8 Products
Your Current Vehicle
Or
Unbranded: understand the range before choosing
Unbranded is a product-range label rather than evidence of one manufacturer or shared specification. Seven items here are caravan and camping carriers or accessories; one is continuous listing paper. Selection must therefore come from exact dimensions, capacity, closure, intended contents and individual product instructions, never from an assumed brand history.
AutoMotoPart currently lists 8 Unbranded items. The largest Unbranded groups are 7 caravan & camping entries, 1 office supplies entry. Unbranded totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact Unbranded listing, its current technical information and the item in front of you must agree.
What the Unbranded page actually covers
| Product group in this range | Current entries | Selection focus |
|---|---|---|
| Caravan & Camping | 7 | For caravan and camping carriers, verify capacity, filled mass, closure, tap or vent, upright requirement and dedicated water or waste use. |
| Office Supplies | 1 | For listing paper, match 280mm by 241mm sheet format, sprocket feed, ruling, printer path and 2,000-sheet box quantity. |
Seven of the eight products concern caravan and camping liquids: five translucent can formats, one vent cap and one black waste-water carrier. The remaining office-supply item is continuous paper. Similar words such as cap, carrier or listing do not link their materials, compatibility or safe use.
Build a reliable shortlist
Start with the contents and handling route. Fresh drinking water needs hygienic dedicated equipment; washing water should be separately identified; waste water needs containment and controlled disposal. Then calculate capacity, full weight, tap access, vehicle restraint and storage orientation. Treat the paper product as an entirely separate printer consumable.
| Check | Why it matters | Useful evidence |
|---|---|---|
| Contents | Water, waste, fuel and chemicals demand different approved containers | Exact product statement, permanent label and prior-use history |
| Capacity | A larger vessel becomes heavy and awkward when full | Litres, filled mass, carrying route and user capability |
| Closure | Screw cap, tap and vent perform different functions | Thread, seal, cap retention and leak check |
| Orientation | Some containers may leak if transported or stored on a side | Item instructions and upright restraint plan |
| Hygiene | Cross-contact can contaminate drinking water | Dedicated hose, cap, tap, cleaning and dry storage |
| Paper feed | Continuous stationery depends on printer mechanics and page format | 280mm by 241mm size, sprocket spacing and printer manual |
Do not choose the largest carrier simply to reduce refill trips. A 25-litre water load is substantial before the container is added, and lifting it into a locker or using an unsupported tap can injure the user, strain the vessel or create a spill.
Translucent water-carrier formats
The translucent group provides 5-litre, 9.5-litre and 25-litre screw-cap choices, plus tap-equipped 9.5-litre and 25-litre versions. Translucency can help show level and contamination but is not proof of drinking-water certification. Confirm the exact material and intended use on the supplied information before committing it to potable water.
Inspect moulding seams, handle, thread and seal under bright light. Fill initially with clean water in a controlled place, close it, stand it upright and check for seepage. Empty and rectify any leak before travel. Store out of sunlight where instructed, keep the cap off only while drying and protect the opening from insects, dirt and cleaning chemicals.
Taps, vent caps and controlled flow
A tap allows dispensing without lifting the full carrier, but it also adds a low-level joint vulnerable to impact and leakage. Support the vessel on a stable platform, keep the spout clear of the ground and close it before moving. If a separate transit closure is required, fit it rather than trusting the tap valve in a locker.
The blue vent cap is described as a flow accessory. Match its thread and lock design to the intended can and open it only as required for dispensing. A vent that admits air can also admit contamination or release water during movement. Close, clean and account for it before transport; colour alone does not establish compatibility.
Black waste-water carrier
The 23-litre black carrier is intended beneath a caravan waste outlet and is described as lying on its side in use. That is a product-specific position and must not be transferred to the translucent cans, which carry an upright warning. Confirm whether the required closure is included, because the current evidence notes a separately sold cap.
Use the carrier only for the supported waste stream, not toilet chemicals or hazardous workshop liquid unless explicitly approved. Wear gloves, prevent splashing and close the outlet before moving. Empty at a designated grey-water point under site rules, rinse without contaminating fresh-water hoses and store apart from all potable-water equipment.
Why these are not fuel or chemical cans
UK HSE guidance requires petrol containers to be purpose-suitable, capacity-limited, vapour-tight and permanently marked with petrol and flammability information. The current water-carrier titles and evidence do not establish those features. A plastic shape commonly called a jerry can is therefore not evidence of petrol, diesel or hazardous-goods approval.
Never test chemical compatibility by filling the vessel. Fuels and solvents can permeate, swell or weaken unsuitable plastic and create fire, vapour and environmental hazards. Use only a correctly approved, marked container for the intended hazardous liquid and follow the applicable storage and carriage rules; keep these camping carriers dedicated to their confirmed water roles.
Continuous listing paper is a separate product
The paper entry is a 2,000-sheet continuous box with a 280mm drop and 241mm width. Check whether the printer accepts continuous tractor-feed stationery, the sprocket-hole pitch and whether plain or ruled layout matches the form. Millimetre dimensions should be retained because a near imperial size may feed or paginate differently.
Store the box level and dry, acclimatise it to the print room and protect the edges from crushing. Fan or align only as the printer guidance permits, set page length before a long run and test a small batch. Paper dust, torn sprocket holes and a skewed stack can cause jams; this office item has no meaningful compatibility with the camping carriers.
From identification to a checked result
| Stage | Good practice for this range | Mistake to avoid |
|---|---|---|
| Classify | Separate drinking water, non-potable water, waste and paper tasks | Assuming every jerry-can shape can hold fuel |
| Inspect | Check capacity, seams, closures, prior use, dimensions and included parts | Using a stained, unknown or incomplete carrier |
| Prepare | Clean and label dedicated water equipment or configure the printer | Sharing hoses or copying a nearby paper size |
| Use | Keep carriers supported and oriented correctly; feed paper squarely | Moving a full vessel with an open vent or tap |
| Finish | Empty appropriately, clean, dry, store separately and record contents | Returning waste fittings to fresh-water storage |
Label every carrier with its sole contents and owner, and record any replaced cap, tap or seal. For paper, retain the box label and printer setting. Those simple records replace the missing brand identity with useful, item-specific control.
Reading real Unbranded references
The Unbranded names below are examples from the current range and show why the complete description matters. They are not universal Unbranded recommendations and should not be treated as a fitment list. Within Unbranded, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.
| Example listing | What to verify beyond the name |
|---|---|
| Jerry Can (Screw Cap) - Translucent - 5 Litre | 5-litre capacity, screw-cap seal, upright transport and dedicated water use |
| Jerry Can (Screw Cap) - Translucent - 9.5 Litre | 9.5-litre capacity, full carrying mass, cap thread and storage position |
| Jerry Can (Screw Cap) - Translucent - 25 Litre | 25-litre filled weight, safe handling, restraint and upright warning |
| Jerry Can (Screw Cap & Tap) - Translucent - 25 Litre | 25-litre tap support, transit closure, venting and leak test |
| Waste Water Carrier - Black - 23 Litre | 23-litre waste-only role, separate cap, outlet height and disposal route |
| Jerry Can (Tap) - Translucent - 9.5 Litre | 9.5-litre tap operation, stable support and transport closure |
| Jerry Can Vent Cap - Blue | Blue vent-cap thread, twist lock, open or closed position and cleaning |
| Plain Listing Paper - 280 x 241mm - 2000 Sheets | 280mm by 241mm page, 2,000 sheets, sprocket feed and printer setup |
The exact capacity and fitting words are essential. A screw-cap carrier, tap carrier and vent cap cannot be substituted without checking threads and transport closure, while the black waste carrier's side-use position must never be inferred for the translucent water vessels.
Common errors around Unbranded products
- Putting petrol, diesel, oil or solvent into an unapproved water carrier.
- Using one container or hose for both drinking and waste water.
- Transporting a filled translucent can on its side despite the warning.
- Lifting a 25-litre carrier without planning its filled weight.
- Moving a container while its tap or vent remains open.
- Assuming a blue vent cap fits every thread.
- Emptying waste water into an unauthorised drain or onto a pitch.
- Ordering listing paper without printer-size and sprocket checks.
Unbranded questions and answers
Q: Is Unbranded a manufacturer?
A: Not on the evidence here. It is a mixed range label, so each product needs its own specification and instructions.
Q: Can these jerry cans carry petrol?
A: No such approval is evidenced. Petrol needs a purpose-approved, marked container that meets the applicable capacity and safety rules.
Q: Can one carrier alternate between drinking and waste water?
A: No. Keep drinking-water equipment permanently dedicated and physically separate from waste fittings.
Q: May the translucent cans travel on their side?
A: Current product evidence says they are not designed for side storage or transport once filled.
Q: Does a tap replace the screw transit cap?
A: Only if the exact instructions say so; otherwise use the stated closure and protect the tap during movement.
Q: What is the blue cap for?
A: It is a twist-lock vent intended to smooth water flow, subject to exact thread and container compatibility.
Q: How heavy is a filled 25-litre carrier?
A: Water alone is roughly 25kg, before the vessel; plan filling, support and movement around that load.
Q: What is the black carrier intended for?
A: The title and range evidence identify it as a 23-litre waste-water carrier for a supported caravan outlet.
Q: Can chemical toilet waste go in the black carrier?
A: Only if the exact product information and site rules explicitly support that waste stream; do not assume it.
Q: Where should waste water be emptied?
A: At the campsite or facility's designated disposal point, following its rules and local requirements.
Q: What printer uses the listing paper?
A: A compatible continuous tractor-feed printer configured for 280mm by 241mm sheets and the actual sprocket layout.
Q: What details should be retained?
A: Capacity, dedicated contents, cap or tap reference and prior use for carriers; box label and printer settings for paper.