7 Products
NILCO
Nilco products on this page divide into three Nilglass Glass & Mirror Cleaner sizes and four Power Fresh air-freshener fragrances. Nilglass is listed in a 500 ml trigger bottle, one-litre bottle and five-litre bulk container. Power Fresh comes as 750 ml aerosols in Citrus, Cranberry, Lavender and Spring Bouquet. The liquid cleaner is for removing grease, dirt and marks from supported glass, mirrors and reflective hard surfaces; the aerosols provide a high-volume fragrance burst for large industrial or janitorial areas. Neither product family substitutes for the other.
Choose Nilglass by surface, soil, dispensing format and cleaning method; choose Power Fresh by area, ventilation, occupancy, fragrance policy and the exact aerosol safety data. The current AutoMotoPart selection contains 7 Nilco items, led by 4 fragrance-aerosol entries and 3 glass-cleaner entries. These Nilco figures describe the range on this page rather than every product the brand may make elsewhere.
Nilco's Nilglass instructions say to use it sparingly, work a manageable area with a soft lint-free absorbent cloth, then buff dry while turning the cloth. The product should not be diluted, used in strong direct sunlight or allowed to dry on the surface. Test an inconspicuous area where coatings, tint films, plastics, screens or polished finishes may be sensitive. For the five-litre pack, decant only into a clean compatible labelled trigger bottle and close the bulk cap promptly. Do not reuse food or drink containers.
Power Fresh should not be used to conceal a fuel, drain, mould, overheating or chemical odour that needs investigation. Ventilate, remove people who may be sensitive to fragrance, keep the aerosol away from heat, ignition and direct sunlight, and never spray towards faces, animals, food, hot surfaces or live work. Follow the can for burst duration and room re-entry rather than using a long consumer-style spray by assumption. Store all products upright and secure. The guide below is neutral; the exact Nilco label, current safety data and workplace COSHH assessment control use.
Your Current Vehicle
Or
Select Your Vehicle
Popular Part Types
Only part types stocked for this brand are shown.
Car Parts Categories
Browse the main catalogue areas in which this brand has matching products.
Other popular manufacturers of aftermarket automotive parts
Explore established alternatives with related products in the current catalogue.
Nilco: understand the range before choosing
Nilco supplies professional housekeeping products. The current AutoMotoPart page contains two unrelated functions: H3 Nilglass liquid cleaner for glass, mirrors and supported hard non-porous surfaces, and H12 Power Fresh 750 ml air-freshener aerosols in citrus, cranberry, lavender and spring fragrances. Cleaner format, aerosol hazards and intended outcome must remain separate.
AutoMotoPart currently lists 7 Nilco items. The largest Nilco groups are 4 fragrance-aerosol entries and 3 glass-cleaner entries. Nilco totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact Nilco listing, its current technical information and the item in front of you must agree.
What the Nilco page actually covers
| Product group in this range | Current entries | Selection focus |
|---|---|---|
| Power Fresh fragrance aerosols | 4 | For Power Fresh aerosols, match fragrance, area volume, occupancy/sensitivity, ventilation, burst directions, ignition control and exact H12 safety information. |
| Nilglass glass and mirror cleaner | 3 | For Nilglass, match surface/coating, soil, 500 ml/1 L/5 L dispensing route, undiluted directions, cloth and overspray control. |
Seven products are present: four 750 ml Power Fresh aerosols and three Nilglass liquid formats. The fragrance group is currently the larger set, but Nilglass spans the widest volume range at 500 ml, one litre and five litres. Shared Nilco branding does not indicate common chemistry, application, container pressure or waste handling.
Build a reliable shortlist
Start by defining whether the problem is contamination on a surface or an odour in occupied air. If it is an odour, diagnose and remove the source first. If it is a dirty transparent or reflective surface, identify its coating and surrounding materials before selecting cleaner and cloth.
| Check | Why it matters | Useful evidence |
|---|---|---|
| Function | Cleaning deposits and adding fragrance are different outcomes | Soil/odour source assessment and full Nilco product name |
| Surface | Glass, mirror backing, tint, polycarbonate, screens and polished trim may differ | Manufacturer care instruction and discreet compatibility test |
| Format | Trigger, one-litre and five-litre liquid packs need different handling | Container size, labelled dispenser and controlled decanting |
| Occupancy | Fragrance aerosols can affect people with asthma, sensitivity or scent restrictions | Workplace policy, consultation and ventilation plan |
| Fire/exposure | Aerosol mist, propellant and solvent require can-specific controls | Current safety data, ignition survey and COSHH assessment |
| Waste | Cleaner cloths and aerosol cans follow the contamination and pressurised-container route | Site waste procedure and product safety information |
Do not choose by fragrance strength or bottle volume alone. A large area may need better source control or ventilation rather than more aerosol, while a bulk cleaner pack needs dispensing controls rather than direct pouring onto glass.
Nilglass trigger, one-litre and five-litre formats
The 500 ml trigger is ready for controlled local application. The one-litre title is a larger Nilglass container, while Nilco's official five-litre directions require dispensing into a trigger container. Keep the product name and hazard information on every approved secondary bottle; never top up a bottle containing an unknown cleaner.
The same task may consume very different amounts depending on cloth condition, soil and overspray. Spray sparingly rather than flooding edges, seals or mirror backing. Work from clean upper areas down, turn the cloth frequently and use a separate dry face for final buffing. Replace cloths contaminated with grit, because clear glass can still be scratched by particles carried in the wipe.
Glass, mirrors, windscreens and sensitive finishes
Nilco officially lists most glass, mirrors, windscreens and water-resistant hard non-porous surfaces such as reflective laminates, stainless steel and chrome-plated items. ‘Most’ is not universal compatibility. Check aftermarket tint, anti-reflective coatings, instrument displays, camera lenses, acrylic/polycarbonate and treated windscreens against their manufacturer instructions.
Avoid strong direct sunlight and do not let Nilglass dry before removal. On vehicle glass, prevent liquid from running into dashboard electronics, cameras, speaker openings or mirror housings. Clean both cloth and wiper-contact areas where relevant, but keep the product away from brake, pedal and steering grip surfaces. Inspect from several angles for haze before returning the vehicle.
Power Fresh is an air-freshener aerosol
Citrus, Cranberry, Lavender and Spring Bouquet are scent choices within the 750 ml H12 Power Fresh family. Nilco describes a high-volume burst for large industrial or janitorial areas. That does not prove disinfection, allergen removal, smoke remediation or source elimination. Investigate unusual workshop odours before adding fragrance, especially fuel, battery, electrical or combustion smells.
Plan use when unnecessary occupants are absent and the space can be ventilated. Warn nearby workers and respect fragrance-free areas. Apply only the exact short-burst method on the can, aimed into the supported space and away from surfaces unless the label says otherwise. Never spray inside a vehicle cabin immediately before someone enters, or into ventilation intakes by assumption.
Aerosol ignition, exposure and storage
Read the fragrance-specific safety data before use. Isolate smoking, flames, hot work, heaters, sparks and unsuitable electrical sources within the assessed area. Do not spray into confined spaces or where vapour can collect. General ventilation must be sufficient for the burst and subsequent clearance; fragrance does not demonstrate that vapour levels are safe.
Keep cans upright, cool and protected from sunlight, impact and unauthorised use. Do not pierce, crush, burn or deliberately empty an aerosol, including after it stops spraying. Quarantine leaking or damaged cans using the workplace emergency procedure. Avoid breathing the concentrated spray and use eye/skin or respiratory controls required by the safety data and exposure assessment.
Source control, hygiene and waste
Where an odour comes from waste, drains, damp materials, spills or equipment, isolate and correct that source. Do not aerosolise fragrance over open food, chemical processes or contaminated waste. Clean spillages with the correct method and provide extraction or repair as needed before deciding whether an air freshener is still appropriate.
Nilglass cloths should be segregated from oil, abrasive grit and other cleaners. Dispose of saturated wipes according to what they contain. Return unwanted bulk liquid and aerosols through the site chemical or pressurised-container route, not a surface drain or ordinary recycling bin. Wash hands after handling and keep cleaners and fragrances away from children and food storage.
From identification to a checked result
| Stage | Good practice for this range | Mistake to avoid |
|---|---|---|
| Diagnose | Separate surface soil from an odour source and identify sensitive materials | Spraying fragrance over a leak, fault or hygiene problem |
| Select | Choose H3 Nilglass format or H12 fragrance with exact data | Treating cleaner and air freshener as one Nilco chemical family |
| Prepare | Ventilate/isolate ignition or protect surrounding surfaces and use clean cloths | Using an unlabelled trigger bottle or dirty wipe |
| Apply | Use sparing cleaner/buffing or the exact short aerosol burst | Flooding glass or continuously spraying fragrance |
| Close out | Inspect, ventilate, secure containers and segregate waste | Leaving aerosol vapour or cleaner haze unverified |
Record H3 Nilglass and H12 Power Fresh separately in COSHH and stock systems. Keep fragrance, container size and current data-sheet identity with each product so a 750 ml aerosol is never mistaken for liquid glass cleaner or vice versa.
Reading real Nilco references
The Nilco names below are examples from the current range and show why the complete description matters. They are not universal Nilco recommendations and should not be treated as a fitment list. Within Nilco, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.
| Example listing | What to verify beyond the name |
|---|---|
| Nilco Citrus - Power Fresh - 750Ml Air Freshener Spray | H12 Citrus aerosol, fragrance policy, source diagnosis, ventilation and fire controls |
| Nilco Cranberry Power Fresh Air Freshener - 750Ml | H12 Cranberry aerosol, occupancy, burst directions and can disposal |
| Nilglass Glass & Mirror Cleaner - 1 Litre | H3 Nilglass 1 L, compatible surface, undiluted use and labelled trigger route |
| Nilglass Glass & Mirror Cleaner - 500ml | H3 Nilglass 500 ml trigger, test patch, cloth and overspray |
| Nilglass Glass & Mirror Cleaner - 5 Litre | H3 Nilglass 5 L, controlled decanting, bulk storage and surface method |
| Nilco Lavender - Power Fresh - 750Ml Air Freshener Spray | H12 Lavender aerosol, sensitivity, ventilation and ignition controls |
| Nilco Spring Bouquet Power Fresh Air Freshener - 750Ml | H12 Spring aerosol, area use, occupancy and exact safety data |
The titles clearly separate three Nilglass liquid volumes from four 750 ml Power Fresh aerosols. Preserve H3/H12, format and fragrance in purchasing and safety records; ‘Nilco spray’ is too ambiguous for controlled use.
Common errors around Nilco products
- Using Power Fresh to mask fuel, electrical, damp, waste or chemical odours without investigation.
- Assuming fragrance aerosol disinfects, removes smoke contamination or makes air safe.
- Spraying Power Fresh towards people, animals, food, hot work or ignition sources.
- Applying Nilglass to a coated screen, tint or plastic without compatibility checks.
- Diluting Nilglass or letting it dry on a surface in direct sunlight.
- Pouring from the five-litre pack into an unlabelled or contaminated trigger bottle.
- Using a gritty cloth and scratching glass or reflective trim.
- Piercing an aerosol or placing pressurised cans in ordinary recycling without approval.
Nilco questions and answers
Q: What Nilco products are listed here?
A: Three Nilglass liquid-cleaner sizes and four 750 ml Power Fresh fragrance aerosols.
Q: Is Nilglass an aerosol?
A: The listed Nilglass products are 500 ml trigger, one-litre and five-litre liquid formats.
Q: Can Nilglass be diluted?
A: Nilco's current directions say do not dilute it with water.
Q: Can Nilglass be used in direct sunlight?
A: Nilco says not to apply it in strong direct sunlight or let it dry before removal.
Q: How should the five-litre Nilglass be used?
A: Dispense it into a clean compatible labelled trigger container, close the bulk cap and follow the sparing wipe/buff method.
Q: Is Nilglass safe on every windscreen coating or tint?
A: No universal claim is safe; follow the surface maker's care instructions and test discreetly.
Q: What Power Fresh fragrances are present?
A: Citrus, Cranberry, Lavender and Spring Bouquet, each in a 750 ml aerosol.
Q: Does Power Fresh remove the cause of an odour?
A: No. Diagnose and correct the source first; fragrance is not a repair or hygiene treatment.
Q: Can Power Fresh be sprayed in an occupied room?
A: Follow the workplace assessment, fragrance policy, ventilation and exact can directions; avoid exposing occupants to concentrated spray.
Q: Can the aerosol be used near welding or heaters?
A: No. Remove ignition and hot-work sources from the assessed spraying and clearance area.
Q: How should Power Fresh cans be stored?
A: Keep them upright, cool, secure and protected from sunlight, heat, impact and children.
Q: How should Nilco waste be handled?
A: Classify cleaner wipes by contamination and use approved liquid/aerosol waste routes without piercing cans or pouring to drains.