1 Product
GRANGERS
Your Current Vehicle
Or
Select Your Vehicle
Popular Part Types
Only part types stocked for this brand are shown.
Car Parts Categories
Browse the main catalogue areas in which this brand has matching products.
Other popular manufacturers of aftermarket automotive parts
Explore established alternatives with related products in the current catalogue.
Grangers: understand the range before choosing
Grangers is a British outdoor aftercare brand. The product here is G-Wax in an 80g tin, a traditional natural-beeswax treatment designed to nourish and protect leather footwear. Grangers says it can protect against water, stains and oils and is suitable for leather footwear, including footwear using GORE-TEX or eVent, but the footwear maker's material and care instructions remain decisive.
AutoMotoPart currently lists 1 Grangers items. The largest Grangers groups are 1 caravan & camping entry. Grangers totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact Grangers listing, its current technical information and the item in front of you must agree.
What the Grangers page actually covers
| Product group in this range | Current entries | Selection focus |
|---|---|---|
| Caravan & Camping | 1 | Use G-Wax on footwear whose exact leather and finish approve wax treatment, after a concealed colour and texture test, then apply two or three sparse coats to clean, dry material. |
This collection contains one 80g tin, SKU GRF79. It is a beeswax-based leather aftercare product, not a leather cleaner, repair compound, sole treatment or universal waterproofing guarantee. Material identity and finish determine suitability.
Build a reliable shortlist
Read the footwear care label and identify smooth full-grain, nubuck, suede, coated or patent leather, textile and synthetic panels, waterproof membrane, adhesives, colour and existing finish. Decide whether wax is permitted and what appearance change is acceptable before testing.
| Check | Why it matters | Useful evidence |
|---|---|---|
| Leather type | Different structures absorb wax and change appearance differently | Footwear maker's exact upper-material description |
| Finish | Wax may darken, shine or flatten a textured nap | Concealed test observed after complete drying |
| Membrane | GORE-TEX/eVent suitability does not repair membrane damage | Boot construction, liner condition and care instructions |
| Cleanliness | Grit, salt and oil can be trapped beneath wax | Clean, residue-free, naturally dry upper |
| Application | Thin layers preserve control better than one heavy coat | Clean cloth, sparse quantity and drying between coats |
| Exclusions | Soles, traction rubber, mesh and interiors have different needs | Precise masking and panel-by-panel material check |
Do not use the phrase all leather as a substitute for a material test. Where the maker prohibits wax, preserving colour, nap, factory finish or warranty takes priority over the general G-Wax range claim.
Identify the leather and finish first
Smooth full-grain boot leather commonly accepts a traditional wax, and that is the material named in the live evidence. Grangers' current page extends suitability to all leather footwear and accessories. However, footwear may combine full-grain panels with suede, nubuck, coated leather, fabric, rubber and adhesives. Each section can react differently to the same application.
Wax normally deepens some colours and may add lustre. On nubuck or suede it can compress the raised fibre and create a smooth, darker patch that brushing may not reverse. Patent and heavily pigmented finishes may not absorb it evenly. Test a pea-sized or smaller controlled amount in a hidden location, use the planned number of coats and judge colour, texture, tack and flexibility only after full natural drying.
Clean without damaging the boot
Brush off dry grit first so abrasive particles are not rubbed into the grain. Follow the footwear maker's cleaning method for remaining soil, salts and old incompatible dressing. Remove laces if they obstruct the tongue or seams. Do not use household detergent, solvent, saddle preparation or aggressive heat unless the material guidance specifically permits it.
Allow the whole upper, seams and lining to dry naturally before waxing. A surface that feels dry may still hold moisture in folds or padding. Stuffing with suitable absorbent paper may support shape if the maker allows it, but avoid direct radiators, fires and hairdryers because rapid heat can stiffen leather, affect glue and deform waterproof liners.
Build protection with sparse coats
Grangers says to put G-Wax sparingly on a clean cloth, rub it into clean dry leather and include seams and joints. Work methodically so that the film stays thin and even. Do not dig contaminated cloth back into the tin. Use a fresh section of cloth if it picks up dirt or dye, and avoid filling stitching channels or hardware with excess wax.
The official method recommends two or three thin coats with drying between them. This offers more control than one thick layer and makes appearance changes easier to stop. Apply extra only where the previous film has absorbed and the instructions support it. Remove visible surplus before it becomes a sticky dirt-holding layer, and allow the completed footwear to dry naturally before use.
Respect membranes, seams and mixed materials
Grangers names GORE-TEX and eVent as suitable and claims maximised breathability when used correctly. The breathable waterproof membrane normally sits behind the outer material; waxing the leather does not patch a membrane hole, failed seam tape or liner damage. If the boot leaks, first distinguish wet outer leather, entry through the opening and actual construction failure.
Keep wax away from open mesh, stretch fabric, absorbent lining, insoles and drainage areas unless their manufacturer approves it. Do not coat sole tread or climbing zones, where residue can reduce grip. At the rand and sole bond, apply only to supported leather and avoid forcing product into an adhesive interface. Stop if edges lift, colour transfers or the surface remains unusually tacky.
Set realistic care and protection expectations
G-Wax can support leather condition and resistance to water, stains and oils, but it cannot make damaged footwear indestructible or permanently waterproof. Cuts, cracked grain, failed stitching, separated soles and worn membranes require repair or replacement. Salt and mud still need prompt cleaning, and saturated boots still need controlled drying after use.
Inspect treated footwear in good light before a long trip. Flex the upper gently, check laces and hardware and confirm sole grip is uncontaminated. Store the closed 80g tin in a cool place away from heat and dirt. Reapply when the leather's condition and maker guidance indicate, not after every wear by default; cumulative wax can alter appearance and collect debris.
From identification to a checked result
| Stage | Good practice for this range | Mistake to avoid |
|---|---|---|
| Identify | Check leather, finish, membrane and mixed panels | Assuming every leather surface reacts like full grain |
| Test | Treat a concealed patch and let it dry completely | Judging colour while the wax is still wet |
| Clean | Remove grit, salt and residue, then dry naturally | Sealing dirt or moisture beneath a dressing |
| Apply | Use a clean cloth and two or three sparse coats | Loading one thick sticky layer onto the upper |
| Verify | Check finish, seams, sole grip and remaining faults | Treating wax as a repair for membrane or structural damage |
Keep a note of the test location and result where appearance matters, especially on mixed-colour or textured footwear. Future care should use the same confirmed method unless the footwear maker changes its advice.
Reading real Grangers references
The Grangers names below are examples from the current range and show why the complete description matters. They are not universal Grangers recommendations and should not be treated as a fitment list. Within Grangers, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.
| Example listing | What to verify beyond the name |
|---|---|
| G-Wax Natural Beeswax Protection - 80g | GRF79 G-Wax 80g tin, intact product, clean cloth, footwear care label, exact leather/finish and concealed dried test |
There is no vehicle fitment because this is outdoor footwear care. The product's broad leather and membrane claims remain conditional on exact material, finish, construction and application method.
Common errors around Grangers products
- Applying to unknown leather without testing colour and texture.
- Using wax on suede or nubuck while expecting the nap to remain unchanged.
- Trapping grit, salt, oil or moisture under the coating.
- Applying one thick layer instead of controlled thin coats.
- Heating boots aggressively to speed drying.
- Coating outsole tread, mesh, lining or unsupported adhesives.
- Claiming wax repairs a leaking waterproof membrane.
- Reapplying on a schedule despite heavy residual build-up.
Grangers questions and answers
Q: What Grangers product is listed?
A: G-Wax natural beeswax protection in an 80g tin, SKU GRF79.
Q: Which material is the clearest match?
A: The live listing specifically names full-grain leather footwear.
Q: Can it be used on all leather?
A: Grangers says all leather, but exact finish and footwear-maker guidance still require a concealed test.
Q: Will it change colour?
A: It can darken or add shine, so test and allow the sample to dry fully.
Q: Can it be used on suede or nubuck?
A: Only with specific approval and acceptance that wax can flatten and darken the nap.
Q: Is it suitable for GORE-TEX or eVent boots?
A: Grangers says yes, subject to the footwear maker and correct thin application.
Q: Will it repair a leaking membrane?
A: No. Wax conditions the outer leather; membrane or seam failure needs separate diagnosis.
Q: Must the boots be clean first?
A: Yes. Remove abrasive dirt and residues and let the footwear dry naturally.
Q: How many coats are recommended?
A: Grangers recommends two or three thin coats with drying between them.
Q: Can a radiator speed drying?
A: Avoid direct heat; it can damage leather, adhesives and construction.
Q: Should the sole be waxed?
A: No. Keep wax off tread and other grip surfaces.
Q: How often should it be reapplied?
A: Use leather condition and the maker's care advice, avoiding unnecessary build-up.
