VAUXHALL MOKKA Car Parts
Your Current Vehicle
Or
VAUXHALL MOKKA Engine Variants
Choose the exact engine, power output and production period before viewing compatible parts.
VAUXHALL MOKKA Part Categories
Every link retains this exact body-generation level and appears only where matching catalogue products exist.
VAUXHALL MOKKA Parts Catalogue
Browse catalogue-backed parts by vehicle system.
Catalogue-Matched Parts for This Vehicle
Compare up to ten catalogue-backed products. Confirm the exact vehicle and complete technical specification before ordering.
Vehicle Parts and Compatibility Guide
Catalogue-backed identification, maintenance and safety guidance.
VAUXHALL MOKKA vehicle and engine options
This page represents the exact MOKKA body series within the VAUXHALL MOKKA family. The catalogue records 9 exact engine or power variants. Select the correct output and production period before opening the filtered collection.
| Engine option | Power | Capacity (cc) | Production period |
|---|---|---|---|
| 1.2 (76) | 101 | 1199 | manufactured from 10/2020 |
| 1.5 (76) | 110 | 1499 | manufactured from 10/2020 |
| 1.2 (76) | 131 | 1199 | manufactured from 10/2020 |
| 1.2 (76) | 136 | 1199 | manufactured from 12/2022 |
| 1.2 Hybrid | 136 | 1199 | manufactured from 12/2024 |
| MOKKA-e (76) | 136 | — | manufactured from 06/2020 |
| 1.2 Hybrid | 145 | 1199 | manufactured from 04/2025 |
| MOKKA-e (76) | 156 | — | manufactured from 10/2023 |
| GSE | 281 | — | manufactured from 09/2025 |
Catalogue-backed part categories
- Brake Discs — 19 catalogue matches
- Brake Pads — 19 catalogue matches
- Air Filter — 8 catalogue matches
- Transmission — 8 catalogue matches
- Suspension & Steering — 8 catalogue matches
- Cabin Filter — 6 catalogue matches
- Tie Rod End — 5 catalogue matches
- Wheel Bearing Kit — 5 catalogue matches
- Fuel filter — 4 catalogue matches
- Oil Filters — 4 catalogue matches
- Water Pump — 4 catalogue matches
- AC Compressor — 3 catalogue matches
- Condensor — 3 catalogue matches
- Lambda Sensor — 3 catalogue matches
- NOX Sensor — 3 catalogue matches
- Radiator Hose — 3 catalogue matches
- Suspension Arms — 3 catalogue matches
- Ball Joints — 2 catalogue matches
- Car Sensors & Switches — 2 catalogue matches
- Drive Belt Tensioner — 2 catalogue matches
How to confirm compatibility
Use the registration or VIN as a starting point, then confirm the complete engine and transmission identifiers, production month, body style, driven wheels and factory equipment. Compare the complete replacement reference, dimensions, position, connectors and technical notes. A similar photograph or matching model name is not sufficient by itself.
How vehicle systems differ within one body series
| System | Fitment controls | Checks before ordering or fitting |
|---|---|---|
| Brakes | Axle, disc dimensions, caliper and performance option | Measure installed hardware and inspect hoses, sliders and sensors. |
| Suspension and steering | Body, axle load, driven wheels and adaptive equipment | Check springs, dampers, joints, bushes, tyres and alignment. |
| Filters and engine service | Complete engine code, housing and emissions specification | Compare dimensions, seals, oil approval and service notes. |
| Cooling and heating | Engine, gearbox, air conditioning and circuit layout | Confirm connections and diagnose leaks or overheating causes. |
| Electrical and lighting | Market, steering side, connector, control system and options | Test power, earth, wiring and required coding or calibration. |
| Transmission and driveline | Gearbox code, driven axles, shaft and final-drive arrangement | Identify each assembly and its fluid and filling procedure. |
Fault symptoms and urgency
| Symptom | Possible checks | Urgency |
|---|---|---|
| Red oil-pressure, temperature, braking or steering warning | Stop conditions, fluid loss, pressure, overheating and control integrity | Stop safely and investigate before continuing. |
| Grinding brakes or serious pulling | Friction parts, calipers, hydraulics, bearings and tyres | Do not continue if braking is materially impaired. |
| Severe vibration, looseness or unstable handling | Wheels, tyres, bearings, suspension, steering and driveline | Arrange prompt inspection; stop if control is compromised. |
| Engine warning and reduced performance | Saved codes, intake, fuel, ignition, boost and emissions systems | Diagnose promptly and avoid parts replacement from code wording alone. |
| Coolant, fuel, brake-fluid or oil leak | Source, level, pressure, contamination and affected components | Assess before driving; fuel and brake leaks require immediate action. |
Materials, fluids and construction choices
The correct part can vary in material, coating, seal design, connector, reinforcement and mounting arrangement. These differences can control heat resistance, corrosion protection, stiffness or electrical compatibility. Do not substitute a visually similar component without matching the full application and technical specification. Renew required seals and single-use fasteners and follow the specified tightening sequence.
Engine oil needs the required approval as well as viscosity. Coolant chemistry, brake-fluid grade, transmission oil, differential lubricant and other service fluids must match the exact unit. Fluid colour is not a specification. Follow the stated filling, temperature, bleeding and level-check procedure and record the product, quantity, date and mileage.
Maintenance and repair workflow
- Save the vehicle identity, installed reference, symptoms and diagnostic evidence.
- Select the exact engine or power variant shown above.
- Review production splits, equipment restrictions and supersessions.
- Inspect connected components and determine the cause of the fault.
- Fit using suitable tools, new seals and the stated torque procedure.
- Complete any required bleeding, alignment, coding, adaptation or calibration.
- Verify fluid levels, leaks, warning lamps, noise and safe operation.
Common selection and repair mistakes
- Using the body-series name without the exact engine and production period.
- Choosing by photograph, diameter or connector alone.
- Ignoring axle, side, steering-side or gearbox restrictions.
- Mixing fluids by colour or broad universal wording.
- Replacing a sensor without testing its wiring, supply and underlying system.
- Clearing fault information before saving the evidence.
- Skipping alignment or electronic calibration after related work.
Inspection and fitting guidance
Inspect adjacent components, mountings, seals, wiring, hoses and fluid condition as applicable. Diagnose why the original part failed and follow current vehicle and component-manufacturer procedures. Safety-related, emissions, refrigerant, restraint and high-voltage work may require specialist tools, calibration or qualified handling.
UK roadworthiness notes
The MOT checks relevant braking, steering, suspension, tyre, lighting, visibility, restraint and emissions items, but it does not confirm every part reference or maintenance requirement. Complete any required alignment, coding or calibration after repair and verify safe operation before returning the vehicle to normal traffic.
Modifications must preserve wheel clearance, axle loads, tyre compatibility, braking balance, lighting approval, emissions equipment and assistance-system operation. Notify the insurer where required. Removing a required catalyst, particulate filter or SCR function is not an acceptable upgrade.
VAUXHALL MOKKA parts FAQs
Can the body-series name confirm an engine part?
No. Select the exact engine, output and production period.
Can registration lookup be used alone?
Use it as a starting point, then verify the VIN, engine and installed equipment.
Why do two versions with the same power need different parts?
Production revisions, emissions systems, gearbox and equipment can still differ.
Are product photographs final fitment proof?
No. Match the full reference, dimensions, connections and catalogue notes.
Should fault codes be cleared before testing?
No. Save codes and operating context first.
Does an MOT pass confirm every service item?
No. It does not verify complete maintenance, fluid specifications or every compatibility detail.
When should the vehicle not be driven?
Stop for materially impaired brakes or steering, serious fluid leaks, overheating, severe looseness or red safety warnings.
Can universal coolant or gearbox oil be used?
Only if it explicitly meets the exact required specification and procedure.
When is coding or calibration needed?
It depends on the system; batteries, steering, suspension and driver-assistance repairs can require it.
Who should handle high-voltage or refrigerant work?
A suitably trained and equipped technician using the prescribed isolation and recovery procedures.