76 Products
STATUS
Status is a UK electrical-accessories and lighting brand. The selection here spans workshop and site needs rather than vehicle-specific parts: bulbs and floodlights sit alongside extension leads, cable reels, plugs, adaptors, fans, heaters, kettles, vacuum cleaners and charging cables. The lighting entries include candle, golf-ball, reflector, GU10, G9 and tube forms, while the cooling group ranges from small USB desk fans to larger oscillating floor and stand fans.
Choose by the exact electrical and physical specification, not by a familiar shape, wattage shorthand or the number of sockets alone. The current AutoMotoPart selection contains 81 Status items, led by 63 site safety entries, 10 office supplies entries, 2 caravan & camping entries, 1 4.5w 40w dim led candle ses ww 1 pb entry. These Status figures describe the range on this page rather than every product the brand may make elsewhere.
For a lamp, confirm cap type, supply, shape, dimensions, lumen output, colour description, dimming requirement and whether an enclosed or sensor-controlled fitting is involved. For an extension product, record socket count, cable length, current or power limit, plug and any reel or outdoor-use instructions. Fans and heaters need the stated supply, power, stability, clearances and intended environment. USB leads must match both connector ends and the device's charging or data requirement; visual similarity does not prove capability.
Inspect every product, cable and plug before use. Do not overload or daisy-chain extension leads, and fully unwind a reel when the product instructions require it for the intended load. Keep indoor equipment away from rain, spray and conductive dust unless its rating explicitly permits that environment. Lamps, heaters and floodlights can become hot, so isolate the supply, allow cooling and follow fitting clearances. Damaged flexes, loose sockets, scorch marks, cracked housings or repeated tripping call for withdrawal and competent assessment rather than tape or improvised repairs. The products below provide a neutral overview of the current Status selection; final choice comes from the label, instructions and conditions of use.
Your Current Vehicle
Or
Select Your Vehicle
Popular Part Types
Only part types stocked for this brand are shown.
Car Parts Categories
Browse the main catalogue areas in which this brand has matching products.
Other popular manufacturers of aftermarket automotive parts
Explore established alternatives with related products in the current catalogue.
Status: understand the range before choosing
Status International (UK) presents the Status brand across lighting, electrical accessories, heating, cooling and small domestic appliances. Its official range descriptions include bulbs, plugs, adaptors, extension sockets, cable reels, fans, heaters and kettles. That broad electrical identity matches this page, but each article still has its own cap, voltage, rating, environment and use instructions.
AutoMotoPart currently lists 81 Status items. The largest Status groups are 63 site safety entries, 10 office supplies entries, 2 caravan & camping entries, 1 4.5w 40w dim led candle ses ww 1 pb entry. Status totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact Status listing, its current technical information and the item in front of you must agree.
What the Status page actually covers
| Product group in this range | Current entries | Selection focus |
|---|---|---|
| Site Safety | 63 | Confirm supply, environment, cable or fitting condition, stability and every rating printed for the exact site product. |
| Office Supplies | 10 | Match paper or desk-use requirements to the precise article; do not infer electrical suitability from a broad office category. |
| Caravan & Camping | 2 | Check supply, pitch or location constraints and product instructions for caravan or temporary-use equipment. |
| 4.5W 40W DIM LED CANDLE SES WW 1 PB | 1 | Verify SES cap, lamp shape, dimmer compatibility, wattage and colour description for this exact candle lamp. |
| 4W STT LED G9 CW CLEAR 1PK TB PLA | 1 | Confirm G9 cap, supply, dimensions, output and the fitting's permitted lamp type and enclosure conditions. |
| 8.5W | 1 | Read the complete wattage, cap, lumen and colour data rather than relying on abbreviated title text. |
| Accessories & Styling | 1 | Check connector type at both ends, device support and whether charging, data or both are required. |
| STATUS 3W LED CC LAMP GLS BC 1PK | 1 | Use full specifications for any accessory whose product-type wording does not explain its electrical interface. |
Most entries are grouped around site safety and electrical workshop use, with ten office-supply items and smaller caravan, lighting and accessory groups. The titles reveal a practical mix of socket extensions, cable reels, lamps, floodlights, fans and heaters. Because the category is broad, the Status name is not the compatibility rule: a four-socket lead, an SES candle and a 16-inch fan require entirely different checks.
Build a reliable shortlist
First define the task and environment: providing temporary socket capacity, replacing a lamp, moving air, providing heat, boiling water, cleaning or connecting a device. Then copy the full label details from the existing item or equipment. Electrical ratings are limits, not targets, and an accessory must remain suitable for the circuit, connected loads and physical conditions throughout use.
| Check | Why it matters | Useful evidence |
|---|---|---|
| Supply and rating | Voltage, current, power and frequency must match the equipment and circuit | Rating plate, instructions and connected-load total |
| Location | Indoor, outdoor, damp, dusty and high-traffic areas present different risks | Product environment marking and site assessment |
| Connector or cap | SES, ES, BC, SBC, GU10, G9, USB and mains sockets do not substitute for one another | Exact marking and an undamaged matching interface |
| Light output | Wattage does not state brightness or colour appearance on its own | Lumens, colour description, beam or shape and dimming status |
| Cable arrangement | Length, reel condition and routing affect loading, trip and heat risks | Cable rating, unwind instructions and protected route |
| Operating space | Fans and heaters need stable placement, intake clearance and unobstructed airflow | Product manual, dimensions and the actual work area |
If the old label is missing or the fitting is damaged, do not solve the uncertainty by trying several products under power. Identify the circuit or appliance first. A lamp that physically enters a holder can still have the wrong cap engagement, dimensions, heat behaviour or controls, while a lead with enough sockets can still be unsuitable for the combined load or location.
Lamps, cap codes and usable light
Status lighting on this page includes candle and golf-ball shapes, reflector lamps, GU10 and G9 capsules, small Edison screw products, bayonet-cap products and LED tubes supplied with batten fittings. Cap abbreviations such as SES, ES, BC and SBC identify the connection family, but cap alone does not settle dimensions, voltage, output, colour or control compatibility. Check all of those details on the lamp and fitting before installation.
Lumens describe light output more directly than the wattage consumed, while warm-white and cool-white descriptions concern appearance rather than brightness. A dimmable lamp needs a compatible control, and a sensor floodlight needs suitable placement and adjustment. Isolate the circuit before changing fixed electrical equipment, allow hot lamps to cool, and obtain competent help where wiring, earthing, water ingress or fitting damage is in question.
Extension leads, sockets and cable reels
The Status selection includes multi-socket extensions, plugs, adaptors and reels with different cable lengths. Count the actual loads and use the lowest stated limit across the lead, plug, reel and upstream circuit. Several low-power devices can still create clutter and trip hazards, while one heater or kettle may account for much of an extension's capacity. Never daisy-chain leads to gain reach or defeat a plug, fuse or protective device.
Cable reels can retain heat when wound, so follow their wound and unwound ratings and the instructions for the connected load. Route flex where wheels, doors, sharp edges, liquids and hot surfaces cannot damage it. A lead is temporary distribution equipment, not a substitute for permanent fixed sockets. If a plug, socket or cable becomes hot, smells unusual, crackles or shows discolouration, disconnect safely and remove it from use.
Fans, heaters and airflow
Status officially groups handheld, USB, desk, tower and stand fans within its cooling range, and examples here include several sizes and speed selections. Choose a stable footprint and enough space for the guard, oscillation and cable. Airflow numbers and speed labels should be compared only where product data defines them consistently. A larger diameter or extra speed does not automatically make a fan right for a cramped bench or public walkway.
Heaters demand a separate load and fire-risk assessment. Keep clearances specified by the manual, do not cover a heater or block its intake, and avoid using it through an extension unless both the appliance and extension instructions allow that arrangement and the ratings agree. Fan heaters, halogen or quartz heaters and oil-filled radiators distribute heat differently; select by the exact room and supervision requirements rather than by wattage alone.
Kettles, vacuums and USB accessories
The page includes white and stainless-steel cordless kettles, a lightweight vacuum and USB cables as well as workshop lighting. Kettle listings provide features such as capacity, power and safety cut-out information, but the appliance still needs a stable dry surface, an intact base and enough socket capacity. Keep the connector and base dry, fill within the marked limits and stop using a kettle with leakage or heat damage.
For a vacuum, match the attachments and capacity to the debris the instructions permit; ordinary dry vacuums must not be used for hot material, harmful dust or liquid unless specifically designed for it. USB-A to device cables need the correct connector and protocol, and old title wording about phone generations is not proof of support for a current device. Confirm whether the task is power, data or both before relying on the lead.
Inspection, positioning and responsible use
Before each use, look for cuts, flattened cable, exposed conductors, loose pins, damaged guards, unstable bases, cracked lamp holders and signs of overheating. Confirm that portable equipment is appropriate for the workplace inspection regime. Do not open a moulded plug, bypass a thermal cut-out or repair a mains flex with adhesive tape. Quarantine defective products so another person cannot plug them in accidentally.
Position lighting to avoid glare and shadows over the work, without placing a hot fitting against combustible material. Keep fans from drawing loose paper or swarf into the guard, and keep trailing cables out of access routes. At the end of use, switch off, disconnect safely where required, allow heat to dissipate and store flexes without tight knots. These habits support the product instructions; they do not replace them.
From identification to a checked result
| Stage | Good practice for this range | Mistake to avoid |
|---|---|---|
| Define the duty | Record whether the need is light, power distribution, airflow, heat or connection | Choosing from a broad category label |
| Read the ratings | Compare supply, load, cap or connector, dimensions and environment | Using wattage or socket count as the only check |
| Inspect | Check plug, flex, housing, guard, holder and labels before energising | Covering damage with tape and continuing use |
| Position | Provide stable support, clearance, protected cable routing and dry conditions | Running a lead through a door or across a vehicle route |
| Monitor and store | Stop on heat, smell, noise, tripping or damage and store after cooling | Resetting repeatedly without finding the fault |
Keep the Status model or reference, its rating information and instructions available for the people who use it. Where equipment is shared, label any restriction such as indoor-only use or reel-unwinding requirements clearly, and record defects rather than returning a questionable product to a cupboard.
Reading real Status references
The Status names below are examples from the current range and show why the complete description matters. They are not universal Status recommendations and should not be treated as a fitment list. Within Status, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.
| Example listing | What to verify beyond the name |
|---|---|
| Lightweight Hand Held Upright Vacuum Cleaner | Supply, capacity, cable condition and permitted surface or debris |
| USB A to 8 Pin 1M White PVC 1pk | Connector at both ends, cable function and device support |
| Status ATML14CMPVCWL10 USB A TO MULTI LEAD 14CM WHITE PVC | Speed settings, fan diameter, stability and oscillation clearance |
| Cordless Kettle - White | Cap code, lumen output, colour, dimensions and control compatibility |
| Cordless Kettle - Stainless Steel | Supply, capacity, cable condition and permitted surface or debris |
| 3 Speed Oscillating Desk Fan - 12in. | Connector at both ends, cable function and device support |
| 3 Speed Oscillating Mini Tower Fan - 14in. | Speed settings, fan diameter, stability and oscillation clearance |
| 3 Speed Floor Stand Fan - 16in. | Cap code, lumen output, colour, dimensions and control compatibility |
The sample names range from a hand-held vacuum and USB lead to fans and several lamp shapes. That breadth is the reason to search by the full Status reference or specification. A short title such as ‘G4’ or ‘SES Candle’ is an opening clue, not enough information for a safe electrical choice.
Common errors around Status products
- Choosing a Status lamp by shape while overlooking its cap and supply.
- Treating equivalent-wattage wording as a substitute for lumen output and fitting compatibility.
- Daisy-chaining extension leads or exceeding the lowest relevant rating.
- Leaving a cable reel tightly wound when its instructions require it to be unwound for the load.
- Using indoor lighting, a fan or a lead where rain or spray can reach it without a suitable rating.
- Running heater power through an unverified extension or placing the heater against stored materials.
- Using a standard dry vacuum for liquid, hot debris or hazardous dust.
- Resetting a tripped device repeatedly instead of isolating and investigating the cause.
Status questions and answers
Q: What does the Status range here include?
A: It includes lighting, extension products, cable reels, fans, heaters, kettles, a vacuum and USB accessories.
Q: Are SES and ES lamp caps the same?
A: No. SES is a smaller Edison screw format; match the exact cap marking on the fitting and lamp.
Q: Do watts tell me how bright an LED lamp is?
A: Not on their own; compare lumen output as well as colour, beam, shape and fitting requirements.
Q: Can any LED lamp be used with a dimmer?
A: No. The lamp and control must both support dimming and be compatible with each other.
Q: Can extension leads be plugged into one another?
A: Avoid daisy-chaining; use a correctly rated lead of suitable length or arrange appropriate fixed sockets.
Q: Why should a cable reel be unwound?
A: A wound cable can retain heat, so follow the reel's stated wound and unwound load instructions.
Q: May a Status desk fan be used outdoors?
A: Only if the exact model is rated and instructed for those conditions; indoor fans must stay dry.
Q: Can a portable heater share an extension with tools?
A: Do not assume so. Check the heater instructions, lead rating and total connected load, and prefer an appropriate fixed outlet where specified.
Q: What should I do with a hot plug or socket?
A: Switch off and disconnect safely, remove the item from service and arrange competent inspection.
Q: Will any USB-A lead charge every device?
A: No. Connector shape, power support, data protocol and the device's requirements all matter.
Q: Can the vacuum collect workshop liquid?
A: Only if the exact vacuum instructions explicitly allow wet collection; the title here does not establish that.
Q: What details should I retain for a Status product?
A: Keep the model or reference, supply and load ratings, lamp cap or cable type, environment limits and instructions.