KIA SPORTAGE II VAN (KM_) Handbrake Cables

KIA SPORTAGE II VAN (KM_) Handbrake Cables are limited to explicit product-level fitment evidence in the current AutoMotoPart catalogue. This page represents 1 matching handbrake cables for the exact SPORTAGE II VAN (KM_) body series.

Choose the exact body series, engine, power output and production period before ordering. Confirm the complete reference, dimensions, position and technical notes because a shared make or model name is not final proof of compatibility.

Your Current Vehicle

Or

Select Your Vehicle

KIA SPORTAGE II VAN (KM_) Handbrake Cables – Engine Variants

Choose the exact engine, power output and production period before viewing compatible parts.

2.0 CRDi 4WD — 150 hp

2.0L • manufactured 09/2008–05/2010

Related Part Categories for KIA SPORTAGE II VAN (KM_) Handbrake Cables

Every link retains this exact body-generation level and appears only where matching catalogue products exist.

Brake Pads

Brake Discs

Shock Absorber

Cabin Filter

Suspension Bushes

Brake Pad Fitting Kit

Oil Filters

Tie Rod End

Ball Joints

Fuel filter

Suspension Arms

Air Filter

AC Compressor

Anti-roll bar links

EGR Valve

Glow Plugs

Cambiare VE701597 Switch, reverse light - 1

Reverse Switch

Thermostat

Timing Belt Kit

ABS Sensor

Apec AST8004 Mounting, stabiliser bar - 1

Anti-roll bar bushes

Camshaft sensor

Coolant Temperature Sensor

Drive Belt Tensioner

Heater resistor

Blue Print ADG096517 Deflection/Guide Pulley, V-ribbed belt - 1

Idler Pulley & Serpentine Belt

Injectors

Intercooler

Oil Cooler

Blue Print ADA106602 Oil Pressure Switch - 1

Oil Pressure Sensor

Radiator Cap

Starter Motors

Febi 173354 Water Pump & Timing Belt Kit - 1

Timing Belt & Water Pump

V-ribbed Belt

KIA SPORTAGE II VAN (KM_) Handbrake Cables

This fitment-backed page contains 1 matching products for KIA SPORTAGE II VAN (KM_), manufactured from 09/2004. The hierarchy is generated from stored manufacturer, model-series and engine linkage data rather than from generic vehicle labels.

Compatibility checks

Confirm the exact engine, power output, production month, complete supplier reference, dimensions and installation notes. Inspect friction surfaces, hydraulic connections, sensors, mountings and related hardware before fitting.

Repair and safety guidance

Follow suitable vehicle and component-manufacturer instructions. Diagnose the original fault and complete any required tightening, fluid, bleeding, alignment, coding or calibration procedure before returning the vehicle to service.