5 Products
MANISTA
Your Current Vehicle
Or
Select Your Vehicle
Popular Part Types
Only part types stocked for this brand are shown.
Car Parts Categories
Browse the main catalogue areas in which this brand has matching products.
Manista: understand the range before choosing
Manista Natural is Comma's heavy-duty workshop hand cleanser. The AutoMotoPart range contains the same perlite cleanser in 3, 10 and 20-litre tubs plus two separate dispenser pumps: one for MAN3L and one for MAN10L. A pump is an accessory rather than cleanser, and neither pump title supports use on the 20-litre tub.
AutoMotoPart currently lists 5 Manista items. The largest Manista groups are 5 janitorial & hygiene entries. Manista totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact Manista listing, its current technical information and the item in front of you must agree.
What the Manista page actually covers
| Product group in this range | Current entries | Selection focus |
|---|---|---|
| Janitorial & Hygiene | 5 | Choose the 3L MAN3L tub for lower-volume stations or where its dedicated pump and regular turnover suit hygiene control. |
Three of five products are identical cleanser chemistry in 3L, 10L and 20L quantities. The other two contain no cleanser: they are pumps dedicated to MAN3L and MAN10L. The range therefore offers three stock volumes but only two evidenced pump fits. Pack size does not change the directions or occupational-hygiene boundary.
Build a reliable shortlist
Estimate use from worker numbers, contamination type and hand-wash frequency, then choose a tub that will remain closed and turn over within shelf life. Confirm the wash point has potable water, drainage controls, clean drying, skin-care guidance and a pump designed for that exact container.
| Check | Why it matters | Useful evidence |
|---|---|---|
| Container | 3L, 10L and 20L tubs differ in weight, footprint and handling | MAN3L, MAN10L or 20L code and safe station space |
| Pump | Threads, lid and dip-tube lengths are container-specific | Exact MAN3L or MAN10L accessory title |
| Usage | Low turnover leaves open product longer; high use needs reliable dispensing | Workforce consumption and stock rotation record |
| Contamination | Some chemicals require exposure controls and medical guidance, not stronger scrubbing | Safety data for the substance on the skin |
| Skin condition | Perlite friction and frequent washing can aggravate damaged skin | Worker report, occupational-health and product guidance |
| Wash station | Dirty pumps, shared scoops and poor drying spread contamination | Closed dispenser, potable water and clean towels |
A 20-litre tub can reduce packaging but is heavy and awkward to dispense directly. Do not lift, tilt or decant it repeatedly without a safe handling and labelled dispensing system approved for the product.
3L, 10L and 20L cleanser tubs
Comma lists MAN3L, MAN10L and MAN20L as available Manista Natural pack sizes. The cleanser specification and directions are common; the larger tub does not contain a stronger formula. Select quantity from use rate and handling. A 20-litre tub needs a level support capable of carrying its mass and a controlled method that avoids dipping hands or tools into the product.
Check the manufacture code and shelf-life information on arrival and rotate older stock first. Keep lids closed and do not top up a partly used tub from another batch because this hides age and can transfer contamination. Store away from temperature extremes and prevent water, swarf, oil or solvent entering the container.
MAN3L and MAN10L pumps
The MAN3L pump is designed specifically for the 3-litre container and fits its existing lid. The MAN10L pump is the corresponding accessory for the 10-litre tub. Their purpose is cleaner, measured and easier dispensing. They are separate catalogue products, so ordering a cleanser tub does not prove a pump is included.
Assemble with clean hands, following lid and dip-tube instructions. Prime into a controlled waste receptacle if directed and never cut the tube simply to make the wrong pump fit. Wipe the outlet routinely, investigate stiffness or leakage and replace a damaged pump. Do not push wire through a blockage where fragments or contamination could enter the cleanser.
Correct hand-washing sequence
Comma instructs users to apply Manista to hands, add a little water and rub thoroughly to form a lather. After a partial rinse, continue rubbing to release ingrained grime, then rinse thoroughly. Follow that sequence rather than wetting hands heavily first or scrubbing dry perlite aggressively. Pay attention to fingertips, nail folds and between fingers without abrading skin.
Remove product and contamination completely, then dry with a clean method. Shared fabric towels can re-contaminate hands. Use a workplace-approved conditioning cream after washing if the skin programme specifies one, but do not add cream to the Manista tub or pump. A residue-free rinse is important before eating, drinking, smoking, using contact lenses or handling clean parts.
Exposure prevention and skin health
Heavy-duty cleanser belongs at the end of an exposure-control chain. Substitute less hazardous chemicals where possible, use closed systems, tools and suitable gloves and change contaminated PPE promptly. Oils and solvents can cause irritation or dermatitis, and some substances penetrate damaged skin. A cleanser cannot neutralise every hazardous material.
Inspect hands for dryness, redness, cracks, itching or persistent contamination. Report symptoms early through the occupational-health process and review glove selection and work method. Avoid repeated hard scrubbing on broken skin. If a chemical has a specific decontamination instruction, follow its safety data and emergency procedure rather than defaulting to Manista.
Eye contact, hygiene and waste
Keep cleanser away from eyes and do not wash the face with perlite product. If exposure occurs, use the current label and site eyewash procedure and obtain medical advice where symptoms continue. Never handle contact lenses with contaminated hands. Keep the wash station supplied with clean water and make the product safety information accessible.
Oil, paint, resin and chemical washed from hands can make the wastewater controlled waste. Follow the site's separator and drain-consent arrangements rather than assuming hand-wash water can always enter a surface drain. Clean spills promptly to prevent slips, close the tub and dispose of empty contaminated packaging through the approved local route.
From identification to a checked result
| Stage | Good practice for this range | Mistake to avoid |
|---|---|---|
| Prevent | Control exposure with process, tools and suitable gloves | Relying on cleanser after bare-hand contact |
| Dispense | Use clean dedicated MAN3L or MAN10L pump and minimum quantity | Dipping dirty hands into a tub |
| Wash | Add a little water, lather, partly rinse, rub again and rinse fully | Dry aggressive scouring with excess product |
| Dry and inspect | Use clean drying and check skin for irritation or cracks | Returning to gloves with wet damaged hands |
| Maintain | Close, rotate and clean stock and manage contaminated washings | Topping up or decanting into unlabelled dispensers |
Record cleanser batch and opening date at each wash point, plus pump type and inspection schedule. Occupational-health trends can then be linked to work tasks, glove use and wash frequency rather than blamed on one product without evidence.
Reading real Manista references
The Manista names below are examples from the current range and show why the complete description matters. They are not universal Manista recommendations and should not be treated as a fitment list. Within Manista, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.
| Example listing | What to verify beyond the name |
|---|---|
| Manista Heavy Duty Hand Cleanser with Perlite - 20 Litre Tub | MAN3L 3L, MAN10L 10L or MAN20L 20L cleanser container |
| Manista Hand Cleanser Pump - for MAN3L | Dedicated MAN3L or MAN10L pump, lid fit, dip tube and outlet condition |
| Manista Heavy Duty Hand Cleanser with Perlite - 10 Litre Tub | Contaminant safety data, gloves, exposure controls and site first aid |
| Manista Hand Cleanser Pump - for MAN10L | Comma washing sequence, potable rinse, clean drying, skin monitoring and waste route |
| Manista Heavy Duty Hand Cleanser with Perlite - 3 Litre Tub | MAN3L 3L, MAN10L 10L or MAN20L 20L cleanser container |
The pump titles include Hand Cleanser but are accessories only. Confirm whether the order line is cleanser or dispenser, especially when replenishing a station that already has a tub or pump.
Common errors around Manista products
- Ordering the MAN3L or MAN10L pump and expecting it to contain cleanser.
- Forcing the 3L pump onto a 10L or 20L tub or cutting its dip tube to improvise.
- Decanting Manista into an unlabelled bottle or topping up old contaminated product.
- Using cleanser as a substitute for gloves and controlled handling of oils or solvents.
- Cleaning hands with petrol, thinners, brake cleaner or another workshop solvent first.
- Scrubbing broken or irritated skin aggressively with perlite particles.
- Using Manista around eyes or face or handling contact lenses before a full rinse.
- Sending heavily oil- or chemical-contaminated wash water to an unauthorised drain.
Manista questions and answers
Q: Which Manista cleanser sizes are available?
A: The range contains 3-litre, 10-litre and 20-litre tubs.
Q: Are the formulas different by pack size?
A: No difference is evidenced; Comma lists them as pack sizes of Manista Natural cleanser.
Q: What does the MAN3L pump fit?
A: It is designed for the existing lid of the 3-litre MAN3L container.
Q: What does the MAN10L pump fit?
A: It is designed for the 10-litre MAN10L container.
Q: Is a 20-litre pump listed?
A: No. Obtain an approved 20-litre dispensing arrangement separately.
Q: How is Manista used?
A: Apply to hands, add a little water, lather, partly rinse, rub again and rinse thoroughly.
Q: What is the perlite for?
A: It provides the gritty physical cleaning action for ingrained workshop soil.
Q: Can Manista replace protective gloves?
A: No. Prevent hazardous skin contact first with suitable controls and PPE.
Q: Can it be used on the face?
A: No. It is a hand cleanser; keep the gritty product away from eyes and sensitive areas.
Q: What if skin becomes sore or cracked?
A: Stop or reduce exposure as advised, report symptoms and seek occupational-health or medical guidance.
Q: Can the tub be topped up?
A: Avoid topping up because it hides batch age and can contaminate fresh product.
Q: How should contaminated wash water be handled?
A: Follow the site's drainage, separator and hazardous-substance arrangements for the removed soil.
