RENAULT GRAND KANGOO III MPV Injectors

RENAULT GRAND KANGOO III MPV Injectors are limited to explicit product-level fitment evidence in the current AutoMotoPart catalogue. This page represents 1 matching injectors for the exact GRAND KANGOO III MPV body series.

Choose the exact body series, engine, power output and production period before ordering. Confirm the complete reference, dimensions, position and technical notes because a shared make or model name is not final proof of compatibility.

Your Current Vehicle

Or

Select Your Vehicle

RENAULT GRAND KANGOO III MPV Injectors – Engine Variants

Choose the exact engine, power output and production period before viewing compatible parts.

Blue dCi 115 (KJAC) — 115 hp

1.5L • manufactured from 09/2025

Blue dCi 95 (KJAB) — 95 hp

1.5L • manufactured from 01/2024

Related Part Categories for RENAULT GRAND KANGOO III MPV Injectors

Every link retains this exact body-generation level and appears only where matching catalogue products exist.

Cabin Filter

Air Filter

Brake Discs

Brake Pads

Oil Filters

Blue Print ADC46111 Belt Pulley, crankshaft - 1

Crankshaft Pulley

Fuel filter

Blue Print ADG096517 Deflection/Guide Pulley, V-ribbed belt - 1

Idler Pulley & Serpentine Belt

Anti-roll bar links

Boost Pressure Sensor

Camshaft sensor

Charge Air Hose

Drive Belt Tensioner

EGR Valve

Glow Plugs

High Pressure Fuel Pump

Radiator Cap

Radiator Hose

Shock Absorber

Starter Motors

Thermostat

Timing Belt Kit

Timing Belt & Water Pump

Timing Chain Kit

Tie Rod End

V-ribbed Belt

Water Pump

RENAULT GRAND KANGOO III MPV Injectors

This fitment-backed page contains 1 matching products for RENAULT GRAND KANGOO III MPV, manufactured from 01/2024. The hierarchy is generated from stored manufacturer, model-series and engine linkage data rather than from generic vehicle labels.

Compatibility checks

Confirm the exact engine, power output, production month, complete supplier reference, dimensions and installation notes. Inspect mountings, seals, fasteners, connected components and the cause of the original fault before fitting.

Repair and safety guidance

Follow suitable vehicle and component-manufacturer instructions. Diagnose the original fault and complete any required tightening, fluid, bleeding, alignment, coding or calibration procedure before returning the vehicle to service.