{"title":"Wrenches \u0026 Bars","description":"\n\u003cp\u003eWrenches and bars apply controlled turning force to nuts, bolts, sockets and service fittings. The category includes open-ended, ring, combination, adjustable, flare-nut and ratcheting spanners, plus breaker bars, sliding T-bars, extension handles and specialist leverage tools. Selecting the correct profile and length reduces fastener damage and helps the user work safely within the tool's intended load.\u003c\/p\u003e\n\u003cp\u003eMetric and imperial sizes are not interchangeable even when they seem close. Six-point rings and sockets grip broad flats for high torque; twelve-point profiles offer more indexing positions but concentrate load differently. Breaker bars provide leverage for initial loosening, while torque wrenches are measuring instruments and should not normally be used as general-purpose breaker bars.\u003c\/p\u003e\n\u003cp\u003eChoose by fastener size and standard, access, expected torque, drive square and application. Confirm jaw or ring profile, head angle, overall length, reversible mechanism, insulation or non-sparking requirement and the bar manufacturer's maximum rating. Restricted access never makes an approximate size acceptable. For brake, fuel and hydraulic unions, a flare-nut wrench supports more of the fitting than an ordinary open jaw.\u003c\/p\u003e\n\u003cp\u003eInspect tools before every high-load task. Spread jaws, cracked rings, twisted shafts, mushroomed striking ends, loose ratchet mechanisms, damaged drive squares or corrosion pits can cause sudden release. A cheater pipe or hammer blow can overload a tool not designed for extension or impact. Never use chrome hand sockets on a powered impact wrench.\u003c\/p\u003e\n\u003cp\u003eSeat the tool fully, pull with balanced footing where possible and keep the load in the intended plane. Use penetrating fluid, heat or impact only when safe for the component and surrounding fuel, electrical and rubber parts. Support the work, wear eye protection and keep hands away from likely pinch points. After loosening, use the specified torque procedure and calibrated wrench for final tightening. Wrenches and bars for practical workshop applications are listed below.\u003c\/p\u003e","products":[{"product_id":"streetwize-swwb1-extending-wheelbrace-chr-van-sockets-gs-tuv","title":"Wheel Brace - Telescopic Extending","description":"\u003cp\u003eThe Wheel Brace - Telescopic Extending is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records CE, ROHS, REACH, GS TUV Compliant technical info and 17\/19mm size. Use Streetwize reference SWWB1 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGS\/TUV approved\u003c\/li\u003e\n\u003cli\u003eAnti-slip handle to assist leverage\u003c\/li\u003e\n\u003cli\u003eChrome drive socket\u003c\/li\u003e\n\u003cli\u003eExtends from 35cm (13.5in.) to 52cm (20.5in.).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCE, ROHS, REACH, GS TUV Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e17\/19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e390\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nLoosen and tighten lug nuts on your vehicles wheels with ease with this Telescopic Extending Wheel Brace. Extends from 13.5in. to 20.5in. and is made from durable chrome steel construction. GS\/TUV approved. Supplied by Streetwize Accessories, the UK's leading supplier of automotive and leisure accessories. We have over 40 years experience in supplying handy accessories for your car, van, motorhome, caravan and home!","brand":"STREETWIZE","offers":[{"title":"1","offer_id":56340910997884,"sku":"SWWB1","price":13.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/SWWB1.jpg?v=1771560360"},{"product_id":"streetwize-swwb2-silver-wheelbrace-17-19-21-23mm-gs-tuv","title":"Wheel Brace - 4 Way - Silver","description":"\u003cp\u003eThe Wheel Brace - 4 Way - Silver is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records CE, ROHS, REACH, GS TUV Compliant technical info. Use Streetwize reference SWWB2 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGS\/TUV Approved\u003c\/li\u003e\n\u003cli\u003eSizes 17mm \u0026amp; 19mm - 21mm \u0026amp; 23mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCE, ROHS, REACH, GS TUV Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nLoosen and tighten lug nuts on your vehicles wheels with ease with this 4 Way Wheel Brace. Features 4 sizes; 17mm, 19mm, 21mm and 23mm and is made from durable chrome steel construction. GS\/TUV approved. Supplied by Streetwize Accessories, the UK's leading supplier of automotive and leisure accessories. We have over 40 years experience in supplying handy accessories for your car, van, motorhome, caravan and home!","brand":"STREETWIZE","offers":[{"title":"1","offer_id":56340911161724,"sku":"SWWB2","price":12.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/SWWB2.jpg?v=1771560362"},{"product_id":"streetwize-swwb3-blue-wheelbrace-17-19-21-23-gs-tuv","title":"Wheel Brace - 4 Way - Blue","description":"\u003cp\u003eThe Wheel Brace - 4 Way - Blue is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records CE, ROHS, REACH, GS TUV Compliant technical info. Use Streetwize reference SWWB3 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGS\/TUV Approved\u003c\/li\u003e\n\u003cli\u003eSizes 17mm \u0026amp; 19mm - 21mm \u0026amp; 23mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCE, ROHS, REACH, GS TUV Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.158\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nLoosen and tighten lug nuts on your vehicles wheels with ease with this 4 Way Wheel Brace. Features 4 sizes; 17mm, 19mm, 21mm and 23mm and is made from durable chrome steel construction. GS\/TUV approved. Supplied by Streetwize Accessories, the UK's leading supplier of automotive and leisure accessories. We have over 40 years experience in supplying handy accessories for your car, van, motorhome, caravan and home!","brand":"STREETWIZE","offers":[{"title":"1","offer_id":56340911358332,"sku":"SWWB3","price":12.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/SWWB3.jpg?v=1771560363"},{"product_id":"streetwize-swwb4-extending-wheelbrace-2-cv-sockets","title":"Wheel Brace - Telescopic Extending","description":"\u003cp\u003eThe Wheel Brace - Telescopic Extending is a catalogued automotive or workshop product that is identified by the product-specific specification recorded for this catalogue entry. Its catalogue specification records CE, ROHS, REACH, GS TUV Compliant technical info and 17\/19mm \u0026amp; 21\/23mm size. Use Streetwize reference SWWB4 when cross-checking the part. Compare the manufacturer reference, dimensions, supplied items and application notes below before ordering; appearance alone is not a reliable way to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGS\/TUV approved\u003c\/li\u003e\n\u003cli\u003eAnti-slip handle to assist leverage\u003c\/li\u003e\n\u003cli\u003eChrome drive socket\u003c\/li\u003e\n\u003cli\u003eExtends from 35cm (13.5in.) to 52cm (20.5in.).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCE, ROHS, REACH, GS TUV Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e17\/19mm \u0026amp; 21\/23mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.062\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nLoosen and tighten lug nuts on your vehicles wheels with ease with this Telescopic Extending Wheel Brace. Extends from 13.5in. to 20.5in. and has 2 additional CV drive sockets (17-19mm \u0026amp; 21-23mm). GS\/TUV approved. Supplied by Streetwize Accessories, the UK's leading supplier of automotive and leisure accessories. We have over 40 years experience in supplying handy accessories for your car, van, motorhome, caravan and home!","brand":"STREETWIZE","offers":[{"title":"1","offer_id":56340911423868,"sku":"SWWB4","price":14.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/SWWB4.jpg?v=1771560365"},{"product_id":"milwaukee-48229214-pry-bar-set-strike-cap-4pc","title":"Pry Bar Set (4pc)","description":"\u003cp\u003eThe Pry Bar Set (4pc) is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 48229214 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll-chrome shafts for increased durability.\u003c\/li\u003e\n\u003cli\u003eComfortable Tri-Lobe handles for better grip.\u003c\/li\u003e\n\u003cli\u003eHammer-ready strike cap improves leverage when working in tight and tricky spaces.\u003c\/li\u003e\n\u003cli\u003eAll-metal core for improved durability.\u003c\/li\u003e\n\u003cli\u003eI-Beam design for added durability.\u003c\/li\u003e\n\u003cli\u003eCurved claw design reduces damage when pulling nails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e713\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.227\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\nPry Bar Set (4pc)","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341029847420,"sku":"48229214","price":79.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48229214.jpg?v=1771523044"},{"product_id":"milwaukee-4932480600-pry-bar-1000mm-long","title":"1000mm Pry Bar - 1 pc","description":"\u003cp\u003eThe 1000mm Pry Bar - 1 pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932480600 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eI-Beam design for added durability.\u003c\/li\u003e\n\u003cli\u003eCurved claw design reduces damage when pulling nails.\u003c\/li\u003e\n\u003cli\u003eAll-chrome shafts for increased durability.\u003c\/li\u003e\n\u003cli\u003eComfortable Tri-Lobe handles for better grip.\u003c\/li\u003e\n\u003cli\u003eHammer-ready strike cap improves leverage when working in tight spaces.\u003c\/li\u003e\n\u003cli\u003eAll-metal core for improved durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e57\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e1093\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1000mm Pry Bar - 1 pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341064384892,"sku":"4932480600","price":151.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932480600.jpg?v=1771523833"},{"product_id":"milwaukee-4932480915-1-2-dr-76mm-chrome-extension","title":"1\/2in. Drive 76mm extension -1pc","description":"\u003cp\u003eThe 1\/2in. Drive 76mm extension -1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 76mm size. Use Milwaukee reference 4932480915 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChrome finish for corrosion and rust protection.\u003c\/li\u003e\n\u003cli\u003eLaser engraved size ID for quick and easy identification.\u003c\/li\u003e\n\u003cli\u003ePrecision knurling located on the shaft and female drive end for better control when hand threading.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e76mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e133\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/2in. Drive 76mm extension -1pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341064548732,"sku":"4932480915","price":15.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932480915.jpg?v=1771523890"},{"product_id":"laser-5935-pry-bar","title":"Pry Bar - 300mm","description":"\u003cp\u003eThe Pry Bar - 300mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Blade width: 15mm Length: 300mm technical info, chrome Vanadium Steel construction, 304 mm length 1, and Blue\/black tool handle colour. Use Laser reference 5935 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlade manufactured from Chrome Vanadium\u003c\/li\u003e\n\u003cli\u003eGo thru strength\u003c\/li\u003e\n\u003cli\u003eSoft ergonomic grip handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eBlade width: 15mm\u003c\/li\u003e \u003cli\u003eLength: 300mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e345\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e69\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eChrome Vanadium Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength 1 [mm]\u003c\/th\u003e\n\u003ctd\u003e304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool Handle Colour\u003c\/th\u003e\n\u003ctd\u003eBlue\/black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"LASER","offers":[{"title":"1","offer_id":56341077393788,"sku":"5935","price":9.6,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/Laser_5935_Pry_Bar_1.jpg?v=1770641523"},{"product_id":"carlyle-hand-tools-cpbf02-2pc-pry-bar-set-10in-and-16in","title":"2 PC Indexing Pry Bar Set","description":"\u003cp\u003eThe 2 PC Indexing Pry Bar Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CPBF02 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable indexable head provides flexibility with incremental angles up to 18 degrees which allows the user to choose up to 11 different angles for prying in different confined spaces\u003c\/li\u003e\n\u003cli\u003eFeatures a precise and sharp blade edge which allows the user to easily break apart tight components\u003c\/li\u003e\n\u003cli\u003eThe ergonomic design reduces user fatigue for safety and increased productivity\u003c\/li\u003e\n\u003cli\u003eIndexing Joint\u003c\/li\u003e\n\u003cli\u003eSharp Tip\u003c\/li\u003e\n\u003cli\u003eErgo Grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e457\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e132\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341078802812,"sku":"CPBF02","price":45.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CPBF02.jpg?v=1771537301"},{"product_id":"carlyle-hand-tools-cpbf10-12in-index-pry-bar-singl-joint","title":"10in Indexing Pry Bar","description":"\u003cp\u003eThe 10in Indexing Pry Bar is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CPBF10 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable indexable head provides flexibility with incremental angles up to 18 degrees which allows the user to choose up to 11 different angles for prying in different confined spaces\u003c\/li\u003e\n\u003cli\u003eFeatures a precise and sharp blade edge which allows the user to easily break apart tight components\u003c\/li\u003e\n\u003cli\u003eThe ergonomic design reduces user fatigue for safety and increased productivity\u003c\/li\u003e\n\u003cli\u003eIndexing Joint\u003c\/li\u003e\n\u003cli\u003eSharp Tip\u003c\/li\u003e\n\u003cli\u003eErgo Grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e228\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.476\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341079163260,"sku":"CPBF10","price":22.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CPBF10.jpg?v=1771537303"},{"product_id":"carlyle-hand-tools-cpbf24-24in-index-pry-bar-singl-joint","title":"24in Indexing Pry Bar","description":"\u003cp\u003eThe 24in Indexing Pry Bar is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference CPBF24 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable indexable head provides flexibility with incremental angles up to 18 degrees which allows the user to choose up to 11 different angles for prying in different confined spaces\u003c\/li\u003e\n\u003cli\u003eFeatures a precise and sharp blade edge which allows the user to easily break apart tight components\u003c\/li\u003e\n\u003cli\u003eThe ergonomic design reduces user fatigue for safety and increased productivity\u003c\/li\u003e\n\u003cli\u003eIndexing Joint\u003c\/li\u003e\n\u003cli\u003eSharp Tip\u003c\/li\u003e\n\u003cli\u003eErgo Grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e96\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e609\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341079556476,"sku":"CPBF24","price":31.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CPBF24.jpg?v=1771537304"},{"product_id":"milwaukee-48227406-150mm-adj-wrench1pc","title":"150mm adjustable wrench.","description":"\u003cp\u003eThe 150mm adjustable wrench. is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 150mm size. Use Milwaukee reference 48227406 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLanyard hole.\u003c\/li\u003e\n\u003cli\u003e8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.\u003c\/li\u003e\n\u003cli\u003ePermanent lasered inch and mm markings for accurate adjustment\u003c\/li\u003e\n\u003cli\u003eParallel jaws won't slip or damage finish surfaces.\u003c\/li\u003e\n\u003cli\u003eSlim head design for reaching into tight spaces.\u003c\/li\u003e\n\u003cli\u003eErgonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.\u003c\/li\u003e\n\u003cli\u003eChrome plating for best-in-class rust protection and increased durability.\u003c\/li\u003e\n\u003cli\u003ePrecision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e231\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e102\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n150 mm Adjustable Wrench - 1 pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341085847932,"sku":"48227406","price":27.14,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48227406.jpg?v=1771523033"},{"product_id":"milwaukee-48227408-200mm-adj-wrench1pc","title":"200mm adjustable wrench.","description":"\u003cp\u003eThe 200mm adjustable wrench. is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 200mm size. Use Milwaukee reference 48227408 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLanyard hole.\u003c\/li\u003e\n\u003cli\u003e8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.\u003c\/li\u003e\n\u003cli\u003ePermanent lasered inch and mm markings for accurate adjustment\u003c\/li\u003e\n\u003cli\u003eParallel jaws won't slip or damage finish surfaces.\u003c\/li\u003e\n\u003cli\u003eSlim head design for reaching into tight spaces.\u003c\/li\u003e\n\u003cli\u003eErgonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.\u003c\/li\u003e\n\u003cli\u003eChrome plating for best-in-class rust protection and increased durability.\u003c\/li\u003e\n\u003cli\u003ePrecision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n200 mm Adjustable Wrench - 1 pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341085946236,"sku":"48227408","price":36.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48227408.jpg?v=1771523035"},{"product_id":"milwaukee-48227410-250mm-adj-wrench1pc","title":"250mm adjustable wrench.","description":"\u003cp\u003eThe 250mm adjustable wrench. is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 250mm size. Use Milwaukee reference 48227410 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLanyard hole.\u003c\/li\u003e\n\u003cli\u003e8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.\u003c\/li\u003e\n\u003cli\u003ePermanent lasered inch and mm markings for accurate adjustment\u003c\/li\u003e\n\u003cli\u003eParallel jaws won't slip or damage finish surfaces.\u003c\/li\u003e\n\u003cli\u003eSlim head design for reaching into tight spaces.\u003c\/li\u003e\n\u003cli\u003eErgonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.\u003c\/li\u003e\n\u003cli\u003eChrome plating for best-in-class rust protection and increased durability.\u003c\/li\u003e\n\u003cli\u003ePrecision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e345\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e123\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n250 mm Adjustable Wrench - 1 pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341086241148,"sku":"48227410","price":43.12,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48227410.jpg?v=1771523037"},{"product_id":"milwaukee-48227412-300mm-adj-wrench1pc","title":"300mm adjustable wrench.","description":"\u003cp\u003eThe 300mm adjustable wrench. is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records 300mm size. Use Milwaukee reference 48227412 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLanyard hole.\u003c\/li\u003e\n\u003cli\u003e8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.\u003c\/li\u003e\n\u003cli\u003ePermanent lasered inch and mm markings for accurate adjustment\u003c\/li\u003e\n\u003cli\u003eParallel jaws won't slip or damage finish surfaces.\u003c\/li\u003e\n\u003cli\u003eSlim head design for reaching into tight spaces.\u003c\/li\u003e\n\u003cli\u003eErgonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.\u003c\/li\u003e\n\u003cli\u003eChrome plating for best-in-class rust protection and increased durability.\u003c\/li\u003e\n\u003cli\u003ePrecision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e362\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e142\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.752\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n300 mm Adjustable Wrench - 1 pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341086470524,"sku":"48227412","price":55.92,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48227412.jpg?v=1771523038"},{"product_id":"milwaukee-48227508-200mm-wide-adj-wrench1pc","title":"200mm wide adjustable wrench.","description":"\u003cp\u003eThe 200mm wide adjustable wrench. is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 48227508 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8″ adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.\u003c\/li\u003e\n\u003cli\u003ePermanent lasered inch and mm markings for accurate adjustment\u003c\/li\u003e\n\u003cli\u003eErgonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.\u003c\/li\u003e\n\u003cli\u003ePrecision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.\u003c\/li\u003e\n\u003cli\u003eParallel jaws won't slip or damage finish surfaces.\u003c\/li\u003e\n\u003cli\u003eSlim head design for reaching into tight spaces.\u003c\/li\u003e\n\u003cli\u003eChrome plating for best-in-class rust protection and increased durability.\u003c\/li\u003e\n\u003cli\u003eLanyard hole.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e132\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n200 mm Wide Adjustable Wrench - 1 pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341086568828,"sku":"48227508","price":39.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/48227508.jpg?v=1771523039"},{"product_id":"milwaukee-4932479648-1-4in-drive-flex-head-rachet-no-r","title":"1\/4in. Drive Flexible Head Ratchet -1pc","description":"\u003cp\u003eThe 1\/4in. Drive Flexible Head Ratchet -1pc is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Milwaukee reference 4932479648 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard and extended handle lengths for easier access in tight spaces or extra leverage.\u003c\/li\u003e\n\u003cli\u003eSlim profile head with flush direction lever offers better accessibility.\u003c\/li\u003e\n\u003cli\u003eVersatile lockable flex head: Switch between 7 locking positions and freely moving head.\u003c\/li\u003e\n\u003cli\u003e90 tooth design with 4 degreeof arc swing for tight work spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e232\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.182\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\n1\/4″ Drive Flexible Head Ratchet -1pc","brand":"MILWAUKEE","offers":[{"title":"1","offer_id":56341095055740,"sku":"4932479648","price":44.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/4932479648.jpg?v=1771523413"},{"product_id":"carlyle-hand-tools-aw12-300mm-adjustable-wrench","title":"300MM Adjustable Wrench","description":"\u003cp\u003eThe 300MM Adjustable Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference AW12 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWrench can be used in extremely tight situations where other wrenches would fail\u003c\/li\u003e\n\u003cli\u003e25% wider jaws providing the ability to work on larger fasteners\u003c\/li\u003e\n\u003cli\u003e60% thicker ergonomic handle design\u003c\/li\u003e\n\u003cli\u003elaser-etched size indexing\u003c\/li\u003e\n\u003cli\u003eFeatures a patented low-rattle design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341098201468,"sku":"AW12","price":12.97,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/AW12.jpg?v=1771534768"},{"product_id":"carlyle-hand-tools-aw4-100mm-adjustable-wrench","title":"100MM Adjustable Wrench","description":"\u003cp\u003eThe 100MM Adjustable Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference AW4 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWrench can be used in extremely tight situations where other wrenches would fail\u003c\/li\u003e\n\u003cli\u003e25% wider jaws providing the ability to work on larger fasteners\u003c\/li\u003e\n\u003cli\u003e60% thicker ergonomic handle design\u003c\/li\u003e\n\u003cli\u003elaser-etched size indexing\u003c\/li\u003e\n\u003cli\u003eFeatures a patented low-rattle design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341098594684,"sku":"AW4","price":7.29,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/AW4.jpg?v=1771534773"},{"product_id":"carlyle-hand-tools-aw8-200mm-adjustable-wrench","title":"200MM Adjustable Wrench","description":"\u003cp\u003eThe 200MM Adjustable Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Use Carlyle hand tools reference AW8 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWrench can be used in extremely tight situations where other wrenches would fail\u003c\/li\u003e\n\u003cli\u003e25% wider jaws providing the ability to work on larger fasteners\u003c\/li\u003e\n\u003cli\u003e60% thicker ergonomic handle design\u003c\/li\u003e\n\u003cli\u003elaser-etched size indexing\u003c\/li\u003e\n\u003cli\u003eFeatures a patented low-rattle design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e206\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341098758524,"sku":"AW8","price":11.4,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/AW8.jpg?v=1771534775"},{"product_id":"carlyle-hand-tools-cadow10m-10mm-angled-open-ended-spanner","title":"10mm Double Open End Angle Wrench","description":"\u003cp\u003eThe 10mm Double Open End Angle Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Polished Chrome Finish technical info. Use Carlyle hand tools reference CADOW10M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eprovides better maneuverability, allows users to position the wrench more comfortably and apply torque with greater ease\u003c\/li\u003e\n\u003cli\u003eAllows for greater access in tight areas\u003c\/li\u003e\n\u003cli\u003eHelps protect the wrench from rust and corrosion, ensuring longevity\u003c\/li\u003e\n\u003cli\u003eClear and easy to read engraving to ensure use of proper size\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds ANSI Standards for strength\u003c\/li\u003e\n\u003cli\u003e30 and 60 degree head angles\u003c\/li\u003e\n\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\n\u003cli\u003eDouble One Size Openings\u003c\/li\u003e\n\u003cli\u003eSize etched on side\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e114\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.0362\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341098889596,"sku":"CADOW10M","price":8.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CADOW10M.jpg?v=1771535683"},{"product_id":"carlyle-hand-tools-cadow13m-13mm-angled-open-ended-spanner","title":"13mm Double Open End Angle Wrench","description":"\u003cp\u003eThe 13mm Double Open End Angle Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Polished Chrome Finish technical info. Use Carlyle hand tools reference CADOW13M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eprovides better maneuverability, allows users to position the wrench more comfortably and apply torque with greater ease\u003c\/li\u003e\n\u003cli\u003eAllows for greater access in tight areas\u003c\/li\u003e\n\u003cli\u003eHelps protect the wrench from rust and corrosion, ensuring longevity\u003c\/li\u003e\n\u003cli\u003eClear and easy to read engraving to ensure use of proper size\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds ANSI Standards for strength\u003c\/li\u003e\n\u003cli\u003e30 and 60 degree head angles\u003c\/li\u003e\n\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\n\u003cli\u003eDouble One Size Openings\u003c\/li\u003e\n\u003cli\u003eSize etched on side\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.0362\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341100003708,"sku":"CADOW13M","price":8.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CADOW13M.jpg?v=1771535684"},{"product_id":"carlyle-hand-tools-cadow14m-14mm-angled-open-ended-spanner","title":"14mm Double Open End Angle Wrench","description":"\u003cp\u003eThe 14mm Double Open End Angle Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Polished Chrome Finish technical info. Use Carlyle hand tools reference CADOW14M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eprovides better maneuverability, allows users to position the wrench more comfortably and apply torque with greater ease\u003c\/li\u003e\n\u003cli\u003eAllows for greater access in tight areas\u003c\/li\u003e\n\u003cli\u003eHelps protect the wrench from rust and corrosion, ensuring longevity\u003c\/li\u003e\n\u003cli\u003eClear and easy to read engraving to ensure use of proper size\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds ANSI Standards for strength\u003c\/li\u003e\n\u003cli\u003e30 and 60 degree head angles\u003c\/li\u003e\n\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\n\u003cli\u003eDouble One Size Openings\u003c\/li\u003e\n\u003cli\u003eSize etched on side\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.0816\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341100560764,"sku":"CADOW14M","price":8.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CADOW14M.jpg?v=1771535687"},{"product_id":"carlyle-hand-tools-cadow15m-15mm-angled-open-ended-spanner","title":"15mm Double Open End Angle Wrench","description":"\u003cp\u003eThe 15mm Double Open End Angle Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Polished Chrome Finish technical info. Use Carlyle hand tools reference CADOW15M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eprovides better maneuverability, allows users to position the wrench more comfortably and apply torque with greater ease\u003c\/li\u003e\n\u003cli\u003eAllows for greater access in tight areas\u003c\/li\u003e\n\u003cli\u003eHelps protect the wrench from rust and corrosion, ensuring longevity\u003c\/li\u003e\n\u003cli\u003eClear and easy to read engraving to ensure use of proper size\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds ANSI Standards for strength\u003c\/li\u003e\n\u003cli\u003e30 and 60 degree head angles\u003c\/li\u003e\n\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\n\u003cli\u003eDouble One Size Openings\u003c\/li\u003e\n\u003cli\u003eSize etched on side\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.1133\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341101052284,"sku":"CADOW15M","price":8.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CADOW15M.jpg?v=1771535687"},{"product_id":"carlyle-hand-tools-cadow17m-17mm-angled-open-ended-spanner","title":"17mm Double Open End Angle Wrench","description":"\u003cp\u003eThe 17mm Double Open End Angle Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Polished Chrome Finish technical info. Use Carlyle hand tools reference CADOW17M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eprovides better maneuverability, allows users to position the wrench more comfortably and apply torque with greater ease\u003c\/li\u003e\n\u003cli\u003eAllows for greater access in tight areas\u003c\/li\u003e\n\u003cli\u003eHelps protect the wrench from rust and corrosion, ensuring longevity\u003c\/li\u003e\n\u003cli\u003eClear and easy to read engraving to ensure use of proper size\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds ANSI Standards for strength\u003c\/li\u003e\n\u003cli\u003e30 and 60 degree head angles\u003c\/li\u003e\n\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\n\u003cli\u003eDouble One Size Openings\u003c\/li\u003e\n\u003cli\u003eSize etched on side\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e152\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.127\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341101248892,"sku":"CADOW17M","price":8.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CADOW17M.jpg?v=1771535689"},{"product_id":"carlyle-hand-tools-cadows7m-7-pc-angle-wrench-set","title":"7 PC Metric Double Open End Angle Wrench Set","description":"\u003cp\u003eThe 7 PC Metric Double Open End Angle Wrench Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Polished Chrome Finish technical info. Use Carlyle hand tools reference CADOWS7M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eprovides better maneuverability, allows users to position the wrench more comfortably and apply torque with greater ease\u003c\/li\u003e\n\u003cli\u003eAllows for greater access in tight areas\u003c\/li\u003e\n\u003cli\u003eHelps protect the wrench from rust and corrosion, ensuring longevity\u003c\/li\u003e\n\u003cli\u003eClear and easy to read engraving to ensure use of proper size\u003c\/li\u003e\n\u003cli\u003eEases transportation and provides storage solution\u003c\/li\u003e\n\u003cli\u003e30 and 60 degree head angles\u003c\/li\u003e\n\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\n\u003cli\u003eDouble One Size Openings\u003c\/li\u003e\n\u003cli\u003eSize etched on side\u003c\/li\u003e\n\u003cli\u003e10mm to 17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003ePolished Chrome Finish\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.6985\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341101314428,"sku":"CADOWS7M","price":26.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CADOWS7M.jpg?v=1771535690"},{"product_id":"carlyle-hand-tools-caw10-250mm-adjustable-wrench","title":"10in Adjustable Wrench","description":"\u003cp\u003eThe 10in Adjustable Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records CR-V Material technical info. Use Carlyle hand tools reference CAW10 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow rattle, precision jaws provide secure grip\u003c\/li\u003e\n\u003cli\u003eLaser etched marking show fastener sizes\u003c\/li\u003e\n\u003cli\u003e60% thicker handles for comfort\u003c\/li\u003e\n\u003cli\u003e25% wider jaws for working on larger fasteners\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant\u003c\/li\u003e\n\u003cli\u003ePrecision Jaws\u003c\/li\u003e\n\u003cli\u003eLaser Etch Scales\u003c\/li\u003e\n\u003cli\u003eThick Handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCR-V Material\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e254\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.398\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341101511036,"sku":"CAW10","price":17.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CAW10.jpg?v=1771535741"},{"product_id":"carlyle-hand-tools-caw12-300mm-adjustable-wrench","title":"1in Adjustable Wrench","description":"\u003cp\u003eThe 1in Adjustable Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records CR-V Material technical info. Use Carlyle hand tools reference CAW12 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow rattle, precision jaws provide secure grip\u003c\/li\u003e\n\u003cli\u003eLaser etched marking show fastener sizes\u003c\/li\u003e\n\u003cli\u003e60% thicker handles for comfort\u003c\/li\u003e\n\u003cli\u003e25% wider jaws for working on larger fasteners\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant\u003c\/li\u003e\n\u003cli\u003ePrecision Jaws\u003c\/li\u003e\n\u003cli\u003eLaser Etch Scales\u003c\/li\u003e\n\u003cli\u003eThick Handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCR-V Material\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e83\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341102002556,"sku":"CAW12","price":21.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CAW12.jpg?v=1771535743"},{"product_id":"carlyle-hand-tools-caw4-100mm-adjustable-wrench","title":"4in Adjustable Wrench","description":"\u003cp\u003eThe 4in Adjustable Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records CR-V Material technical info. Use Carlyle hand tools reference CAW4 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow rattle, precision jaws provide secure grip\u003c\/li\u003e\n\u003cli\u003eLaser etched marking show fastener sizes\u003c\/li\u003e\n\u003cli\u003e60% thicker handles for comfort\u003c\/li\u003e\n\u003cli\u003e25% wider jaws for working on larger fasteners\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant\u003c\/li\u003e\n\u003cli\u003ePrecision Jaws\u003c\/li\u003e\n\u003cli\u003eLaser Etch Scales\u003c\/li\u003e\n\u003cli\u003eThick Handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCR-V Material\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.055\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341102264700,"sku":"CAW4","price":12.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CAW4.jpg?v=1771535745"},{"product_id":"carlyle-hand-tools-caw6-150mm-adjustable-wrench","title":"6in Adjustable Wrench","description":"\u003cp\u003eThe 6in Adjustable Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records CR-V Material technical info. Use Carlyle hand tools reference CAW6 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow rattle, precision jaws provide secure grip\u003c\/li\u003e\n\u003cli\u003eLaser etched marking show fastener sizes\u003c\/li\u003e\n\u003cli\u003e60% thicker handles for comfort\u003c\/li\u003e\n\u003cli\u003e25% wider jaws for working on larger fasteners\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant\u003c\/li\u003e\n\u003cli\u003ePrecision Jaws\u003c\/li\u003e\n\u003cli\u003eLaser Etch Scales\u003c\/li\u003e\n\u003cli\u003eThick Handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCR-V Material\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e157\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e51\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341102494076,"sku":"CAW6","price":12.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CAW6.jpg?v=1771535746"},{"product_id":"carlyle-hand-tools-caw8-200mm-adjustable-wrench","title":"8in Adjustable Wrench","description":"\u003cp\u003eThe 8in Adjustable Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records CR-V Material technical info. Use Carlyle hand tools reference CAW8 when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow rattle, precision jaws provide secure grip\u003c\/li\u003e\n\u003cli\u003eLaser etched marking show fastener sizes\u003c\/li\u003e\n\u003cli\u003e60% thicker handles for comfort\u003c\/li\u003e\n\u003cli\u003e25% wider jaws for working on larger fasteners\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant\u003c\/li\u003e\n\u003cli\u003ePrecision Jaws\u003c\/li\u003e\n\u003cli\u003eLaser Etch Scales\u003c\/li\u003e\n\u003cli\u003eThick Handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eCR-V Material\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e206\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.249\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341102625148,"sku":"CAW8","price":15.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CAW8.jpg?v=1771535747"},{"product_id":"carlyle-hand-tools-ccf3810m-3-8dr-10mm-crows-foot-spanner","title":"3\/8in Drive 10mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 10mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3810M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341103870332,"sku":"CCF3810M","price":9.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCF3810M.jpg?v=1771535873"},{"product_id":"carlyle-hand-tools-ccf3811m-3-8dr-11mm-crows-foot-spanner","title":"3\/8in Drive 11mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 11mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3811M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341103968636,"sku":"CCF3811M","price":9.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCF3811M.jpg?v=1771535874"},{"product_id":"carlyle-hand-tools-ccf3812m-3-8dr-12mm-crows-foot-spanner","title":"3\/8in Drive 12mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 12mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3812M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341104132476,"sku":"CCF3812M","price":9.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCF3812M.jpg?v=1771535875"},{"product_id":"carlyle-hand-tools-ccf3813m-3-8dr-13mm-crows-foot-spanner","title":"3\/8in Drive 13mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 13mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3813M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341104296316,"sku":"CCF3813M","price":9.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCF3813M.jpg?v=1771535877"},{"product_id":"carlyle-hand-tools-ccf3814m-3-8dr-14mm-crows-foot-spanner","title":"3\/8in Drive 14mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 14mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3814M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341104427388,"sku":"CCF3814M","price":10.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CF3814M.jpg?v=1771535878"},{"product_id":"carlyle-hand-tools-ccf3815m-3-8dr-15mm-crows-foot-spanner","title":"3\/8in Drive 15mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 15mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3815M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341104918908,"sku":"CCF3815M","price":10.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCF3815M.jpg?v=1771535879"},{"product_id":"carlyle-hand-tools-ccf3816m-3-8dr-16mm-crows-foot-spanner","title":"3\/8in Drive 16mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 16mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3816M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341105443196,"sku":"CCF3816M","price":10.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCF3816M.jpg?v=1771535881"},{"product_id":"carlyle-hand-tools-ccf3817m-3-8dr-17mm-crows-foot-spanner","title":"3\/8in Drive 17mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 17mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3817M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341106459004,"sku":"CCF3817M","price":10.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCF3817M.jpg?v=1771535882"},{"product_id":"carlyle-hand-tools-ccf3818m-3-8dr-18mm-crows-foot-spanner","title":"3\/8in Drive 18mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 18mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3818M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e51\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341106884988,"sku":"CCF3818M","price":10.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCF3818M.jpg?v=1771535884"},{"product_id":"carlyle-hand-tools-ccf3819m-3-8dr-19mm-crows-foot-spanner","title":"3\/8in Drive 19mm Open-End Crowfoot Wrench","description":"\u003cp\u003eThe 3\/8in Drive 19mm Open-End Crowfoot Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records Mirror Polish Chrome-Plated technical info. Use Carlyle hand tools reference CCF3819M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEases use in Hard-To-Reach Areas\u003c\/li\u003e\n\u003cli\u003eMirror polish chrome-plated finish prevents rust\u003c\/li\u003e\n\u003cli\u003eCompatible with all 3\/8” Drive torque wrenches\u003c\/li\u003e\n\u003cli\u003eOpen-Ended\u003c\/li\u003e\n\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\n\u003cli\u003e3\/8in. Drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eMirror Polish Chrome-Plated\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341107114364,"sku":"CCF3819M","price":10.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCF3819M.jpg?v=1771535885"},{"product_id":"carlyle-hand-tools-ccw1211m-11pc-12pt-combi-wrench-set-metric","title":"11 PC Metric 12 PT Combination Wrench Set 9 to 19mm","description":"\u003cp\u003eThe 11 PC Metric 12 PT Combination Wrench Set 9 to 19mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records ASME Compliant technical info. Use Carlyle hand tools reference CCW1211M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality hot-forging process provides a performance exceeding ASME standard\u003c\/li\u003e\n\u003cli\u003eSet contains 11 popular 12 points metric sizes for technician\u003c\/li\u003e\n\u003cli\u003eHigh visibility color filled size mark for easy identification during use\u003c\/li\u003e\n\u003cli\u003ePremium Chrome Finish\u003c\/li\u003e\n\u003cli\u003e15 degree offset box end\u003c\/li\u003e\n\u003cli\u003eAnti-Slip and radius corners on open end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eASME Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e305\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.383\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341107442044,"sku":"CCW1211M","price":42.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCW1211M.jpg?v=1771535936"},{"product_id":"carlyle-hand-tools-ccw1219m-19pc-12pt-combi-wrench-set-metric","title":"19 PC Metric 12 PT Combination Wrench Set","description":"\u003cp\u003eThe 19 PC Metric 12 PT Combination Wrench Set is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records ASME Compliant technical info. Use Carlyle hand tools reference CCW1219M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality hot-forging process provides a performance exceeding ASME standard\u003c\/li\u003e\n\u003cli\u003eFull popular range of metric sizes fits most circumstances\u003c\/li\u003e\n\u003cli\u003eHigh visibility colour filled size mark for easy identification during use\u003c\/li\u003e\n\u003cli\u003ePremium Chrome Finish\u003c\/li\u003e\n\u003cli\u003e15 degree offset box end\u003c\/li\u003e\n\u003cli\u003eAnti-Slip and radius corners on open end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eASME Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e457\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.316\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341107868028,"sku":"CCW1219M","price":83.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCW1219M.jpg?v=1771535937"},{"product_id":"carlyle-hand-tools-ccw613m-13pc-6point-combi-spanner-7-to-19mm","title":"13 PC Metric 6 PT Combination Wrench Set 7mm to 19mm","description":"\u003cp\u003eThe 13 PC Metric 6 PT Combination Wrench Set 7mm to 19mm is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records ASME Compliant 7mm to 19mm technical info. Use Carlyle hand tools reference CCW613M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality hot-forging process provides a performance exceeding ASME standard\u003c\/li\u003e\n\u003cli\u003ePopular range of metric sizes fits most circumstances\u003c\/li\u003e\n\u003cli\u003eHigh visibility color filled size mark for easy identification during use\u003c\/li\u003e\n\u003cli\u003ePremium Chrome Finish\u003c\/li\u003e\n\u003cli\u003e15 degree offset box end\u003c\/li\u003e\n\u003cli\u003eAnti-Slip and radius corners on open end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eASME Compliant\u003c\/li\u003e \u003cli\u003e7mm to 19mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e305\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e38\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.744\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341107999100,"sku":"CCW613M","price":43.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCW613M.jpg?v=1771535938"},{"product_id":"carlyle-hand-tools-ccwfp007m-7mm-6-point-combination-spanner","title":"6 PT 7mm Combination Wrench","description":"\u003cp\u003eThe 6 PT 7mm Combination Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records ASME Compliant technical info. Use Carlyle hand tools reference CCWFP007M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality hot-forging process provides a performance\u003c\/li\u003e\n\u003cli\u003ePremium chrome finish to protect against corrosion\u003c\/li\u003e\n\u003cli\u003eHigh visibility colour filled size mark for easy identification during use\u003c\/li\u003e\n\u003cli\u003ePremium Chrome Finish\u003c\/li\u003e\n\u003cli\u003e15 degree offset box end\u003c\/li\u003e\n\u003cli\u003eAnti-Slip and radius corners on open end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eASME Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e132\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.0362\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341108130172,"sku":"CCWFP007M","price":8.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCWFP_1.jpg?v=1771535939"},{"product_id":"carlyle-hand-tools-ccwfp008m-8mm-6-point-combination-spanner","title":"6 PT 8mm Combination Wrench","description":"\u003cp\u003eThe 6 PT 8mm Combination Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records ASME Compliant technical info. Use Carlyle hand tools reference CCWFP008M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality hot-forging process provides a performance\u003c\/li\u003e\n\u003cli\u003ePremium chrome finish to protect against corrosion\u003c\/li\u003e\n\u003cli\u003eHigh visibility colour filled size mark for easy identification during use\u003c\/li\u003e\n\u003cli\u003ePremium Chrome Finish\u003c\/li\u003e\n\u003cli\u003e15 degree offset box end\u003c\/li\u003e\n\u003cli\u003eAnti-Slip and radius corners on open end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eASME Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.036\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341108425084,"sku":"CCWFP008M","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCWFP_1_6d90875c-4726-4020-b245-ad96d6675358.jpg?v=1771535941"},{"product_id":"carlyle-hand-tools-ccwfp009m-9mm-6-point-combination-spanner","title":"6 PT 9mm Combination Wrench","description":"\u003cp\u003eThe 6 PT 9mm Combination Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records ASME Compliant technical info. Use Carlyle hand tools reference CCWFP009M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality hot-forging process provides a performance\u003c\/li\u003e\n\u003cli\u003ePremium chrome finish to protect against corrosion\u003c\/li\u003e\n\u003cli\u003eHigh visibility colour filled size mark for easy identification during use\u003c\/li\u003e\n\u003cli\u003ePremium Chrome Finish\u003c\/li\u003e\n\u003cli\u003e15 degree offset box end\u003c\/li\u003e\n\u003cli\u003eAnti-Slip and radius corners on open end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eASME Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e149\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.036\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341108490620,"sku":"CCWFP009M","price":9.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCWFP_1_491a2126-4d43-4500-bd37-4d371b7585d2.jpg?v=1771535943"},{"product_id":"carlyle-hand-tools-ccwfp011m-11mm-6-point-combination-spanner","title":"6 PT 11mm Combination Wrench","description":"\u003cp\u003eThe 6 PT 11mm Combination Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records ASME Compliant technical info. Use Carlyle hand tools reference CCWFP011M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality hot-forging process provides a performance\u003c\/li\u003e\n\u003cli\u003ePremium chrome finish to protect against corrosion\u003c\/li\u003e\n\u003cli\u003eHigh visibility colour filled size mark for easy identification during use\u003c\/li\u003e\n\u003cli\u003ePremium Chrome Finish\u003c\/li\u003e\n\u003cli\u003e15 degree offset box end\u003c\/li\u003e\n\u003cli\u003eAnti-Slip and radius corners on open end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eASME Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e165\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341108818300,"sku":"CCWFP011M","price":9.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCWFP_1_bb5ec37c-f687-4e2b-ba30-93de966395f7.jpg?v=1771535945"},{"product_id":"carlyle-hand-tools-ccwfp012m-12mm-6-point-combination-spanner","title":"6 PT 12mm Combination Wrench","description":"\u003cp\u003eThe 6 PT 12mm Combination Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records ASME Compliant technical info. Use Carlyle hand tools reference CCWFP012M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality hot-forging process provides a performance\u003c\/li\u003e\n\u003cli\u003ePremium chrome finish to protect against corrosion\u003c\/li\u003e\n\u003cli\u003eHigh visibility colour filled size mark for easy identification during use\u003c\/li\u003e\n\u003cli\u003ePremium Chrome Finish\u003c\/li\u003e\n\u003cli\u003e15 degree offset box end\u003c\/li\u003e\n\u003cli\u003eAnti-Slip and radius corners on open end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eASME Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e171\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341108949372,"sku":"CCWFP012M","price":9.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCWFP_1_d27270b4-d5f7-42ed-af69-69571c3ebbde.jpg?v=1771535947"},{"product_id":"carlyle-hand-tools-ccwfp013m-13mm-6-point-combination-spanner","title":"6 PT 13mm Combination Wrench","description":"\u003cp\u003eThe 6 PT 13mm Combination Wrench is a workshop tool or accessory that is intended for the task and working range stated in its catalogue specification. Its catalogue specification records ASME Compliant technical info. Use Carlyle hand tools reference CCWFP013M when cross-checking the part. Check the reference, dimensions, drive or working size, material and included pieces before ordering, and always use the tool within its stated rating with suitable personal protective equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality hot-forging process provides a performance\u003c\/li\u003e\n\u003cli\u003ePremium chrome finish to protect against corrosion\u003c\/li\u003e\n\u003cli\u003eHigh visibility colour filled size mark for easy identification during use\u003c\/li\u003e\n\u003cli\u003ePremium Chrome Finish\u003c\/li\u003e\n\u003cli\u003e15 degree offset box end\u003c\/li\u003e\n\u003cli\u003eAnti-Slip and radius corners on open end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"specs\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnical Info\u003c\/th\u003e\n\u003ctd\u003e\u003cul\u003e\u003cli\u003eASME Compliant\u003c\/li\u003e\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e177\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"CARLYLE HAND TOOLS","offers":[{"title":"1","offer_id":56341109113212,"sku":"CCWFP013M","price":10.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/8407\/8972\/files\/CCWFP_1_c8be1e83-a45f-4d2e-82f1-19200c971e70.jpg?v=1771535949"}],"url":"https:\/\/automotopart.co.uk\/collections\/wrenches-bars.oembed?page=2","provider":"AutoMotoPart","version":"1.0","type":"link"}