41 Products
LAND ROVER (CHERY)
Land Rover (Chery) owners and repairers may encounter applications spanning DISCOVERY SPORT (L550). Even closely related versions can require different parts because of body type, powertrain, market specification or build date. Accurate matching therefore combines the selector result with registration or VIN information, engine and gearbox details, fitting position and the measurements shown on the individual listing.
For cars, the most useful checks are engine size and code, fuel type, gearbox, body style, driven axle and build date. Optional sports, towing or heavy-duty packages can also change braking and suspension hardware. Never assume that a part fitted to one trim level automatically fits another with the same model name.
The current range is strongest in areas such as filters and routine service, belts and timing, cooling, lighting and visibility and sensors and emissions. Diagnose the system before ordering: a warning light, leak, noise or uneven wear may be caused by wiring, mountings, contamination or another component rather than the obvious part. Check related seals, fixings, hoses and connectors, and follow the manufacturer’s repair sequence and tightening data.
Before beginning the job, read the full fitting notes and establish whether the component is supplied individually, as an axle pair or as part of a kit. Check which clips, gaskets, bolts and fluids are included, then obtain any additional single-use hardware. This prevents a safe, clean repair from being interrupted after dismantling and helps ensure the surrounding system is returned to the intended specification.
Safety-critical work needs suitable tools and competence. Brakes, steering, wheels, fuel systems and high-voltage equipment should not be disturbed without the correct procedure. After fitting, complete any bleeding, priming, bedding, coding or calibration required, then carry out static and controlled functional checks before normal road use.
Use the model and product information below as a practical starting point, then verify every application-specific detail on the product page. Keep the vehicle details beside you while comparing alternatives, particularly where several dimensions or production notes are shown. Compatible Land Rover (Chery) parts are listed in this collection.
Your Current Vehicle
Or
Select Your Vehicle
Choosing the right Land Rover (Chery) components
Correctly selection components for Land Rover (Chery) means working from the vehicle outward. Establish the model series and build details first, understand which setup has failed, and only then compare dimensions, references and technical ratings. This method is slower than choosing by appearance but greatly reduces the risk of fitting an incompatible or incomplete repair.
Applications represented in the selector include DISCOVERY SPORT (L550). This is useful orientation, not a substitute for the final application checks. Where a model appears more than once, the body designation or code may identify a separate generation or derivative.
How to identify the exact application
- Record the registration, VIN, model series and build date.
- Verify the engine or motor, fuel type, gearbox and driven axle.
- Note the body style, wheelbase, trim and any sports, towing or heavy-duty package.
- Diagnose the failed assembly and record fault codes or measurements prior to clearing them.
- Compare OE or cross-reference numbers, dimensions, connections, fitting position and included hardware.
- Read the installation notes for production splits, paired replacement, calibration and single-use fasteners.
For passenger vehicles, pay particular attention to engine code, body, brake package and transmission. If the removed component is available, compare it prior to dismantling the vehicle further, while remembering that an approved supersession can have a revised appearance.
Land Rover (Chery) model and body references
| Selector model | Application context | Details still specified |
|---|---|---|
| DISCOVERY SPORT (L550) | passenger-vehicle model series | Confirm generation, build date, powertrain and fitted equipment. |
Model tables help organise a search, but they cannot show every engine, market or running change. A model sold over several years might use alternative filters, sensors, brakes or belts. Where the listing specifies a chassis range, engine code or “from/to” date, treat that note as part of the application requirement.
Model-specific service focus
DISCOVERY SPORT (L550)
When working on a DISCOVERY SPORT (L550), begin with filters and routine service: identify the powertrain and compare filter dimensions, sealing faces and service specification. Continue by checking the powertrain, production split and fitting position. If database and physical evidence disagree, investigate the vehicle history or superseded reference instead of choosing the closest-looking alternative.
Components represented in this collection
Current product evidence for Land Rover (Chery) is concentrated around filters and routine service, belts and timing, cooling, lighting and visibility, sensors and emissions, steering and suspension and fuel delivery. Availability might change, and one category label might contain several designs. Use the table as an assessment guide, then rely on the individual product record for the final specification.
| Arrangement area | Important matching points | Related examination |
|---|---|---|
| Filters and routine service | Match engine code, dimensions, sealing arrangement and specified interval. | Inspect neighbouring components ahead of ordering. |
| Belts and timing | Establish engine code, tooth or rib count, length and tensioning layout. | Examine neighbouring parts before ordering. |
| Cooling | Match hose connections, opening temperature, pressure rating and sensor provision. | Examine neighbouring parts before ordering. |
| Lighting and visibility | Check lamp function, voltage, cap, homologation and left/right position. | Assess neighbouring parts before ordering. |
| Sensors and emissions | Match connector, lead length, location, emissions standard and engine code. | Inspect neighbouring components ahead of ordering. |
| Steering and suspension | Check axle, side, dimensions, load rating and sports or heavy-duty option. | Examine neighbouring parts before ordering. |
| Fuel delivery | Confirm fuel type, operating pressure, electrical connector and sealing components. | Assess neighbouring parts before ordering. |
What reliable performance depends on
| Factor | Effect on the repair | Practical control |
|---|---|---|
| Exact fitment | A near match might bolt on yet have the wrong travel, output, pressure, friction area or calibration. | Check every listed dimension, code and fitting note. |
| Assembly condition | Wear, blockage, poor alignment or electrical faults elsewhere might damage a replacement. | Inspect the complete assembly and specified the root cause. |
| Materials and fluids | Seals, friction materials and lubricants must tolerate the intended temperature and chemistry. | Use the specified grade, approval and cleaning method. |
| Installation | Contamination, incorrect torque or poor routing causes leaks, noise and early failure. | Follow model-specific service details with suitable tools. |
| Commissioning | Some arrangements need bleeding, priming, bedding, coding or calibration. | Complete the prescribed procedure prior to road use. |
Diagnosis before replacement
Good diagnosis separates the symptom from its cause. A noisy bearing might reflect misalignment, a new sensor code might originate in damaged wiring, and uneven brake wear may point to a seized slider or hose restriction. Preserve fault codes and measurements, examine the surrounding assembly and test supplies, grounds or pressures before committing to a replacement.
Compare symptoms across operating states: cold and hot, stationary and moving, lightly and heavily loaded. For this car, relevant stresses might include journey length, load, road salt, towing, heat cycles and urban stop-start use. A fault that appears only under one condition often provides a better clue than the loudest symptom.
Construction, materials and specification
Automotive components combine metals, elastomers, engineering plastics, friction compounds and electronic materials. Their grade and treatment matter. Heat-resistant rubber used in a coolant circuit is not automatically safe for fuel; a high-strength bolt is not interchangeable with one of the corresponding diameter but a distinct pitch or tightening method; and a lamp with the corresponding cap may have a distinct wattage or optical purpose.
| Specification | Typical variation | Why to verify it |
|---|---|---|
| Dimensions | Diameter, thickness, length, pitch, mounting centres and connector geometry. | Small differences may prevent fitment or change operating clearance. |
| Position | Front/rear, left/right, inner/outer, upper/lower or cylinder-specific. | Opposite-side components could look alike but have mirrored fittings. |
| Rating | Load, pressure, voltage, current, temperature, speed or friction class. | A lower or unsuitable rating may create a safety or durability problem. |
| Material | Steel, alloy, rubber compound, polymer, ceramic or composite. | Material controls corrosion, flexibility, heat tolerance and chemical compatibility. |
| Approval | Vehicle-maker specification, E-marking or category-specific standard. | Road-use and setup requirements could depend on the specified approval. |
Technology and application changes
Vehicle arrangements have evolved through better corrosion protection, tighter emissions control, networked electronics and more integrated assemblies. A superseded replacement might not look identical to the removed part, yet it may still be correct when the manufacturer cross-reference and technical data agree. Conversely, visual similarity alone never confirms interchangeability.
Networked control modules can require service mode, basic settings or calibration once mechanical work. Steering-angle, tyre-pressure, braking, lighting and emissions arrangements might all retain fault specification. Use a diagnostic process suited to the vehicle; do not disconnect the battery as a universal reset, because doing so might lose learned values without curing the cause.
Wear, inspection and repair urgency
| Finding | Possible meaning | Recommended response |
|---|---|---|
| Fluid leak or fuel smell | Failed seal, hose, housing or joint. | Stop and investigate immediately if fuel or brake fluid is involved. |
| Grinding, knocking or increasing vibration | Excessive wear, looseness, contact or imbalance. | Avoid further use when steering, braking, wheels or drivetrain security can be affected. |
| Warning lamp or message | A monitored value or circuit is outside its expected range. | Read codes and test the arrangement; do not erase evidence first. |
| Uneven wear or pulling | Misalignment, restricted movement, pressure imbalance or tyre issue. | Inspect both sides and measure the related geometry. |
| Overheating or burning odour | Drag, overload, poor cooling, short circuit or slipping drive. | Stop safely and allow diagnosis before further damage occurs. |
| Intermittent operation | Loose connection, moisture, heat-sensitive electronics or internal wear. | Test under the conditions that reproduce the fault. |
Maintenance and installation guidance
Plan the job prior to lifting or isolating the vehicle. Obtain the repair procedure, tightening values, fluid specification and any special tools. Support the vehicle on rated stands at approved points; a jack is a lifting device, not safe working support. Protect painted surfaces from aggressive fluids and use eye, hand and respiratory protection appropriate to the task.
Keep open hydraulic, fuel, intake and cooling arrangements clean. Start threads by hand, replace disturbed seals and single-use fixings where instructed, and route cables or hoses through their original clips. On paired safety parts, follow the service guidance for axle or side-to-side replacement. Mixing incompatible friction materials, fluids or part ratings may create imbalance.
After assembly, turn or move the mechanism by hand where appropriate, restore fluids, prime or bleed the circuit and reconnect assemblies in the specified sequence. Complete coding or calibration, then carry out a static review prior to a controlled low-speed test. Reinspect for leaks, heat, warning lamps, abnormal noise and loose fixings.
Common ordering and fitting mistakes
- Choosing by model name or image while ignoring build date and technical notes.
- Confusing a body designation with a differing generation carrying the identical badge.
- Failing to review front/rear, left/right, axle or engine position.
- Assuming registration lookup removes the need to compare dimensions and references.
- Replacing a sensor without testing wiring, power, ground and the mechanical assembly it monitors.
- Reusing locking hardware, seals or torque-to-yield bolts against the repair instruction.
- Applying general grease or sealant to a setup that requires a compatible specialist product.
- Skipping bleeding, bedding, priming, coding, service mode or calibration.
Upgrades, modifications and UK road use
An upgrade needs to answer a defined need such as heat capacity, load, corrosion resistance or repeated heavy use. A component described as performance-oriented is not automatically better for a road vehicle: cold response, noise, comfort, emissions compatibility and service life may be worse outside its intended operating window. Review how the change affects connected assemblies and declare relevant modifications to the insurer.
Brakes, tyres, steering, suspension, lamps, glazing, emissions equipment and warning setups may affect roadworthiness and the MOT result. An MOT is a minimum-condition review on the test date, not a maintenance schedule or proof that every component is suitable. The vehicle must remain safe and roadworthy between tests, and lighting, emissions or safety components must retain the approvals required for their application.
Land Rover (Chery) components FAQs
Q: How do I confirm a component fits my Land Rover (Chery)?
A: Start with registration or VIN data, then match model series, build date, engine or motor, gearbox, position, dimensions, connector and reference numbers.
Q: Why does the identical model show more than one component?
A: Production changes, engine choices, body styles and optional equipment may create several valid specifications within one model name.
Q: Is a registration lookup conclusive?
A: It is a strong starting point, but imported vehicles, running changes and factory options mean the listing details and removed component must still be checked.
Q: Might I order from the product photograph?
A: No. Images help recognition but could not show dimension, internal rating, pin function, side or production split.
Q: Needs to I use the VIN or engine code?
A: Use both when available. The VIN identifies the vehicle build, while the engine code may resolve powertrain-specific service components.
Q: Do related components require replacement at the corresponding time?
A: Replace pairs, kits, seals and single-use hardware where the manufacturer instructs, and always assess the complete surrounding assembly.
Q: What causes a new part to fail early?
A: Common causes include incorrect application, contamination, unresolved arrangement faults, wrong fluids, poor alignment and omitted commissioning steps.
Q: Does a fault code prove a sensor is faulty?
A: No. It records a detected condition. Wiring, supply, ground, leaks or mechanical faults may produce the corresponding code.
Q: May I fit Land Rover (Chery) components myself?
A: Only where you have the correct specification, tools and competence. Safety-critical and high-voltage work needs to be handled by an appropriately trained person.
Q: What must be checked once fitting?
A: Recheck torque, routing, fluid level, leaks, warning lamps and normal operation, then complete any bedding, calibration or controlled road test specified.
Q: Could the fault affect the MOT?
A: Yes, if it affects braking, steering, tyres, suspension, visibility, lighting, emissions, structure or a monitored safety setup.
Q: When needs to the vehicle not be driven?
A: Stop when there is impaired braking or steering, an insecure wheel, fuel or brake-fluid leakage, severe overheating, restricted visibility or another immediate safety risk.