1 Product
BRITISH NOVA
Your Current Vehicle
Or
Select Your Vehicle
Popular Part Types
Only part types stocked for this brand are shown.
Car Parts Categories
Browse the main catalogue areas in which this brand has matching products.
British Nova: understand the range before choosing
British Nova BN0010 is a professional solids-rich metallised emulsion floor dressing currently listed within Cleenol's British Nova range. The page contains one 5-litre gloss product, not a vehicle polish. It is intended for compatible rubber, linoleum, vinyl, vinyl-asbestos, thermoplastic, asphalt, sealed wood and sealed cork floors and is maintained through an appropriate spray-clean or mop-and-buff system.
AutoMotoPart currently lists 1 British Nova items. The largest British Nova groups are 1 janitorial & hygiene entry. British Nova totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact British Nova listing, its current technical information and the item in front of you must agree.
What the British Nova page actually covers
| Product group in this range | Current entries | Selection focus |
|---|---|---|
| Janitorial & Hygiene | 1 | The Janitorial & Hygiene range contains only British Nova Long-Life Gloss BN0010 in a 5-litre pack. |
One entry means there is no satin or antistatic variant on this page. Current wholesale packaging may list cases of two 5-litre containers, but the AutoMotoPart title is one 5-litre unit. BN0010 identifies gloss; BN0010/SATIN is a different product and must not be substituted.
Build a reliable shortlist
Record the substrate, manufacturer, age, seal, previous polish, traffic, cleaning chemicals and required slip performance. Test moisture and surface condition by the floor maker's method. If the floor type or old dressing is unknown, identify it before using stripper or polish.
| Check | Why it matters | Useful evidence |
|---|---|---|
| Product code | Gloss BN0010 and satin BN0010/SATIN are different finishes | Exact bottle code and current safety sheet |
| Substrate | Rubber, vinyl, asphalt, cork and wood need different preparation | Floor-maker approval, seal and discreet test |
| Old finish | Incompatible polish or residue can cause poor adhesion and patchiness | Maintenance history and approved stripping system |
| Coverage | Porosity and applicator change the theoretical 50m²/L/coat | Measured area, trial rate and coat count |
| Access | Wet polish and premature traffic create slip, marks and coating failure | Barriers, drying conditions and reopening check |
| Asbestos | Old vinyl-asbestos must not be abraded or disturbed casually | Asbestos register, condition and management procedure |
Do not use BN0010 on laminate merely because a review recommends it, or on unsealed wood and cork by analogy. Only the manufacturer's specified intact, prepared substrate should be coated.
BN0010 gloss finish and coverage
Cleenol's current British Nova page identifies BN0010 as a solids-rich metallised gloss dressing and says two coats are adequate for most floors. The live evidence states 50 square metres per litre per coat. A 5-litre bottle therefore provides up to 250 theoretical square metres for one coat, or roughly half that area for two, before allowance for waste and porosity.
Measure the area and include edges and inaccessible zones. Trial a small section to establish actual spreading rate. Do not stretch a coat until it becomes discontinuous or compensate with one heavy flood coat. Thin even layers dry and bond more predictably than puddles, which can remain soft and collect dirt.
Floor identification and preparation
Approved groups include rubber, linoleum, vinyl, thermoplastic, asphalt, sealed wood and sealed cork. Each must be sound, clean and compatible. Remove loose dirt and use the British Nova preparation sequence. Historic guidance names Nova Liquid 99 for cleaning and Starbrite for old emulsion removal, followed by neutralisation; current labels control exact dilution and sequence.
Rinse residue and allow complete drying. Old detergent, alkalinity, stripper, oil or wax can cause fisheyes, powdering or adhesion loss. Repair cracks and failed seal before coating. Protect skirtings and adjacent finishes. Do not mix stripper, neutraliser and polish or return used product to the original bottle.
Vinyl-asbestos and sensitive floors
The product list includes vinyl-asbestos floor, reflecting use as a surface dressing on intact legacy material. Asbestos fibres can be released if flooring is sanded, ground, aggressively stripped, cracked or lifted. Check the building asbestos register and management plan. Stop if the material is damaged or identity is uncertain and obtain competent asbestos advice.
Use only a non-disturbing approved cleaning and coating method. Never use a high-speed abrasive pad to expose the floor or scrape tiles to improve adhesion. Sealed wood and cork likewise need an intact approved sealer, controlled moisture and gentle preparation. Asphalt and thermoplastic floors can soften under incompatible chemicals, so test discreetly.
Coating, drying and slip control
Apply with a clean dedicated mop or applicator; published guidance says not to use sheepskin. Lay a thin uniform coat, maintaining a wet edge without overworking partly dried polish. Allow at least the current stated interval—historic instructions say 30 minutes—before the next coat, with longer time for cool or humid conditions. Keep traffic out overnight where directed.
Gloss can improve appearance but does not remove the need for a slip-risk assessment. Test the finished system under representative dry and foreseeable wet contamination with appropriate footwear and cleaning. Do not reopen because the surface looks shiny. Barriers and signs remain until the finish is dry, stable and free from tack or transfer.
Maintenance, safety and eventual removal
British Nova describes spray cleaning and mop-and-buff maintenance with compatible Nova products. Select the pad, machine speed and maintainer for the floor and finish; aggressive pads remove coating and can reach the substrate. Clean spills promptly, use entrance matting and avoid unrelated detergents that dull or soften the film. Recoat only after cleaning and adhesion assessment.
BN0010 safety data warns of possible allergic skin reaction, so follow the current label and workplace controls. Store sealed between the specified temperatures and protect from frost. When stripping eventually, collect contaminated slurry, prevent surface-water release and follow local effluent or waste requirements. Do not promise a fixed life because traffic, soil and maintenance determine durability.
From identification to a checked result
| Stage | Good practice for this range | Mistake to avoid |
|---|---|---|
| Identify | Confirm BN0010 gloss, floor, seal, old coating and asbestos status | Choosing from high-gloss wording alone |
| Prepare | Use compatible cleaner or stripper, rinse, neutralise and dry | Coating detergent, alkalinity or old loose polish |
| Apply | Lay measured thin coats with a clean approved applicator | Using sheepskin, puddling or stretching coverage |
| Cure | Control access through intercoat drying and overnight final cure | Reopening when the surface merely looks dry |
| Maintain | Use compatible pads and products, assess slip and plan removal waste | Mixing systems or abrading suspected asbestos floor |
Record BN0010 batch, area, actual usage, coat times, temperature and reopening decision. This identifies real coverage and helps future maintenance avoid incompatible chemicals or premature stripping.
Reading real British Nova references
The British Nova names below are examples from the current range and show why the complete description matters. They are not universal British Nova recommendations and should not be treated as a fitment list. Within British Nova, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.
| Example listing | What to verify beyond the name |
|---|---|
| Long Life Gloss Finish Floor Polish - 5 Litre | British Nova BN0010 gloss, one 5-litre container, current label and Skin Sens. safety data |
The live Cleenol company paragraph is generic and does not identify floor suitability. Current evidence shows Cleenol lists British Nova as a distinct range and BN0010 as the exact product. Generic universal and automotive catalogue wording was excluded.
Common errors around British Nova products
- Confusing BN0010 gloss with BN0010/SATIN or another Nova floor dressing.
- Treating theoretical 50m² per litre coverage as guaranteed on a porous floor.
- Applying polish over old loose dressing, detergent, alkalinity or dampness.
- Using one heavy coat instead of the instructed thin-coat system.
- Opening the area before intercoat and overnight cure requirements are met.
- Assuming high gloss guarantees safe slip performance in every condition.
- Sanding or aggressively stripping a suspected vinyl-asbestos floor.
- Mixing unrelated maintainer or releasing stripped polish to surface drains.
British Nova questions and answers
Q: What is the British Nova product code?
A: Long-Life Gloss Finish is BN0010.
Q: How much product is listed?
A: One 5-litre container.
Q: What is the stated coverage?
A: Fifty square metres per litre per coat under suitable conditions.
Q: How many coats are used?
A: Current manufacturer information says two are adequate for most correctly prepared floors.
Q: How long between coats?
A: Historic guidance says at least 30 minutes; follow the current label and extend for conditions.
Q: When can traffic return?
A: Only after the final coat has fully cured; published guidance calls for overnight drying.
Q: Which floors are listed?
A: Compatible rubber, linoleum, vinyl, thermoplastic, asphalt, sealed wood and sealed cork, plus managed intact vinyl-asbestos.
Q: Can it be used on unsealed wood?
A: No. The listed use is sealed wood, subject to sealer compatibility.
Q: Can vinyl-asbestos be machine stripped?
A: Do not abrade or disturb suspected asbestos; follow the asbestos management plan.
Q: Is the floor guaranteed non-slip?
A: No. Assess the finished system for actual floor, traffic, footwear and contamination.
Q: Can any cleaner maintain it?
A: British Nova recommends compatible system products; unrelated chemicals are at the user's risk.
Q: What safety issue is identified?
A: The current safety data says BN0010 may cause an allergic skin reaction.
