SWARFEGA

Swarfega on AutoMotoPart combines professional hand care with workshop maintenance products. Orange, Extreme, Expert and heavy-duty hand cleaners appear in pumps, tubs or cartridges, supported by oil-and-grease wipes and specialist wipes for paints and resins. Protect pre-work and Restore after-work creams, an Expert pack and the mobile Van Cradle's cleaner, sanitiser and cream make up the skin-care side. Separately, Jizer is listed as a five- or 25-litre parts degreaser, while Duck Oil appears as a 500ml spray and five-litre service product.

Identify which of those three jobs is being addressed before choosing by container size or the Swarfega name. The current AutoMotoPart selection contains 27 Swarfega items, led by 22 janitorial & hygiene entries, 4 maintenance entries, 1 swarfega cream soap 2l entry. These Swarfega figures describe the range on this page rather than every product the brand may make elsewhere.

For hands, assess the contaminant and use the weakest cleaner that will do the job, as the official Swarfega guidance recommends. Prevent contact through process controls and suitable gloves first; cleaning does not replace them. Check fragrance, scrubber, solvent, rinse or waterless method, dispenser fit and skin sensitivity. Pre-work cream can support skin care but is not a chemical-proof barrier. Provide hand drying and a reporting route for persistent dryness, itching, redness or cracking.

For Jizer or Duck Oil, use the current label and safety data to assess surface compatibility, ventilation, ignition, exposure, runoff and waste. Jizer is intended for non-porous workshop parts and should be tested on a small area; it is not a hand cleaner. Duck Oil is officially described as a silicone-free, non-conductive service spray, but that does not authorise spraying energised equipment—de-energise, isolate and follow electrical procedures. Keep product away from brakes, tyres, grips, belts and surfaces where oil creates loss of friction. Store pumps and bulk containers securely, prevent cross-filling and label application equipment. The products below offer a practical Swarfega comparison; final use depends on the exact task and current directions.

SWARFEGA brand logo

Your Current Vehicle

Or

Select Your Vehicle

Car Parts Categories

Browse the main catalogue areas in which this brand has matching products.

Manista Hand Cleanser Pump - for MAN3L

Janitorial

22 matching products

Hyperclean - 5 Litre

Engine Degreaser

2 matching products

3-In-One Multi Purpose Oil Spray - 200ml

Maintenance Sprays

2 matching products

Other popular manufacturers of aftermarket automotive parts

Explore established alternatives with related products in the current catalogue.

26 Products

Swarfega: understand the range before choosing

Swarfega is an SC Johnson Professional brand whose official UK range now extends beyond its familiar hand cleaners. The collection demonstrates three distinct areas: workplace skin care, Jizer parts degreasing and Duck Oil surface maintenance. Keeping those branches separate is essential because a skin product, solvent degreaser and service spray have different risk assessments, application methods and disposal routes.

AutoMotoPart currently lists 27 Swarfega items. The largest Swarfega groups are 22 janitorial & hygiene entries, 4 maintenance entries, 1 swarfega cream soap 2l entry. Swarfega totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact Swarfega listing, its current technical information and the item in front of you must agree.

What the Swarfega page actually covers

Product group in this rangeCurrent entriesSelection focus
Janitorial & Hygiene22Confirm whether the product is for skin, degreasing or mechanical surface maintenance, then match contaminant, format, equipment and safety data.
Maintenance4Use maintenance products only on permitted parts with ignition, exposure, friction and waste controls in place.
SWARFEGA CREAM SOAP 2L1Treat the 2L cream-soap reference as a particular wash product and verify its dispenser and rinse method.

Twenty-two entries are grouped as hygiene and five as maintenance or a specific cream-soap line. Within skin care, pumps, cartridges, tubs, wipes and mobile-cradle refills are not interchangeable. Within maintenance, Jizer and Duck Oil solve different tasks despite both contacting oily parts. Copy the full code and package format when purchasing or assigning a dispenser.

Build a reliable shortlist

Start with the exposure and desired endpoint. Skin should be clean without avoidable removal of natural oils; a component may need oil and grease removed before inspection or coating; a mechanism may need water displacement, penetration or light lubrication. The table separates those endpoints before any product is opened.

CheckWhy it mattersUseful evidence
Workpiece or skinProducts safe for metal or paint may be unsuitable for handsExact Swarfega category, label and safety data
ContaminantGeneral grime, oil, resin, tar and wet components require different actionRisk assessment and current product soil list
Required finishClean-rinsed, moisturised or lightly oiled surfaces are different outcomesNext process such as handling, painting, assembly or skin care
Application formatPump, cartridge, wipe, aerosol and bulk drum need different controlsContainer code, dispenser or applicator and expected throughput
CompatibilityPlastic, rubber, paint, electrical and friction parts can be affectedSmall-area test and product-specific exclusions
After-use controlResidue, rinse water, used wipes and bulk solvent need managed routesWorkplace waste procedure and safety information

Do not improvise by putting Jizer or Duck Oil into an unlabelled hand-pump bottle, and do not transfer skin cleanser into a maintenance sprayer. Dedicated, labelled equipment prevents mistaken skin contact, incompatible seals and a later worker applying the wrong residue before paint or assembly.

Jizer parts degreasing and surface checks

Swarfega Jizer is officially described as a solvent-based parts degreaser for oil and grease on a range of non-porous surfaces. The page carries five- and 25-litre formats, so plan controlled dispensing and secondary containment. Test compatibility on a small area before full cleaning, particularly on plastic, rubber, paint, labels or unknown coatings.

Remove the part from service and isolate energy before cleaning. Arrange ventilation and ignition controls from the safety data, wear the specified protection and keep contaminated liquid from drains or ground. Use a parts-cleaning setup compatible with the product, allow rinse or residue handling as directed, and do not return a bearing, brake or electrical component until it is dry and correctly lubricated or assembled.

Duck Oil as a workshop service spray

Duck Oil's official product information lists water displacement, penetration, seized-part release, light lubrication and light degreasing. The 500ml aerosol and five-litre drum require different application equipment. Select the smallest controlled method that reaches the intended joint without coating adjacent brakes, friction drives, tyres, floors or a future paint surface.

Non-conductive wording is a product property, not permission for live electrical work. Isolate and prove equipment safe through the relevant procedure, then protect connectors or materials excluded by the instructions. Wipe excess, verify that fasteners or guards remain secure and investigate severe corrosion rather than relying on repeated spray to free a safety-critical joint.

Orange, Extreme and Expert hand cleaners

Swarfega Orange is aimed at ingrained oil, grease and grime, while Extreme extends to tougher contaminants named by the manufacturer and Expert uses another heavy-cleaner formulation. Select from the actual soil and use the weakest effective choice. Apply to dry or wet hands only as specified, work it through the contamination and rinse fully where directions require it.

Never use Jizer, fuel, brake cleaner or workshop solvent on skin. Cuts, dermatitis symptoms or an unusual chemical exposure need the workplace response and occupational-health route, not more scrubber. Check cleanser ingredients and fragrance information for users, provide suitable drying and train workers to remove rings or contaminated gloves safely when the procedure calls for it.

Wipes, Van Cradle and mobile work

Heavy-duty wipe tubs are separated by oil-and-grease or paints-and-resins wording, while Extreme wipes and single packs offer other formats. Keep lids closed, take one wipe without contaminating the roll and dispose of used material for the contaminant it carries. A hand wipe does not turn a hazardous substance into ordinary waste and is not a substitute for washing where washing is required.

The Van Cradle starter system uses dedicated cleaner, sanitiser and protect cartridges for mobile settings. Match each refill to the cradle code and programme position, and never swap the liquids because the cartridges look alike. Mount the cradle securely in the vehicle, away from driving controls and loose-load areas, and inspect for leakage or heat damage. Users still need instructions, drinking-water and welfare arrangements appropriate to the work.

Protect, Restore and dispenser management

Swarfega Protect is a pre-work cream and Restore is an after-work conditioning product. HSE guidance supports suitable pre-work creams and moisturising as parts of a wider prevention approach, but creams cannot replace elimination, safer methods or gloves. Apply the correct stage to clean skin and prevent transfer onto grip surfaces, food, paintwork or a workpiece requiring adhesion.

The four-litre Hand Cleanse dispenser and Orange cartridges need an exact code match; pump packs and tubs are separate formats. Mount dispensers at a usable height with suitable fixings and room for cartridge replacement. Record refill, inspection and cleaning dates, and review the programme if use is unexpectedly low, product is repeatedly empty or workers report skin symptoms.

From identification to a checked result

StageGood practice for this rangeMistake to avoid
Define taskSeparate hand cleaning, parts degreasing and service lubricationSelecting by Swarfega name and pack size alone
Assess exposureIdentify soil, surface, user, ignition, electrical and waste risksAssuming familiar workshop use removes the need for safety data
Match formatPair cartridge, pump, wipe, cradle or bulk product with approved equipmentDecanting into an unlabelled or incompatible container
UseFollow dose, rinse, test-area, isolation and residue directionsUsing Jizer on skin or Duck Oil on friction parts
Close outDry, relubricate, inspect, dispose and restock as the task requiresLeaving contaminated wipes, runoff or oily overspray unmanaged

Keep the Swarfega code and safety information beside each dispenser or maintenance station. For bulk Jizer and Duck Oil, record the labelled applicator and waste route; for skin care, record the cleanser strength and refill. This reduces cross-use between products that share the brand but not the hazard or intended result.

Reading real Swarfega references

The Swarfega names below are examples from the current range and show why the complete description matters. They are not universal Swarfega recommendations and should not be treated as a fitment list. Within Swarfega, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.

Example listingWhat to verify beyond the name
Jizer Parts Degreaser - 25 Litre25L Jizer volume, non-porous surface, compatibility test, dispensing and solvent-waste controls
Jizer Parts Degreaser - 5 Litre5L Jizer drum, parts-cleaning setup, ignition/ventilation controls and residue route
Swarfega Duck Oil Service Spray - 500ml500ml Duck Oil aerosol, intended joint, isolation, overspray and friction-surface clearance
Swarfega Duck Oil Service Spray - 5 Litre5L Duck Oil format, labelled applicator, bulk storage, compatibility and excess removal
Swarfega SWC2LTSC SWARFEGA CREAM SOAP 2L2L cream-soap product code, wash role, dispenser, user group and rinse method
Swarfega Expert Single PackExpert pack contents, soil type, cleanser strength and individual instructions
Swarfega Van Cradle Skin Sanitiser - 750ml Cartridge750ml sanitiser cartridge, exact Van Cradle position, mobile storage and use policy
Swarfega Van Cradle Protective Cream - 700ml Cartridge700ml protect cartridge, cradle compatibility, pre-work stage and cream limitations

The first four listings are maintenance chemicals, followed immediately by skin products and mobile cartridges. A workshop shelf can therefore contain very different Swarfega hazards and endpoints. Preserve the product name, format and application equipment together rather than using a generic brand label on a bottle.

Common errors around Swarfega products

  • Using Swarfega Jizer or Duck Oil as hand cleaner because both remove oily residue.
  • Assigning Duck Oil's non-conductive description as permission to work on energised equipment.
  • Spraying oil onto brakes, tyres, belts, grips, floors or a surface awaiting paint.
  • Choosing the strongest hand cleanser for every worker and every soil.
  • Using a solvent wipe where the contaminant or workplace procedure requires hand washing.
  • Swapping cleaner, sanitiser and protect cartridges within the mobile cradle.
  • Calling pre-work cream a barrier that replaces suitable exposure control and gloves.
  • Discharging Jizer rinse, used solvent or contaminated wipes without the correct waste route.

Swarfega questions and answers

Q: What are the main Swarfega groups here?

A: The range combines occupational skin care, Jizer parts degreaser and Duck Oil workshop maintenance products.

Q: Can Jizer be used as hand cleaner?

A: No. It is a parts degreaser; choose a skin cleanser for the identified hand contamination.

Q: Should Jizer be tested first?

A: Yes. Official information says to test compatibility on a small area before cleaning the full surface.

Q: Can Duck Oil be sprayed onto live electrics?

A: No. Its property description does not replace electrical isolation and safe-working procedures.

Q: Where should Duck Oil be kept away from?

A: Avoid braking and friction parts, tyres, grips, floors and incompatible surfaces or future paint areas.

Q: How is hand-cleaner strength chosen?

A: Swarfega advises choosing the weakest cleaner that will remove the actual workplace soil.

Q: What is the difference between Orange and Extreme?

A: They target different levels or types of contamination, so use their exact official soil lists and directions.

Q: Do heavy-duty wipes replace washing?

A: Not automatically. Follow the contaminant assessment and workplace hygiene procedure.

Q: Are Van Cradle cartridges interchangeable?

A: No. Match cleaner, sanitiser and protect refills to their exact cradle positions and codes.

Q: Does Protect cream replace gloves?

A: No. It is a supporting pre-work cream within a broader exposure-control programme.

Q: What should happen to used Jizer or wipes?

A: Manage them by the safety data and workplace waste procedure for the contamination carried.

Q: What should be recorded at a Swarfega station?

A: Keep product and dispenser codes, strength or task, inspection, refill, applicator and waste information.