1 Product
ISOL8
Your Current Vehicle
Or
Select Your Vehicle
Popular Part Types
Only part types stocked for this brand are shown.
Car Parts Categories
Browse the main catalogue areas in which this brand has matching products.
Other popular manufacturers of aftermarket automotive parts
Explore established alternatives with related products in the current catalogue.
Isol8: understand the range before choosing
The Isol8 range here is one 10-litre, approximately 1.3 kg bag of organic fibrous spill absorbent made from recycled coir without chemical treatment. The manufacturer lists water, oils, fuels, paints, antifreeze, grease, acids, alkalis and body fluids among possible liquids. That broad list does not make the product universal: the spilled substance, reaction risk, vapour, PPE, containment and waste route must be identified first.
AutoMotoPart currently lists 1 Isol8 items. The largest Isol8 groups are 1 ten-litre organic absorbent entry. Isol8 totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact Isol8 listing, its current technical information and the item in front of you must agree.
What the Isol8 page actually covers
| Product group in this range | Current entries | Selection focus |
|---|---|---|
| 10L organic spill absorbent | 1 | One 10L/approximately 1.3kg recycled-coir absorbent bag: identify the liquid and its safety sheet first; spent absorbent inherits the contaminant's hazards and waste classification. |
There is no chemical-specific pad, boom or neutraliser in this range. Ten litres is pack volume, not guaranteed liquid capacity. Absorption varies with viscosity, temperature, surface, contact time and saturation, so spill planning must use tested site data and reserve stock.
Build a reliable shortlist
Assess credible spill types, maximum release, drains, ignition sources and emergency responsibilities before purchase. Check each substance's safety sheet for incompatible absorbents, neutralisation, PPE and disposal. Choose dedicated hazardous-material equipment where a general organic absorbent is not authorised.
| Check | Why it matters | Useful evidence |
|---|---|---|
| Identity | Unknown liquid can be reactive, toxic or volatile | Container label, process record and current safety sheet |
| Compatibility | Organic coir may be unsuitable for oxidisers or reactive chemicals | Chemical spill section and site COSHH assessment |
| Scale | 10L bag does not equal 10L guaranteed uptake | Worst-case volume, tested absorbency and reserve factor |
| Ignition | Fuel/solvent vapour and saturated fibre can burn | Exclusion zone, ventilation and non-sparking equipment |
| Surface | Residue can remain slippery or attack flooring | Compatible decontamination and post-clean inspection |
| Waste | Absorbed substance controls classification/disposal | Waste code, container and authorised contractor |
Do not use Isol8 as a neutralising agent, vapour suppressant or proof that a spill is harmless. Escalate whenever substance identity, compatibility, exposure or containment is uncertain, and never work beyond training or the emergency plan.
Unused absorbent and contaminated absorbent are different hazards
The Isol8 safety sheet identifies unused material as mostly coir with moisture and inert content. Dust at high concentration may irritate eyes or airways, and the sheet recommends ventilation, side-protection safety glasses and dust respiratory protection when limits are exceeded. Dry organic fibre also has a stated auto-ignition temperature, so it must be kept from hot work and ignition.
Once used, the absorbed liquid dominates. Petrol-soaked coir emits flammable vapour; acid-soaked material may be corrosive; antifreeze or paint can be harmful and environmentally regulated. Never base PPE, storage or disposal on the unused-product sheet alone. Attach the contaminant identity and incident details to the waste container.
Control the release before spreading granules
Raise the alarm, keep unprotected people away and prevent vehicles or machinery carrying liquid beyond the area. Shut valves, upright containers or isolate equipment only when the risk assessment and training permit. Protect nearby drains with compatible covers or booms without standing in the liquid. For fuel, remove ignition and manage vapour under the safety sheet.
Estimate volume and confirm sufficient absorbent and waste containers are present. A ruptured bulk container, spill entering soil/water, or exposure casualty needs the emergency services/environmental response defined for the site. Granules do not replace bunds, drain isolation or leak repair. Never pour them into machinery, fuel tanks or drainage systems.
Apply and collect without spreading exposure
Open the lightweight bag carefully and distribute low to the surface to minimise dust. Work from the perimeter inward so the boundary is contained before the centre. Avoid throwing material into a splash. Allow the fibres to contact the liquid, then turn or sweep gently with tools that are chemically compatible and non-sparking where required.
Add fresh material until there is no mobile liquid, but recognise that saturated absorbent may release under compression. Scoop into a compatible lidded container; do not compact flammable or reactive waste by hand. Inspect floor joints, under equipment and footwear. Decontaminate tools and remove PPE by the hazardous-substance procedure.
Verify the floor and investigate the source
The manufacturer's fast-acting and non-leaching descriptions are product claims under intended conditions, not a universal slip-resistance certification. Fine residue, detergent, oil film or damaged floor coating can remain hazardous. Use the substance-approved cleaning process, warning signs and access control until the surface passes the site's visual, touch or instrument check.
Record the leaking asset and correct it before restarting. Repeated absorbent use beneath a machine can hide a hose, seal or tank failure and increases fire risk. Review why primary containment failed, whether bund capacity and drain protection were adequate, and whether the spill kit location and quantity supported a safe response.
Segregate, label and dispose lawfully
Do not mix incompatible spill wastes in one drum. Label source substance, hazards, date and location, keep the lid closed and use secondary containment. Flammable saturated absorbent needs storage away from ignition and self-heating risks under site rules. Biological contamination requires its own infection-control route.
Isol8 says the natural material can be incinerated, but only an authorised facility may decide whether contaminated waste is acceptable. Never burn it on site. Do not compost or place it in general waste unless a competent waste assessment explicitly permits it. Keep transfer notes and replenish the clean 10-litre bag immediately after use.
From identification to a checked result
| Stage | Good practice for this range | Mistake to avoid |
|---|---|---|
| Identify | Read label/SDS and assess scale, vapour and reactivity | Applying organic granules to unknown material |
| Isolate | Stop source safely, remove ignition and protect drains | Using absorbent instead of containment/emergency response |
| Absorb | Work perimeter inward with compatible tools and PPE | Throwing granules, splashing or raising dust |
| Collect/clean | Containerise saturated fibre and verify floor condition | Assuming absorbed means non-slip or decontaminated |
| Dispose/review | Classify by contaminant, use authorised waste route and fix source | Burning, composting or repeatedly masking leaks |
Document substance, estimated volume, exposure, absorbent quantity, drain/ignition controls, waste code/container and corrective action. Review remaining stock against the original risk-based minimum rather than simply replacing one bag.
Reading real Isol8 references
The Isol8 names below are examples from the current range and show why the complete description matters. They are not universal Isol8 recommendations and should not be treated as a fitment list. Within Isol8, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.
| Example listing | What to verify beyond the name |
|---|---|
| Organic Absorbent Spill Granules - 10 Litres | Isol8 10L organic absorbent, about 1.3kg dry weight, recycled coir/fibrous natural material |
The maker lists many liquids, but concentration, formulation and mixture context matter. The current safety data for the spilled chemical is the controlling source for response, PPE and disposal.
Common errors around Isol8 products
- Using Isol8 on an unidentified or reactive spill.
- Treating a 10L bag as guaranteed to absorb 10L of every liquid.
- Ignoring vapour, ignition and drain controls for fuel/solvent.
- Using unused-product PPE guidance for hazardous saturated material.
- Throwing granules and creating dust or splash.
- Declaring the floor safe without removing residual film.
- Mixing incompatible contaminated absorbents in one container.
- Burning or binning spent material because unused Isol8 is organic.
Isol8 questions and answers
Q: What size is listed?
A: One 10-litre bag weighing about 1.3kg dry.
Q: What is Isol8 made from?
A: The official sheet identifies mainly recycled coir with moisture and inert content.
Q: Will it absorb every liquid?
A: No. Identify the substance and confirm compatibility first.
Q: Does 10L mean 10L absorption?
A: No. Pack volume is not a universal uptake rating.
Q: Can it be used on acids or alkalis?
A: The maker lists them generally, but concentration and incompatibilities must be checked from the chemical SDS.
Q: Can it handle unknown spills?
A: No. Isolate and escalate unknown substances under the site plan.
Q: Is unused Isol8 dust-free?
A: The safety sheet still addresses dust irritation and ventilation/PPE at high concentration.
Q: Is a treated floor immediately safe?
A: Not necessarily; remove residue, decontaminate and verify slip condition.
Q: Can saturated material be squeezed or reused?
A: Do not compact or reuse contaminated absorbent; contain it safely.
Q: Can it be incinerated?
A: Only at an authorised facility after classification of the absorbed substance.
Q: Can spent Isol8 go in general waste?
A: Only if a competent waste assessment permits it; contaminant hazards usually control.
Q: What follows cleanup?
A: Repair the source, record the incident and restore spill-kit stock.
