4 Products
POWER-TEC
Your Current Vehicle
Or
Select Your Vehicle
Popular Part Types
Only part types stocked for this brand are shown.
Car Parts Categories
Browse the main catalogue areas in which this brand has matching products.
Other popular manufacturers of aftermarket automotive parts
Explore established alternatives with related products in the current catalogue.
Power-TEC: understand the range before choosing
Power-TEC is a professional body-repair tool range distributed by The Tool Connection. The AutoMotoPart page contains six unrelated workshop items: a door-skin hammer, AiroPower adaptor hook, twisted Miracle pulling bits, 18TPI air-saw blades, a 2m safety cable and gravity spray-gun filters. Each belongs to a different repair stage and requires its matching system, workpiece and safety process.
AutoMotoPart currently lists 6 Power-TEC items. The largest Power-TEC groups are 4 tools entries, 1 airopower bit hook entry, 1 door skin hammer entry. Power-TEC totals can change, so a category count is orientation rather than proof that a particular reference suits a vehicle, workplace or job. The exact Power-TEC listing, its current technical information and the item in front of you must agree.
What the Power-TEC page actually covers
| Product group in this range | Current entries | Selection focus |
|---|---|---|
| Tools | 4 | Use 91318 only as a door-skin reforming hammer with sound faces, secure head and undamaged hickory shaft. |
| AIROPOWER BIT HOOK | 1 | Fit 91510 only to the specified AiroPower 91511 system and compatible Miracle straight or twisted bits. |
| DOOR SKIN HAMMER | 1 | Choose twisted pulling bits only where the panel material, weld method, spacing and pull direction are approved. |
The six products divide into three pulling-system parts, one panel hammer, one air-saw blade pack and one spray filter pack. Only 91318, 91510 and the 92306 blade relationship are identified by exact Power-TEC part references in titles or official pages. No live product provides a vehicle fitment or structural repair instruction.
Build a reliable shortlist
Identify the damaged panel, construction material, vehicle repair method and required operation before selecting a tool. Record the parent equipment part number, air supply, intended force and attachments. For consumables, confirm machine or gun model, dimensions, material and replacement interval.
| Check | Why it matters | Useful evidence |
|---|---|---|
| Parent system | Adapters and consumables depend on a named hammer, puller, saw or gun | Power-TEC part number and current product sheet |
| Work material | Mild steel, high-strength steel and aluminium have different repair limits | Vehicle manufacturer body-repair manual |
| Force or speed | Pull loads, blade stroke and hammer impact can release stored energy | Tool rating, air pressure and controlled setup |
| Attachment | Hook, bit, clamp, cable and blade must lock without wear | Clean inspection and specified retaining method |
| Consumable | Tooth pitch and filter mesh affect cut and coating flow | Material thickness, paint data and equipment maker guidance |
| Environment | Swarf, dust, noise, fumes and ignition risks need controls | Extraction, PPE, isolation and hazardous-area procedure |
Never extend a handle, exceed air pressure or combine mismatched pulling hardware to obtain more force. If the panel does not move as planned, unload the system and reassess anchorage, geometry and repairability.
91318 door-skin hammer
Power-TEC describes 91318 as a professional door-skin hammer made from induction-hardened 1055 medium-carbon steel with polished faces and a hickory shaft. Its straight and angled curved faces provide access for reforming a folded door-skin edge. It is not a general demolition hammer, and the narrow faces can mark unsupported outer skins if the technique or backing is wrong.
Inspect the head-to-handle joint, shaft grain, splits, mushrooming and face damage. Wear eye protection and support the panel with the appropriate dolly or folding tool. Use controlled blows along the repair sequence and preserve drain paths, adhesive seams and corrosion protection. A stretched, cracked or high-strength panel may need replacement instead of repeated hammering.
AiroPower hook and Miracle pulling bits
Part 91510 connects Miracle straight or twisted bits to Power-TEC AiroPower 91511, an air-powered push-and-pull body repair system. That makes it a system adaptor whose safe use depends on the AiroPower unit, selected bits, welded panel attachment and air supply. It must not be used for lifting, towing or improvised chain work.
Twisted Miracle bits create multiple pulling attachment points when installed by the approved spot-welding process. Remove coatings only as the repair method allows, protect electronics during welding and restore corrosion protection afterwards. Inspect weld quality before loading, pull in line without side-bending the adaptor and stand clear of the projected path if a bit releases.
18TPI blades for Air Saw 92306
The official 92311 product page identifies five 75mm, 18TPI blades for the low-vibration Power-TEC Air Saw 92306 and certain other listed popular machines. Confirm blade shank, clamp and machine support rather than using the word universal. Eighteen teeth per inch can suit particular sheet or section work but tooth engagement must be appropriate for the material thickness.
Disconnect the air line, bleed residual pressure and wear cut-resistant handling protection when changing a blade. Seat it fully and tighten the clamp by the saw instructions. Inspect behind the cut for wiring, glass, trim, fuel lines, batteries and structural reinforcement. Control the workpiece, start gently and stop if the blade snags, buckles, overheats or loses teeth.
Safety cable and gravity gun filters
The safety cable is described as 2m steel wire with clamps at both ends for the Power-TEC clamp range, but no working load or exact clamp references are present in the evidence. Verify those details on the supplied documentation before use. It may serve as a secondary restraint in an approved pulling setup; it is not a substitute for primary rated anchorage and must never restrain a person.
The gravity-gun filters use 280-micron mesh and are described for DeVilbiss, SATA and Iwata gravity-feed guns. Check the actual cup outlet, filter seat and coating technical sheet. A filter that is too fine can restrict material, while the wrong shape can bypass debris. Use clean gloves, keep solvent and paint off skin and replace contaminated filters instead of washing unless the manufacturer permits reuse.
Workshop setup and post-repair checks
Stabilise the vehicle on rated supports and isolate batteries or high-voltage systems by the repair manual before welding or cutting. Remove flammable trim where required, provide fire watch and use local extraction for dust and coating fumes. Inspect air hoses, regulators and couplers and keep bystanders outside the stored-energy zone.
After panel work, measure alignment, inspect welds and edges and confirm doors latch, seal and clear adjacent panels. Remove all welded bits and sharp burrs by the approved method, then restore primers, sealers and cavity protection. After spraying, dismantle and clean equipment safely. Record the Power-TEC tool and settings so later quality checks can trace the process.
From identification to a checked result
| Stage | Good practice for this range | Mistake to avoid |
|---|---|---|
| Plan | Confirm panel material, repair method, geometry and parent tool | Choosing an attachment before checking repairability |
| Inspect | Check hammer, hook, bits, cable, blade, filter and air supply | Loading worn or unrated hardware |
| Isolate | Secure vehicle, disconnect energy and establish extraction and exclusion | Cutting or welding near hidden systems |
| Operate | Use approved pressure, direction, speed, mesh and controlled technique | Adding force after the setup binds |
| Verify | Measure panel, inspect attachments and restore corrosion protection | Stopping when the surface merely looks straight |
Keep the Power-TEC part references and inspection result on the body-repair job card. Record any pulling-system accessory removed from service after deformation or shock loading rather than returning it to a shared tool cabinet.
Reading real Power-TEC references
The Power-TEC names below are examples from the current range and show why the complete description matters. They are not universal Power-TEC recommendations and should not be treated as a fitment list. Within Power-TEC, a shared family word can conceal a different dimension, connector, material, pack format, operating condition or installation side.
| Example listing | What to verify beyond the name |
|---|---|
| Power-tec 91318 DOOR SKIN HAMMER | 91318 hammer faces, head retention, hickory shaft and door-skin method |
| Gravity Gun Filter - 5 Piece | 91510 hook, 91511 AiroPower, Miracle bit type, weld and pull direction |
| Power-tec 91510 AIROPOWER BIT HOOK | 92311 18TPI blade, 92306 saw, material thickness, clamp and stroke |
| Safety Cable - 2m | Safety-cable rating and clamps or 280-micron filter, gun and coating compatibility |
| Miracle Pulling Bits - Twisted | 91318 hammer faces, head retention, hickory shaft and door-skin method |
| Blades For 92306 18TPI - 5 Pieces | 91510 hook, 91511 AiroPower, Miracle bit type, weld and pull direction |
The directory title calls the blade pack only 'Blades for 92306'. Use official part 92311 and 18TPI details when ordering, and do not confuse it with Power-TEC's 24TPI or 32TPI packs.
Common errors around Power-TEC products
- Using the door-skin hammer on an unsupported panel or with a loose, split handle.
- Treating the AiroPower bit hook as lifting, towing or general pulling hardware.
- Applying force to poorly welded Miracle bits or standing in their release path.
- Using a safety cable without a documented rating and exact clamp attachment.
- Installing an 18TPI blade in an unsupported saw or cutting material too thin for stable tooth engagement.
- Cutting without checking behind the panel for wiring, fuel, glass or a battery.
- Using a 280-micron filter because it fits while ignoring the coating specification.
- Completing cosmetic straightening without measuring structure and restoring corrosion protection.
Power-TEC questions and answers
Q: What Power-TEC products are listed?
A: The range includes a hammer, pulling accessories, air-saw blades, a safety cable and gravity-gun filters.
Q: What is part 91318?
A: It is a door-skin hammer with two curved face forms and a hickory handle.
Q: What is part 91510?
A: It is the AiroPower adaptor hook for compatible Miracle bits and Power-TEC system 91511.
Q: Can 91510 be used as a lifting hook?
A: No. It is a body-repair system adaptor, not lifting or towing equipment.
Q: What are twisted Miracle bits for?
A: They are weld-on body-panel pulling attachments used within a supported repair system.
Q: Which saw uses the 18TPI blades?
A: Power-TEC officially lists its low-vibration Air Saw 92306 and certain other supported machines.
Q: How many blades are supplied?
A: The evidenced 18TPI pack contains five blades.
Q: Does 18TPI suit every panel?
A: No. Match tooth pitch to material and thickness so several teeth engage without snagging.
Q: What is the 2m safety cable rated for?
A: The evidence does not state a load; verify the supplied Power-TEC documentation before use.
Q: What size are the gun filters?
A: They are described as 280-micron mesh in a pack of five.
Q: Will those filters fit every gravity gun?
A: No. Check the cup outlet and gun and coating manufacturer instructions.
Q: What must be checked after panel repair?
A: Verify dimensions, latch and seal operation, cut edges, weld removal and restored corrosion protection.
