15 Products
LINCOLN
Finding the correct Lincoln parts starts with identifying the exact car, not simply matching a familiar-looking component. The vehicle selector recognises applications including LS, CONTINENTAL TOWN CAR, NAVIGATOR (UN173), TOWN CAR II, TOWN CAR III, TOWN CAR Saloon and CONTINENTAL Saloon. Those names can cover different generations, engines, body styles, braking packages and electrical systems, so registration, VIN, production date and technical dimensions all matter when narrowing a result.
For cars, the most useful checks are engine size and code, fuel type, gearbox, body style, driven axle and build date. Optional sports, towing or heavy-duty packages can also change braking and suspension hardware. Never assume that a part fitted to one trim level automatically fits another with the same model name.
The current range is strongest in areas such as filters and routine service, braking, belts and timing, lighting and visibility and ignition and starting. Diagnose the system before ordering: a warning light, leak, noise or uneven wear may be caused by wiring, mountings, contamination or another component rather than the obvious part. Check related seals, fixings, hoses and connectors, and follow the manufacturer’s repair sequence and tightening data.
A useful pre-order check is to compare the listing with both authoritative vehicle data and the component already fitted. Record stamped references, connector shape, hose or thread size, overall dimensions and orientation. If those clues conflict with the registration result, pause and resolve the production split rather than guessing. Imported, modified and older vehicles especially may differ from a broad database match.
Safety-critical work needs suitable tools and competence. Brakes, steering, wheels, fuel systems and high-voltage equipment should not be disturbed without the correct procedure. After fitting, complete any bleeding, priming, bedding, coding or calibration required, then carry out static and controlled functional checks before normal road use.
Use the model and product information below as a practical starting point, then verify every application-specific detail on the product page. Keep the vehicle details beside you while comparing alternatives, particularly where several dimensions or production notes are shown. Compatible Lincoln parts are listed in this collection.
Your Current Vehicle
Or
Select Your Vehicle
Choosing the right Lincoln parts
A search for Lincoln parts is most reliable when treated as an identification exercise. Model name, generation and engine are the starting points, but the final choice might depend on the production month, body, gearbox, axle, steering side and factory option codes. The aim is to select a part that fits, connects and performs exactly as the vehicle specification requires.
Applications represented in the selector include LS, CONTINENTAL TOWN CAR, NAVIGATOR (UN173), TOWN CAR II, TOWN CAR III, TOWN CAR Saloon and CONTINENTAL Saloon. This is useful orientation, not a substitute for the final application checks. Where a model appears more than once, the body designation or code may identify a separate generation or derivative.
How to identify the exact application
- Record the registration, VIN, model series and build date.
- Confirm the engine or motor, fuel type, gearbox and driven axle.
- Note the body style, wheelbase, trim and any sports, towing or heavy-duty package.
- Diagnose the failed arrangement and record fault codes or measurements before clearing them.
- Compare OE or cross-reference numbers, dimensions, connections, fitting position and included hardware.
- Read the installation notes for production splits, paired replacement, calibration and single-use fasteners.
For passenger vehicles, pay particular attention to engine code, body, brake package and transmission. If the removed component is available, compare it prior to dismantling the vehicle further, while remembering that an approved supersession can have a revised appearance.
Lincoln model and body references
| Selector model | Application context | Details still specified |
|---|---|---|
| LS | passenger-vehicle model series | Establish generation, build date, powertrain and fitted equipment. |
| CONTINENTAL TOWN CAR | passenger-vehicle model series | Establish generation, build date, powertrain and fitted equipment. |
| NAVIGATOR (UN173) | passenger-vehicle model series | Confirm generation, build date, powertrain and fitted equipment. |
| TOWN CAR II | passenger-vehicle model series | Confirm generation, build date, powertrain and fitted equipment. |
| TOWN CAR III | passenger-vehicle model series | Confirm generation, build date, powertrain and fitted equipment. |
| TOWN CAR Saloon | saloon body application | Confirm generation, build date, powertrain and fitted equipment. |
| CONTINENTAL Saloon | saloon body application | Confirm generation, build date, powertrain and fitted equipment. |
Model tables help organise a search, but they cannot show every engine, market or running change. A model sold over several years can use differing filters, sensors, brakes or belts. Where the listing specifies a chassis range, engine code or “from/to” date, treat that note as component of the fitment requirement.
Model-specific service focus
LS
The practical focus for this passenger-vehicle model series is to identify the powertrain and compare filter dimensions, sealing faces and service specification. Record the identification marks and measurements from the fitted component, then compare them with the LS listing. Include related seals, clips and single-use fasteners in the job plan where the service procedure calls for them.
CONTINENTAL TOWN CAR
For this passenger-vehicle model series, record the axle and braking arrangement, then compare disc or drum size, friction shape and fitting hardware. The CONTINENTAL TOWN CAR name may span more than one derivative, so retain the selector's body or series code and reconcile it with the VIN, build date and removed part before ordering.
NAVIGATOR (UN173)
The practical focus for this passenger-vehicle model series is to use the engine code to verify belt profile, length or tooth count and the complete tensioning arrangement. Record the identification marks and measurements from the fitted component, then compare them with the NAVIGATOR (UN173) listing. Include related seals, clips and single-use fasteners in the job plan where the service procedure calls for them.
TOWN CAR II
For this passenger-vehicle model series, verify the lamp function, cap, voltage, optical approval and exact front, rear, left or right position. The TOWN CAR II name might span more than one derivative, so retain the selector's body or series code and reconcile it with the VIN, build date and removed part before ordering.
TOWN CAR III
For this passenger-vehicle model series, match the engine-management generation, connector, plug or distributor specification and electrical rating. The TOWN CAR III name may span more than one derivative, so retain the selector's body or series code and reconcile it with the VIN, build date and removed component prior to ordering.
Parts represented in this collection
Current product evidence for Lincoln is concentrated around filters and routine service, braking, belts and timing, lighting and visibility and ignition and starting. Availability may change, and one category label may contain several designs. Use the table as an inspection guide, then rely on the individual product record for the final specification.
| Arrangement area | Important matching points | Related inspection |
|---|---|---|
| Filters and routine service | Match engine code, dimensions, sealing arrangement and specified interval. | Inspect neighbouring components prior to ordering. |
| Braking | Check axle, disc or drum dimensions, caliper arrangement and any approval marking. | Examine neighbouring parts before ordering. |
| Belts and timing | Confirm engine code, tooth or rib count, length and tensioning layout. | Inspect neighbouring components ahead of ordering. |
| Lighting and visibility | Check lamp function, voltage, cap, homologation and left/right position. | Inspect neighbouring components ahead of ordering. |
| Ignition and starting | Confirm engine management setup, plug specification, connector and output rating. | Assess neighbouring parts before ordering. |
What reliable performance depends on
| Factor | Effect on the repair | Practical control |
|---|---|---|
| Exact application | A near match can bolt on yet have the wrong travel, output, pressure, friction area or calibration. | Check every listed dimension, code and fitting note. |
| Assembly condition | Wear, blockage, poor alignment or electrical faults elsewhere might damage a replacement. | Inspect the complete assembly and appropriate the root cause. |
| Materials and fluids | Seals, friction materials and lubricants must tolerate the intended temperature and chemistry. | Use the specified grade, approval and cleaning method. |
| Installation | Contamination, incorrect torque or poor routing causes leaks, noise and early failure. | Follow model-specific service details with suitable tools. |
| Commissioning | Some setups require bleeding, priming, bedding, coding or calibration. | Complete the prescribed procedure before road use. |
Diagnosis ahead of replacement
Before ordering, reproduce the symptom safely and examine the complete circuit or mechanical assembly. Look for contamination, chafed cables, corroded terminals, cracked hoses, loose mountings and abnormal wear patterns. Diagnostic equipment is valuable when interpreted alongside physical checks; replacing a part solely because its name appears in a code is a common and costly error.
Compare symptoms across operating states: cold and hot, stationary and moving, lightly and heavily loaded. For this car, relevant stresses may include journey length, load, road salt, towing, heat cycles and urban stop-start use. A fault that appears only under one condition often provides a better clue than the loudest symptom.
Construction, materials and specification
Automotive components combine metals, elastomers, engineering plastics, friction compounds and electronic materials. Their grade and treatment matter. Heat-resistant rubber used in a coolant circuit is not automatically safe for fuel; a high-strength bolt is not interchangeable with one of the identical diameter but a differing pitch or tightening method; and a lamp with the identical cap may have a differing wattage or optical purpose.
| Specification | Typical variation | Why to verify it |
|---|---|---|
| Dimensions | Diameter, thickness, length, pitch, mounting centres and connector geometry. | Small differences may prevent fitment or change operating clearance. |
| Position | Front/rear, left/right, inner/outer, upper/lower or cylinder-specific. | Opposite-side components can look alike but have mirrored fittings. |
| Rating | Load, pressure, voltage, current, temperature, speed or friction class. | A lower or unsuitable rating might create a safety or durability problem. |
| Material | Steel, alloy, rubber compound, polymer, ceramic or composite. | Material controls corrosion, flexibility, heat tolerance and chemical compatibility. |
| Approval | Vehicle-maker specification, E-marking or category-specific standard. | Road-use and arrangement requirements might depend on the correct approval. |
Technology and application changes
Vehicle assemblies have evolved through better corrosion protection, tighter emissions control, networked electronics and more integrated assemblies. A superseded replacement can not look identical to the removed component, yet it may still be appropriate when the manufacturer cross-reference and technical data agree. Conversely, visual similarity alone never confirms interchangeability.
Networked control modules could require service mode, basic settings or calibration after mechanical work. Steering-angle, tyre-pressure, braking, lighting and emissions setups may all retain fault guidance. Use a diagnostic process suited to the vehicle; do not disconnect the battery as a universal reset, because doing so may lose learned values without curing the cause.
Wear, inspection and repair urgency
| Finding | Possible meaning | Recommended response |
|---|---|---|
| Fluid leak or fuel smell | Failed seal, hose, housing or joint. | Stop and investigate immediately if fuel or brake fluid is involved. |
| Grinding, knocking or increasing vibration | Excessive wear, looseness, contact or imbalance. | Avoid further use when steering, braking, wheels or drivetrain security can be affected. |
| Warning lamp or message | A monitored value or circuit is outside its expected range. | Read codes and test the setup; do not erase evidence first. |
| Uneven wear or pulling | Misalignment, restricted movement, pressure imbalance or tyre issue. | Assess both sides and measure the related geometry. |
| Overheating or burning odour | Drag, overload, poor cooling, short circuit or slipping drive. | Stop safely and allow diagnosis before further damage occurs. |
| Intermittent operation | Loose connection, moisture, heat-sensitive electronics or internal wear. | Test under the conditions that reproduce the fault. |
Maintenance and installation guidance
Plan the job prior to lifting or isolating the vehicle. Obtain the repair procedure, tightening values, fluid specification and any special tools. Support the vehicle on rated stands at approved points; a jack is a lifting device, not safe working support. Protect painted surfaces from aggressive fluids and use eye, hand and respiratory protection appropriate to the task.
Keep open hydraulic, fuel, intake and cooling setups clean. Start threads by hand, replace disturbed seals and single-use fixings where instructed, and route cables or hoses through their original clips. On paired safety components, follow the service guidance for axle or side-to-side replacement. Mixing incompatible friction materials, fluids or component ratings may create imbalance.
Following assembly, turn or move the mechanism by hand where appropriate, restore fluids, prime or bleed the circuit and reconnect arrangements in the specified sequence. Complete coding or calibration, then carry out a static check before a controlled low-speed test. Reinspect for leaks, heat, warning lamps, abnormal noise and loose fixings.
Common ordering and fitting mistakes
- Choosing by model name or image while ignoring build date and technical notes.
- Confusing a body designation with a distinct generation carrying the corresponding badge.
- Failing to review front/rear, left/right, axle or engine position.
- Assuming registration lookup removes the need to compare dimensions and references.
- Replacing a sensor without testing wiring, power, ground and the mechanical arrangement it monitors.
- Reusing locking hardware, seals or torque-to-yield bolts against the repair instruction.
- Applying general grease or sealant to a setup that requires a compatible specialist product.
- Skipping bleeding, bedding, priming, coding, service mode or calibration.
Upgrades, modifications and UK road use
An upgrade must answer a defined require such as heat capacity, load, corrosion resistance or repeated heavy use. A component described as performance-oriented is not automatically better for a road vehicle: cold response, noise, comfort, emissions compatibility and service life may be worse outside its intended operating window. Review how the change affects connected setups and declare relevant modifications to the insurer.
Brakes, tyres, steering, suspension, lamps, glazing, emissions equipment and warning arrangements may affect roadworthiness and the MOT result. An MOT is a minimum-condition check on the test date, not a maintenance schedule or proof that every part is appropriate. The vehicle must remain safe and roadworthy between tests, and lighting, emissions or safety parts ought to retain the approvals required for their application.
Lincoln components FAQs
Q: How do I verify a part fits my Lincoln?
A: Start with registration or VIN data, then match model series, build date, engine or motor, gearbox, position, dimensions, connector and reference numbers.
Q: Why does the identical model show more than one component?
A: Production changes, engine choices, body styles and optional equipment may create several valid specifications within one model name.
Q: Is a registration lookup conclusive?
A: It is a strong starting point, but imported vehicles, running changes and factory options mean the listing details and removed component must still be checked.
Q: May I order from the product photograph?
A: No. Images help recognition but can not show dimension, internal rating, pin function, side or production split.
Q: Must I use the VIN or engine code?
A: Use both when available. The VIN identifies the vehicle build, while the engine code may resolve powertrain-specific service components.
Q: Do related components require replacement at the corresponding time?
A: Replace pairs, kits, seals and single-use hardware where the manufacturer instructs, and always inspect the complete surrounding assembly.
Q: What causes a new part to fail early?
A: Common causes include incorrect application, contamination, unresolved arrangement faults, wrong fluids, poor alignment and omitted commissioning steps.
Q: Does a fault code prove a sensor is faulty?
A: No. It records a detected condition. Wiring, supply, ground, leaks or mechanical faults may produce the corresponding code.
Q: May I fit Lincoln parts myself?
A: Only where you have the specified guidance, tools and competence. Safety-critical and high-voltage work must be handled by an appropriately trained person.
Q: What must be checked once fitting?
A: Recheck torque, routing, fluid level, leaks, warning lamps and normal operation, then complete any bedding, calibration or controlled road test specified.
Q: Could the fault affect the MOT?
A: Yes, if it affects braking, steering, tyres, suspension, visibility, lighting, emissions, structure or a monitored safety setup.
Q: When needs to the vehicle not be driven?
A: Stop when there is impaired braking or steering, an insecure wheel, fuel or brake-fluid leakage, severe overheating, restricted visibility or another immediate safety risk.