CITROËN C5 II Break (RE_) Brake Pad Fitting Kits

CITROËN C5 II Break (RE_) Brake Pad Fitting Kits are limited to explicit product-level fitment evidence in the current AutoMotoPart catalogue. This page represents 1 matching brake pad fitting kits for the exact C5 II Break (RE_) body series.

Choose the exact body series, engine, power output and production period before ordering. Confirm the complete reference, dimensions, position and technical notes because a shared make or model name is not final proof of compatibility.

Your Current Vehicle

Select Your Vehicle

CITROËN C5 II Break (RE_) Brake Pad Fitting Kits – Engine Variants

Choose the exact engine, power output and production period before viewing compatible parts.

1.6 HDi (RE9HZC, RE9HYB) — 109 hp

1.6L • manufactured 09/2004–01/2008

1.8 16V (RE6FYB) — 125 hp

1.7L • manufactured 09/2005–01/2008

1.8 16V (RE6FZB) — 116 hp

1.7L • manufactured 09/2004–08/2005

2.0 16V (RERFJB, RERFJC) — 140 hp

2.0L • manufactured 09/2004–01/2008

2.0 HDi (RERHRH) — 136 hp

2.0L • manufactured 09/2004–01/2008

2.2 HDi (RE4HPE, RE4HP2, RE4HRE, RE4HR2) — 163 hp

2.2L • manufactured 05/2006–01/2008

2.2 HDi (RE4HTE, RE4HT2) — 170 hp

2.2L • manufactured 04/2006–08/2008

2.2 HDi (RE4HXE) — 133 hp

2.2L • manufactured 09/2004–09/2006

3.0 (REXFUJ) — 235 hp

2.9L • manufactured 09/2004–01/2008

3.0 V6 (REXFUF) — 207 hp

2.9L • manufactured 09/2004–01/2008

3.0 V6 (REXFUJ) — 211 hp

2.9L • manufactured 10/2004–04/2007

Related Part Categories for CITROËN C5 II Break (RE_) Brake Pad Fitting Kits

Every link retains this exact body-generation level and appears only where matching catalogue products exist.

Thermostat

Clutch Kit

Fuel filter

Brake Caliper

Air Filter

Starter Motors

Brake Discs

Brake Pads

Charge Air Hose

Blue Print ADC46111 Belt Pulley, crankshaft - 1

Crankshaft Pulley

Lambda Sensor

Anti-roll bar links

Crankshaft Sensor

Glow Plugs

Ignition coil

Injectors

Suspension Bushes

Drive Belt Tensioner

EGR Valve

Blue Print ADBP800010 Mounting, engine - 1

Engine Mount

Febi 173354 Water Pump & Timing Belt Kit - 1

Timing Belt & Water Pump

Tie Rod End

Water Pump

ABS Sensor

Cabin Filter

Flywheel

Fuel Overflow Pipe

Gearbox Mount

Oil Filters

Timing Belt Kit

Wheel Bearing Kit

Boost Pressure Sensor

CV Boot

Driveshaft

Heater Core Hose

Radiator

Blue Print ADN17239 Pressure Converter - 1

Solenoid Valve

Suspension Arms

V-ribbed Belt Set

Brake Light Switch

Camshaft sensor

Fuel Pressure Regulator

Blue Print ADJ136801 fuel supply unit - 1

In-tank Fuel Pump

Oil Cooler

V-ribbed Belt

Brake Hose

Clutch Slave Cylinder

Coolant Flange

CV Joint

Dipstick

CITROËN C5 II Break (RE_) Brake Pad Fitting Kits

This fitment-backed page contains 1 matching products for CITROËN C5 II Break (RE_), manufactured 09/2004–08/2008. The hierarchy is generated from stored manufacturer, model-series and engine linkage data rather than from generic vehicle labels.

Compatibility checks

Confirm the exact engine, power output, production month, complete supplier reference, dimensions and installation notes. Inspect friction surfaces, hydraulic connections, sensors, mountings and related hardware before fitting.

Repair and safety guidance

Follow suitable vehicle and component-manufacturer instructions. Diagnose the original fault and complete any required tightening, fluid, bleeding, alignment, coding or calibration procedure before returning the vehicle to service.

CITROËN C5 II Break (RE_) Brake Pad Fitting Kits

CITROËN C5 II Break (RE_) Brake Pad Fitting Kits – Engine Variants

Related Part Categories for CITROËN C5 II Break (RE_) Brake Pad Fitting Kits

CITROËN C5 II Break (RE_) Brake Pad Fitting Kits

Compatibility checks

Repair and safety guidance

Car Parts Catalogue

JOIN THE VIP CLUB!