MAZDA CX-3 (DK) Ball Joints

MAZDA CX-3 (DK) Ball Joints are limited to explicit product-level fitment evidence in the current AutoMotoPart catalogue. This page represents 1 matching ball joints for the exact CX-3 (DK) body series.

Choose the exact body series, engine, power output and production period before ordering. Confirm the complete reference, dimensions, position and technical notes because a shared make or model name is not final proof of compatibility.

Your Current Vehicle

Or

Select Your Vehicle

MAZDA CX-3 (DK) Ball Joints – Engine Variants

Choose the exact engine, power output and production period before viewing compatible parts.

1.5 SKYACTIV-D AWD (DK4WS, DK5AW) — 105 hp

1.5L • manufactured 02/2015–01/2018

1.5 SKYACTIV-D (DK2WS, DK5FW) — 105 hp

1.5L • manufactured 02/2015–01/2018

1.8 SKYACTIV-D AWD (DK2WS) — 116 hp

1.8L • manufactured from 02/2018

1.8 SKYACTIV-D (DK4WS) — 116 hp

1.8L • manufactured from 02/2018

2.0 SKYACTIV-G — 121 hp

2.0L • manufactured from 02/2018

2.0 SKYACTIV-G AWD (DK4W7, DKEAW) — 150 hp

2.0L • manufactured from 05/2015

2.0 SKYACTIV-G (DK2W7, DKEFW) — 150 hp

2.0L • manufactured from 05/2018

2.0 SKYACTIV-G (DK5W, DK6W) — 120 hp

2.0L • manufactured from 05/2015

Related Part Categories for MAZDA CX-3 (DK) Ball Joints

Every link retains this exact body-generation level and appears only where matching catalogue products exist.

Brake Pads

Brake Discs

Air Filter

Oil Filters

Shock Absorber

Cabin Filter

Wheel Bearing Kit

Flywheel

Fuel filter

Indicator Bulbs

Starter Motors

V-ribbed Belt

Blower Motor

Brake Pad Fitting Kit

Ignition coil

Blue Print ADA106602 Oil Pressure Switch - 1

Oil Pressure Sensor

Suspension Bushes

Blue Print ADA102132 Hydraulic Filter Kit, automatic transmission - 1

Transmission Filter

AC Compressor

Boost Pressure Sensor

Clutch Kit

Clutch Slave Cylinder

Coil Springs

Crankshaft Sensor

Drive Belt Tensioner

Exhaust Pressure Sensor

Glow Plugs

Knock Sensor

7in. Colour Monitor With Wireless Camera

Parking Sensors

Radiator

Radiator Fan

Apec AKM1001 Suspension Strut Support Mount - 1

Top Strut Mounts

V-ribbed Belt Set

Water Pump

MAZDA CX-3 (DK) Ball Joints

This fitment-backed page contains 1 matching products for MAZDA CX-3 (DK), manufactured from 01/2015. The hierarchy is generated from stored manufacturer, model-series and engine linkage data rather than from generic vehicle labels.

Compatibility checks

Confirm the exact engine, power output, production month, complete supplier reference, dimensions and installation notes. Inspect joints, bushes, gaiters, fasteners, mountings and adjacent tyres before fitting.

Repair and safety guidance

Follow suitable vehicle and component-manufacturer instructions. Diagnose the original fault and complete any required tightening, fluid, bleeding, alignment, coding or calibration procedure before returning the vehicle to service.

MAZDA CX-3 (DK) Ball Joints

MAZDA CX-3 (DK) Ball Joints – Engine Variants

Related Part Categories for MAZDA CX-3 (DK) Ball Joints

MAZDA CX-3 (DK) Ball Joints

Compatibility checks

Repair and safety guidance

Car Parts Catalogue

JOIN THE VIP CLUB!