltage, current range, lead connections and operating instructions before use; provide ventilation and observe battery polarity and eye-protection precautions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLV \u0026amp; CV Compatible (NJ1224V), including HGVs, Trucks, Camper Vans \u0026amp; Vans\u003c\/li\u003e\n\u003cli\u003eCranking Amps: 700A (NJ12V), 450-850A(NJ1224V)\u003c\/li\u003e\n\u003cli\u003eCharging Time from 2 to 10 Hours* (Depends on battery status)\u003c\/li\u003e\n\u003cli\u003eDC Outlet to Power Accessories\u003c\/li\u003e\n\u003cli\u003eBuilt-in Automatic Charger\u003c\/li\u003e\n\u003cli\u003eVoltmeter provides charge status of onboard battery\u003c\/li\u003e\n\u003cli\u003eIndustrial Grade HotJaw Clamps Penetrate Battery Corrosion\u003c\/li\u003e\n\u003cli\u003e116cm #2 AWG Cable Leads for Added Reach\u003c\/li\u003e\n\u003cli\u003eJump Starts Petrol Engine Up to 10L, Diesel Engine Up to 8L(NJ12V)\/10L(NJ1224V)\u003c\/li\u003e\n\u003cli\u003eSealed AGM Battery Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eUKCA and CE Certified\/Charger Meets UL1236\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e422\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e16.68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThis heavy-duty 12V jump starter delivers 2000 Peak Amps and 600 Cranking Amps of starting power, enough to spin the starters on a wide variety of commercial trucks, agricultural equipment, diesel powered boats and more. Plus, its high capacity battery satisfies the most aggressive portable power demands. Convenient as it is powerful, its built-in automatic charger can provide up to 24 Hour\/365 Day continuous charging.","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342261662076,"sku":"NJ12V","price":158.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/NJ12V.jpg?v=1771546771"},{"product_id":"gys-025967-gysflash-101-24-h7","title":"GYSflash 101.24 Battery Support Unit 5M Cables","description":"\u003cp\u003eThe GYSflash 101.24 Battery Support Unit 5M Cables is a battery charging, support or diagnostic product that is designed for the battery voltage and operating mode stated in its product data. Use Gys reference 025967 when cross-checking the part. Confirm the supported battery chemistry, voltage, current range, lead connections and operating instructions before use; provide ventilation and observe battery polarity and eye-protection precautions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible Voltage, the charger operates with a supply voltage between 85 and 265 V\u003c\/li\u003e\n\u003cli\u003eExtends the life and performance of Lead (gel, AGM, liquid, calcium, etc.) and Lithium (LFP) batteries.\u003c\/li\u003e\n\u003cli\u003eConnect additional modules (printer, barcode reader, etc.)\u003c\/li\u003e\n\u003cli\u003eAdd, delete or modify charging modes and profiles via USB\u003c\/li\u003e\n\u003cli\u003eTemperature sensor to prevent internal electronics overheating.\u003c\/li\u003e\n\u003cli\u003eProtects the on-board electronics of the vehicle: short circuit, reverse polarity and overload protection. Spark prevention system.\u003c\/li\u003e\n\u003cli\u003eTester mode\u003c\/li\u003e\n\u003cli\u003eBattery change mode\u003c\/li\u003e\n\u003cli\u003eCharging mode\u003c\/li\u003e\n\u003cli\u003ePower supply mode\u003c\/li\u003e\n\u003cli\u003eShowroom mode\u003c\/li\u003e\n\u003cli\u003eConnectivity (CNT) - Fully updatable and futureproof\u003c\/li\u003e\n\u003cli\u003eHigh-power multifunction stabilized power supply for lead-acid batteries (sealed, liquid, AGM, etc.) or Lithium (LiFePO4)\u003c\/li\u003e\n\u003cli\u003e100A Battery support unit\u003c\/li\u003e\n\u003cli\u003eTesla 16V capable (12\/16\/24V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ecert025967.pdf\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e385\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e10.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe GYSFLASH 101.24 CNT FV is a 100 A high power CONNECTED charger with inverter technology. It allows to keep a 6 V, 12 V, 16 V and 24 V lead or lithium battery (Lithium-ion «standard» + Lithium-iron Phosphate) at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its USB connectivity makes it 100% customizable.","brand":"GYS","offers":[{"title":"1","offer_id":56342263071100,"sku":"025967","price":1210.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/025967.jpg?v=1771519304"},{"product_id":"bosch-0687000044-bat-6120-battery-support-unit","title":"BAT 6120 Battery Support Unit","description":"\u003cp\u003eThe BAT 6120 Battery Support Unit is a battery charging, support or diagnostic product that is designed for the battery voltage and operating mode stated in its product data. Use Bosch reference 0687000044 when cross-checking the part. Confirm the supported battery chemistry, voltage, current range, lead connections and operating instructions before use; provide ventilation and observe battery polarity and eye-protection precautions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy access to BAT 6120 Help Center web page through QR code displayed on the screen\u003c\/li\u003e\n\u003cli\u003eEasy to use large 4 colour backlight LCD display including wall mount mode\u003c\/li\u003e\n\u003cli\u003eFits underneath a car in show room\u003c\/li\u003e\n\u003cli\u003eDesk, floor or wall operations possible\u003c\/li\u003e\n\u003cli\u003eFlexible operation modes to fulfill customer needs\u003c\/li\u003e\n\u003cli\u003eMaximum power output: up to 1750 W\u003c\/li\u003e\n\u003cli\u003eInterface available in 26 languages\u003c\/li\u003e\n\u003cli\u003e12 V Lead Acid Battery Charge. Charging Diagnosis \/ 12 V Lithium Battery Charge, Wake Up\u003c\/li\u003e\n\u003cli\u003eSupports Flooded\/AGM\/EFB\/GEL\/Lithium (LFP) Batteries\u003c\/li\u003e\n\u003cli\u003eSupports 120 A DC Continuous Output (AC120 V - 240 V, 25 degree Celcius)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eDimensions (W x H x D): 329 x 116 x 433 mm\u003c\/li\u003e \u003cli\u003eProtection type (DIN 40050): IP 20 D \u003c\/li\u003e \u003cli\u003eBattery nominal voltage: 12 V\u003c\/li\u003e \u003cli\u003eMain voltage: 220 - 240 V, 50\/60 Hz\u003c\/li\u003e \u003cli\u003eFunction temperature range: 0 – 40 degree(C)\u003c\/li\u003e \u003cli\u003e Max. 120 A continuous current\u003c\/li\u003e \u003cli\u003eFloating-mode operation: 12.0 V - 13.2 V adjustable, default 13.5 V\u003c\/li\u003e \u003cli\u003eBackup mode: 12.0 V - 13.2 V adjustable, default 12.6 V \/ 10 A - 30 A adjustable power limit, default 20 A\u003c\/li\u003e \u003cli\u003eCharging characteristic: up to 120 Amperes continuous. Battery types: UNI, WET, EFB, AGM, VRLA\/GEL, LFP (LiFePO4)\u003c\/li\u003e \u003cli\u003eWeight (without charging and power cable): 8.5 kg\u003c\/li\u003e \u003cli\u003ePower input :120 - 240 V AC\u003c\/li\u003e \u003cli\u003eCross-section charging cable: 25 mm sq.\u003c\/li\u003e \u003cli\u003eLength of the charging cable: 3 m (twin cable)\u003c\/li\u003e \u003cli\u003eMax. Charge current intensity 12V: 120 A\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e559\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e329\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e439\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e12.579\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe Bosch BAT 6120 is a future-proof, professional, two-in-one battery support solution for automotive workshops. Functioning dependably as a smart and fast battery charger, for lead acid and lithium batteries, or as a 120 A continuous power supply.","brand":"BOSCH","offers":[{"title":"1","offer_id":56342263824764,"sku":"0687000044","price":1475.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/0687000044.jpg?v=1771519685"},{"product_id":"gys-024199-pbt-550-battery-tester","title":"PBT550 Battery tester - Stop\/Start","description":"\u003cp\u003eThe PBT550 Battery tester - Stop\/Start is a battery charging, support or diagnostic product that is designed for the battery voltage and operating mode stated in its product data. Use Gys reference 024199 when cross-checking the part. Confirm the supported battery chemistry, voltage, current range, lead connections and operating instructions before use; provide ventilation and observe battery polarity and eye-protection precautions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProtected against polarity reversa\u003c\/li\u003e\n\u003cli\u003eLarge LCD backlit display\u003c\/li\u003e\n\u003cli\u003eUltra-fast (\u0026lt; 1 sec) and highly accurate\u003c\/li\u003e\n\u003cli\u003ePrintable test reports with date and time\u003c\/li\u003e\n\u003cli\u003eCharge state and battery health (%)\u003c\/li\u003e\n\u003cli\u003eAvailable starting power\u003c\/li\u003e\n\u003cli\u003eBattery voltage (6 V to 20 V)\u003c\/li\u003e\n\u003cli\u003eNo internal battery, will power up using the vehicle battery.\u003c\/li\u003e\n\u003cli\u003ePrint-out of the results using integrated thermal printer (no ink required).\u003c\/li\u003e\n\u003cli\u003eSpecial feature to test the internal resistance of the battery.\u003c\/li\u003e\n\u003cli\u003eAlternator 12 V : Tests the no load voltage and charging voltage as well as current undulation during the charge.\u003c\/li\u003e\n\u003cli\u003eStarter 12 V : Tests the start voltage.\u003c\/li\u003e\n\u003cli\u003eBattery 12 V : Tests of the voltage level and state of charge.\u003c\/li\u003e\n\u003cli\u003eSTART \/ STOP batteries (EFB\/AGM)\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple types of lead-acid battery ranging from 30 to 220 Ah\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ecert024199.pdf\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nProfessional battery tester providing highly-accurate results and with in-built printer.","brand":"GYS","offers":[{"title":"1","offer_id":56342264119676,"sku":"024199","price":204.2,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/024199.jpg?v=1771519288"},{"product_id":"bosch-0684010050-fsa-050-hybrid-tester","title":"FSA 050 Hybrid Tester","description":"\u003cp\u003eThe FSA 050 Hybrid Tester is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Bosch reference 0684010050 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWireless connectivity: Conntect with Bosch Connected Repair or other workshop networks to help you work more efficiently\u003c\/li\u003e\n\u003cli\u003eComplete with storage case, two measuring cables, high-voltage probe, CD\/DVD CompacSoft[plus] and Bluetooth USB stick: It’s the economical package for testing electrical drive systems\u003c\/li\u003e\n\u003cli\u003eBluetooth interface: Ultimate convenience – wirelessly transmit test results to workshop PC or FSA series\u003c\/li\u003e\n\u003cli\u003eLightweight (0.8 kg): The mobile solution around the workshop\u003c\/li\u003e\n\u003cli\u003eCompact (220 x 110 x 65 mm): Handy size for efficient working\u003c\/li\u003e\n\u003cli\u003eCombines as a test module with FSA 500: Enhance functionality and output to comprehensively document measurement test results\u003c\/li\u003e\n\u003cli\u003eStandalone tester: Get fast results with insulation and high-voltage testing for electric and hybrid drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eHigh-voltage analysis:\tup to 600 V (TRMS)\u003c\/li\u003e \u003cli\u003eInsulation analysis:until 200 G Ω\u003c\/li\u003e \u003cli\u003eInsulation resistance: 50 - 100 - 250 - 500 - 1 000 V\u003c\/li\u003e \u003cli\u003eTest voltages: 1 mA\u003c\/li\u003e \u003cli\u003eTest current Measurement modes: t, PI, DAR\u003c\/li\u003e \u003cli\u003eResistance measurement: 0.01 - 1 000 kOhm\u003c\/li\u003e \u003cli\u003eContinuity testing: 0.01 - 99.9 Ohm with test current 20 mA \/ 205 mA\u003c\/li\u003e \u003cli\u003eCapacitance measurement: 100 picofarad - 10 microfarad\u003c\/li\u003e \u003cli\u003eData transmission: Bluetooth class I (up to 30 m range)\u003c\/li\u003e \u003cli\u003ePower supply: Batteries 5x IEC LR6 (AA)\u003c\/li\u003e \u003cli\u003eOperating temperature range -20 - 55 degree(C)\u003c\/li\u003e \u003cli\u003eWeight: 0.8 kg\u003c\/li\u003e \u003cli\u003eDimensions: 220 x 92 x 50 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e489\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e129\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e389\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.58\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe FSA 050 high-voltage multimeter tests all electrical drive systems and is the fast and convenient way to competently troubleshoot faults with electric and hybrid vehicles. With the handy FSA 050 in your workshop, you’ll be up-to-date and prepared for the trend towards electrical drives.","brand":"BOSCH","offers":[{"title":"1","offer_id":56342264709500,"sku":"0684010050","price":1531.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/0684010050.jpg?v=1771519683"},{"product_id":"topdon-artidiagpro-artidiag-pro-2yr-free-subs","title":"Artidiag Pro (2YR Free Subs)","description":"\u003cp\u003eThe Artidiag Pro (2YR Free Subs) is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records 1 minimum age. Use Topdon reference ARTIDIAGPRO when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e31 maintenance services for major vehicle models\u003c\/li\u003e\n\u003cli\u003eActuation testing (Bi-directional control)\u003c\/li\u003e\n\u003cli\u003eSupport ECU coding for modification\u003c\/li\u003e\n\u003cli\u003eFull-system diagnostics for engine, transmission, airbag, etc.\u003c\/li\u003e\n\u003cli\u003eBasic full-system diagnostic functions: ECU lookups, read \u0026amp; clear fault codes, etc.\u003c\/li\u003e\n\u003cli\u003eAutoVIN for automatic vehicle identification\u003c\/li\u003e\n\u003cli\u003eAutomatic generation of diagnostic reports for printing or sharing via email\u003c\/li\u003e\n\u003cli\u003e2 Years free upgrade\u003c\/li\u003e\n\u003cli\u003eMultilingual Support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eDisplay: 7-Inch LCD, 1024 x 600 pixels OS: Android 7.0 RAM: 2G, ROM 32G Battery: 6100 mAh\/3.8V Operating Voltage: 9~18V\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e420\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nARTIDIAG PRO (2YR FREE SUBS)","brand":"TOPDON","offers":[{"title":"1","offer_id":56342265266556,"sku":"ARTIDIAGPRO","price":414.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TD52110019.jpg?v=1771532421"},{"product_id":"carlyle-hand-tools-cbft180-boiling-point-brake-fluid-tester","title":"Boiling Point Brake Fluid Tester","description":"\u003cp\u003eThe Boiling Point Brake Fluid Tester is a vehicle service fluid or lubricant that is intended for systems requiring the viscosity, specification or approval stated in its product data. Its catalogue specification records UKCA\/CE\/EMC approved\/RoHS compliant technical info. Use Carlyle hand tools reference CBFT180 when cross-checking the part. Check the required specification, viscosity or concentration and fill quantity in the vehicle handbook before use; do not mix incompatible fluids and dispose of used material responsibly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBacklit LCD screen\u003c\/li\u003e\n\u003cli\u003eAvailable in 19 self-selectable languages\u003c\/li\u003e\n\u003cli\u003eOperating Voltage - 12V\u003c\/li\u003e\n\u003cli\u003eTest Time - 30 seconds\u003c\/li\u003e\n\u003cli\u003eMax Temperature - 320°C\u003c\/li\u003e\n\u003cli\u003eBrake Fluid Compatibility - DOT3, DOT4, DOT4+, DOT5.1\u003c\/li\u003e\n\u003cli\u003eAccurate, reliable and repeatable results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eUKCA\/CE\/EMC approved\/RoHS compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nCarlyle Brake Fluid Boiling Point Tester","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342265561468,"sku":"CBFT180","price":321.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CBFT180_1.jpg?v=1771535817"},{"product_id":"topdon-td52110355-topscan-pro-1yr-free-subs","title":"Topscan Pro (1YR Free Subs)","description":"\u003cp\u003eThe Topscan Pro (1YR Free Subs) is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records 1 minimum age. Use Topdon reference TD52110355 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull System Diagnosis for 70+ Brands\u003c\/li\u003e\n\u003cli\u003eDTC Repair Guide\u003c\/li\u003e\n\u003cli\u003e10 modes of OBD2 testing free for life\u003c\/li\u003e\n\u003cli\u003eBi-Directional Control\u003c\/li\u003e\n\u003cli\u003eMulti-Dimensional Data Display\u003c\/li\u003e\n\u003cli\u003eAutoVIN \u0026amp; AutoScan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eBluetooth: 5.0 (connection range: 33 feet\/10m)\u003c\/li\u003e \u003cli\u003e Support mobile devices running on Android 7.0 or above\/iOS 11.0 or above 7 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTOPSCAN PRO (1YR FREE SUBS)","brand":"TOPDON","offers":[{"title":"1","offer_id":56342266741116,"sku":"TD52110355","price":142.15,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TD52110355.jpg?v=1771560804"},{"product_id":"topdon-topscanpro-topscan-pro-1yr-free-subs","title":"Topscan Pro (1YR Free Subs)","description":"\u003cp\u003eThe Topscan Pro (1YR Free Subs) is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records 1 minimum age. Use Topdon reference TOPSCANPRO when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull System Diagnosis for 70+ Brands\u003c\/li\u003e\n\u003cli\u003eDTC Repair Guide\u003c\/li\u003e\n\u003cli\u003e10 modes of OBD2 testing free for life\u003c\/li\u003e\n\u003cli\u003eBi-Directional Control\u003c\/li\u003e\n\u003cli\u003eMulti-Dimensional Data Display\u003c\/li\u003e\n\u003cli\u003eAutoVIN \u0026amp; AutoScan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eBluetooth: 5.0 (connection range: 33 feet\/10m)\u003c\/li\u003e \u003cli\u003e Support mobile devices running on Android 7.0 or above\/iOS 11.0 or above 7 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTOPSCAN PRO (1YR FREE SUBS)","brand":"TOPDON","offers":[{"title":"1","offer_id":56342267199868,"sku":"TOPSCANPRO","price":79.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TD52110355_8d16a856-fd70-48f2-ad2c-4f187d7e16e9.jpg?v=1771560920"},{"product_id":"bosch-1684465914-tpms-obd-interface-module","title":"Bosch OBD Interface Module","description":"\u003cp\u003eThe Bosch OBD Interface Module is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Bosch reference 1684465914 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOBD Module simplifies the workflow significantly when it is needed (mainly Asian OEMs such as Toyota, Hyundai, Nissan), reduces manual data entry of long sensor codes\u003c\/li\u003e\n\u003cli\u003eWriting sensor values can also be done using the ESI[tronic] – but the dongle is faster, since there is no typing required\u003c\/li\u003e\n\u003cli\u003eWrites sensor values into ECU of vehicle as integrated part of the process\u003c\/li\u003e\n\u003cli\u003eKit with LAN cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.539\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe OBD Interface Module is an optional add on to enhance your ability to perform TPMS readings using the TPA 300. Allowing the user to write sensor values into the ECU of a vehicle with increased efficiency. The module also simplifies workflow particularly when working with Asian OEM's.","brand":"BOSCH","offers":[{"title":"1","offer_id":56342270116220,"sku":"1684465914","price":383.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/1684465914.jpg?v=1771520813"},{"product_id":"bartec-402173-ritesensor","title":"RiteSensor - Programmable TPMS Sensor","description":"\u003cp\u003eThe RiteSensor - Programmable TPMS Sensor is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Bartec reference 402173 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be programmed before or after installing for the specific vehicle\u003c\/li\u003e\n\u003cli\u003eSave time and reduce complexity of TPMS one-stop-shop service\u003c\/li\u003e\n\u003cli\u003eSingle part number SKU to reduce stock\u003c\/li\u003e\n\u003cli\u003eExtensive range of vehicle coverage\u003c\/li\u003e\n\u003cli\u003eDesigned to replace faulty sensors, without the extra costs of having to buy expensive OE sensors\u003c\/li\u003e\n\u003cli\u003eDesigned for optimum compatibility with OE and aftermarket wheels - no adjustment necessary\u003c\/li\u003e\n\u003cli\u003eComes assembled with black Snap-in valve, an aluminium Clamp-in stem included\u003c\/li\u003e\n\u003cli\u003eFully configurable and programmable universal TPMS sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eWeight: 52g\u003c\/li\u003e \u003cli\u003eDimensions: 83 x 56 x 24 mm\u003c\/li\u003e \u003cli\u003eFrequency: 433 MHz\u003c\/li\u003e \u003cli\u003eScrew Torque: 12.39in-lbs\u003c\/li\u003e \u003cli\u003eNut Torque: 35.4in-lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"BARTEC","offers":[{"title":"1","offer_id":56342270673276,"sku":"402173","price":35.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/402173.jpg?v=1771522599"},{"product_id":"bartec-405625-rite4aag-tech-350-with-4-foc-sensors","title":"Tech 350 With 4 Foc Sensors","description":"\u003cp\u003eThe Tech 350 With 4 Foc Sensors is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records CE\/UKCA technical info. Use Bartec reference 405625\/RITE4AAG when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMarket leading OBD and other relearns\u003c\/li\u003e\n\u003cli\u003eSupports the fastest sensor with the best coverage RITE-Sensor\u003c\/li\u003e\n\u003cli\u003eHigh Resolution Colour Display\u003c\/li\u003e\n\u003cli\u003eLong lasting user replaceable LiPo battery\u003c\/li\u003e\n\u003cli\u003eRugged, ergonomic enclosure\u003c\/li\u003e\n\u003cli\u003eIntuitive icon-based user interface\u003c\/li\u003e\n\u003cli\u003eTPMS Diagnostics through OBDII\u003c\/li\u003e\n\u003cli\u003eGraphical interface allows technicians to quickly navigate the menu\u003c\/li\u003e\n\u003cli\u003eLanguage selection option, supports 20+ languages\u003c\/li\u003e\n\u003cli\u003eTutorial mode\u003c\/li\u003e\n\u003cli\u003eResume service mode\u003c\/li\u003e\n\u003cli\u003eReview history mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCE\/UKCA\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e57\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.941\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTECH 350 WITH 4 FOC SENSORS","brand":"BARTEC","offers":[{"title":"1","offer_id":56342270869884,"sku":"405625\/RITE4AAG","price":408.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/405625_Rite4AAG.jpg?v=1771522631"},{"product_id":"bartec-451008-ritesensor-ble","title":"RiteSensor Bluetooth Black Stem","description":"\u003cp\u003eThe RiteSensor Bluetooth Black Stem is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records right fitting position, Halogen light design, with bulb for low beam, and H4 lamp type. Use Bartec reference 451008 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePreloaded pre-programmed MMY coverage\u003c\/li\u003e\n\u003cli\u003eIndustry standard LF wake-up\u003c\/li\u003e\n\u003cli\u003eProgrammable sensor\u003c\/li\u003e\n\u003cli\u003eBluetooth Low Energy\u003c\/li\u003e\n\u003cli\u003eLong battery life\u003c\/li\u003e\n\u003cli\u003eSensor comes pre-programmed\u003c\/li\u003e\n\u003cli\u003eClamp-In stems available in black and silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eNut Torque: 44.25in-lbs\u003c\/li\u003e \u003cli\u003eScrew Torque: 12.5in-lbs\u003c\/li\u003e \u003cli\u003eBluetooth Low Energy\u003c\/li\u003e \u003cli\u003eDimensions: 83 x 56 x 24 mm\u003c\/li\u003e \u003cli\u003eWeight: 52g\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeft-hand\/Right-hand Traffic\u003c\/th\u003e\n\u003ctd\u003efor left-hand traffic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting Position\u003c\/th\u003e\n\u003ctd\u003eRight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight Function\u003c\/th\u003e\n\u003ctd\u003ewith low beam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight Design\u003c\/th\u003e\n\u003ctd\u003eHalogen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplementary Article\/Supplementary Info\u003c\/th\u003e\n\u003ctd\u003ewith bulb for low beam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLamp Type\u003c\/th\u003e\n\u003ctd\u003eH4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003epaired article number\u003c\/th\u003e\n\u003ctd\u003e451009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight [kg]\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOEM Numbers\u003c\/th\u003e\n\u003ctd\u003eA4539066502, A4539068601\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nProgrammable Bluetooth sensor suitable for Tesla vehicles with Bluetooth sensor fitted","brand":"BARTEC","offers":[{"title":"1","offer_id":56342271230332,"sku":"451008","price":87.49,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/451008.jpg?v=1771522928"},{"product_id":"bosch-f026c00467-wheel-sensor-tyre-pressure-monitoring-system","title":"Clamp-in Metal Valve Titanium","description":"\u003cp\u003eThe Clamp-in Metal Valve Titanium is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records Titanium colour, 433 MHz frequency range, and steel construction. Use Bosch reference F026C00467 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOver 90% vehicle coverage with just four part numbers\u003c\/li\u003e\n\u003cli\u003eFunction and quality tests according to the same standards as original equipment\u003c\/li\u003e\n\u003cli\u003eSingle frequency 433 MHz\u003c\/li\u003e\n\u003cli\u003eEndlessly programmable\u003c\/li\u003e\n\u003cli\u003eUp to 10 years battery lifetime\u003c\/li\u003e\n\u003cli\u003eAll valves pre-mounted\u003c\/li\u003e\n\u003cli\u003eLight weight housing design\u003c\/li\u003e\n\u003cli\u003eCompatible with Bosch TPA 300 and other major programming tools\u003c\/li\u003e\n\u003cli\u003eNew Part No: - 0273014058\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.044\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eTitanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrequency Range [MHz]\u003c\/th\u003e\n\u003ctd\u003e433\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOEM Numbers\u003c\/th\u003e\n\u003ctd\u003e50554747, 53104671, 5Q0 907 275 F, 7PP 907 275 F, 36 10 6 798 872, 36 10 6 856 227, 36 10 6 874 829, 36 10 6 874 830, 36 10 6 877 937, 36 10 6 881 890, 36 10 6 887 147, 36 10 6 890 964, 36 23 6 779 490, 36 23 6 781 847, 36 23 6 798 726, 52088 990AC, 56029 359AA, 56029 359AB, 56029 398AB, 56029 400AC, 56029 400AD, 56029 400AE, 56029 481AB, 56053 031AB, 56053 031AC, 68001 698AA, 68001 698AB, 68078 768AA, 68252 495AA, 68313 387AB, 68324 960AA, 16 124 770 80, 16 373 117 80, 5430 T4, 5430 W0, 96 771 305 80, 98 115 363 80, 98 117 644 80, 68241 067AA, K9673198580, K9681102280, 670106084, 9673198580, 9681102280, 1757231, 1936088, 2036832, 2318453, 42753-T6N-A01, C2D47173, BBP3-37-140B, BDEL371409A, GS1D-37-140, A 000 905 00 30, A 000 905 18 04, A 000 905 21 02, A 000 905 39 07, A 000 905 41 00, A 000 905 41 04, A 000 905 72 00 (+156 more)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nSince 2014, all new vehicles within the EU must be equipped with a tyre pressure monitoring system (TPMS). Bosch universal sensors for TPMS measure the air pressure directly on the vehicle’s tyres and transmit it reliably by radio to the control unit in real time. Continuous monitoring of the tyre pressure prevents unnoticed pressure deviations and thus makes an important contribution to road safety. Adherence to the recommended tyre pressure also ensures optimised fuel consumption and reduced tyre wear. For easy and safe commissioning, Bosch recommends using the Bosch programming tool TPA 300.\n\n\u003cdiv class=\"docs\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/614c8a0d1f8050f60e5d09c7a9f0a46c8e960912_e4d27a0d-eb05-4e80-b278-18335a4eb41f.pdf?v=1771540029\" target=\"_blank\"\u003eTecDoc Article Picture\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"BOSCH","offers":[{"title":"1","offer_id":56342271426940,"sku":"F026C00467","price":42.31,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Bosch_F026C00467_Wheel_Sensor_tyre-pressure_monitoring_system_1.jpg?v=1770652361"},{"product_id":"bartec-tech350-10-tech-350-with-10-foc-sensors","title":"TECH350 TPMS Scanning and Coding Tool with 10 Sensors","description":"\u003cp\u003eThe TECH350 TPMS Scanning and Coding Tool with 10 Sensors is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Bartec reference TECH350\/10 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree TPMS desktop PC program\u003c\/li\u003e\n\u003cli\u003eUpload service data via cable\u003c\/li\u003e\n\u003cli\u003eReview history mode\u003c\/li\u003e\n\u003cli\u003eResume service mode\u003c\/li\u003e\n\u003cli\u003eTutorial mode\u003c\/li\u003e\n\u003cli\u003eLanguage selection option, supports 20+ languages\u003c\/li\u003e\n\u003cli\u003eGraphical interface allows technicians to quickly navigate the menu\u003c\/li\u003e\n\u003cli\u003eTPMS Diagnostics through OBDII\u003c\/li\u003e\n\u003cli\u003eIntuitive icon-based user interface\u003c\/li\u003e\n\u003cli\u003eRugged, ergonomic enclosure\u003c\/li\u003e\n\u003cli\u003eLong lasting user replaceable LiPo battery\u003c\/li\u003e\n\u003cli\u003eHigh Resolution Colour Display\u003c\/li\u003e\n\u003cli\u003eSupports the fastest sensor with the best coverage – RITE-Sensor\u003c\/li\u003e\n\u003cli\u003eMarket leading OBD and other relearns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003e2.8 inch high resolution colour display\u003c\/li\u003e \u003cli\u003e2.3Ah long lasting user replaceable LiPo battery\u003c\/li\u003e \u003cli\u003eOperating temperature 0 degree to 45 degree celsius\u003c\/li\u003e \u003cli\u003eDimensions: 204mm (length) x 100mm\/800mm (width at two points) x 35mm (depth)\u003c\/li\u003e \u003cli\u003eWeight: 380g\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS coding and cloning tool, program sensors, configure sensors, read TPMS fault codes via OBD, upload all data to desktop.","brand":"BARTEC","offers":[{"title":"1","offer_id":56342271656316,"sku":"TECH350\/10","price":563.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Tech350.jpg?v=1771560810"},{"product_id":"bartec-tech450-12-tech-450-with-12-foc-sensors","title":"TECH450 TPMS Scanning and Coding Tool with 12 Sensors","description":"\u003cp\u003eThe TECH450 TPMS Scanning and Coding Tool with 12 Sensors is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Bartec reference TECH450\/12 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree TPMS desktop PC program\u003c\/li\u003e\n\u003cli\u003eBluetooth enabled suitable for Tesla\u003c\/li\u003e\n\u003cli\u003eUpload service data via wifi\u003c\/li\u003e\n\u003cli\u003eReview history mode\u003c\/li\u003e\n\u003cli\u003eResume service mode\u003c\/li\u003e\n\u003cli\u003eTutorial mode\u003c\/li\u003e\n\u003cli\u003eLanguage selection option, supports 20+ languages\u003c\/li\u003e\n\u003cli\u003eGraphical interface allows technicians to quickly navigate the menu\u003c\/li\u003e\n\u003cli\u003eTPMS Diagnostics through OBDII\u003c\/li\u003e\n\u003cli\u003eIntuitive icon-based user interface\u003c\/li\u003e\n\u003cli\u003eRobust ergonomic housing\u003c\/li\u003e\n\u003cli\u003eMulti-programming of more than one sensor at a time\u003c\/li\u003e\n\u003cli\u003eHigh Resolution Colour Display\u003c\/li\u003e\n\u003cli\u003eSupports the fastest sensor with the best coverage – RITE-Sensor\u003c\/li\u003e\n\u003cli\u003eMarket leading OBD and other relearns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eWall-mounted or desktop charging cradle\u003c\/li\u003e \u003cli\u003eAutomatic sensor identification\u003c\/li\u003e \u003cli\u003eDimensions: 187 x 107 x 47mm\u003c\/li\u003e \u003cli\u003eWeight: 375g\u003c\/li\u003e \u003cli\u003e2.8 inch high resolution colour display\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS coding and cloning tool, program sensors, configure sensors, read TPMS fault codes via OBD, automatically update via wifi, Bluetooth enabled suitable for Tesla, upload all data to desktop.","brand":"BARTEC","offers":[{"title":"1","offer_id":56342271820156,"sku":"TECH450\/12","price":709.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Tech450.jpg?v=1771560811"},{"product_id":"bartec-tech600-15-tech-600-with-15-foc-sensors","title":"TECH600 TPMS Scanning and Coding Tool with 15 Sensors","description":"\u003cp\u003eThe TECH600 TPMS Scanning and Coding Tool with 15 Sensors is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Bartec reference TECH600\/15 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree TPMS desktop PC program\u003c\/li\u003e\n\u003cli\u003eBluetooth enabled suitable for Tesla\u003c\/li\u003e\n\u003cli\u003eUpload service data via wifi\u003c\/li\u003e\n\u003cli\u003eReview history mode\u003c\/li\u003e\n\u003cli\u003eResume service mode\u003c\/li\u003e\n\u003cli\u003eTutorial mode\u003c\/li\u003e\n\u003cli\u003eLanguage selection option, supports 20+ languages\u003c\/li\u003e\n\u003cli\u003eGraphical interface allows technicians to quickly navigate the menu\u003c\/li\u003e\n\u003cli\u003eTPMS Diagnostics through remote OBDII\u003c\/li\u003e\n\u003cli\u003eIntuitive icon-based user interface\u003c\/li\u003e\n\u003cli\u003eRobust ergonomic housing\u003c\/li\u003e\n\u003cli\u003eMulti-programming of more than one sensor at a time\u003c\/li\u003e\n\u003cli\u003eHigh Resolution Colour Display\u003c\/li\u003e\n\u003cli\u003eSupports the fastest sensor with the best coverage – RITE-Sensor\u003c\/li\u003e\n\u003cli\u003eMarket leading OBD and other relearns via remote OBD\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003e2.8 inch high resolution colour display\u003c\/li\u003e \u003cli\u003eWall-mounted or desktop charging cradle with integral holder for the BT OBDII\u003c\/li\u003e \u003cli\u003eLong-range BT connectivity\u003c\/li\u003e \u003cli\u003eStatus light visible from any angle\u003c\/li\u003e \u003cli\u003eWiFi connectivity\u003c\/li\u003e \u003cli\u003eAutomatic sensor identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nTPMS coding and cloning tool, program sensors, configure sensors, read TPMS fault codes via remote OBD interface, automatically update via wifi, Bluetooth enabled suitable for Tesla, upload all data to desktop. Optional Commercial Vehicle software.","brand":"BARTEC","offers":[{"title":"1","offer_id":56342271983996,"sku":"TECH600\/15","price":921.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Tech600.jpg?v=1771560813"},{"product_id":"autogem-tps03-snap-in-i-sensor-with-valve-433mhz","title":"Snap in I-Sensor with Valve - 433Mhz","description":"\u003cp\u003eThe Snap in I-Sensor with Valve - 433Mhz is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Autogem reference TPS03 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits most UK \u0026amp; European Vehicles\u003c\/li\u003e\n\u003cli\u003eProgrammable Sensor\u003c\/li\u003e\n\u003cli\u003e433mhz sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.047\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"AUTOGEM","offers":[{"title":"1","offer_id":56342272115068,"sku":"TPS03","price":49.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/TPS03.jpg?v=1771560955"},{"product_id":"powerprobe-int500-power-probe-insulation-tester","title":"INT500 Insulation Tester","description":"\u003cp\u003eThe INT500 Insulation Tester is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. It is listed in the workshop Equipment product category. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInsulation Test with PI\/DAR\/Timed\u003c\/li\u003e\n\u003cli\u003emA-selectable mode\u003c\/li\u003e\n\u003cli\u003eAuto bi-direction continuity Test\u003c\/li\u003e\n\u003cli\u003eVisual\/acoustic compare function\u003c\/li\u003e\n\u003cli\u003eAuto AC\/DC Voltage Test with LPF\u003c\/li\u003e\n\u003cli\u003e1500 records of Store\/Recall\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eMeasures AC Voltage(ACV)\u003c\/li\u003e \u003cli\u003eDC Voltage(DCV)\u003c\/li\u003e \u003cli\u003eFrequency\u003c\/li\u003e \u003cli\u003eEarth-bond Resistance(Continuity)\u003c\/li\u003e \u003cli\u003eCapacitance\u003c\/li\u003e \u003cli\u003eInsulation Resistance\u003c\/li\u003e \u003cli\u003e Features Auto-sense mode for automatic detection of ACV or DCV\u003c\/li\u003e \u003cli\u003e Insulation test range: 50V to 1000V with maximum resistance range up to 200GΩ\u003c\/li\u003e \u003cli\u003e Earth-bond resistance measurement range: 0.01Ω to 40.00kΩ\u003c\/li\u003e \u003cli\u003e Capacitance measurement range: 0.1nF to 10.00uF\u003c\/li\u003e \u003cli\u003e Bluetooth Low Energy(BLE) V5.0 for wireless data transfer\u003c\/li\u003e \u003cli\u003e Compliance with IEC\/EN 61010-1 and IEC\/EN 61557 standards\u003c\/li\u003e \u003cli\u003e IP40 rated for dust resistance\u003c\/li\u003e \u003cli\u003eoperates up to an altitude of 2000m\u003c\/li\u003e \u003cli\u003e True RMS measurements\u003c\/li\u003e \u003cli\u003eautomatic discharge function\u003c\/li\u003e \u003cli\u003e CAT IV 600V rated\u003c\/li\u003e \u003cli\u003esupports up to 1500 stored readings\u003c\/li\u003e \u003cli\u003e Auto power-off for battery preservation\u003c\/li\u003e \u003cli\u003e Dimensions: 96mm x 207mm x 54mm\u003c\/li\u003e \u003cli\u003eweight: 630g\u003c\/li\u003e \u003cli\u003epowered by 4 AA batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe INT500 Insulation and Earth-bond Resistance Tester is a high-precision, professional-grade tool designed for electricians, engineers, and technicians performing testing and diagnostics in electrical installations, motors, and automotive systems. Combining insulation resistance, continuity testing, and multimeter functionalities, the INT500 ensures versatile and reliable measurements in challenging environments. With True RMS technology and Auto-sense mode, it offers precise results for AC and DC voltages while automatically detecting the appropriate range.  Key Features: Insulation Resistance Testing: Voltage options from 50V to 1000V with a maximum resistance range of up to 200GΩ. Earth-bond Resistance Measurement: Wide range from 0.01Ω to 40.00kΩ, ensuring suitability for industrial and automotive applications. Capacitance Measurement: Range from 0.1nF to 10.00μF, enabling capacitor diagnostics. Auto-sense Mode: Automatically detects and displays ACV or DCV based on the higher voltage (\u0026gt;1V). True RMS Measurements: Delivers accurate readings for non-sinusoidal waveforms. Bluetooth Low Energy (BLE) V5.0: Enables seamless data transfer over a range of 6 meters. Data Storage: Up to 1500 measurement recordings, including detailed insulation and continuity test results. Compliance and Safety: Rated CAT IV 600V and compliant with IEC\/EN 61010-1 and EN 61557 standards, ensuring safety during high-voltage tests. Durable Design: Dust-resistant (IP40), capable of withstanding a 4-foot drop, and functional at altitudes up to 2000m. Display and Indicators: Backlit LCD with high-voltage warning indicators, PASS\/FAIL visual alerts, and auto power-off functionality. Power Source: Operates on 4 AA batteries, providing up to 2600 Earth-bond resistance tests or 1100 insulation tests. Additional Specifications: Display count: 4000 counts with 2 readings per second. Operating temperature: -20°C to 50°C, with varying humidity tolerances. Dimensions: 96mm x 207mm x 54mm. Weight: 630g (including batteries). Overload protection: AC\/DC 600V. The INT500 is ideal for electricians requiring a compact, rugged, and versatile device to test insulation, continuity, and voltage in residential, industrial, or automotive settings.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342272278908,"sku":"INT500","price":487.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/INT500.jpg?v=1771542334"},{"product_id":"powerprobe-pp3ezredas-pp3ez-circuit-tester-kit","title":"3EZ w\/Case \u0026 Accessories - Red","description":"\u003cp\u003eThe 3EZ w\/Case \u0026amp; Accessories - Red is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Powerprobe reference PP3EZREDAS when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTests Bad Grounds and Short Circuits\u003c\/li\u003e\n\u003cli\u003eSupplies Power and Ground\u003c\/li\u003e\n\u003cli\u003eDigital Voltmeter with Min\/Max Voltage Capturing\u003c\/li\u003e\n\u003cli\u003eNavigation Menu for EZ Learning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eVoltage Detection Range: Supports low and high AC voltage detection\u003c\/li\u003e \u003cli\u003e LED Indicators: Visual indication of circuit status and voltage presence\u003c\/li\u003e \u003cli\u003e Non-Contact Operation: Safely detects voltage without direct contact\u003c\/li\u003e \u003cli\u003e Frequency Compatibility: Operates effectively at standard electrical frequencies\u003c\/li\u003e \u003cli\u003e Durability: Designed for robust field use with protective casing\u003c\/li\u003e \u003cli\u003e Ease of Use: Features ergonomic design and intuitive operation\u003c\/li\u003e \u003cli\u003e Compliance: Adheres to international electrical safety standards\u003c\/li\u003e \u003cli\u003e Battery Operated: Uses standard alkaline batteries for portability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.52\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe PP3EZ Voltage Tester is a portable, user-friendly tool engineered to help electricians and technicians identify live circuits quickly and safely. With a non-contact operation, it eliminates the need for direct connection to live components, reducing risks during electrical testing. Featuring bright LED indicators, the PP3EZ provides a clear visual representation of voltage presence, ensuring ease of use in dim or bright conditions.  Key Features: Non-Contact Voltage Detection: Identifies voltage presence without direct contact, ensuring maximum safety. Voltage Range: Detects both low and high AC voltages, making it suitable for various applications. Visual Indication: LED indicators signal the presence of live voltage, simplifying diagnosis. Ergonomic Design: Compact and lightweight for effortless operation. Durability: Built with robust materials to withstand field conditions. Compliance and Safety: Meets international safety standards for reliable use. Applications: Testing electrical circuits in residential, commercial, and industrial settings. Verifying live wires and connections in switches, outlets, and panels. Quick voltage checks during maintenance and troubleshooting.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342272704892,"sku":"PP3EZREDAS","price":195.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PP3EZREDAS.jpg?v=1771549303"},{"product_id":"powerprobe-ppdm300auto-digital-multimeter-dm300auto","title":"Power Probe DM300AUTO Digital Multimeter","description":"\u003cp\u003eThe Power Probe DM300AUTO Digital Multimeter is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Powerprobe reference PPDM300AUTO when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures current Flowing through fuses without removing the fuse (up to 80A)\u003c\/li\u003e\n\u003cli\u003eFuse Voltage drop testing\u003c\/li\u003e\n\u003cli\u003eGuided automotive test mode\u003c\/li\u003e\n\u003cli\u003eAC\/DC Voltage measurements up to 1000V\u003c\/li\u003e\n\u003cli\u003eCurrent measurements up to 30A\u003c\/li\u003e\n\u003cli\u003eMeasures resistance, continuity and diode testing\u003c\/li\u003e\n\u003cli\u003eFrequency and duty cycle for PWM signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003ealligator clips.\u003c\/li\u003e \u003cli\u003efuse current probe set\u003c\/li\u003e \u003cli\u003etest leads\u003c\/li\u003e \u003cli\u003e Accessories: Includes 30A probe\u003c\/li\u003e \u003cli\u003eweight: 588g\u003c\/li\u003e \u003cli\u003e Dimensions: 92.6mm x 205mm x 57.5mm\u003c\/li\u003e \u003cli\u003eCAT III 1000V rated\u003c\/li\u003e \u003cli\u003e Safety Standards: CAT IV 600V\u003c\/li\u003e \u003cli\u003e Durability: Drop protection for up to 4 feet\u003c\/li\u003e \u003cli\u003e Power Supply: Powered by 3 AAA alkaline batteries\u003c\/li\u003e \u003cli\u003e Display: 2.8” TFT color LCD with a user-friendly menu\u003c\/li\u003e \u003cli\u003e Continuity and Diode Testing: Provides audible and visual feedback\u003c\/li\u003e \u003cli\u003e Frequency and Duty Cycle Measurement: Measures PWM signals up to 20.00kHz and duty cycles from 1%-99%\u003c\/li\u003e \u003cli\u003e Fuse Testing: Measures current through fuses without removal (2A to 80A)\u003c\/li\u003e \u003cli\u003ealternator charging tests for normal\/smart alternators\u003c\/li\u003e \u003cli\u003e Automotive-Specific Functions: Cranking voltage tests for 12V\/24V starters\u003c\/li\u003e \u003cli\u003eresistance up to 40.00MΩ\u003c\/li\u003e \u003cli\u003eDC current up to 30A\u003c\/li\u003e \u003cli\u003eMeasurement Capabilities: True RMS AC\/DC voltage up to 1000V\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.87\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe PPDM300 Automotive Test Meter is a versatile and indispensable tool for automotive professionals. Combining a full True RMS digital multimeter with advanced automotive-specific diagnostics, it allows users to perform comprehensive testing on electrical systems with ease. From standard voltage and current measurements to fuse testing without removal, the PPDM300 provides reliable and efficient results.  Key Features: Advanced Diagnostics: Includes cranking voltage tests and alternator charging diagnostics for 12V\/24V systems, supporting normal and smart alternators. Fuse Testing: Tests fuse current (2A to 80A) without needing removal, saving time during diagnostics. High-Accuracy Measurements: True RMS AC\/DC voltage measurements up to 1000V;DC current up to 30A;resistance up to 40.00MΩ. Frequency and Duty Cycle: Measures PWM signals up to 20kHz and duty cycles between 1%-99%. Ease of Use: Equipped with a 2.8” TFT color LCD and an intuitive interface, it ensures quick and accurate operation. Safety and Durability: Certified CAT IV 600V and CAT III 1000V for high-voltage applications;drop-tested for up to 4 feet. Compact Design: Portable and robust, designed for field and workshop use. Specifications: Voltage Range: 1000V AC\/DC Current Measurement: In-line DC current up to 30A with an included 30A probe. Fuse Current Range: 2A to 80A (MINI, ATC, MAXI fuses). Resistance Range: Up to 40.00MΩ. Frequency and Duty Cycle: Up to 20.00kHz and 1%-99%, respectively. Applications: Automotive repair and maintenance. Diagnosing starter and alternator performance. Electrical troubleshooting in vehicles.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342272934268,"sku":"PPDM300AUTO","price":306.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PPDM300AUTO.jpg?v=1771549333"},{"product_id":"powerprobe-ppdm500max-digital-multimeter-dm500max","title":"DM500MAX Advanced Digital Multimeter Tester","description":"\u003cp\u003eThe DM500MAX Advanced Digital Multimeter Tester is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Powerprobe reference PPDM500MAX when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdded Convenience: The Power Probe DM500MAX Automotive Multimeter Voltage Tester has automatic back light that adjusts to changing light conditions; Drop resistant protective rubber holster\u003c\/li\u003e\n\u003cli\u003eMeasuring Voltage: Accurately and automatically determine both AC and DC voltage from 0.01mV-1000V with 600V cat IV and 100V Cat III safety rating for testing vehicle batteries or home appliances\u003c\/li\u003e\n\u003cli\u003eTesting Current: Correctly calibrate amperage for both AC and DC currents with auto-range metering from 0.01mA-10.00A; Determine whether or not an outlet is active or if solar cells function properly\u003c\/li\u003e\n\u003cli\u003eFor All Electrical Testing: Power Probe digital multimeters don’t just measure voltage and amperage but also resistance, frequency, continuity, capacitance, and even temperature\u003c\/li\u003e\n\u003cli\u003eMultimeter kit includes a DM500MAX multimeter, drop resistant rubber housing with kickstand, magnetic strap, 2 test leads (1 black, 1 red), 2 alligator clip lead attachments (1 black, 1 red), a USB plug, K-type thermocouple, and 4 AA batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eMeasurement Capabilities: True RMS AC\/DC voltage up to 1000V\u003c\/li\u003e \u003cli\u003eDC current up to 30A\u003c\/li\u003e \u003cli\u003eresistance up to 60MΩ\u003c\/li\u003e \u003cli\u003e Automotive Diagnostics: Cranking voltage tests\u003c\/li\u003e \u003cli\u003ealternator charging system tests for 12V\/24V\u003c\/li\u003e \u003cli\u003e Fuse Current Testing: Measures current through fuses without removal (2A to 80A)\u003c\/li\u003e \u003cli\u003e Frequency and Duty Cycle: Measures PWM signals up to 40kHz\u003c\/li\u003e \u003cli\u003eduty cycle range: 1%-99%\u003c\/li\u003e \u003cli\u003e Thermal Imaging: Integrated infrared temperature measurement for advanced diagnostics\u003c\/li\u003e \u003cli\u003e Display: 3.5” high-resolution TFT color LCD with customizable interfaces\u003c\/li\u003e \u003cli\u003e Power Source: Rechargeable lithium-ion battery\u003c\/li\u003e \u003cli\u003e Durability: 4-foot drop protection\u003c\/li\u003e \u003cli\u003eIP54 dust and water resistance\u003c\/li\u003e \u003cli\u003e Safety Ratings: CAT IV 600V\u003c\/li\u003e \u003cli\u003eCAT III 1000V certified\u003c\/li\u003e \u003cli\u003e Data Storage: On-device memory for saving multiple test results.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe PPDM500MAX Automotive Diagnostic Tool is the ultimate solution for professionals in automotive diagnostics and electrical testing. Combining True RMS multimeter functions, automotive-specific tests, and advanced thermal imaging, it provides unparalleled versatility and precision. Designed to withstand tough environments, this tool is a must-have for mechanics and engineers working on complex electrical systems.  Key Features: Enhanced Diagnostic Tools: Includes cranking voltage tests and alternator charging system analysis for both 12V and 24V systems. Thermal Imaging: Integrated infrared measurement allows for quick detection of temperature anomalies in components. Advanced Fuse Testing: Tests fuse current (2A to 80A) without requiring removal, saving time and reducing the risk of damage. True RMS Multimeter: Measures AC\/DC voltage up to 1000V, DC current up to 30A, and resistance up to 60MΩ with high accuracy. Frequency and Duty Cycle Testing: Supports PWM signal diagnostics up to 40kHz and duty cycle analysis from 1%-99%. Customizable Interface: The 3.5” TFT color LCD provides a clear and intuitive interface with adjustable layouts. Robust Design: Certified IP54 for dust and water resistance and built to survive drops from up to 4 feet. Rechargeable Battery: Long-lasting lithium-ion battery ensures extended use without frequent replacements. Safety and Compliance: CAT IV 600V and CAT III 1000V certifications ensure reliable performance in high-voltage environments. Specifications: Voltage Range: 1000V AC\/DC. Current Measurement: DC current up to 30A with probes. Resistance Range: Up to 60MΩ. Fuse Current Measurement: 2A to 80A for MINI, ATC, and MAXI fuses. Frequency Range: Up to 40kHz with PWM compatibility. Thermal Imaging: Infrared sensor for temperature analysis. Applications: Diagnosing starter and alternator issues. Verifying the functionality of electrical systems in vehicles. Identifying thermal and electrical anomalies with precision.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342273196412,"sku":"PPDM500MAX","price":352.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PPDM500MAX.jpg?v=1771549334"},{"product_id":"powerprobe-ppdmm-digital-multimeter-ppdmm","title":"Multimeter CAT-IV Digital Measures AC\/DC Voltage, Current Resistance","description":"\u003cp\u003eThe Multimeter CAT-IV Digital Measures AC\/DC Voltage, Current Resistance is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Powerprobe reference PPDMM when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt Shop Tough with Heavy Duty Construction case\u003c\/li\u003e\n\u003cli\u003eLoud Indicator Tones for Shop Environments\u003c\/li\u003e\n\u003cli\u003eDigital Multimeter for streamlined testing\u003c\/li\u003e\n\u003cli\u003eLarge Bright Screen for easy readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eMeasurement Capabilities: True RMS AC\/DC voltage up to 1000V\u003c\/li\u003e \u003cli\u003eDC current up to 10A\u003c\/li\u003e \u003cli\u003eresistance up to 40MΩ\u003c\/li\u003e \u003cli\u003e Power Supply: Operates on standard AAA batteries.\u003c\/li\u003e \u003cli\u003e Durability: Drop-tested for up to 4 feet and designed for rugged use\u003c\/li\u003e \u003cli\u003e Low Battery Indicator: Alerts users to replace batteries\u003c\/li\u003e \u003cli\u003e Data Hold: Locks the displayed measurement for ease of recording\u003c\/li\u003e \u003cli\u003e Auto Range Function: Automatically selects the appropriate measurement range\u003c\/li\u003e \u003cli\u003eCAT III 1000V compliant\u003c\/li\u003e \u003cli\u003e Safety Standards: CAT IV 600V\u003c\/li\u003e \u003cli\u003e Display: Backlit digital display with 6000 counts\u003c\/li\u003e \u003cli\u003e Continuity and Diode Testing: Audible alert for continuity and diode voltage drop testing\u003c\/li\u003e \u003cli\u003eduty cycle from 0.1%-99.9%\u003c\/li\u003e \u003cli\u003e Frequency and Duty Cycle: Measures frequency up to 10MHz\u003c\/li\u003e \u003cli\u003e Capacitance Measurement: Measures up to 100μF\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe PPDMM Digital Multimeter is a versatile and accurate True RMS device designed for professionals and hobbyists working with electrical systems. Compact and rugged, it combines essential features with advanced measurement capabilities, ensuring reliable diagnostics and troubleshooting in diverse environments.  Key Features: True RMS Measurement: Ensures accurate readings for both AC and DC voltage up to 1000V and current up to 10A. Comprehensive Testing Functions: Includes resistance measurement up to 40MΩ, capacitance measurement up to 100μF, and diode\/continuity testing. Frequency and Duty Cycle: Supports frequency measurements up to 10MHz and duty cycles between 0.1%-99.9%, making it suitable for testing PWM signals. User-Friendly Display: A backlit digital screen with 6000 counts ensures clear readings in all lighting conditions. Automatic Ranging: Simplifies operation by selecting the optimal range for measurements automatically. Safety and Compliance: Rated CAT IV 600V and CAT III 1000V for high-voltage applications, ensuring user safety. Compact and Durable Design: Built to withstand drops from up to 4 feet and harsh operating conditions. Specifications: Voltage Range: 1000V AC\/DC. Current Range: 10A DC. Resistance Range: Up to 40MΩ. Capacitance Range: Up to 100μF. Frequency Range: Up to 10MHz. Applications: Ideal for testing and troubleshooting in residential, commercial, and industrial electrical systems. Suitable for diagnosing electronics and vehicle electrical systems.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342273327484,"sku":"PPDMM","price":170.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PPDMM.jpg?v=1771549336"},{"product_id":"powerprobe-ppdraw-power-probe-draw-monitor","title":"Automotive Battery Voltage and Parasitic Draw Monitor with OBDII Connection","description":"\u003cp\u003eThe Automotive Battery Voltage and Parasitic Draw Monitor with OBDII Connection is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Powerprobe reference PPDRAW when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMonitors car battery voltage and parasitic current draw for accurate diagnostics.\u003c\/li\u003e\n\u003cli\u003eConnects via 16-pin OBDII connector to supply 12V power and prevent data loss during battery replacement.\u003c\/li\u003e\n\u003cli\u003eGraphing mode displays voltage and amperage as a waveform, allowing in-depth electrical system analysis.\u003c\/li\u003e\n\u003cli\u003eRechargeable high-capacity lithium-ion battery with USB-C charging and multi-color TFT display.\u003c\/li\u003e\n\u003cli\u003eAdjustable current output alarm and auto power-off settings to protect the vehicle’s electrical system.\u003c\/li\u003e\n\u003cli\u003eView and record real-time data via Bluetooth on the Power Probe Link app for enhanced performance tracking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eVoltage Monitoring Monitors car battery voltage (0-30V)\u003c\/li\u003e \u003cli\u003e Current Monitoring  Detects leakage current with a resolution of 1mA\u003c\/li\u003e \u003cli\u003e Smart Output: Outputs 12V at up to 10A for backup power supply during battery replacement\u003c\/li\u003e \u003cli\u003e Bluetooth Connectivity Bluetooth 5.0 for remote monitoring via PowerProbe Link App\u003c\/li\u003e \u003cli\u003e Display: 2.8-inch TFT color screen with graphical and numerical modes\u003c\/li\u003e \u003cli\u003e Graphical Mode: Displays 20-second voltage and current history as waveforms\u003c\/li\u003e \u003cli\u003e Safety Features: Includes overvoltage (above 30V), overcurrent (above 10A), and temperature protection\u003c\/li\u003e \u003cli\u003e Power Source: Built-in 14.4V, 3000mAh lithium battery\u003c\/li\u003e \u003cli\u003e Charging Interface: USB Type-C, supports PD fast charging\u003c\/li\u003e \u003cli\u003e System Settings: Configurable auto power-off time and current alarm thresholds\u003c\/li\u003e \u003cli\u003e Certifications: FCC, CE, ETL-us, UKCA, EAC\u003c\/li\u003e \u003cli\u003e Interface: Standard OBDII input\/output interface\u003c\/li\u003e \u003cli\u003e Durability: Designed for automotive environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e165\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe PPDRAW Draw Monitor is an advanced diagnostic tool tailored for monitoring automotive battery performance and electrical systems. Designed with professionals in mind, it supports precise voltage and current analysis, graphical data display, and backup power functionality during battery replacements. Its Bluetooth connectivity and robust safety features ensure seamless and secure operation in diverse automotive environments.  Key Features: Voltage and Current Monitoring: Monitors battery voltage (0-30V) and detects leakage current with high accuracy. Smart Output: Provides 12V output up to 10A to prevent data loss during battery replacement or system maintenance. Graphical Display: Offers a visual representation of 20-second voltage and current history, making diagnostics intuitive. Wireless Control: Integrated Bluetooth 5.0 for remote operation via the PowerProbe Link App. Safety Protections: Includes overvoltage, overcurrent, and temperature protection for device and vehicle safety. Easy-to-Use Display: 2.8-inch TFT color screen with graphical and numerical modes for clear and detailed readings. Fast Charging: USB Type-C port supports PD fast charging, ensuring minimal downtime. Specifications: Voltage Monitoring Range: 0-30V. Current Monitoring Range: Up to 10A with 1mA resolution. Battery: Built-in 14.4V, 3000mAh lithium battery. Display Resolution: 240x320 pixels. Wireless Connectivity: Bluetooth 5.0. Safety Ratings: Certified by FCC, CE, ETL-us, UKCA, EAC. Applications: Diagnostic and monitoring tool for automotive batteries and electrical systems. Backup power during vehicle battery replacement. Detecting and analyzing voltage leaks or irregularities.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342273589628,"sku":"PPDRAW","price":180.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PPDRAW-1.jpg?v=1771549338"},{"product_id":"powerprobe-ppect3000-power-probe-circuit-tracer-kit","title":"Circuit Tracer for Shorts and Open circuits ECT3000","description":"\u003cp\u003eThe Circuit Tracer for Shorts and Open circuits ECT3000 is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Powerprobe reference PPECT3000 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignal Locking will show the correct direction to a short to ground\u003c\/li\u003e\n\u003cli\u003eSignal distance bar indicates distance height from short to ground or open circuits\u003c\/li\u003e\n\u003cli\u003eLED light on receiver illuminates the work space area\u003c\/li\u003e\n\u003cli\u003eLonger 10-minute Auto shut off time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003e Cable Length: 6m transmitter power cable for extended reach.\u003c\/li\u003e \u003cli\u003e Accessories Compatibility: Standard 4mm banana jack connectors for custom adapters\u003c\/li\u003e \u003cli\u003e Auto Shutoff: Receiver turns off after 10 minutes of inactivity\u003c\/li\u003e \u003cli\u003e Sensitivity Adjustment: Adjustable for varying signal strengths\u003c\/li\u003e \u003cli\u003e Signal Detection: Indicates short and open circuits using visual and audio cues\u003c\/li\u003e \u003cli\u003e Altitude Limit: \u0026lt;2000m\u003c\/li\u003e \u003cli\u003e Maximum Humidity: 80% non-condensing\u003c\/li\u003e \u003cli\u003e Storage Temperature: Up to 70°C\u003c\/li\u003e \u003cli\u003e Operating Temperature: Up to 50°C\u003c\/li\u003e \u003cli\u003eground circuit tracking\u003c\/li\u003e \u003cli\u003eshort circuit tracking\u003c\/li\u003e \u003cli\u003e Circuit Testing Modes: Open circuit tracking\u003c\/li\u003e \u003cli\u003e Signal Frequency: 4kHz polarized signal\u003c\/li\u003e \u003cli\u003e Operating Voltage (Receiver): 2 AAA batteries\u003c\/li\u003e \u003cli\u003e Current Consumption (Transmitter): \u0026lt;200mA\u003c\/li\u003e \u003cli\u003eOperating Voltage (Transmitter): 6V-48V DC\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe ECT3000 Circuit Tracker is a versatile diagnostic tool designed to help automotive professionals efficiently locate and diagnose open and short circuits in vehicle wiring systems. By transmitting a polarized 4kHz signal, it simplifies troubleshooting by enabling quick detection of problematic circuits without disassembling complex wiring harnesses.  Key Features: Short Circuit Tracking: Pinpoints shorts and provides directional guidance with a polarized signal. Open Circuit Tracking: Detects breaks or interruptions in the wiring and follows the signal across obstacles like carpets or panels. Adjustable Sensitivity: Allows users to fine-tune the detection range for precise diagnostics. Clear Feedback: Offers both visual LED indicators and audible alerts for easy interpretation of circuit status. Extended Range: The 6m transmitter cable ensures accessibility across large vehicles. Safety and Protection: Operates within safe voltage and current limits, avoiding damage to sensitive electronics. Auto Shutoff: Conserves battery life by turning off the receiver after 10 minutes of inactivity. Specifications: Transmitter Voltage Range: 6V to 48V DC. Receiver Power: 2 AAA batteries. Signal Frequency: 4kHz. Temperature Limits: 50°C operating, 70°C storage. Humidity Limit: 80% non-condensing. Altitude: Functional below 2000m. Applications: Locating short circuits in automotive wiring systems. Tracking open circuits or wiring breaks. Identifying intermittent electrical issues. Diagnosing and testing vehicle ground circuits.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342273917308,"sku":"PPECT3000","price":196.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PPECT3000.jpg?v=1771549339"},{"product_id":"powerprobe-pppwm-pulse-width-modulation-adaptor","title":"PWM Adapter Tip for Pulse Modulation Width Measurement","description":"\u003cp\u003eThe PWM Adapter Tip for Pulse Modulation Width Measurement is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Powerprobe reference PPPWM when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eADJUSTABLE DUTY CYCLE from 5% to 100% with side buttons\u003c\/li\u003e\n\u003cli\u003eCOMPATABLE WITH all Power Probe models with a 4mm banana jack in\/out\u003c\/li\u003e\n\u003cli\u003eEASY INSTALL by removing power probe tip and inserting adapter into banana jack\u003c\/li\u003e\n\u003cli\u003eGREAT FOR diagnosing circuit fan issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eVoltage Range: Operates between 9V and 24V DC\u003c\/li\u003e \u003cli\u003e Current Capacity: Maximum 40A output\u003c\/li\u003e \u003cli\u003e Frequency Range: Adjustable pulse width modulation (PWM) frequency from 10Hz to 200Hz\u003c\/li\u003e \u003cli\u003e Duty Cycle Range: Adjustable from 0% to 100%\u003c\/li\u003e \u003cli\u003e Input Protection: Overvoltage and reverse polarity protection\u003c\/li\u003e \u003cli\u003e Output Control: Variable output power via rotary dial\u003c\/li\u003e \u003cli\u003e Dimensions: Compact enclosure design for portability\u003c\/li\u003e \u003cli\u003e Connection Interface: Equipped with standard terminals for easy wiring\u003c\/li\u003e \u003cli\u003e Operating Temperature: -20°C to 60°C\u003c\/li\u003e \u003cli\u003e Housing: Durable and lightweight for automotive or workshop use\u003c\/li\u003e \u003cli\u003e Indicators: LED indicators for power status and output activity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.09\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe PPPWM Pulse Width Modulation Controller is an advanced tool designed for professionals and hobbyists in automotive and industrial settings. It provides precise control over DC-powered devices through an adjustable PWM signal, making it ideal for tasks requiring variable power outputs.  Key Features: Adjustable Frequency and Duty Cycle: Offers complete control over PWM signals, with frequency adjustable from 10Hz to 200Hz and duty cycle adjustable between 0% and 100%. High Current Capacity: Supports up to 40A, enabling control of high-power devices. User-Friendly Operation: Features a rotary dial for seamless power adjustments and LED indicators for operational status. Enhanced Protection: Built-in overvoltage and reverse polarity protection to safeguard connected devices. Compact and Durable Design: Lightweight yet robust housing ensures portability and longevity in demanding environments. Versatile Applications: Suitable for controlling motor speeds, lighting, and other DC-powered equipment. Specifications: Voltage Input: 9V to 24V DC. Maximum Output Current: 40A. Frequency Range: 10Hz to 200Hz. Duty Cycle Adjustment: 0% to 100%. Operating Temperature: -20°C to 60°C. Protection Features: Overvoltage and reverse polarity protection. Dimensions: Compact and portable. Applications: Controlling motor speeds in automotive systems. Regulating power to DC lighting setups. Adjusting power levels in various DC-powered devices in workshops or industrial settings.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342274146684,"sku":"PPPWM","price":65.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PPWM.jpg?v=1771549370"},{"product_id":"powerprobe-ppt5va-power-probe-5-volt-adaptor","title":"5 Volt Reference Adapter Connect Power Probe Circuit-Tester \u0026 Limit Voltage to 5-Volts","description":"\u003cp\u003eThe 5 Volt Reference Adapter Connect Power Probe Circuit-Tester \u0026amp; Limit Voltage to 5-Volts is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Powerprobe reference PPT5VA when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces the Power Probe tip battery voltage to 5V and limits the current output works with PP3EZREDAS\u003c\/li\u003e\n\u003cli\u003eSimple add-on accessory that works with all Power Probes with 4mm banana tip\u003c\/li\u003e\n\u003cli\u003eSafely simulate sensor reference voltages and outputs without damaging components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eVoltage Output: 5V regulated output\u003c\/li\u003e \u003cli\u003e Connector Type: Standard 4mm banana connector\u003c\/li\u003e \u003cli\u003e Compatibility: Works with Power Probe Circuit Testers (PPBasic, PP3 Series, PP4 Series, Pro Series)\u003c\/li\u003e \u003cli\u003e Adapter Requirement for Older Models: Requires banana jack conversion kit (#PNLS020A) for PP1 and PP2 models\u003c\/li\u003e \u003cli\u003e LED Indicator: Red LED illuminates to show active 5V output\u003c\/li\u003e \u003cli\u003e Ground Connection: Includes auxiliary ground lead clip for secure grounding\u003c\/li\u003e \u003cli\u003e Durability: Built with rugged materials for long-term use\u003c\/li\u003e \u003cli\u003e Use Case: Supplies a stable 5V to test circuits and components in vehicles\u003c\/li\u003e \u003cli\u003e Dimensions and Weight: Compact and lightweight for easy portability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe PPT5VA 5 Volt Adapter is an essential accessory for automotive professionals using Power Probe Circuit Testers. It provides a stable, regulated 5V output, enabling precise testing of low-voltage circuits and components. This adapter ensures compatibility with most Power Probe models and includes a robust LED indicator for active status monitoring.  Key Features: Stable 5V Output: Provides a reliable, regulated 5V power supply for circuit and component testing. Broad Compatibility: Compatible with all Power Probe models featuring a banana jack tip, including PPBasic, PP3 Series, PP4 Series, and Pro Series. Older models (PP1 and PP2) require a conversion kit. LED Indicator: Illuminates red when the adapter is active, providing clear feedback. Auxiliary Ground Connection: Ensures secure grounding with the included ground lead clip. Easy Installation: Quickly attaches to the Power Probe tip with standard 4mm connectors. Durable Design: Made with high-quality materials for reliable performance in demanding environments. Applications: Testing low-voltage automotive circuits and components. Supplying a stable 5V to sensitive electronic systems during diagnostics. Enabling compatibility with older Power Probe models using the banana jack conversion kit.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342274277756,"sku":"PPT5VA","price":29.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PPT5VA.jpg?v=1771549395"},{"product_id":"powerprobe-ppvt750-power-probe-voltage-tester","title":"12 To 750V Two Pole DC\/AC Automotive Car Voltage Meter Electric and Hybrid Vehicles","description":"\u003cp\u003eThe 12 To 750V Two Pole DC\/AC Automotive Car Voltage Meter Electric and Hybrid Vehicles is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Use Powerprobe reference PPVT750 when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eService Your Vehicles Safely: Electric and hybrid vehicles feature battery systems that need to be disconnected to prevent error or shock prior to service; Use the Power Probe VT750 LCD Car Voltage Meter Tester to ensure your battery voltage reads zero be\u003c\/li\u003e\n\u003cli\u003eReliable Detection for Optimal Safety: Auto electric tester tool has a voltage rating from 12 to 750 volts and overvoltage protection up to 1000 volts AC\/DC\u003c\/li\u003e\n\u003cli\u003eCompact Two-Prong Design: 9.4-inch (23.9cm) fixed probe housing and secondary electrical tester pole work together to prevent false readings and measure accurate, exact voltage (AC\/DC) current\u003c\/li\u003e\n\u003cli\u003eQuality You Can Trust: Thick material ensures durability for the volt meter, while the retracting insulators help prevent any accidental shorts between the probes or surrounding objects\u003c\/li\u003e\n\u003cli\u003eEasy To Use: 10 minutes after disconnecting the 12-volt and high-volt batteries, complete a Live-Dead-Live test; Check 12v battery for a baseline, check high-volt battery for a dead or zero reading, then re-verify the electrical meter is still functioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003e Overvoltage Protection: Protects the device during high voltage surges\u003c\/li\u003e \u003cli\u003e Power Source: No batteries required, powered by the voltage under test\u003c\/li\u003e \u003cli\u003e Operating Environment: Designed for 0°C to 40°C, with 80% relative humidity tolerance\u003c\/li\u003e \u003cli\u003e Build Quality: Durable, ergonomic design with protective housing\u003c\/li\u003e \u003cli\u003e Probes: Integrated test probes with secure connectors.\u003c\/li\u003e \u003cli\u003e Response Time: Quick response for voltage and continuity checks\u003c\/li\u003e \u003cli\u003e Safety Compliance: CAT III 750V certification\u003c\/li\u003e \u003cli\u003e Polarity Detection: Identifies positive and negative poles\u003c\/li\u003e \u003cli\u003e Voltage Indication: Provides AC and DC voltage differentiation\u003c\/li\u003e \u003cli\u003e Display: LCD with clear digital readings\u003c\/li\u003e \u003cli\u003e Continuity Testing: Audible beep for continuity detection\u003c\/li\u003e \u003cli\u003eVoltage Testing Range: 12V to 750V AC\/DC\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nThe PPVT750LCD Voltage and Continuity Tester is a reliable tool designed for electricians and technicians to perform quick, accurate voltage and continuity checks. Its LCD display provides clear readings for both AC and DC voltages, while its battery-free design ensures readiness at all times.  Key Features: Wide Voltage Range: Tests voltages from 12V to 750V AC\/DC, catering to residential, commercial, and industrial applications. Continuity Testing: Emits an audible beep for clear identification of electrical continuity. Polarity Detection: Automatically identifies the positive and negative poles in DC circuits. Battery-Free Operation: Powered by the voltage under test, ensuring consistent performance without the need for battery replacements. Safety Certified: CAT III 750V rating ensures safe operation in high-voltage environments. Ergonomic Design: Lightweight and compact, with an ergonomic grip for extended use. Durable Build: Protective housing enhances longevity, even in demanding conditions. Specifications: Voltage Range: 12V to 750V AC\/DC. Display: Digital LCD with backlit screen for clear visibility. Response Time: Quick detection of voltage and continuity. Polarity Detection: Yes (for DC systems). Continuity Detection: Yes, with an audible beep. Overvoltage Protection: Built-in safeguards. Safety Rating: CAT III 750V. Operating Conditions: 0°C to 40°C, 80% relative humidity. Applications: Testing outlets, switches, and wiring in residential and commercial systems. Verifying circuit continuity in industrial settings. Identifying voltage and polarity in automotive and HVAC systems.","brand":"POWERPROBE","offers":[{"title":"1","offer_id":56342274408828,"sku":"PPVT750","price":131.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/PPVT750.jpg?v=1771549396"},{"product_id":"carlyle-hand-tools-ctj3t-3t-trolley-jack","title":"3T Trolley Jack","description":"\u003cp\u003eThe 3T Trolley Jack is a workshop service or equipment product that supports the inspection, inflation, programming or maintenance task stated in its product data. Its catalogue specification records UKCA \/CE technical info and 1 minimum age. Use Carlyle hand tools reference CTJ3T when cross-checking the part. Confirm the operating range, voltage or pressure, connections, included parts and intended application before use, and follow the equipment manufacturer's safety instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSealed Power Unit Prevents Leaks\u003c\/li\u003e\n\u003cli\u003eFast Lifting Dual Pump for Efficient Performance\u003c\/li\u003e\n\u003cli\u003eHandle Yoke Stopper\u003c\/li\u003e\n\u003cli\u003eSoft Rubber Pad\u003c\/li\u003e\n\u003cli\u003eDurable, Chrome-Plated Dual Pumps\u003c\/li\u003e\n\u003cli\u003eSteel Wheels\u003c\/li\u003e\n\u003cli\u003eFoam Bar Protector\u003c\/li\u003e\n\u003cli\u003eTwo-Piece Handle for Easy Storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eUKCA \/CE\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Age\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e164\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e385\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e710\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e29.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n3T TROLLEY JACK","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56342275228028,"sku":"CTJ3T","price":144.62,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CTJ3T.jpg?v=1771537924"}],"url":"https:\/\/automotopart.co.uk\/collections\/workshop-equipment.oembed?page=6","provider":"AutoMotoPart","version":"1.0","type":"link"}