NISSAN INTERSTAR Platform/Chassis (X62B) Radiator Fans

NISSAN INTERSTAR Platform/Chassis (X62B) Radiator Fans are limited to explicit product-level fitment evidence in the current AutoMotoPart catalogue. This page represents 1 matching radiator fans for the exact INTERSTAR Platform/Chassis (X62B) body series.

Choose the exact body series, engine, power output and production period before ordering. Confirm the complete reference, dimensions, position and technical notes because a shared make or model name is not final proof of compatibility.

Your Current Vehicle

Or

Select Your Vehicle

NISSAN INTERSTAR Platform/Chassis (X62B) Radiator Fans – Engine Variants

Choose the exact engine, power output and production period before viewing compatible parts.

dCi 130 RWD — 130 hp

2.3L • manufactured 11/2021–12/2024

dCi 145 RWD — 145 hp

2.3L • manufactured 11/2021–12/2024

dCi 165 RWD — 163 hp

2.3L • manufactured 11/2021–12/2024

Related Part Categories for NISSAN INTERSTAR Platform/Chassis (X62B) Radiator Fans

Every link retains this exact body-generation level and appears only where matching catalogue products exist.

Brake Pads

Brake Discs

Air Filter

Wheel Bearing Kit

Anti-roll bar links

Clutch Kit

Fuel filter

Ball Joints

Brake Pad Fitting Kit

Blue Print ADC46111 Belt Pulley, crankshaft - 1

Crankshaft Pulley

Blue Print ADBP800010 Mounting, engine - 1

Engine Mount

NOX Sensor

Power Steering Pump

Radiator

ABS Sensor

AC Compressor

Boost Pressure Sensor

Clutch Release Bearing

Exhaust Pressure Sensor

Flywheel

Glow Plugs

Oil Cooler

Oil Filters

Thermostat

Timing Chain Kit

Tie Rod End

V-ribbed Belt

Water Pump

NISSAN INTERSTAR Platform/Chassis (X62B) Radiator Fans

This fitment-backed page contains 1 matching products for NISSAN INTERSTAR Platform/Chassis (X62B), manufactured 11/2021–12/2024. The hierarchy is generated from stored manufacturer, model-series and engine linkage data rather than from generic vehicle labels.

Compatibility checks

Confirm the exact engine, power output, production month, complete supplier reference, dimensions and installation notes. Inspect hoses, seals, clamps, housings, fluid condition and evidence of leakage before fitting.

Repair and safety guidance

Follow suitable vehicle and component-manufacturer instructions. Diagnose the original fault and complete any required tightening, fluid, bleeding, alignment, coding or calibration procedure before returning the vehicle to service.