NISSAN CABSTAR E (TL_, VL_) Coolant Temperature Sensors

NISSAN CABSTAR E (TL_, VL_) Coolant Temperature Sensors are limited to explicit product-level fitment evidence in the current AutoMotoPart catalogue. This page represents 1 matching coolant temperature sensors for the exact CABSTAR E (TL_, VL_) body series.

Choose the exact body series, engine, power output and production period before ordering. Confirm the complete reference, dimensions, position and technical notes because a shared make or model name is not final proof of compatibility.

Your Current Vehicle

Or

Select Your Vehicle

NISSAN CABSTAR E (TL_, VL_) Coolant Temperature Sensors – Engine Variants

Choose the exact engine, power output and production period before viewing compatible parts.

105.35, 110.35, 110.45 (TL0) — 106 hp

3.0L • manufactured 10/1998–10/2006

120.35, 120.45 (TL0) — 120 hp

3.0L • manufactured 10/1998–10/2006

90.32, 90.28, 95.32, 95.28 (TL0) — 90 hp

2.7L • manufactured 10/1998–10/2006

Related Part Categories for NISSAN CABSTAR E (TL_, VL_) Coolant Temperature Sensors

Every link retains this exact body-generation level and appears only where matching catalogue products exist.

Brake Pads

Brake Discs

Fuel filter

Thermostat

Brake Caliper

Brake Shoes

Tie Rod End

Brake Pad Fitting Kit

Oil Filters

Starter Motors

Air Filter

Apec AST8004 Mounting, stabiliser bar - 1

Anti-roll bar bushes

Auxiliary belt

Ball Joints

Glow Plugs

Handbrake Cable

Radiator Cap

Water Pump

Brake Drum

Brake Hose

Brake Shoe Fitting Kit

Clutch Kit

V-ribbed Belt

AC Compressor

Clutch Slave Cylinder

Crankshaft Sensor

Exhaust Pipe

Blue Print ADG096517 Deflection/Guide Pulley, V-ribbed belt - 1

Idler Pulley & Serpentine Belt

Blue Print ADA106602 Oil Pressure Switch - 1

Oil Pressure Sensor

Timing Belt Kit

Wheel Cylinder

Wing Mirror Glass

NISSAN CABSTAR E (TL_, VL_) Coolant Temperature Sensors

This fitment-backed page contains 1 matching products for NISSAN CABSTAR E (TL_, VL_), manufactured 07/1992–11/2006. The hierarchy is generated from stored manufacturer, model-series and engine linkage data rather than from generic vehicle labels.

Compatibility checks

Confirm the exact engine, power output, production month, complete supplier reference, dimensions and installation notes. Inspect hoses, seals, clamps, housings, fluid condition and evidence of leakage before fitting.

Repair and safety guidance

Follow suitable vehicle and component-manufacturer instructions. Diagnose the original fault and complete any required tightening, fluid, bleeding, alignment, coding or calibration procedure before returning the vehicle to service.