MITSUBISHI LANCER Mk IV (C6_A, C7_A) Lambda Sensors

MITSUBISHI LANCER Mk IV (C6_A, C7_A) Lambda Sensors are limited to explicit product-level fitment evidence in the current AutoMotoPart catalogue. This page represents 1 matching lambda sensors for the exact LANCER Mk IV (C6_A, C7_A) body series.

Choose the exact body series, engine, power output and production period before ordering. Confirm the complete reference, dimensions, position and technical notes because a shared make or model name is not final proof of compatibility.

Your Current Vehicle

Or

Select Your Vehicle

MITSUBISHI LANCER Mk IV (C6_A, C7_A) Lambda Sensors – Engine Variants

Choose the exact engine, power output and production period before viewing compatible parts.

1.3 12V (C61A) — 75 hp

1.3L • manufactured 07/1990–06/1992

1.3 (C61A)

2 power and production variants

1.5 12V (C62A) — 90 hp

1.5L • manufactured 06/1990–05/1992

1.5 (C62A)

2 power and production variants

1.5 GLS (C62A) — 86 hp

1.5L • manufactured 08/1989–08/1992

Related Part Categories for MITSUBISHI LANCER Mk IV (C6_A, C7_A) Lambda Sensors

Every link retains this exact body-generation level and appears only where matching catalogue products exist.

Oil Filters

Brake Pads

Thermostat

Anti-roll bar links

Coolant Temperature Sensor

Brake Discs

Brake Hose

CV Boot

Fuel filter

Air Filter

Auxiliary belt

Ball Joints

Brake Pad Fitting Kit

Glow Plugs

Blue Print ADA106602 Oil Pressure Switch - 1

Oil Pressure Sensor

Starter Motors

Steering Rack Boots

V-ribbed Belt

Water Pump

Wheel Bearing Kit

Brake Light Bulb

Brake Shoe Fitting Kit

Brake Shoes

Clutch Release Bearing

Clutch Slave Cylinder

Distributor cap

Drive Belt Tensioner

Indicator Bulbs

Radiator Cap

Suspension Bushes

Timing Belt Kit

Tie Rod End

Wheel Cylinder

MITSUBISHI LANCER Mk IV (C6_A, C7_A) Lambda Sensors

This fitment-backed page contains 1 matching products for MITSUBISHI LANCER Mk IV (C6_A, C7_A), manufactured 04/1988–12/1997. The hierarchy is generated from stored manufacturer, model-series and engine linkage data rather than from generic vehicle labels.

Compatibility checks

Confirm the exact engine, power output, production month, complete supplier reference, dimensions and installation notes. Inspect connectors, wiring, power supply, earths, mounting and stored fault information before fitting.

Repair and safety guidance

Follow suitable vehicle and component-manufacturer instructions. Diagnose the original fault and complete any required tightening, fluid, bleeding, alignment, coding or calibration procedure before returning the vehicle to service.