4 Products
BLACK RHINO
Your Current Vehicle
Or
Select Your Vehicle
Popular Part Types
Only part types stocked for this brand are shown.
Car Parts Categories
Browse the main catalogue areas in which this brand has matching products.
Other popular manufacturers of aftermarket automotive parts
Explore established alternatives with related products in the current catalogue.
Black Rhino: understand the range before choosing
The Black Rhino page is a single disposable-style nitrile glove range in four sizes. Live evidence supports black powder-free nitrile, a beaded cuff, ambidextrous design and 100 gloves per box in small, medium, large and extra large. No authoritative UK certification, thickness or chemical permeation sheet was established, so the page does not claim an EN rating or broad chemical protection.
AutoMotoPart currently lists 4 Black Rhino items. The largest Black Rhino groups are 4 personal protective equipment entries. Black Rhino totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact Black Rhino listing, its current technical information and the item in front of you must agree.
What the Black Rhino page actually covers
| Product group in this range | Current entries | Selection focus |
|---|---|---|
| Personal Protective Equipment | 4 | Choose small NG502FS from measured hand width and length, not from assumptions about gender or job role. |
All four products contain 100 gloves with the same evidenced construction; size is the only supported technical variation. Codes end FS, FM, FL and FXL for small through extra large. No fifth size, different thickness, certification level or chemical formulation is evidenced in this AutoMotoPart range.
Build a reliable shortlist
Identify the hazard before the size. Record substance, concentration, temperature, splash or immersion pattern, expected wear time and mechanical risks. If nitrile is appropriate, measure the dominant hand and choose the closest supported size using the current product chart, then test dexterity and cuff coverage.
| Check | Why it matters | Useful evidence |
|---|---|---|
| Size | Stretching or loose folds alter dexterity, grip and barrier thickness | Measured palm and finger dimensions plus trial fit |
| Chemical | Nitrile compatibility varies by exact formulation and substance | Current safety data and NG502F permeation information |
| Contact | Brief splash and prolonged immersion need different protection | Exposure duration, concentration and change schedule |
| Mechanical | Thin nitrile does not replace cut, puncture or impact PPE | Sharp edges, needles, pinch points and tool assessment |
| Thermal/electrical | No heat, flame, arc or insulating rating is evidenced | Certified task-specific glove and isolation method |
| Hygiene | Dark gloves can transfer invisible contamination | Single-task policy, removal method and hand washing |
Do not double-glove simply to compensate for missing chemical data. Layering changes fit and dexterity and does not provide a known breakthrough time unless the PPE assessment specifies the combination.
Small, medium, large and extra-large fit
The four live variants cover small, medium, large and extra large. Hand size is not reliably predicted by height or usual clothing size. Measure around the dominant palm and from wrist to fingertip as the product chart instructs. A correct glove reaches the fingertips without stretched webbing and allows a full fist and precision grip without loose material.
Tight gloves fatigue the hand, create pressure at the thumb and thin the material across knuckles. Loose gloves reduce tactile control and can snag on parts. If no listed size fits both length and width, choose another approved glove model rather than accepting a poor fit. Never trim a cuff or fingers.
Chemical compatibility and breakthrough
Nitrile is a polymer family, not a universal chemical barrier. Oils, fuels, ketones, aromatics, chlorinated solvents, acids, bases and uncured resins interact differently with each formulation. The product label supplied here contains no permeation table. Consult the chemical safety data and obtain documented compatibility for the exact Black Rhino code before work.
Breakthrough time under a laboratory test is not the same as a safe working duration after stretching, abrasion and higher temperature. Set a conservative glove-change interval and replace after splash or visible swelling, softening, stickiness or colour change. For mixtures with unknown ingredients or sustained immersion, use a specialist glove selected by a competent PPE assessment.
Mechanical, heat and electrical limitations
The words heavy duty and strong do not establish cut, needle, tear, impact or puncture performance. Sheet metal, cable strands, drill swarf and broken glass can penetrate disposable nitrile. Use task-specific cut-resistant or puncture-resistant gloves where they do not create entanglement risk, and handle sharps with tools and containers rather than fingers.
No thermal, flame, welding, arc-flash or electrical-insulation marking is evidenced. Nitrile can melt or burn and may worsen a hot-contact injury. Isolate circuits and use certified electrical gloves and protectors where required. Around rotating drills, grinders, lathes and belts, follow machinery rules; a glove can be caught and pull the hand into the mechanism.
Donning, changing and removing
Inspect the box and each glove for damage, contamination and age. Put gloves onto clean dry hands and pull from the cuff without touching dirty surfaces. Do not inflate by mouth. If a glove tears while dressing, discard it. Keep nails smooth and cover skin cuts with the approved dressing before selecting suitable glove protection.
Change between dirty and clean tasks, between customer vehicles and before touching phones, steering wheels, door handles or food. To remove, pinch the outside near one wrist, peel it inside-out, hold it in the gloved hand and slide clean fingers beneath the remaining cuff. Avoid snapping contaminated cuffs. Wash hands after disposal even if no leak is visible.
Skin health, storage and disposal
Powder-free construction removes one common source of mess but does not guarantee that every wearer will avoid irritation. Occlusion, sweat, residual chemicals and contaminants inside the glove can contribute to dermatitis. Report redness, itching or cracking, review change frequency and seek occupational-health advice rather than applying moisturiser inside a working glove.
Store boxes closed, dry and away from sunlight, ozone, heat and chemical vapour according to the label. Rotate stock and keep different sizes clearly separated. Uncontaminated gloves may follow the local general-waste route, while gloves carrying oil, paint, solvent, biological or hazardous chemical residue need the waste classification for that material. Never recycle contaminated gloves with clean plastic film.
From identification to a checked result
| Stage | Good practice for this range | Mistake to avoid |
|---|---|---|
| Assess | Identify chemical, duration, sharp, heat, electrical and entanglement hazards | Choosing nitrile for every workshop task |
| Size | Measure hand and trial S, M, L or XL for full movement | Using a tight glove because it feels more precise |
| Verify | Check NG502F box, expiry and exact compatibility information | Inventing protection from the heavy-duty wording |
| Use | Inspect, change on damage or schedule and avoid cross-contamination | Washing and reusing a contaminated glove |
| Remove | Peel inside-out, dispose by contaminant and wash hands | Touching skin and clean surfaces with the outer glove |
At shared glove stations, post the size chart and substance-specific selection rules rather than only colour coding. Record which tasks require another certified glove so availability does not drive unsafe substitution.
Reading real Black Rhino references
The Black Rhino names below are examples from the current range and show why the complete description matters. They are not universal Black Rhino recommendations and should not be treated as a fitment list. Within Black Rhino, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.
| Example listing | What to verify beyond the name |
|---|---|
| Black Rhino Heavy Duty Powder Free Nitrile Gloves - Large | NG502FS small, NG502FM medium, NG502FL large or NG502FXL extra large |
| Black Rhino Heavy Duty Powder Free Nitrile Gloves - Medium | Nitrile, powder-free, ambidextrous, beaded cuff and box of 100 |
| Black Rhino Heavy Duty Powder Free Nitrile Gloves - Small | Substance identity, concentration, temperature, contact time and exact compatibility data |
| Black Rhino Heavy Duty Powder Free Nitrile Gloves - Extra Large | Cuts, sharps, heat, flame, electricity, rotating tools, hygiene and waste limitations |
No reliable UK EN declaration or exact thickness sheet was established for the NG502F range, so none is claimed. Check the delivered box and supplier documents if a regulated PPE task requires certification evidence.
Common errors around Black Rhino products
- Treating heavy duty as proof of an EN chemical, cut or puncture rating.
- Choosing glove size from usual clothing size without measuring the hand.
- Using an over-tight glove that thins and tears across knuckles and thumb.
- Relying on nitrile against an unknown solvent or mixture without breakthrough data.
- Handling sharp metal, needles, heat or live electrical parts with these gloves alone.
- Wearing gloves near rotating machinery where entanglement is possible.
- Washing, reusing or moving a contaminated glove from a dirty task to a clean cabin.
- Removing gloves by touching the contaminated outer surface with bare skin.
Black Rhino questions and answers
Q: Which Black Rhino glove sizes are listed?
A: Small, medium, large and extra large are available.
Q: How many gloves are in a box?
A: Every live size description states a pack of 100 gloves.
Q: Are the gloves powder-free?
A: Yes. Powder-free is stated in every product title.
Q: Are they ambidextrous?
A: Yes. The live evidence describes the same glove for either hand.
Q: What is the purpose of the beaded cuff?
A: The cuff construction is evidenced, but no specific performance rating should be inferred without documentation.
Q: How should the correct size be chosen?
A: Measure the hand using the current size chart and trial the fit for fingertip seating and movement.
Q: Are these gloves resistant to every workshop chemical?
A: No. Obtain exact compatibility and breakthrough data for each substance and exposure.
Q: Do they have an EN chemical rating?
A: No authoritative UK EN declaration was established from the available product evidence.
Q: Can they protect against sharp metal?
A: No cut or puncture classification is evidenced; use task-specific mechanical protection.
Q: Can they be used for welding or electrical work?
A: No heat, flame, arc or electrical-insulation rating is evidenced.
Q: Can the gloves be washed and reused?
A: Do not do so unless the manufacturer expressly permits it; replace contaminated or damaged gloves.
Q: How should used gloves be discarded?
A: Classify them by the contaminant and follow the workplace and local waste procedure.
