MERCEDES-BENZ CLS (C219) Top Strut Mounts

This page is limited to explicit product-level fitment evidence in the current AutoMotoPart catalogue. It represents 1 matching product for the exact CLS (C219) body series.

Choose the exact body series, engine, power output and production period before ordering. Confirm the complete reference, dimensions, position and technical notes because a shared make or model name is not final proof of compatibility.

MERCEDES-BENZ CLS (C219) Top Strut Mounts

Your Current Vehicle

Select Your Vehicle

Popular Models and Vehicle Options for MERCEDES-BENZ CLS (C219) Top Strut Mounts

Choose the exact engine, power output and production period before viewing compatible parts.

CLS 280 (219.354) — 231 hp

3.0L • manufactured 07/2008–12/2010

CLS 300 (219.354) — 231 hp

3.0L • manufactured 04/2009–12/2010

CLS 320 CDI (219.322) — 224 hp

3.0L • manufactured 01/2005–12/2010

CLS 350 (219.356) — 272 hp

3.5L • manufactured 10/2004–12/2010

CLS 350 (219.357) — 292 hp

3.5L • manufactured 04/2006–12/2010

CLS 350 CDI — 272 hp

3.0L • manufactured 04/2009–12/2010

CLS 350 CDI (219.322) — 224 hp

3.0L • manufactured 04/2009–12/2010

CLS 500 (219.372) — 388 hp

5.5L • manufactured 04/2006–12/2010

CLS 500 (219.375) — 306 hp

5.0L • manufactured 10/2004–12/2010

CLS 55 AMG (219.376) — 476 hp

5.4L • manufactured 01/2005–12/2010

CLS 63 AMG (219.377)

2 power and production variants

Related Part Categories for MERCEDES-BENZ CLS (C219) Top Strut Mounts

Every link retains this exact body-generation level and appears only where matching catalogue products exist.

Brake Pads

Suspension Arms

Brake Discs

Water Pump

Air Filter

Brake Pad Wear Sensor

Brake Caliper

Thermostat

Fuel filter

Lambda Sensor

Oil Filters

Coil Springs

Power Steering Pump

Starter Motors

AC Compressor

Brake Pad Fitting Kit

Crankcase Breather Hose

Blue Print ADG096517 Deflection/Guide Pulley, V-ribbed belt - 1

Idler Pulley & Serpentine Belt

Radiator Hose

Timing Chain Kit

Tie Rod End

V-ribbed Belt

Air Suspension

Anti-roll bar links

Ball Joints

Brake Hose

Cabin Filter

Blue Print ADC46111 Belt Pulley, crankshaft - 1

Crankshaft Pulley

Ignition coil

Wheel Bearing Kit

Brake Disc Back Plate

Camshaft sensor

Drive Belt Tensioner

Exhaust Gas Temperature Sensor

Glow Plugs

ABS Sensor

Blue Print ADG01616 Ignition Cable Kit - 1

Ignition Lead Set

Ignition leads

V-ribbed Belt Set

Boost Pressure Sensor

Brake Light Switch

Charge Air Hose

Coolant Temperature Sensor

Crankshaft Sensor

Blue Print ADBP800010 Mounting, engine - 1

Engine Mount

Handbrake Cable

Heater Core Hose

Blue Print ADJ136801 fuel supply unit - 1

In-tank Fuel Pump

NOX Sensor

Oil Cooler

MERCEDES-BENZ CLS (C219) Top Strut Mounts

This fitment-backed page contains 1 matching product for MERCEDES-BENZ CLS (C219), manufactured 10/2004–12/2012. The hierarchy is generated from stored manufacturer, model-series and engine linkage data rather than from generic vehicle labels.

Compatibility checks

Confirm the exact engine, power output, production month, complete supplier reference, dimensions and installation notes. Inspect mountings, seals, fasteners, connected components and the cause of the original fault before fitting.

Repair and safety guidance

Follow suitable vehicle and component-manufacturer instructions. Diagnose the original fault and complete any required tightening, fluid, bleeding, alignment, coding or calibration procedure before returning the vehicle to service.

MERCEDES-BENZ CLS (C219) Top Strut Mounts

Popular Models and Vehicle Options for MERCEDES-BENZ CLS (C219) Top Strut Mounts

Related Part Categories for MERCEDES-BENZ CLS (C219) Top Strut Mounts

MERCEDES-BENZ CLS (C219) Top Strut Mounts

Compatibility checks

Repair and safety guidance

Car Parts Categories

JOIN OUR MAILING LIST