RENAULT FLUENCE (L3_) Number Plates

RENAULT FLUENCE (L3_) Number Plates are limited to explicit product-level fitment evidence in the current AutoMotoPart catalogue. This page represents 1 matching number plates for the exact FLUENCE (L3_) body series.

Choose the exact body series, engine, power output and production period before ordering. Confirm the complete reference, dimensions, position and technical notes because a shared make or model name is not final proof of compatibility.

Your Current Vehicle

Select Your Vehicle

RENAULT FLUENCE (L3_) Number Plates – Engine Variants

Choose the exact engine, power output and production period before viewing compatible parts.

1.5 dCi — 95 hp

1.5L • manufactured from 07/2014

1.5 dCi (L30A) — 86 hp

1.5L • manufactured from 02/2010

1.5 dCi (L30B) — 106 hp

1.5L • manufactured from 02/2010

1.5 dCi (L30D, L30L, L306, L33F, L33L, L33M, L33V, L33W) — 110 hp

1.5L • manufactured from 02/2010

1.5 dCi (L30S) — 90 hp

1.5L • manufactured from 02/2010

1.6 16V — 106 hp

1.6L • manufactured from 02/2010

1.6 16V (L301, L30F, L30P, L30R) — 110 hp

1.6L • manufactured from 02/2010

1.6 16V (L301, L30P, L30R) — 111 hp

1.6L • manufactured from 02/2010

1.6 dCi — 130 hp

1.6L • manufactured from 01/2013

2.0 16V (L30C, L30G, L30T, L30V) — 140 hp

2.0L • manufactured from 02/2010

Related Part Categories for RENAULT FLUENCE (L3_) Number Plates

Every link retains this exact body-generation level and appears only where matching catalogue products exist.

Clutch Kit

Brake Pads

Thermostat

Brake Discs

Cabin Filter

Water Pump

Driveshaft

Fuel filter

Timing Chain Kit

Lambda Sensor

Oil Filters

Air Filter

Charge Air Hose

CV Boot

EGR Valve

Starter Motors

Suspension Arms

Tie Rod End

Crankshaft Sensor

Exhaust Gas Temperature Sensor

Flywheel

Clutch Slave Cylinder

Drive Belt Tensioner

Blue Print ADBP800010 Mounting, engine - 1

Engine Mount

Ignition coil

Injectors

Radiator Hose

Suspension Bushes

Febi 173354 Water Pump & Timing Belt Kit - 1

Timing Belt & Water Pump

AC Compressor

Ball Joints

Brake Pad Fitting Kit

Gearbox Mount

Blue Print ADJ136801 fuel supply unit - 1

In-tank Fuel Pump

Radiator

Cambiare VE701597 Switch, reverse light - 1

Reverse Switch

Blue Print ADN17239 Pressure Converter - 1

Solenoid Valve

Timing Belt Kit

ABS Sensor

Apec AST8004 Mounting, stabiliser bar - 1

Anti-roll bar bushes

Anti-roll bar links

Boost Pressure Sensor

Brake Caliper

Brake Light Switch

Car regulators, Relays & Solenoids

Coolant Temperature Sensor

Blue Print ADC46111 Belt Pulley, crankshaft - 1

Crankshaft Pulley

CV Joint

Exhaust Pressure Sensor

Flywheel Bolt

RENAULT FLUENCE (L3_) Number Plates

This fitment-backed page contains 1 matching products for RENAULT FLUENCE (L3_), manufactured from 02/2010. The hierarchy is generated from stored manufacturer, model-series and engine linkage data rather than from generic vehicle labels.

Compatibility checks

Confirm the exact engine, power output, production month, complete supplier reference, dimensions and installation notes. Inspect mountings, seals, fasteners, connected components and the cause of the original fault before fitting.

Repair and safety guidance

Follow suitable vehicle and component-manufacturer instructions. Diagnose the original fault and complete any required tightening, fluid, bleeding, alignment, coding or calibration procedure before returning the vehicle to service.

RENAULT FLUENCE (L3_) Number Plates

RENAULT FLUENCE (L3_) Number Plates – Engine Variants

Related Part Categories for RENAULT FLUENCE (L3_) Number Plates

RENAULT FLUENCE (L3_) Number Plates

Compatibility checks

Repair and safety guidance

Car Parts Catalogue

JOIN THE VIP CLUB!